Replace the jbd2_inode structure (which is 48 bytes) with a pointer
and only allocate the jbd2_inode when it is needed --- that is, when
the file system has a journal present and the inode has been opened
for writing.  This allows us to further slim down the ext4_inode_info
structure.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

We can store the dynamic inode state flags in the high bits of
EXT4_I(inode)->i_flags, and eliminate i_state_flags.  This saves 8
bytes from the size of ext4_inode_info structure, which when
multiplied by the number of the number of in the inode cache, can save
a lot of memory.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

By reordering the elements in the ext4_inode_info structure, we can
reduce the padding needed on an x86_64 system by 16 bytes.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

We can encode the ec_type information by using ee_len == 0 to denote
EXT4_EXT_CACHE_NO, ee_start == 0 to denote EXT4_EXT_CACHE_GAP, and if
neither is true, then the cache type must be EXT4_EXT_CACHE_EXTENT.
This allows us to reduce the size of ext4_ext_inode by another 8
bytes.  (ec_type is 4 bytes, plus another 4 bytes of padding)
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This fixes a number of places where we used sector_t instead of
ext4_lblk_t for logical blocks, which for ext4 are still 32-bit data
types.  No point wasting space in the ext4_inode_info structure, and
requiring 64-bit arithmetic on 32-bit systems, when it isn't
necessary.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Remove the short element i_delalloc_reserved_flag from the
ext4_inode_info structure and replace it a new bit in i_state_flags.
Since we have an ext4_inode_info for every ext4 inode cached in the
inode cache, any savings we can produce here is a very good thing from
a memory utilization perspective.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

ext4_ext_find_goal() returns an ideal physical block number that the block
allocator tries to allocate first. However, if a required file offset is
smaller than the existing extent's one, ext4_ext_find_goal() returns
a wrong block number because it may overflow at
"block - le32_to_cpu(ex->ee_block)". This patch fixes the problem.

ext4_ext_find_goal() will also return a wrong block number in case
a file offset of the existing extent is too big. In this case,
the ideal physical block number is fixed in ext4_mb_initialize_context(),
so it's no problem.

reproduce:
# dd if=/dev/zero of=/mnt/mp1/tmp bs=127M count=1 oflag=sync
# dd if=/dev/zero of=/mnt/mp1/file bs=512K count=1 seek=1 oflag=sync
# filefrag -v /mnt/mp1/file
Filesystem type is: ef53
File size of /mnt/mp1/file is 1048576 (256 blocks, blocksize 4096)
 ext logical physical expected length flags
   0     128    67456             128 eof
/mnt/mp1/file: 2 extents found
# rm -rf /mnt/mp1/tmp
# echo $((512*4096)) > /sys/fs/ext4/loop0/mb_stream_req
# dd if=/dev/zero of=/mnt/mp1/file bs=512K count=1 oflag=sync conv=notrunc

result (linux-2.6.37-rc2 + ext4 patch queue):
# filefrag -v /mnt/mp1/file
Filesystem type is: ef53
File size of /mnt/mp1/file is 1048576 (256 blocks, blocksize 4096)
 ext logical physical expected length flags
   0       0    33280             128 
   1     128    67456    33407    128 eof
/mnt/mp1/file: 2 extents found

result(apply this patch):
# filefrag -v /mnt/mp1/file
Filesystem type is: ef53
File size of /mnt/mp1/file is 1048576 (256 blocks, blocksize 4096)
 ext logical physical expected length flags
   0       0    66560             128 
   1     128    67456    66687    128 eof
/mnt/mp1/file: 2 extents found
Signed-off-by: NKazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Check return value of ext4_journal_get_write_access,
ext4_journal_dirty_metadata and ext4_mark_inode_dirty. Move brelse()
under 'out_stop' to release bh properly in case of journal error.
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

ext4_ext_migrate() calls ext4_new_inode() and passes 0 instead of a pointer
to a struct qstr.  This patch uses NULL, to make it obvious to the caller
that this was a pointer.
Signed-off-by: NEric Paris <eparis@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Where the file pointer is available, use ext4_error_file() instead of
ext4_error_inode().
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

d_path() returns an ERR_PTR and it doesn't return NULL.  This is in
ext4_error_file() and no one actually calls ext4_error_file().
Signed-off-by: NDan Carpenter <error27@gmail.com>

