- 08 12月, 2010 10 次提交
-
-
由 Alex Deucher 提交于
Avoid overflowing a 32 bit value. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
print the full 64 bit values. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
Forbid allocating buffer bigger than visible VRAM or GTT, also properly set lpfn field. v2 - use max macro - silence warning v3 - don't explicitly set range limit - use min macro Cc: stable <stable@kernel.org> Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Chris Wilson 提交于
Prevents code that assumes that the encoder is active when asked to be disabled from dying a horrible death. Reported-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Chris Wilson 提交于
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Kristian Høgsberg <krh@bitplanet.net> Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
Merge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel into drm-fixes
-
由 Chris Wilson 提交于
As we may try to power down the link at various times, it is not necessarily still coupled with an encoder and so we must be careful not to depend upon an operation that is only valid when the link is still attached to a pipe. Fixes regression in 5bddd17f. Reported-and-tested-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org [after applying 5bddd17f]
-
由 Linus Torvalds 提交于
Merge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: genirq: Fix incorrect proc spurious output
-
由 Linus Torvalds 提交于
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: wmi: use memcmp instead of strncmp to compare GUIDs ACPI, hp-wmi: Fix memory leak in acpi query msi-wmi: fix semantically incorrect use of keycode instead of scancode msi-wmi: Add mute key support asus-laptop: add wimax and wwan support eeepc-wmi: fix compiler warning ibm_rtl: _RTL_ is not available in UEFI mode ibm_rtl: Loosen the DMI criteria to all IBM machines drivers/platform/x86/thinkpad_acpi.c: delete double assignment eeepc-wmi: add cpufv sysfs documentation toshiba_acpi.c: Add key_entry for a lone FN keypress ibm_rtl: fix printk format warning
-
git://git390.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] css: fix rsid evaluation for 2nd crw [S390] nohz/s390: fix arch_needs_cpu() return value on offline cpus
-
- 07 12月, 2010 10 次提交
-
-
由 Ian Kent 提交于
With the recent changes to remove the BKL a mutex was added to the ioctl entry point for calls to the old ioctl interface. This mutex needs to be removed because of the need for the expire ioctl to call back to the daemon to perform a umount and receive a completion status (via another ioctl). This should be fine as the new ioctl interface uses much of the same code and it has been used without a mutex for around a year without issue, as was the original intention. Ref: Bugzilla bug 23142 Signed-off-by: NIan Kent <raven@themaw.net> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Chris Wilson 提交于
In order for bos to retire eventually, a request must be sent down the ring. This is expected, for example, by occlusion queries for which mesa will wait upon (whilst running glean) before issuing more batches and so the normal activity upon the ring is suspended and we need to emit a request to clear the idle ring. Reported-by: NJinjin, Wang <jinjin.wang@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30380Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: ocfs2_connection_find() returns pointer to bad structure ocfs2: char is not always signed Ocfs2: Stop tracking a negative dentry after dentry_iput(). ocfs2: fix memory leak fs/ocfs2/dlm: Use GFP_ATOMIC under spin_lock
-
由 Olof Johansson 提交于
Commit 0ea12930 ("arm: return both physical and virtual addresses from addruart") took out the test for MMU on/off but didn't switch the ldr instructions to no longer be conditionals based on said test. Fix that. Signed-off-by: NOlof Johansson <olof@lixom.net> Acked-by: NColin Cross <ccross@android.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6由 Linus Torvalds 提交于
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM / Hibernate: Fix memory corruption related to swap PM / Hibernate: Use async I/O when reading compressed hibernation image
-
由 Rafael J. Wysocki 提交于
There is a problem that swap pages allocated before the creation of a hibernation image can be released and used for storing the contents of different memory pages while the image is being saved. Since the kernel stored in the image doesn't know of that, it causes memory corruption to occur after resume from hibernation, especially on systems with relatively small RAM that need to swap often. This issue can be addressed by keeping the GFP_IOFS bits clear in gfp_allowed_mask during the entire hibernation, including the saving of the image, until the system is finally turned off or the hibernation is aborted. Unfortunately, for this purpose it's necessary to rework the way in which the hibernate and suspend code manipulates gfp_allowed_mask. This change is based on an earlier patch from Hugh Dickins. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Reported-by: NOndrej Zary <linux@rainbow-software.org> Acked-by: NHugh Dickins <hughd@google.com> Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: stable@kernel.org
