Add missing include of linux/module.h for drivers that use interfaces from
linux/module.h.  This patch fixes build errors.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Cc: Jonathan McDowell <noodles@earth.li>
Acked-by: NKristoffer Ericson <kristoffer.ericson@gmail.com>
Cc: Magnus Damm <damm@opensource.se>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ep93xx_bl.c uses interfaces from linux/module.h, so it should include
that file.  This patch fixes build errors:

    CC [M]  drivers/video/backlight/ep93xx_bl.o
  drivers/video/backlight/ep93xx_bl.c:138: error: 'THIS_MODULE' undeclared here (not in a function)
  drivers/video/backlight/ep93xx_bl.c:158: error: expected declaration specifiers or '...' before string constant
  drivers/video/backlight/ep93xx_bl.c:158: warning: data definition has no type or storage class
  ...
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Replace/remove use of RIO v.1.2 registers/bits that are not
forward-compatible with newer versions of RapidIO specification.

RapidIO specification v.1.3 removed Write Port CSR, Doorbell CSR,
Mailbox CSR and Mailbox and Doorbell bits of the PEF CAR.

Use of removed (since RIO v.1.3) register bits affects users of
currently available 1.3 and 2.x compliant devices who may use not so
recent kernel versions.

Removing checks for unsupported bits makes corresponding routines
compatible with all versions of RapidIO specification.  Therefore,
backporting makes stable kernel versions compliant with RIO v.1.3 and
later as well.
Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Chul Kim <chul.kim@idt.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ZONE_CONGESTED is only cleared in kswapd, but pages can be freed in any
task.  It's possible ZONE_CONGESTED isn't cleared in some cases:

 1. the zone is already balanced just entering balance_pgdat() for
    order-0 because concurrent tasks free memory.  In this case, later
    check will skip the zone as it's balanced so the flag isn't cleared.

 2. high order balance fallbacks to order-0.  quote from Mel: At the
    end of balance_pgdat(), kswapd uses the following logic;

	If reclaiming at high order {
		for each zone {
			if all_unreclaimable
				skip
			if watermark is not met
				order = 0
				loop again

			/* watermark is met */
			clear congested
		}
	}

    i.e. it clears ZONE_CONGESTED if it the zone is balanced.  if not,
    it restarts balancing at order-0.  However, if the higher zones are
    balanced for order-0, kswapd will miss clearing ZONE_CONGESTED as
    that only happens after a zone is shrunk.  This can mean that
    wait_iff_congested() stalls unnecessarily.

This patch makes kswapd clear ZONE_CONGESTED during its initial
highmem->dma scan for zones that are already balanced.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Acked-by: NMel Gorman <mgorman@suse.de>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It seems that 7bf69395 ("console: allow to retain boot console via
boot option keep_bootcon") doesn't always achieve what it aims, as when
printk_late_init() runs it unconditionally turns off all boot consoles.
With this patch, I am able to see more messages on the boot console in
KVM guests than I can without, when keep_bootcon is specified.

I think it is appropriate for the relevant -stable trees.  However, it's
more of an annoyance than a serious bug (ideally you don't need to keep
the boot console around as console handover should be working -- I was
encountering a situation where the console handover wasn't working and
not having the boot console available meant I couldn't see why).
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Greg KH <gregkh@suse.de>
Acked-by: NFabio M. Di Nitto <fdinitto@redhat.com>
Cc: <stable@kernel.org>		[2.6.39.x, 3.0.x]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Paul said: I left Google at the end of last week - if it's not bouncing
already, menage@google.com isn't going to work for much longer.
Signed-off-by: NWanlong Gao <gaowanlong@cn.fujitsu.com>
Acked-by: NPaul Menage <paul@paulmenage.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I get the below warning:

  BUG: using smp_processor_id() in preemptible [00000000] code: bash/746
  caller is native_sched_clock+0x37/0x6e
  Pid: 746, comm: bash Tainted: G        W   3.0.0+ #254
  Call Trace:
   [<ffffffff813435c6>] debug_smp_processor_id+0xc2/0xdc
   [<ffffffff8104158d>] native_sched_clock+0x37/0x6e
   [<ffffffff81116219>] try_to_free_mem_cgroup_pages+0x7d/0x270
   [<ffffffff8114f1f8>] mem_cgroup_force_empty+0x24b/0x27a
   [<ffffffff8114ff21>] ? sys_close+0x38/0x138
   [<ffffffff8114ff21>] ? sys_close+0x38/0x138
   [<ffffffff8114f257>] mem_cgroup_force_empty_write+0x17/0x19
   [<ffffffff810c72fb>] cgroup_file_write+0xa8/0xba
   [<ffffffff811522d2>] vfs_write+0xb3/0x138
   [<ffffffff8115241a>] sys_write+0x4a/0x71
   [<ffffffff8114ffd9>] ? sys_close+0xf0/0x138
   [<ffffffff8176deab>] system_call_fastpath+0x16/0x1b

sched_clock() can't be used with preempt enabled.  And we don't need
fast approach to get clock here, so let's use ktime API.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Tested-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The various basic memory allocation function return NULL, not an
ERR_PTR.

The semantic patch that makes this change is available in
scripts/coccinelle/null/eno.cocci.

More information about semantic patching is available at
http://coccinelle.lip6.fr/Signed-off-by: NThomas Meyer <thomas@m3y3r.de>
Cc: Niranjana Vishwanathapura <nvishwan@codeaurora.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The test for bad usage of min_t() and max_t() is missing the --ignore
type.  Add it.
Signed-off-by: NHui Zhu <teawater@gmail.com>
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change to new git tree -
(git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git).
Signed-off-by: NRalf Thielow <ralf.thielow@googlemail.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit d1a05b69 ("memcg do not try to drain per-cpu caches without
pages") added a drain_local_stock() call to a preemptible section.

The draining task looks up the cpu-local stock twice to set the
draining-flag, then to drain the stock and clear the flag again.  If the
task is migrated to a different CPU in between, noone will clear the
flag on the first stock and it will be forever undrainable.  Its charge
can not be recovered and the cgroup can not be deleted anymore.

Properly pin the task to the executing CPU while draining stocks.
Signed-off-by: NJohannes Weiner <jweiner@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com
Acked-by: NMichal Hocko <mhocko@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NEvgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The for loop was looking for i <= 0 instead of i >= 0 so this function
never did anything.  Also we started with i = NB_SYSFS_BIN_FILES instead
of "NB_SYSFS_BIN_FILES - 1" which is an off by one bug.
Reported-by: NBojan Prtvar <prtvar.b@gmail.com>
Signed-off-by: NDan Carpenter <error27@gmail.com>
Acked-by: NJean-Franois Dagenais <dagenaisj@sonatest.com>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The bug was accidentally found by the following program:

    #include <asm/sysinfo.h>
    #include <asm/unistd.h>
    #include <sys/syscall.h>
    static int setsysinfo(unsigned long op, void *buffer, unsigned long size,
                          int *start, void *arg, unsigned long flag) {
        return syscall(__NR_osf_setsysinfo, op, buffer, size, start, arg, flag);
    }

    int main(int argc, char **argv) {
        short x[10];
        unsigned int buf[2] = { SSIN_UACPROC, UAC_SIGBUS, };
        setsysinfo(SSI_NVPAIRS, buf, 1, 0, 0, 0);

        int  *y = (int*) (x+1);
        *y = 0;
        return 0;
    }

The program shoud fail on SIGBUS, but didn't.

The patch is a second part of userspace flag fix (commit 745dd240
"Alpha: Rearrange thread info flags fixing two regressions").

Deleted outdated out-of-sync 'UAC_SHIFT' (the cause of bug) in favour of
'ALPHA_UAC_SHIFT'.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NSergei Trofimovich <slyfox@gentoo.org>
Acked-by: NMichael Cree <mcree@orcon.net.nz>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Found on allmodconfig build (ARCH=alpha)

    drivers/misc/pti.c: In function 'get_id':
    drivers/misc/pti.c:249: error: implicit declaration of function 'kmalloc'
    drivers/misc/pti.c: In function 'pti_char_write':
    drivers/misc/pti.c:658: error: implicit declaration of function 'copy_from_user'
Signed-off-by: NSergei Trofimovich <slyfox@gentoo.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: J Freyensee <james_p_freyensee@linux.intel.com>
Cc: Jeremy Rocher <rocher.jeremy@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

entry_32.S contained a hardcoded alternative instruction entry, and the
format changed in commit 59e97e4d ("x86: Make alternative
instruction pointers relative").

