- 26 1月, 2013 1 次提交
-
-
由 Takashi Iwai 提交于
Because currently snd_printd() and snd_printdd() macros are expanded to empty when CONFIG_SND_DEBUG=n, a compile warning like below appears sometimes, and we had to covert it by ugly ifdefs: sound/pci/hda/patch_sigmatel.c: In function ‘stac92hd71bxx_fixup_hp’: sound/pci/hda/patch_sigmatel.c:2434:24: warning: unused variable ‘spec’ [-Wunused-variable] For "fixing" these issues better, this patch replaces snd_printd() and snd_printdd() definitions with empty inline functions instead of macros. This should have the same effect but shut up warnings like above. But since we had already put ifdefs, changing to inline functions would trigger compile errors. So, such ifdefs is removed in this patch. In addition, snd_pci_quirk name field is defined only when CONFIG_SND_DEBUG_VERBOSE is set, and the reference to it in snd_printdd() argument triggers the build errors, too. For avoiding these errors, introduce a new macro snd_pci_quirk_name() that is defined no matter how the debug option is set. Reported-by: NStratos Karafotis <stratosk@semaphore.gr> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 07 12月, 2012 1 次提交
-
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 15 8月, 2012 1 次提交
-
-
由 Takashi Iwai 提交于
Otherwise we may get compile warnings due to unused functions. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 03 7月, 2012 1 次提交
-
-
由 Takashi Iwai 提交于
Straightforward conversion to the new pm_ops from the legacy suspend/resume ops. Since we change vx222, vx_core and vxpocket have to be converted, too. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 24 4月, 2012 1 次提交
-
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 19 12月, 2011 1 次提交
-
-
由 Rusty Russell 提交于
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 01 11月, 2011 1 次提交
-
-
由 Paul Gortmaker 提交于
The implicit presence of module.h lured several users into incorrectly thinking that they only needed/used modparam.h but once we clean up the module.h presence, these will show up as build failures, so fix 'em now. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 10 6月, 2011 2 次提交
-
-
由 Takashi Iwai 提交于
The name argument of request_irq() appears in /proc/interrupts, and it's quite ugly when the name entry contains a space or special letters. In general, it's simpler and more readable when the module name appears there, so let's replace all entries with KBUILD_MODNAME. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The convention for pci_driver.name entry in kernel drivers seem to be the module name or equivalent ones. But, so far, almost all PCI sound drivers use more verbose name like "ABC Xyz (12)", and these are fairly confusing when appearing as a file name. This patch converts the all pci_driver.name entries in sound/pci/* to use KBUILD_MODNAME for more unified appearance. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 09 2月, 2010 1 次提交
-
-
由 Alexey Dobriyan 提交于
Use DEFINE_PCI_DEVICE_TABLE() to make PCI device ids go to .devinit.rodata section, so they can be discarded in some cases, and make them const. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 25 6月, 2009 1 次提交
-
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 1月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Convert from snd_card_new() to the new snd_card_create() function in sound/pci/*. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 8月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
Kill snd_assert() in sound/pci/*, either removed or replaced with if () with snd_BUG_ON(). Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 14 7月, 2008 1 次提交
-
-
由 Milton Miller 提交于
kcalloc is supposed to be called with the count as its first argument and the element size as the second. Both arguments are size_t so does not affect correctness. This callsite is during module_init and therefore not performance critical. Another patch will optimize the case when the count is variable but the size is fixed. Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 24 4月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
The irq handler of PCI drivers must be released before releasing other resources since the handler for a shared irq can be still called and may access the freed resource again. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 01 2月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
This header file exists only for some hacks to adapt alsa-driver tree. It's useless for building in the kernel. Let's move a few lines in it to sound/core.h and remove it. With this patch, sound/driver.h isn't removed but has just a single compile warning to include it. This should be really killed in future. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 16 10月, 2007 1 次提交
-
-
由 Clemens Ladisch 提交于
Set the SNDRV_PCM_INFO_SYNC_START flag and the substream's sync ID (only) if the substream actually can be linked to another one. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 20 7月, 2007 1 次提交
-
-
由 Paul Vojta 提交于
Adds mention of opl3sa2 driver to a diagnostic message for NeoMagic nm256 driver. Signed-off-by: NPaul Vojta <vojta@math.berkeley.edu> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 09 2月, 2007 1 次提交
-
-
由 Takashi Iwai 提交于
Clean up nm256-quirk lookup using snd_pci_quirk_lookup(). Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 20 12月, 2006 1 次提交
-
-
由 Takashi Iwai 提交于
Fix IRQ flags for PCI devices. The shared IRQs for PCI devices shouldn't be allocated with IRQF_DISABLED. Also, when MSI is enabled, IRQF_SHARED shouldn't be used. The patch removes unnecessary cast in request_irq and free_irq, too. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 22 10月, 2006 1 次提交