This is a copy and paste error.  The intent was to check
"io_page_cachep".  We tested "io_page_cachep" earlier.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Reviewed-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NWang Sheng-Hui <crosslonelyover@gmail.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Signed-off-by: NWang Sheng-Hui <crosslonelyover@gmail.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Any time you see code that tries to add error codes together, you
should want to claw your eyes out...
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

ext4_issue_discard is supposed to be helper for calling discard, however
in case that underlying device does not support discard it prints out
the warning message and clears the DISCARD t_mount_opt flag. Since it
can be (and is) used by others, it should not do anything and let the
caller to handle the error case.

This commit removes warning message and flag setting from
ext4_issue_discard and use it just in place where it is really needed
(release_blocks_on_commit). FITRIM ioctl should not set any flags nor it
should print out warning messages, so get rid of the warning as well.
Signed-off-by: NLukas Czerner <lczerner@redhat.com>

When determining last group through ext4_get_group_no_and_offset() the
result may be wrong in cases when range->start and range-len are too
big, because it may overflow when summing up those two numbers.

Fix that by checking range->len and limit its value to
ext4_blocks_count(). This commit was tested by myself with expected
result.
Signed-off-by: NLukas Czerner <lczerner@redhat.com>

Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Using %pV reduces the number of printk calls and eliminates any
possible message interleaving from other printk calls.

In function __ext4_grp_locked_error also added KERN_CONT to some
printks.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

When nanosecond timestamp resolution isn't supported on an ext4
partition (inode size = 128), stat() appears to be returning
uninitialized garbage in the nanosecond component of timestamps.

EXT4_INODE_GET_XTIME should zero out tv_nsec when EXT4_FITS_IN_INODE
evaluates to false.
Reported-by: NJordan Russell <jr-list-2010@quo.to>
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This function gets called a lot for large directories, and the answer
is almost always "no, no, there's no problem".  This means using
unlikely() is a good thing.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Use advantage of kmem_cache_zalloc() to remove a memset() call in
ext4_init_io_end() and save a few bytes.

Before:
 [jj@dragon linux-2.6]$ size fs/ext4/page-io.o
    text    data     bss     dec     hex filename
    3016       0     624    3640     e38 fs/ext4/page-io.o
After:
 [jj@dragon linux-2.6]$ size fs/ext4/page-io.o
    text    data     bss     dec     hex filename
    3000       0     624    3624     e28 fs/ext4/page-io.o
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

IS_ERR() already implies unlikely(), so it can be omitted here.
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This is a port to jbd2 of a patch which Namhyung Kim <namhyung@gmail.com>
originally made to fs/jbd.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This is a port to jbd2 of a patch which Namhyung Kim <namhyung@gmail.com>
originally made to fs/jbd.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This is a port to jbd2 of a patch which Namhyung Kim <namhyung@gmail.com>
originally made to fs/jbd.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

'buffer_head' should be 'journal_head'

This is a port of a patch which Namhyung Kim <namhyung@gmail.com> made
to fs/jbd to jbd2.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

We had an open-coded version of printk_ratelimited(); use the provided
abstraction to make the code cleaner and easier to understand.

Based on a similar patch for fs/jbd from Namhyung Kim <namhyung@gmail.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

printk_ratelimit() is deprecated since it is a global instead of a
per-printk ratelimit.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This fixes up some broken argument descriptions that Namhyung Kim had
originally submitted for ext3.  This fixes the comments that were
still applicable in ext4.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Move the ext4_mount_options structure definition from ext4.h, since it
is only used in super.c.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Change clear_opt() and set_opt() to take a superblock pointer instead
of a pointer to EXT4_SB(sb)->s_mount_opt.  This makes it easier for us
to support a second mount option field.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: ghash-intel - ghash-clmulni-intel_glue needs err.h

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix typo which broke '..' detection in ext4_find_entry()
  ext4: Turn off multiple page-io submission by default

Without this, gcc 4.5 won't compile xen-netfront and xen-blkfront, where
this is being used to specify array sizes.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: David Miller <davem@davemloft.net>
Cc: Stable Kernel <stable@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The MSM main git tree has changed over to this new address.
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>