In may gadgets bind and bind like functions were in a init section
as they were only run during initialisation.  However, being
callback functions they were referenced from structures in “normal”
sections.  Changing the tag from “__init” to “__ref” fixes the
warnings.
Signed-off-by: NMichal Nazarewicz <m.nazarewicz@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The base versions handle constant folding now.
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Offer a "how much VBUS power to request" configuration option
for USB gadgets that aren't using board-specific customization
of their gadget or (composite) configuration drivers.

Also remove a couple pointless "depends on USB_GADGET" bits
from the Kconfig text; booleans inside an "if USB_GADGET" will
already have that dependency.

Based on a patch from Justin Clacherty.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Justin Clacherty <justin@redfish-group.com>
Tested-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Change how the CDC Composite gadget driver builds:  don't
use separate compilation, since it works poorly when key
parts are library code (with init sections etc).  Instead
be as close as we can to "gcc --combine ...".
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We want to use WARN() as a variant of WARN_ON(), however a few drivers are
using WARN() internally.  This patch renames these to WARNING() to avoid the
namespace clash.  A few cases were defining but not using the thing, for those
cases I just deleted the definition.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Acked-by: NGreg KH <greg@kroah.com>
Cc: Karsten Keil <kkeil@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

These two fixes ensure the new "CDC Composite Device" gadget
fails cleanly when it's loaded on hardware that can't support
this particular gadget driver.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is a simple example of a composite gadget, combining two
Communications Class Device (CDC) functions:  ECM and ACM.

This provides a clear example of how the composite gadget framework
is intended to work.  It's surprising that MS-Windows (or at least,
XP and previous) won't "just work" with something this simple...

One /proc/bus/usb/devices listing looks like:

  T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 46 Spd=480 MxCh= 0
  D:  Ver= 2.00 Cls=02(comm.) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
  P:  Vendor=0525 ProdID=a4aa Rev= 3.01
  S:  Manufacturer=Linux 2.6.26-rc6-pnut with net2280
  S:  Product=CDC Composite Gadget
  C:* #Ifs= 4 Cfg#= 1 Atr=c0 MxPwr=  2mA
  I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
  E:  Ad=83(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
  I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
  I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
  E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
  E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
  I:* If#= 2 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=cdc_acm
  E:  Ad=86(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
  I:* If#= 3 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm
  E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
  E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Not all USB peripheral controller hardware can support this driver.
All the highspeed-capable peripheral controllers with drivers now in
the mainline kernel seem to support this, as does omap_udc.  But
many full speed controllers don't have enough endpoints, or (as with
the PXA controllers) don't support altsettings.

Lightly tested.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>