1. 01 9月, 2011 1 次提交
    • C
      xfs: fix xfs_mark_inode_dirty during umount · 866e4ed7
      Christoph Hellwig 提交于
      During umount we do not add a dirty inode to the lru and wait for it to
      become clean first, but force writeback of data and metadata with
      I_WILL_FREE set.  Currently there is no way for XFS to detect that the
      inode has been redirtied for metadata operations, as we skip the
      mark_inode_dirty call during teardown.  Fix this by setting i_update_core
      nanually in that case, so that the inode gets flushed during inode reclaim.
      
      Alternatively we could enable calling mark_inode_dirty for inodes in
      I_WILL_FREE state, and let the VFS dirty tracking handle this.  I decided
      against this as we will get better I/O patterns from reclaim compared to
      the synchronous writeout in write_inode_now, and always marking the inode
      dirty in some way from xfs_mark_inode_dirty is a better safetly net in
      either case.
      Signed-off-by: NChristoph Hellwig <hch@lst.de>
      Reviewed-by: NDave Chinner <dchinner@redhat.com>
      Signed-off-by: NAlex Elder <aelder@sgi.com>
      (cherry picked from commit da6742a5a4cc844a9982fdd936ddb537c0747856)
      Signed-off-by: NAlex Elder <aelder@sgi.com>
      866e4ed7
  2. 25 8月, 2011 1 次提交
  3. 23 8月, 2011 1 次提交
  4. 13 8月, 2011 4 次提交
  5. 11 8月, 2011 1 次提交
  6. 10 8月, 2011 1 次提交
  7. 08 8月, 2011 8 次提交
  8. 07 8月, 2011 22 次提交
    • A
      Fix POSIX ACL permission check · 206b1d09
      Ari Savolainen 提交于
      After commit 3567866b: "RCUify freeing acls, let check_acl() go ahead in
      RCU mode if acl is cached" posix_acl_permission is being called with an
      unsupported flag and the permission check fails. This patch fixes the issue.
      Signed-off-by: NAri Savolainen <ari.m.savolainen@gmail.com>
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      206b1d09
    • L
      Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osd · c2f340a6
      Linus Torvalds 提交于
      * 'for-linus' of git://git.open-osd.org/linux-open-osd:
        ore: Make ore its own module
        exofs: Rename raid engine from exofs/ios.c => ore
        exofs: ios: Move to a per inode components & device-table
        exofs: Move exofs specific osd operations out of ios.c
        exofs: Add offset/length to exofs_get_io_state
        exofs: Fix truncate for the raid-groups case
        exofs: Small cleanup of exofs_fill_super
        exofs: BUG: Avoid sbi realloc
        exofs: Remove pnfs-osd private definitions
        nfs_xdr: Move nfs4_string definition out of #ifdef CONFIG_NFS_V4
      c2f340a6
    • L
      vfs: optimize inode cache access patterns · 3ddcd056
      Linus Torvalds 提交于
      The inode structure layout is largely random, and some of the vfs paths
      really do care.  The path lookup in particular is already quite D$
      intensive, and profiles show that accessing the 'inode->i_op->xyz'
      fields is quite costly.
      
      We already optimized the dcache to not unnecessarily load the d_op
      structure for members that are often NULL using the DCACHE_OP_xyz bits
      in dentry->d_flags, and this does something very similar for the inode
      ops that are used during pathname lookup.
      
      It also re-orders the fields so that the fields accessed by 'stat' are
      together at the beginning of the inode structure, and roughly in the
      order accessed.
      
      The effect of this seems to be in the 1-2% range for an empty kernel
      "make -j" run (which is fairly kernel-intensive, mostly in filename
      lookup), so it's visible.  The numbers are fairly noisy, though, and
      likely depend a lot on exact microarchitecture.  So there's more tuning
      to be done.
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      3ddcd056
    • L
      vfs: renumber DCACHE_xyz flags, remove some stale ones · 830c0f0e
      Linus Torvalds 提交于
      Gcc tends to generate better code with small integers, including the
      DCACHE_xyz flag tests - so move the common ones to be first in the list.
      Also just remove the unused DCACHE_INOTIFY_PARENT_WATCHED and
      DCACHE_AUTOFS_PENDING values, their users no longer exists in the source
      tree.
      