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6524/1: GIC irq desciptor bug fix ARM: 6523/1: iop: ensure sched_clock() is notrace ARM: 6456/1: Fix for building DEBUG with sa11xx_base.c as a module. ARM: 6519/1: kuser: Fix incorrect cmpxchg syscall in kuser helpers ARM: 6505/1: kprobes: Don't HAVE_KPROBES when CONFIG_THUMB2_KERNEL is selected ARM: 6508/1: vexpress: Correct data alignment in headsmp.S for CONFIG_THUMB2_KERNEL ARM: 6507/1: RealView: Correct data alignment in headsmp.S for CONFIG_THUMB2_KERNEL ARM: 6504/1: Thumb-2: Fix long-distance conditional branches in head.S for Thumb-2. ARM: 6503/1: Thumb-2: Restore sensible zImage header layout for CONFIG_THUMB2_KERNEL ARM: 6502/1: Thumb-2: Fix CONFIG_THUMB2_KERNEL breakage in compressed/head.S ARM: 6501/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in mm/proc-v7.S ARM: 6500/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in kernel/head.S ARM: 6499/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in bootp/init.S ARM: 6498/1: vfp: Correct data alignment for CONFIG_THUMB2_KERNEL ARM: 6497/1: kexec: Correct data alignment for CONFIG_THUMB2_KERNEL ARM: 6496/1: GIC: Do not try to register more then NR_IRQS interrupts ARM: cns3xxx: Fix build with CONFIG_PCI=y
-
由 Bojan Smojver 提交于
This is a fix for reading LZO compressed image using async I/O. Essentially, instead of having just one page into which we keep reading blocks from swap, we allocate enough of them to cover the largest compressed size and then let block I/O pick them all up. Once we have them all (and here we wait), we decompress them, as usual. Obviously, the very first block we still pick up synchronously, because we need to know the size of the lot before we pick up the rest. Also fixed the copyright line, which I've forgotten before. Signed-off-by: NBojan Smojver <bojan@rexursive.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
While looking for the duplicates in /sys/class/wmi/, I couldn't find them. The code that looks for duplicates uses strncmp in a binary GUID, which may contain zero bytes. The right function is memcmp, which is also used in another section of wmi code. It was finding 49142400-C6A3-40FA-BADB-8A2652834100 as a duplicate of 39142400-C6A3-40FA-BADB-8A2652834100. Since the first byte is the fourth printed, they were found as equal by strncmp. Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com> Cc: stable@kernel.org
-
- 06 12月, 2010 8 次提交
-
-
-
由 Chao Xie 提交于
gic_set_cpu will directly use irq_desc[]. If CONFIG_SPARSE_IRQ is enabled, there is no irq_desc[]. So we need use irq_to_desc(irq) to get the descriptor for irq. Signed-off-by: NChao Xie <chao.xie@marvell.com> Acked-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6由 Linus Torvalds 提交于
* 'slab/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: slub: Fix a crash during slabinfo -v
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6由 Linus Torvalds 提交于
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: initramfs: Really fix build break on symbol-prefixed archs [media] Fix Kconfig errors due to two visible menus i2c/algos: convert Kconfig to use the menu's `visible' keyword media/video: convert Kconfig to use the menu's `visible' keyword Revert "i2c: Fix Kconfig dependencies" kconfig: regen parser kconfig: add an option to determine a menu's visibility
-
git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6由 Linus Torvalds 提交于
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6: parisc: Fix GSC PS/2 driver name for keyboard and mouse parisc: KittyHawk LCD fix parisc: convert the rest of the irq handlers to simple/percpu parisc: fix dino/gsc interrupts parisc: remove redundant initialization in sigsegv path of sys_rt_sigreturn
-
由 Eric W. Biederman 提交于
