- 14 4月, 2010 5 次提交
-
-
由 Tom Zanussi 提交于
Bypasses the tracing_data perf header code and replaces it with a synthesized event and processing function that accomplishes the same thing, used when reading/writing perf data to/from a pipe. The tracing data is pretty large, and this patch doesn't attempt to break it down into component events. The tracing_data event itself doesn't actually contain the tracing data, rather it arranges for the event processing code to skip over it after it's read, using the skip return value added to the event processing loop in a previous patch. Signed-off-by: NTom Zanussi <tzanussi@gmail.com> Acked-by: NThomas Gleixner <tglx@linutronix.de> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org Cc: k-keiichi@bx.jp.nec.com Cc: acme@ghostprotocols.net LKML-Reference: <1270184365-8281-8-git-send-email-tzanussi@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Tom Zanussi 提交于
Bypasses the event type perf header code and replaces it with a synthesized event and processing function that accomplishes the same thing, used when reading/writing perf data to/from a pipe. Signed-off-by: NTom Zanussi <tzanussi@gmail.com> Acked-by: NThomas Gleixner <tglx@linutronix.de> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org Cc: k-keiichi@bx.jp.nec.com Cc: acme@ghostprotocols.net LKML-Reference: <1270184365-8281-7-git-send-email-tzanussi@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Tom Zanussi 提交于
Bypasses the attr perf header code and replaces it with a synthesized event and processing function that accomplishes the same thing, used when reading/writing perf data to/from a pipe. Making the attrs into events allows them to be streamed over a pipe along with the rest of the header data (in later patches). It also paves the way to allowing events to be added and removed from perf sessions dynamically. Signed-off-by: NTom Zanussi <tzanussi@gmail.com> Acked-by: NThomas Gleixner <tglx@linutronix.de> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org Cc: k-keiichi@bx.jp.nec.com Cc: acme@ghostprotocols.net LKML-Reference: <1270184365-8281-6-git-send-email-tzanussi@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Tom Zanussi 提交于
Adds special treatment for stdin - if the user specifies '-i -' to perf report, the intent is that the event stream be written to stdin rather than from a disk file. The actual handling of the '-' filename is done by the session; this just adds a signal handler to stop reporting, and turns off interference by the pager. Signed-off-by: NTom Zanussi <tzanussi@gmail.com> Acked-by: NThomas Gleixner <tglx@linutronix.de> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org Cc: k-keiichi@bx.jp.nec.com Cc: acme@ghostprotocols.net LKML-Reference: <1270184365-8281-4-git-send-email-tzanussi@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ian Munsie 提交于
Parsing an option from the command line with OPT_BOOLEAN on a bool data type would not work on a big-endian machine due to the manner in which the boolean was being cast into an int and incremented. For example, running 'perf probe --list' on a PowerPC machine would fail to properly set the list_events bool and would therefore print out the usage information and terminate. This patch makes OPT_BOOLEAN work as expected with a bool datatype. For cases where the original OPT_BOOLEAN was intentionally being used to increment an int each time it was passed in on the command line, this patch introduces OPT_INCR with the old behaviour of OPT_BOOLEAN (the verbose variable is currently the only such example of this). I have reviewed every use of OPT_BOOLEAN to verify that a true C99 bool was passed. Where integers were used, I verified that they were only being used for boolean logic and changed them to bools to ensure that they would not be mistakenly used as ints. The major exception was the verbose variable which now uses OPT_INCR instead of OPT_BOOLEAN. Signed-off-by: NIan Munsie <imunsie@au.ibm.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Cc: <stable@kernel.org> # NOTE: wont apply to .3[34].x cleanly, please backport Cc: Git development list <git@vger.kernel.org> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Eric B Munson <ebmunson@us.ibm.com> Cc: Valdis.Kletnieks@vt.edu Cc: WANG Cong <amwang@redhat.com> Cc: Thiago Farina <tfransosi@gmail.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Mike Galbraith <efault@gmx.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Anton Blanchard <anton@samba.org> Cc: John Kacur <jkacur@redhat.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1271147857-11604-1-git-send-email-imunsie@au.ibm.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 03 4月, 2010 6 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
So that it can use it in the 'perf annotate' command line, otherwise it'll use the default and not the specified -i filename passed to 'perf report'. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <new-submission> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
So that we avoid conflict with libc's string.h header. Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Suggested-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