Replace the hardcoded entry with the altinstruction_entry macro.  This
fixes the 32-bit boot with CONFIG_X86_INVD_BUG=y.
Reported-and-tested-by: NArnaud Lacombe <lacombar@gmail.com>
Signed-off-by: NAndy Lutomirski <luto@mit.edu>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While removing custom rendezvous code and switching to stop_machine,
commit 192d8857 ("x86, mtrr: use stop_machine APIs for doing MTRR
rendezvous") completely dropped mtrr setting code on !CONFIG_SMP
breaking MTRR settting on UP.

Fix it by removing the incorrect CONFIG_SMP.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NAnders Eriksson <aeriksson@fastmail.fm>
Tested-and-acked-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Purely in-memory filesystems do not use the inode hash as the dcache
tells us if an entry already exists.  As a result, they do not call
unlock_new_inode, and thus directory inodes do not get put into a
different lockdep class for i_sem.

We need the different lockdep classes, because the locking order for
i_mutex is different for directory inodes and regular inodes.  Directory
inodes can do "readdir()", which takes i_mutex *before* possibly taking
mm->mmap_sem (due to a page fault while copying the directory entry to
user space).

In contrast, regular inodes can be mmap'ed, which takes mm->mmap_sem
before accessing i_mutex.

The two cases can never happen for the same inode, so no real deadlock
can occur, but without the different lockdep classes, lockdep cannot
understand that.  As a result, if CONFIG_DEBUG_LOCK_ALLOC is set, this
can lead to false positives from lockdep like below:

    find/645 is trying to acquire lock:
     (&mm->mmap_sem){++++++}, at: [<ffffffff81109514>] might_fault+0x5c/0xac

    but task is already holding lock:
     (&sb->s_type->i_mutex_key#15){+.+.+.}, at: [<ffffffff81149f34>]
    vfs_readdir+0x5b/0xb4

    which lock already depends on the new lock.

    the existing dependency chain (in reverse order) is:

    -> #1 (&sb->s_type->i_mutex_key#15){+.+.+.}:
          [<ffffffff8108ac26>] lock_acquire+0xbf/0x103
          [<ffffffff814db822>] __mutex_lock_common+0x4c/0x361
          [<ffffffff814dbc46>] mutex_lock_nested+0x40/0x45
          [<ffffffff811daa87>] hugetlbfs_file_mmap+0x82/0x110
          [<ffffffff81111557>] mmap_region+0x258/0x432
          [<ffffffff811119dd>] do_mmap_pgoff+0x2ac/0x306
          [<ffffffff81111b4f>] sys_mmap_pgoff+0x118/0x16a
          [<ffffffff8100c858>] sys_mmap+0x22/0x24
          [<ffffffff814e3ec2>] system_call_fastpath+0x16/0x1b

    -> #0 (&mm->mmap_sem){++++++}:
          [<ffffffff8108a4bc>] __lock_acquire+0xa1a/0xcf7
          [<ffffffff8108ac26>] lock_acquire+0xbf/0x103
          [<ffffffff81109541>] might_fault+0x89/0xac
          [<ffffffff81149cff>] filldir+0x6f/0xc7
          [<ffffffff811586ea>] dcache_readdir+0x67/0x205
          [<ffffffff81149f54>] vfs_readdir+0x7b/0xb4
          [<ffffffff8114a073>] sys_getdents+0x7e/0xd1
          [<ffffffff814e3ec2>] system_call_fastpath+0x16/0x1b

This patch moves the directory vs file lockdep annotation into a helper
function that can be called by in-memory filesystems and has hugetlbfs
call it.
Signed-off-by: NJosh Boyer <jwboyer@redhat.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/writeback:
  squeeze max-pause area and drop pass-good area

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/cpupowerutils:
  cpupower: use man(1) when calling "cpupower help subcommand"
  cpupower: make NLS truly optional
  cpupower: fix Makefile typo
  cpupower: Make monitor command -c/--cpu aware
  cpupower: Better detect offlined CPUs
  cpupower: Do not show an empty Idle_Stats monitor if no idle driver is available
  cpupower: mperf monitor - Use TSC to calculate max frequency if possible
  cpupower: avoid using symlinks