Because it caused a chroot ttyname regression in 2.6.36. As of 2.6.36 ttyname does not work in a chroot. It has already been reported that screen breaks, and for me this breaks an automated distribution testsuite, that I need to preserve the ability to run the existing binaries on for several more years. glibc 2.11.3 which has a fix for this is not an option. The root cause of this breakage is: commit 8df9d1a4 Author: Miklos Szeredi <mszeredi@suse.cz> Date: Tue Aug 10 11:41:41 2010 +0200 vfs: show unreachable paths in getcwd and proc Prepend "(unreachable)" to path strings if the path is not reachable from the current root. Two places updated are - the return string from getcwd() - and symlinks under /proc/$PID. Other uses of d_path() are left unchanged (we know that some old software crashes if /proc/mounts is changed). Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> So remove the nice sounding, but ultimately ill advised change to how /proc/fd symlinks work. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Chris Wilson 提交于
Linus Torvalds pointed out that our code was unbalanced when powering on the panel with respect to the power off sequence in that we were failing to restore the panel-fitter. The consequence of this would be that across a simple DPMS off/on for a non-native mode, without an intervening modeset, the panel fitter would remain disabled and the output would shift on the panel. Reported-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Chris Wilson 提交于
There's not much we can do here but hope for the best. However the first failure happens quite frequently and if often remedied by the second attempt to reset HEAD. So only print the error if that attempt also fails. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=19802Reported-by: NThomas Meyer <thomas@m3y3r.de> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
-
- 05 12月, 2010 6 次提交
-
-
由 Daniel Vetter 提交于
Otherwise we can't really fix the abi-braindeadness of forcing libva to manually wait for rendering when switching rings. Which in turn makes implementing hw semaphores a pointless exercise (at least for ironlake). [Also added the relaxed fencing param to explain the jump in numbering - relaxed fencing is in -next.] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Takashi Iwai 提交于
Add a missing NULL check and fix the wrong address passed to kunmap() in i830_cleanup(). Cc: stable@kernel.org Signed-off-by: NTakashi Iwai <tiwai@suse.de> [danvet: added cc stable] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Guy Martin 提交于
Fix kernel warnings caused by the driver name of GSC PS/2 containing '/'. The following warnings are observed on a K410 system : [ 10.700000] name 'GSC PS/2 keyboard' [ 10.732000] ------------[ cut here ]------------ [ 10.772000] WARNING: at fs/proc/generic.c:323 [ 10.828000] Modules linked in: [ 10.916000] [ 10.916000] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI [ 10.936000] PSW: 00000000000001000000000000001111 Not tainted [ 10.992000] r00-03 0004000f 104fe3e0 10201ea0 00000000 [ 11.060000] r04-07 4fc405c8 00000006 4fc405c8 4fc40694 [ 11.124000] r08-11 4fc40708 10438aa0 00000001 1043bfc8 [ 11.184000] r12-15 104ff2a0 104ff2a0 4fc38634 104ff2a0 [ 11.248000] r16-19 f0001570 10479af0 f000006c 1044fe50 [ 11.308000] r20-23 00000000 00000028 104cd858 00000000 [ 11.372000] r24-27 ffffffff 0000000e 1044fe10 1043bbe0 [ 11.436000] r28-31 0000002b 00000078 4fc40800 0000000d [ 11.496000] sr00-03 00000000 00000000 00000000 00000000 [ 11.560000] sr04-07 00000000 00000000 00000000 00000000 [ 11.624000] [ 11.688000] IASQ: 00000000 00000000 IAOQ: 10201ea0 10201ea4 [ 11.704000] IIR: 03ffe01f ISR: 00000000 IOR: 0000000d [ 11.772000] CPU: 0 CR30: 4fc40000 CR31: f01043b0 [ 11.836000] ORIG_R28: 4fc40940 [ 11.904000] IAOQ[0]: __xlate_proc_name+0x90/0xd0 [ 11.940000] IAOQ[1]: __xlate_proc_name+0x94/0xd0 [ 11.996000] RP(r2): __xlate_proc_name+0x90/0xd0 [ 12.052000] Backtrace: [ 12.108000] [<10257790>] vsnprintf+0x290/0x4f4 [ 12.136000] [ 12.188000] ---[ end trace 91bf6ece17e322dd ]--- [ 12.208000] serio: GSC PS/2 keyboard port at 0x0001c000 irq 19 @ 10:12:7 [ 12.264000] name 'GSC PS/2 mouse' [ 12.344000] ------------[ cut here ]------------ [ 12.384000] WARNING: at fs/proc/generic.c:323 [ 12.436000] Modules linked in: [ 12.524000] [ 12.528000] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI [ 12.544000] PSW: 00000000000001000000000000001111 Tainted: G W [ 12.600000] r00-03 0004000f 104fe3e0 10201ea0 00000000 [ 12.680000] r04-07 4fc405c8 00000006 4fc405c8 4fc40694 [ 12.740000] r08-11 4fc40708 10438aa0 00000001 1043bfc8 [ 12.804000] r12-15 104ff2a0 104ff2a0 4fc38634 104ff2a0 [ 12.868000] r16-19 f0001570 10479af0 f000006c 1044fe50 [ 12.928000] r20-23 00000000 00000025 104cd858 00000000 [ 12.992000] r24-27 ffffffff 0000000e 1044fe10 1043bbe0 [ 13.056000] r28-31 00000028 00000078 4fc40800 0000000d [ 13.116000] sr00-03 00000000 00000000 00000000 00000000 [ 13.180000] sr04-07 00000000 00000000 00000000 00000000 [ 13.244000] [ 13.308000] IASQ: 00000000 00000000 IAOQ: 10201ea0 10201ea4 [ 13.324000] IIR: 03ffe01f ISR: 00000000 IOR: 0000000d [ 13.392000] CPU: 0 CR30: 4fc40000 CR31: f01043b0 [ 13.456000] ORIG_R28: 4fc40940 [ 13.524000] IAOQ[0]: __xlate_proc_name+0x90/0xd0 [ 13.560000] IAOQ[1]: __xlate_proc_name+0x94/0xd0 [ 13.616000] RP(r2): __xlate_proc_name+0x90/0xd0 [ 13.672000] Backtrace: [ 13.728000] [<10257790>] vsnprintf+0x290/0x4f4 [ 13.756000] [ 13.808000] ---[ end trace 91bf6ece17e322de ]--- [ 13.828000] serio: GSC PS/2 mouse port at 0x00020100 irq 19 @ 10:12:8 Signed-off-by: NGuy Martin <gmsoft@tuxicoman.be> Acked-by: NHelge Deller <deller@gmx.de> Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>