Propagate error instead. LKML-Reference: <new-submission> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
Return NULL instead and make the caller propagate the error. LKML-Reference: <new-submission> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
The struct callchain_node size is 120 bytes, that are never used when there are no callchains or '-g none' is specified, so conditionally allocate it, reducing sizeof(struct hist_entry) from 210 bytes to only 96, greatly speeding the non-callchain processing. LKML-Reference: <new-submission> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
For when we are processing the events and inserting the entries in the browser. Experimentation here: naming "ui_something" we may be treading into creating a TUI/GUI set of routines that can then be implemented in terms of multiple backends. Also the time it takes for adding things to the "browser" takes, visually (I guess I should do some profiling here ;-) ), more time than for processing the events... That means we probably need to create a custom hist_entry browser, so that we reuse the structures we have in place instead of duplicating them in newt. But progress was made and at least we can see something while long files are being loaded, that must be one of UI 101 bullet points :-) Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 26 3月, 2010 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
We need this to know where a symbol in a callchain came from, for various reasons, among them precise annotation from a TUI/GUI tool. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1269459619-982-5-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 23 3月, 2010 1 次提交
-
-
由 Frederic Weisbecker 提交于
Callchains have markers inside their capture to tell we enter a context (kernel, user, ...). Those are not displayed in the callchains but they are incidentally an active part of the radix tree where callchains are stored, just like any other address. If we have the two following callchains: addr1 -> addr2 -> user context -> addr3 addr1 -> addr2 -> user context -> addr4 addr1 -> addr2 -> addr 5 This is pretty common if addr1 and addr2 are part of an interrupt path, addr3 and addr4 are user addresses and addr5 is a kernel non interrupt path. This will be stored as follows in the tree: addr1 addr2 / \ / addr5 user context / \ addr3 addr4 But we ignore the context markers in the report, hence the addr3 and addr4 will appear as orphan branches: |--28.30%-- hrtimer_interrupt | smp_apic_timer_interrupt | apic_timer_interrupt | | <------------- here, no parent! | | | | | |--11.11%-- 0x7fae7bccb875 | | | | | |--11.11%-- 0xffffffffff60013b | | | | | |--11.11%-- __pthread_mutex_lock_internal | | | | | |--11.11%-- __errno_location Fix this by removing the context markers when we process the callchains to the tree. Reported-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1269274173-20328-1-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 12 3月, 2010 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
Newt has widespread availability and provides a rather simple API as can be seen by the size of this patch. The work needed to support it will benefit other frontends too. In this initial patch it just checks if the output is a tty, if not it falls back to the previous behaviour, also if newt-devel/libnewt-dev is not installed the previous behaviour is maintaned. Pressing enter on a symbol will annotate it, ESC in the annotation window will return to the report symbol list. More work will be done to remove the special casing in color_fprintf, stop using fmemopen/FILE in the printing of hist_entries, etc. Also the annotation doesn't need to be done via spawning "perf annotate" and then browsing its output, we can do better by calling directly the builtin-annotate.c functions, that would then be moved to tools/perf/util/annotate.c and shared with perf top, etc But lets go by baby steps, this patch already improves perf usability by allowing to quickly do annotations on symbols from the report screen and provides a first experimentation with libnewt/TUI integration of tools. Tested on RHEL5 and Fedora12 X86_64 and on Debian PARISC64 to browse a perf.data file collected on a Fedora12 x86_64 box. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Avi Kivity <avi@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1268349164-5822-5-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 10 3月, 2010 3 次提交
-
-
由 Eric B Munson 提交于
Perf report does not handle multiple events being reported, even though perf record stores them properly on disk. This patch addresses that issue by adding the logic to perf report to use the event stream id that is saved by record and the new data structures to seperate the event streams and report them individually. Signed-off-by: NEric B Munson <ebmunson@us.ibm.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1267804269-22660-6-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Eric B Munson 提交于