      And add a "unlikely()" to the DCACHE_OP_COMPARE test, since we want the
      common case to be a nice straight-line fall-through.
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      830c0f0e
    • L
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 7cd4767e
      Linus Torvalds 提交于
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
        net: Compute protocol sequence numbers and fragment IDs using MD5.
        crypto: Move md5_transform to lib/md5.c
      7cd4767e
    • B
      ore: Make ore its own module · cf283ade
      Boaz Harrosh 提交于
      Export everything from ore need exporting. Change Kbuild and Kconfig
      to build ore.ko as an independent module. Import ore from exofs
      Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
      cf283ade
    • B
      exofs: Rename raid engine from exofs/ios.c => ore · 8ff660ab
      Boaz Harrosh 提交于
      ORE stands for "Objects Raid Engine"
      
      This patch is a mechanical rename of everything that was in ios.c
      and its API declaration to an ore.c and an osd_ore.h header. The ore
      engine will later be used by the pnfs objects layout driver.
      
      * File ios.c => ore.c
      
      * Declaration of types and API are moved from exofs.h to a new
        osd_ore.h
      
      * All used types are prefixed by ore_ from their exofs_ name.
      
      * Shift includes from exofs.h to osd_ore.h so osd_ore.h is
        independent, include it from exofs.h.
      
      Other than a pure rename there are no other changes. Next patch
      will move the ore into it's own module and will export the API
      to be used by exofs and later the layout driver
      Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
      8ff660ab
    • B
      exofs: ios: Move to a per inode components & device-table · 9e9db456
      Boaz Harrosh 提交于
      Exofs raid engine was saving on memory space by having a single layout-info,
      single pid, and a single device-table, global to the filesystem. Then passing
      a credential and object_id info at the io_state level, private for each
      inode. It would also devise this contraption of rotating the device table
      view for each inode->ino to spread out the device usage.
      
      This is not compatible with the pnfs-objects standard, demanding that
      each inode can have it's own layout-info, device-table, and each object
      component it's own pid, oid and creds.
      
      So: Bring exofs raid engine to be usable for generic pnfs-objects use by:
      
      * Define an exofs_comp structure that holds obj_id and credential info.
      
      * Break up exofs_layout struct to an exofs_components structure that holds a
        possible array of exofs_comp and the array of devices + the size of the
        arrays.
      
      * Add a "comps" parameter to get_io_state() that specifies the ids creds
        and device array to use for each IO.
      
        This enables to keep the layout global, but the device-table view, creds
        and IDs at the inode level. It only adds two 64bit to each inode, since
        some of these members already existed in another form.
      
      * ios raid engine now access layout-info and comps-info through the passed
        pointers. Everything is pre-prepared by caller for generic access of
        these structures and arrays.
      
      At the exofs Level:
      
      * Super block holds an exofs_components struct that holds the device
        array, previously in layout. The devices there are in device-table
        order. The device-array is twice bigger and repeats the device-table
        twice so now each inode's device array can point to a random device
        and have a round-robin view of the table, making it compatible to
        previous exofs versions.
      
      * Each inode has an exofs_components struct that is initialized at
        load time, with it's own view of the device table IDs and creds.
        When doing IO this gets passed to the io_state together with the
        layout.
      
      While preforming this change. Bugs where found where credentials with the
      wrong IDs where used to access the different SB objects (super.c). As well
      as some dead code. It was never noticed because the target we use does not
      check the credentials.
      Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
      9e9db456
    • B
      exofs: Move exofs specific osd operations out of ios.c · 85e44df4
      Boaz Harrosh 提交于
      ios.c will be moving to an external library, for use by the
      objects-layout-driver. Remove from it some exofs specific functions.
      
      Also g_attr_logical_length is used both by inode.c and ios.c
      move definition to the later, to keep it independent
      Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
      85e44df4
    • B
      exofs: Add offset/length to exofs_get_io_state · e1042ba0
      Boaz Harrosh 提交于
      In future raid code we will need to know the IO offset/length
      and if it's a read or write to determine some of the array
      sizes we'll need.
      
      So add a new exofs_get_rw_state() API for use when
      writeing/reading. All other simple cases are left using the
      old way.
      