-
由 Guy Martin 提交于
K class aka KittyHawk don't have LED support on their LCD. Installing HP-UX confirmed this. The current led_wq fills the LCD with black characters each time it runs. The patch prevents the led_wq workqueue and its proc entry to be created for KittyHawk machines. It also increase min_cmd_delay as currently, one character out of two is lost when a string is sent to the LCD. Signed-off-by: NGuy Martin <gmsoft@tuxicoman.be> Signed-off-by: NKyle McMartin <kyle@mcmartin.c>
-
由 James Bottomley 提交于
The generic conversion eliminates the spurious no_ack and no_end routines, converts all the cascaded handlers to handle_simple_irq() and makes iosapic use a modified handle_percpu_irq() to become the same as the CPU irq's. This isn't an essential change, but it eliminates the mask/unmask overhead of handle_level_irq(). Signed-off-by: NJames Bottomley <James.Bottomley@suse.de> Tested-by: NHelge Deller <deller@gmx.de> Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>
-
由 James Bottomley 提交于
The essential problem we're currently having is that dino (and gsc) is a cascaded CPU interrupt. Under the old __do_IRQ() handler, our CPU interrupts basically did an ack followed by an end. In the new scheme, we replaced them with level handlers which do a mask, an ack and then an unmask (but no end). Instead, with the renaming of end to eoi, we actually want to call the percpu flow handlers, because they actually have all the characteristics we want. This patch does the conversion and gets my C360 booting again. Signed-off-by: NJames Bottomley <James.Bottomley@suse.de> Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>
-
- 04 12月, 2010 6 次提交
-
-
由 Chris Wilson 提交于
Fixes the modesetting on the secondary panel of the Libretto W100 and presumably many more Ironlake laptops with SDVO LVDS displays. Reported-and-tested-by: NMatthew Willoughby <mattfredwill@gmail.com> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
-
由 Rabin Vincent 提交于
Include sched.h to ensure sched_clock() has the notrace annotation, and mark any functions it calls as notrace too. Include sched.h to ensure sched_clock() has the notrace annotation, and mark any functions it calls as notrace too. Acked-by: NDan Williams <dan.j.williams@intel.com> Signed-off-by: NRabin Vincent <rabin@rab.in> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Marcelo Roberto Jimenez 提交于
This patch fixes a compilation issue when compiling PCMCIA SA1100 support as a module with PCMCIA_DEBUG enabled. The symbol soc_pcmcia_debug was not beeing exported. ARM: pcmcia: Fix for building DEBUG with sa11xx_base.c as a module. This patch fixes a compilation issue when compiling PCMCIA SA1100 support as a module with PCMCIA_DEBUG enabled. The symbol soc_pcmcia_debug was not beeing exported. Cc: <stable@kernel.org> Signed-off-by: NMarcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dave Martin 提交于
The existing code invokes the syscall with rubbish in r7, due to what looks like an incorrect literal load idiom. Reviewed-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NDave Martin <dave.martin@linaro.org> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Tero Roponen 提交于
Commit f7cb1933 ("SLUB: Pass active and inactive redzone flags instead of boolean to debug functions") missed two instances of check_object(). This caused a lot of warnings during 'slabinfo -v' finally leading to a crash: BUG ext4_xattr: Freepointer corrupt ... BUG buffer_head: Freepointer corrupt ... BUG ext4_alloc_context: Freepointer corrupt ... ... BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffff810a291f>] file_sb_list_del+0x1c/0x35 PGD 79d78067 PUD 79e67067 PMD 0 Oops: 0002 [#1] SMP last sysfs file: /sys/kernel/slab/:t-0000192/validate This patch fixes the problem by converting the two missed instances. Acked-by: NChristoph Lameter <cl@linux.com> Signed-off-by: NTero Roponen <tero.roponen@gmail.com> Signed-off-by: NPekka Enberg <penberg@kernel.org>
-
由 Chris Wilson 提交于
Use the hardware DDA to calculate the ratio with as much accuracy as is possible. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
-