- 25 9月, 2008 40 次提交
-
-
由 Chris Mason 提交于
The allocation trees and the chunk trees are serialized via their own dedicated mutexes. This means allocation location is still not very fine grained. The main FS btree is protected by locks on each block in the btree. Locks are taken top / down, and as processing finishes on a given level of the tree, the lock is released after locking the lower level. The end result of a search is now a path where only the lowest level is locked. Releasing or freeing the path drops any locks held. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
If a bio submission is after a lock holder waiting for the bio on the work queue, it is possible to deadlock. Move the bios into their own pool. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Christoph Hellwig 提交于
Split the ioctl handling out of inode.c into a file of it's own. Also fix up checkpatch.pl warnings for the moved code. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
mount -o thread_pool_size changes the default, which is min(num_cpus + 2, 8). Larger thread pools would make more sense on very large disk arrays. This mount option controls the max size of each thread pool. There are multiple thread pools, so the total worker count will be larger than the mount option. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Btrfs has been using workqueues to spread the checksumming load across other CPUs in the system. But, workqueues only schedule work on the same CPU that queued the work, giving them a limited benefit for systems with higher CPU counts. This code adds a generic facility to schedule work with pools of kthreads, and changes the bio submission code to queue bios up. The queueing is important to make sure large numbers of procs on the system don't turn streaming workloads into random workloads by sending IO down concurrently. The end result of all of this is much higher performance (and CPU usage) when doing checksumming on large machines. Two worker pools are created, one for writes and one for endio processing. The two could deadlock if we tried to service both from a single pool. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Christoph Hellwig 提交于
Also adds lots of comments to describe what's going on here. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Sage Weil 提交于
These ioctls let a user application hold a transaction open while it performs a series of operations. A final ioctl does a sync on the fs (closing the current transaction). This is the main requirement for Ceph's OSD to be able to keep the data it's storing in a btrfs volume consistent, and AFAICS it works just fine. The application would do something like fd = ::open("some/file", O_RDONLY); ::ioctl(fd, BTRFS_IOC_TRANS_START); /* do a bunch of stuff */ ::ioctl(fd, BTRFS_IOC_TRANS_END); or just ::close(fd); And to ensure it commits to disk, ::ioctl(fd, BTRFS_IOC_SYNC); When a transaction is held open, the trans_handle is attached to the struct file (via private_data) so that it will get cleaned up if the process dies unexpectedly. A held transaction is also ended on fsync() to avoid a deadlock. A misbehaving application could also deliberately hold a transaction open, effectively locking up the FS, so it may make sense to restrict something like this to root or something. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Sven Wegener 提交于
We need to invalidate an existing dcache entry after creating a new snapshot or subvolume, because a negative dache entry will stop us from accessing the new snapshot or subvolume. --- ctree.h | 23 +++++++++++++++++++++++ inode.c | 4 ++++ transaction.c | 4 ++++ 3 files changed, 31 insertions(+) Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
* Force chunk allocation when find_free_extent has to do a full scan * Record the max key at the start of defrag so it doesn't run forever * Block groups might not be contiguous, make a forward search for the next block group in extent-tree.c * Get rid of extra checks for total fs size * Fix relocate_one_reference to avoid relocating the same file data block twice when referenced by an older transaction * Use the open device count when allocating chunks so that we don't try to allocate from devices that don't exist Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
The async submit workqueue was absorbing too many requests, leading to long stalls where the async submitters were stalling. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Before, nodatacow only checked to make sure multiple roots didn't have references on a single extent. This check makes sure that multiple inodes don't have references. nodatacow needed an extra check to see if the block group was currently readonly. This way cows forced by the chunk relocation code are honored. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
This required a few structural changes to the code that manages bdev pointers: The VFS super block now gets an anon-bdev instead of a pointer to the lowest bdev. This allows us to avoid swapping the super block bdev pointer around at run time. The code to read in the super block no longer goes through the extent buffer interface. Things got ugly keeping the mapping constant. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Sage Weil 提交于
Add a new ioctl to clone file data Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
This significantly improves streaming write performance by allowing concurrency in the data checksumming. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
This allows checksumming to happen in parallel among many cpus, and keeps us from bogging down pdflush with the checksumming code. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Block headers now store the chunk tree uuid Chunk items records the device uuid for each stripes Device extent items record better back refs to the chunk tree Block groups record better back refs to the chunk tree The chunk tree format has also changed. The objectid of BTRFS_CHUNK_ITEM_KEY used to be the logical offset of the chunk. Now it is a chunk tree id, with the logical offset being stored in the offset field of the key. This allows a single chunk tree to record multiple logical address spaces, upping the number of bytes indexed by a chunk tree from 2^64 to 2^128. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
On huge machines, delayed allocation may try to allocate massive extents. This change allows btrfs_alloc_extent to return something smaller than the caller asked for, and the data allocation routines will loop over the allocations until it fills the whole delayed alloc. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Before, metadata checksumming was done by the callers of read_tree_block, which would set EXTENT_CSUM bits in the extent tree to show that a given range of pages was already checksummed and didn't need to be verified again. But, those bits could go away via try_to_releasepage, and the end result was bogus checksum failures on pages that never left the cache. The new code validates checksums when the page is read. It is a little tricky because metadata blocks can span pages and a single read may end up going via multiple bios. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
This allows detection of blocks that have already been written in the running transaction so they can be recowed instead of modified again. It is step one in trusting the transid field of the block pointers. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
This allows intelligent versions of unplug and congestion functions Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
When we checkum file data during writepage, the checksumming is done one page at a time, making it difficult to do bulk metadata modifications to insert checksums for large ranges of the file at once. This patch changes btrfs to checksum on a per-bio basis instead. The bios are checksummed before they are handed off to the block layer, so each bio is contiguous and only has pages from the same inode. Checksumming on a bio basis allows us to insert and modify the file checksum items in large groups. It also allows the checksumming to be done more easily by async worker threads. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 David Miller 提交于
Btrfs set/get macros lose type information needed to avoid unaligned accesses on sparc64. ere is a patch for the kernel bits which fixes most of the unaligned accesses on sparc64. btrfs_name_hash is modified to return the hash value instead of getting a return location via a (potentially unaligned) pointer. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-