      The major change to this is that now we need to call
      exofs_get_io_state later at inode.c::read_exec and
      inode.c::write_exec when we actually know these things. So this
      patch is kept separate so I can test things apart from other
      changes.
      Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
      e1042ba0
    • D
      net: Compute protocol sequence numbers and fragment IDs using MD5. · 6e5714ea
      David S. Miller 提交于
      Computers have become a lot faster since we compromised on the
      partial MD4 hash which we use currently for performance reasons.
      
      MD5 is a much safer choice, and is inline with both RFC1948 and
      other ISS generators (OpenBSD, Solaris, etc.)
      
      Furthermore, only having 24-bits of the sequence number be truly
      unpredictable is a very serious limitation.  So the periodic
      regeneration and 8-bit counter have been removed.  We compute and
      use a full 32-bit sequence number.
      
      For ipv6, DCCP was found to use a 32-bit truncated initial sequence
      number (it needs 43-bits) and that is fixed here as well.
      Reported-by: NDan Kaminsky <dan@doxpara.com>
      Tested-by: NWilly Tarreau <w@1wt.eu>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      6e5714ea
    • D
      crypto: Move md5_transform to lib/md5.c · bc0b96b5
      David S. Miller 提交于
      We are going to use this for TCP/IP sequence number and fragment ID
      generation.
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      bc0b96b5
    • L
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6 · 1957e7fd
      Linus Torvalds 提交于
      * git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
        cifs: cope with negative dentries in cifs_get_root
        cifs: convert prefixpath delimiters in cifs_build_path_to_root
        CIFS: Fix missing a decrement of inFlight value
        cifs: demote DFS referral lookup errors to cFYI
        Revert "cifs: advertise the right receive buffer size to the server"
      1957e7fd
    • L
      Merge branch 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 · ce195d32
      Linus Torvalds 提交于
      * 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
        PM / Runtime: Allow _put_sync() from interrupts-disabled context
        PM / Domains: Fix pm_genpd_poweron()
      ce195d32
    • L
      Merge branch 'for_linus' of... · 2560540b
      Linus Torvalds 提交于
      Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86
      
      * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (38 commits)
        acer-wmi: support Lenovo ideapad S205 wifi switch
        acerhdf.c: spaces in aliased changed to *
        platform-drivers-x86: ideapad-laptop: add missing ideapad_input_exit in ideapad_acpi_add error path
        x86 driver: fix typo in TDP override enabling
        Platform: fix samsung-laptop DMI identification for N150/N210/220/N230
        dell-wmi: Add keys for Dell XPS L502X
        platform-drivers-x86: samsung-q10: make dmi_check_callback return 1
        Platform: Samsung Q10 backlight driver
        platform-drivers-x86: intel_scu_ipc: convert to DEFINE_PCI_DEVICE_TABLE
        platform-drivers-x86: intel_rar_register: convert to DEFINE_PCI_DEVICE_TABLE
        platform-drivers-x86: intel_menlow: add missing return AE_OK for intel_menlow_register_sensor()
        platform-drivers-x86: intel_mid_thermal: fix memory leak
        platform-drivers-x86: msi-wmi: add missing sparse_keymap_free in msi_wmi_init error path
        Samsung Laptop platform driver: support N510
        asus-wmi: add uwb rfkill support
        asus-wmi: add gps rfkill support
        asus-wmi: add CWAP support and clarify the meaning of WAPF bits
        asus-wmi: return proper value in store_cpufv()
        asus-wmi: check for temp1 presence
        asus-wmi: add thermal sensor
        ...
      2560540b
    • L
      Merge branch 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen · 45a05f94
      Linus Torvalds 提交于
      * 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
        xen/trace: Fix compile error when CONFIG_XEN_PRIVILEGED_GUEST is not set
        xen: Fix misleading WARN message at xen_release_chunk
        xen: Fix printk() format in xen/setup.c
        xen/tracing: it looks like we wanted CONFIG_FTRACE
        xen/self-balloon: Add dependency on tmem.
        xen/balloon: Fix compile errors - missing header files.
        xen/grant: Fix compile warning.
        xen/pciback: remove duplicated #include
      45a05f94
    • L
      Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 · f38092b5
      Linus Torvalds 提交于
      * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
        Battery: sysfs_remove_battery(): possible circular locking
      f38092b5
    • J
      savagedb: Fix typo causing regression in savage4 series video chip detection · 4b00e4b3
      John Stanley 提交于
      Two additional savage4 variants were added, but the S3_SAVAGE4_SERIES
      macro was incompletely modified, resulting in a false positive detection
      of a savage4 card regardless of which savage card is actually present.
      