-
-
由 Takashi Iwai 提交于
- Check the return value of pci_enable_device() and request_irq() in the suspend. If any error occurs there, disable the device using snd_card_disconnect(). - Call pci_set_power_state() properly with pci_choose_state(). - Fix the order to call pci_set_power_state(). - Removed obsolete house-made PM codes in some drivers. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 05 10月, 2006 1 次提交
-
-
由 David Howells 提交于
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: NDavid Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
-
- 13 7月, 2006 1 次提交
-
-
由 Takashi Iwai 提交于
Fixed 'section mismatch' errors in ALSA PCI drivers: - removed invalid __devinitdata from pci id tables - fix/remove __devinit of functions called in suspend/resume Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 03 7月, 2006 1 次提交
-
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 28 4月, 2006 1 次提交
-
-
由 Henrik Kretzschmar 提交于
Signed-off-by: NHenrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 3月, 2006 2 次提交
-
-
由 Florian Schlichting 提交于
Modules: NM256 driver Treat the nm256 mixer as a write-only device so as to avoid hangs on initialisation. Signed-off-by: NFlorian Schlichting <Florian.Schlichting@gmx.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Ingo Molnar 提交于
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 03 1月, 2006 3 次提交
-
-
由 Takashi Iwai 提交于
Modules: NM256 driver Fix PM support on NM256 driver. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: NM256 driver Remove xxx_t typedefs from the PCI NM256 driver. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: NM256 driver Clean up snd-nm256 driver code: - Simplify chip constructor function Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 11 11月, 2005 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 04 11月, 2005 4 次提交
-
-
由 Takashi Iwai 提交于
Add missing KERN_* suffix to printk. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: Documentation,ALI5451 driver,NM256 driver Removed multi-card supports for ali5451 and nm256 drivers. They are supposed to be a single device. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 John W. Linville 提交于
Modules: NM256 driver The current snd-nm256 driver can cause Dell Latitude CSx laptops to lock-up during module (un)load. I have isolated this to the writes to the control port register at offset 0x6cc which were not already protected by the existing reset_workaround. I tried grouping these writes with the existing reset_workaround clause, but that caused the driver to have (un)load problems on the Dell Latitude LS laptops. So, I have implemented a reset_workaround_2 clause (please feel free to suggest a better name!) to cover this situation and added a quirk entry for the CSx laptops. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
- Remove vmalloc wrapper - Add release_and_free_resource() to remove kfree_nocheck() from each driver and simplify the code Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 9月, 2005 4 次提交
-
-
由 Clemens Ladisch 提交于
AD1889 driver,ALS4000 driver,ATIIXP driver,ATIIXP-modem driver AZT3328 driver,BT87x driver,CMIPCI driver,CS4281 driver ENS1370/1+ driver,ES1938 driver,ES1968 driver,FM801 driver Intel8x0 driver,Intel8x0-modem driver,Maestro3 driver,RME32 driver RME96 driver,SonicVibes driver,VIA82xx driver,VIA82xx-modem driver ALI5451 driver,au88x0 driver,CS46xx driver,EMU10K1/EMU10K2 driver HDA Intel driver,ICE1712 driver,ICE1724 driver,KORG1212 driver MIXART driver,NM256 driver,RME HDSP driver,RME9652 driver Trident driver,Digigram VX222 driver,YMFPCI driver Set the module owner field in each driver's struct pci_driver to get the driver symlink in the sysfs device directory. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Takashi Iwai 提交于
AD1889 driver,ATIIXP driver,ATIIXP-modem driver,AZT3328 driver BT87x driver,CMIPCI driver,CS4281 driver,ENS1370/1+ driver ES1938 driver,ES1968 driver,FM801 driver,Intel8x0 driver Intel8x0-modem driver,Maestro3 driver,SonicVibes driver,VIA82xx driver VIA82xx-modem driver,AC97 Codec,AK4531 codec,au88x0 driver CA0106 driver,CS46xx driver,EMU10K1/EMU10K2 driver,HDA Codec driver HDA generic driver,HDA Intel driver,ICE1712 driver,ICE1724 driver KORG1212 driver,MIXART driver,NM256 driver,Trident driver,YMFPCI driver Replace kcalloc(1,..) with kzalloc(). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
CS46xx driver,EMU10K1/EMU10K2 driver,PCM Midlevel,Trident driver YMFPCI driver,BT87x driver,CMIPCI driver,CS4281 driver ENS1370/1+ driver,ES1938 driver,ES1968 driver,Intel8x0 driver Intel8x0-modem driver,Maestro3 driver,RME32 driver,RME96 driver SonicVibes driver,VIA82xx driver,ALI5451 driver,ICE1712 driver ICE1724 driver,NM256 driver,RME HDSP driver,RME9652 driver Remove superfluous PCI ID definitions. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
ALSA Core,RawMidi Midlevel,ALSA<-OSS emulation,ALSA sequencer RME32 driver,RME96 driver,EMU10K1/EMU10K2 driver,NM256 driver Add sparse annotations where we do strange this with __iomem/__user pointers. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
- 30 8月, 2005 1 次提交
-
-
由 Takashi Iwai 提交于
NM256 driver - Fixed the PCM resume - restoring the rate setting - Fixed the handling of buggy irqs - Dynamically acquire/release irq handler to make the driver more robust to unknown irq storms (as OSS driver does). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-