Now that report can store historgrams for multiple events we need to be able to do the post processing work for each histogram. This patch changes the post processing functions so that they can be called individually for each event's histogram. Signed-off-by: NEric B Munson <ebmunson@us.ibm.com> [ Guarantee bisectabilty by fixing up builtin-report.c ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1267804269-22660-5-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Eric B Munson 提交于
In order to minimize the impact of storing multiple events in a report this function will now take the root of the histogram tree so that the logic for selecting the proper tree can be inserted before the call. Signed-off-by: NEric B Munson <ebmunson@us.ibm.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1267804269-22660-3-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 27 1月, 2010 1 次提交
-
-
由 Yong Wang 提交于
Segmentation fault occurs when running perf report with '-g none'. Reported-by: NAustin Zhang <austin.zhang@intel.com> Signed-off-by: NYong Wang <yong.y.wang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100122014750.GA4111@ywang-moblin2.bj.intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 16 1月, 2010 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
Since they can come from another architecture with bigger pointers, i.e. processing a 64-bit perf.data on a 32-bit arch. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1263478990-8200-1-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 13 1月, 2010 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
To avoid the funny: [root@doppio ~]# perf record -a -f sleep 2s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.334 MB perf.data (~14572 samples) ] [root@doppio ~]# perf report --no-call-graph selected -g but no callchain data. Did you call perf record without -g? And fix the bug reported by peterz when we do indeed record with callchains and then ask for a report without: [root@doppio ~]# perf record -a -g -f sleep 2s [root@doppio ~]# perf report --no-call-graph Segmentation fault [root@doppio ~]# Reported-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1262699685-27820-1-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 30 12月, 2009 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
Useful to match the 'overhead' column in 'perf report' with the 'baseline' one in 'perf diff'. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1262047716-23171-3-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 28 12月, 2009 3 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
Since now all that we have are perf event handlers, leave just the name of the event. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1261957026-15580-9-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Arnaldo Carvalho de Melo 提交于
Now perf_event_ops has just that, event handlers. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1261957026-15580-8-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Arnaldo Carvalho de Melo 提交于
This is really something tools need to do before asking for the events to be processed, leaving perf_session__process_events to do just that, process events. Also add a msg parameter to perf_session__has_traces() so that the right message can be printed, fixing a regression added by me in the previous cset (right timechart message) and also fixing 'perf kmem', that was not asking if 'perf kmem record' was ran. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1261957026-15580-6-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 19 12月, 2009 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
Fixing this: [acme@doppio linux-2.6-tip]$ perf diff --hell Error: unknown option `hell' usage: perf diff [<options>] [old_file] [new_file] Segmentation fault [acme@doppio linux-2.6-tip]$ Also go over the other such arrays to check if they all were OK, they are, but there were some minor changes to do like making one static and renaming another to match the command it refers to. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1261161358-23959-1-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 18 12月, 2009 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
Pekka Enberg reported weird percentages in perf report. It turns out we are overflowing a 32-bit variables in struct events_stats on 32-bit architectures. Before: [acme@ana linux-2.6-tip]$ perf report -i pekka.perf.data 2> /dev/null | head -10 281.96% Xorg b710a561 [.] 0x000000b710a561 140.15% Xorg [kernel] [k] __initramfs_end 51.56% metacity libgobject-2.0.so.0.2000.1 [.] 0x00000000026e46 35.12% evolution libcairo.so.2.10800.6 [.] 0x000000000203bd 33.84% metacity libpthread-2.9.so [.] 0x00000000007a3d After: [acme@ana linux-2.6-tip]$ perf report -i pekka.perf.data 2> /dev/null | head -10 30.04% Xorg b710a561 [.] 0x000000b710a561 14.93% Xorg [kernel] [k] __initramfs_end 5.49% metacity libgobject-2.0.so.0.2000.1 [.] 0x00000000026e46 3.74% evolution libcairo.so.2.10800.6 [.] 0x000000000203bd 3.61% metacity libpthread-2.9.so [.] 0x00000000007a3d Reported-by: NPekka Enberg <penberg@cs.helsinki.fi> Tested-by: NPekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1261148583-20395-1-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 16 12月, 2009 8 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