      For non-savage4 series cards, such as a Savage/IX-MV card, this results
      in garbled video and/or a hard-hang at boot time.  Fix this by changing
      an '||' to an '&&' in the S3_SAVAGE4_SERIES macro.
      Signed-off-by: NJohn P. Stanley <jpsinthemix@verizon.net>
      Reviewed-by: NTormod Volden <debian.tormod@gmail.com>
      [ The macros have incomplete parenthesis too, but whatever ..  -Linus ]
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      4b00e4b3
    • J
      CodingStyle: Document the exception of not splitting user-visible strings, for grepping · 6f76b6fc
      Josh Triplett 提交于
      Patch reviewers now recommend not splitting long user-visible strings,
      such as printk messages, even if they exceed 80 columns.  This avoids
      breaking grep.  However, that recommendation did not actually appear
      anywhere in Documentation/CodingStyle.
      
      See, for example, the thread at
        http://news.gmane.org/find-root.php?message_id=%3c1312215262.11635.15.camel%40Joe%2dLaptop%3eSigned-off-by: NJosh Triplett <josh@joshtriplett.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      6f76b6fc
    • L
      vfs: show O_CLOEXE bit properly in /proc/<pid>/fdinfo/<fd> files · 1117f72e
      Linus Torvalds 提交于
      The CLOEXE bit is magical, and for performance (and semantic) reasons we
      don't actually maintain it in the file descriptor itself, but in a
      separate bit array.  Which means that when we show f_flags, the CLOEXE
      status is shown incorrectly: we show the status not as it is now, but as
      it was when the file was opened.
      
      Fix that by looking up the bit properly in the 'fdt->close_on_exec' bit
      array.
      
      Uli needs this in order to re-implement the pfiles program:
      
        "For normal file descriptors (not sockets) this was the last piece of
         information which wasn't available.  This is all part of my 'give
         Solaris users no reason to not switch' effort.  I intend to offer the
         code to the util-linux-ng maintainers."
      Requested-by: NUlrich Drepper <drepper@akkadia.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      1117f72e
    • L
      oom_ajd: don't use WARN_ONCE, just use printk_once · c2142704
      Linus Torvalds 提交于
      WARN_ONCE() is very annoying, in that it shows the stack trace that we
      don't care about at all, and also triggers various user-level "kernel
      oopsed" logic that we really don't care about.  And it's not like the
      user can do anything about the applications (sshd) in question, it's a
      distro issue.
      
      Requested-by: Andi Kleen <andi@firstfloor.org> (and many others)
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      c2142704
    • M
      lib/sha1: use the git implementation of SHA-1 · 1eb19a12
      Mandeep Singh Baines 提交于
      For ChromiumOS, we use SHA-1 to verify the integrity of the root
      filesystem.  The speed of the kernel sha-1 implementation has a major
      impact on our boot performance.
      
      To improve boot performance, we investigated using the heavily optimized
      sha-1 implementation used in git.  With the git sha-1 implementation, we
      see a 11.7% improvement in boot time.
      
      10 reboots, remove slowest/fastest.
      
      Before:
      
        Mean: 6.58 seconds Stdev: 0.14
      
      After (with git sha-1, this patch):
      
        Mean: 5.89 seconds Stdev: 0.07
      
      The other cool thing about the git SHA-1 implementation is that it only
      needs 64 bytes of stack for the workspace while the original kernel
      implementation needed 320 bytes.
      Signed-off-by: NMandeep Singh Baines <msb@chromium.org>
      Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
      Cc: Nicolas Pitre <nico@cam.org>
      Cc: Herbert Xu <herbert@gondor.apana.org.au>
      Cc: David S. Miller <davem@davemloft.net>
      Cc: linux-crypto@vger.kernel.org
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      1eb19a12
  9. 06 8月, 2011 1 次提交