That means that almost everything you can do with 'perf report' can be done with 'perf diff', for instance: $ perf record -f find / > /dev/null [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.062 MB perf.data (~2699 samples) ] $ perf record -f find / > /dev/null [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.062 MB perf.data (~2687 samples) ] perf diff | head -8 9.02% +1.00% find libc-2.10.1.so [.] _IO_vfprintf_internal 2.91% -1.00% find [kernel] [k] __kmalloc 2.85% -1.00% find [kernel] [k] ext4_htree_store_dirent 1.99% -1.00% find [kernel] [k] _atomic_dec_and_lock 2.44% find [kernel] [k] half_md4_transform $ So if you want to zoom into libc: $ perf diff --dsos libc-2.10.1.so | head -8 37.34% find [.] _IO_vfprintf_internal 10.34% find [.] __GI_memmove 8.25% +2.00% find [.] _int_malloc 5.07% -1.00% find [.] __GI_mempcpy 7.62% +2.00% find [.] _int_free $ And if there were multiple commands using libc, it is also possible to aggregate them all by using --sort symbol: $ perf diff --dsos libc-2.10.1.so --sort symbol | head -8 37.34% [.] _IO_vfprintf_internal 10.34% [.] __GI_memmove 8.25% +2.00% [.] _int_malloc 5.07% -1.00% [.] __GI_mempcpy 7.62% +2.00% [.] _int_free $ The displacement column now is off by default, to use it: perf diff -m --dsos libc-2.10.1.so --sort symbol | head -8 37.34% [.] _IO_vfprintf_internal 10.34% [.] __GI_memmove 8.25% +2.00% [.] _int_malloc 5.07% -1.00% +2 [.] __GI_mempcpy 7.62% +2.00% -1 [.] _int_free $ Using -t/--field-separator can be used for scripting: $ perf diff -t, -m --dsos libc-2.10.1.so --sort symbol | head -8 37.34, , ,[.] _IO_vfprintf_internal 10.34, , ,[.] __GI_memmove 8.25,+2.00%, ,[.] _int_malloc 5.07,-1.00%, +2,[.] __GI_mempcpy 7.62,+2.00%, -1,[.] _int_free 6.99,+1.00%, -1,[.] _IO_new_file_xsputn 1.89,-2.00%, +4,[.] __readdir64 $ Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1260978567-550-1-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Arnaldo Carvalho de Melo 提交于
Introduced in: d599db3f "perf report: Generalize perf_session__fprintf_hists()" Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1260973631-28035-3-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Arnaldo Carvalho de Melo 提交于
Those don't make sense for tools such as 'perf diff'. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1260973631-28035-2-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Arnaldo Carvalho de Melo 提交于
Will be used in other tools such as 'perf diff'. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1260973631-28035-1-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Arnaldo Carvalho de Melo 提交于
Pull it out of builtin-report - further changes will be made and it will then be reusable in 'perf diff' as well. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1260914682-29652-4-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Arnaldo Carvalho de Melo 提交于
So that --dsos, --comm, --symbols can bem used in more tools, like in perf diff: $ perf record -f find / > /dev/null $ perf record -f find / > /dev/null $ perf diff --dsos /lib64/libc-2.10.1.so | head -5 1 +22392124 /lib64/libc-2.10.1.so _IO_vfprintf_internal 2 +6410655 /lib64/libc-2.10.1.so __GI_memmove 3 +1 +9192692 /lib64/libc-2.10.1.so _int_malloc 4 -1 -15158605 /lib64/libc-2.10.1.so _int_free 5 +45669 /lib64/libc-2.10.1.so _IO_new_file_xsputn $ Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1260914682-29652-3-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Arnaldo Carvalho de Melo 提交于
Will be used in perf diff too. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1260914682-29652-2-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Arnaldo Carvalho de Melo 提交于
This simplifies a lot of functions, less stuff to be done by tool writers. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1260914682-29652-1-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 15 12月, 2009 5 次提交
-
-
由 Frederic Weisbecker 提交于
perf top, report and annotate all define their own symbol_conf, it should be static. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1260843322-6602-1-git-send-regression-fweisbec@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Arnaldo Carvalho de Melo 提交于
And it is also needed by 'perf diff'. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1260828571-3613-1-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1260810361-22828-1-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Arnaldo Carvalho de Melo 提交于
All tools had copies, and perf diff would have to specify a sample_type_check method just for copying it. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1260807780-19377-2-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Arnaldo Carvalho de Melo 提交于
This is really a generic library routine, so declutter builtin-report.c a bit by moving it to the library. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1260807780-19377-1-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 14 12月, 2009 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
As we'll need to sort multiple times for multiple perf sessions, so that we can then do a diff. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1260803439-16783-1-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-