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
  hwmon: (i5k_amb) Drop i5k_channel_pci_id
  hwmon: (ntc_thermistor) Simplify if sequence

* '3.1-rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (21 commits)
  target: Convert acl_node_lock to be IRQ-disabling
  target: Make locking in transport_deregister_session() IRQ safe
  tcm_fc: init/exit functions should not be protected by "#ifdef MODULE"
  target: Print subpage too for unhandled MODE SENSE pages
  iscsi-target: Fix iscsit_allocate_se_cmd_for_tmr failure path bugs
  iscsi-target: Implement iSCSI target IPv6 address printing.
  target: Fix task SGL chaining breakage with transport_allocate_data_tasks
  target: Fix task count > 1 handling breakage and use max_sector page alignment
  target: Add missing DATA_SG_IO transport_cmd_get_valid_sectors check
  target: Fix SYNCHRONIZE_CACHE zero LBA + range breakage
  target: Remove duplicate task completions in transport_emulate_control_cdb
  target: Fix WRITE_SAME usage with transport_get_size
  target: Add WRITE_SAME (10) parsing and refactor passthrough checks
  target: Fix write payload exception handling with ->new_cmd_map
  iscsi-target: forever loop bug in iscsit_attach_ooo_cmdsn()
  iscsi-target: remove duplicate return
  target: Convert target_core_rd.c to use use BUG_ON
  iscsi-target: Fix leak on failure in iscsi_copy_param_list()
  target: Use ERR_CAST inlined function
  target: Make standard INQUIRY return 'not connected' for tpg_virt_lun0
  ...

I ran into a couple of programs which broke with the new Linux 3.0
version.  Some of those were binary only.  I tried to use LD_PRELOAD to
work around it, but it was quite difficult and in one case impossible
because of a mix of 32bit and 64bit executables.

For example, all kind of management software from HP doesnt work, unless
we pretend to run a 2.6 kernel.

  $ uname -a
  Linux svivoipvnx001 3.0.0-08107-g97cd98f #1062 SMP Fri Aug 12 18:11:45 CEST 2011 i686 i686 i386 GNU/Linux

  $ hpacucli ctrl all show

  Error: No controllers detected.

  $ rpm -qf /usr/sbin/hpacucli
  hpacucli-8.75-12.0

Another notable case is that Python now reports "linux3" from
sys.platform(); which in turn can break things that were checking
sys.platform() == "linux2":

  https://bugzilla.mozilla.org/show_bug.cgi?id=664564

It seems pretty clear to me though it's a bug in the apps that are using
'==' instead of .startswith(), but this allows us to unbreak broken
programs.

This patch adds a UNAME26 personality that makes the kernel report a
2.6.40+x version number instead.  The x is the x in 3.x.

I know this is somewhat ugly, but I didn't find a better workaround, and
compatibility to existing programs is important.

Some programs also read /proc/sys/kernel/osrelease.  This can be worked
around in user space with mount --bind (and a mount namespace)

To use:

  wget ftp://ftp.kernel.org/pub/linux/kernel/people/ak/uname26/uname26.c
  gcc -o uname26 uname26.c
  ./uname26 program
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In commit a144c6a6 ("PM: Print a warning if firmware is requested
when tasks are frozen") we not only printed a warning if somebody tried
to load the firmware when tasks are frozen - we also failed the load.

But that check was done before the check for built-in firmware, and then
when we disallowed usermode helpers during bootup (commit 288d5abe:
"Boot up with usermodehelper disabled"), that actually means that
built-in modules can no longer load their firmware even if the firmware
is built in too.  Which used to work, and some people depended on it for
the R100 driver.

So move the test for usermodehelper_is_disabled() down, to after
checking the built-in firmware.

This should fix:

	https://bugzilla.kernel.org/show_bug.cgi?id=40952Reported-by: NJames Cloos <cloos@hjcloos.com>
Bisected-by: NElimar Riesebieter <riesebie@lxtec.de>
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Rafael Wysocki <rjw@sisk.pl>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-31-rc3/i2c-fixes' of git://git.fluff.org/bjdooks/linux:
  i2c-nomadik: fix kerneldoc warning
  Revert "i2c-omap: fix static suspend vs. runtime suspend"
  i2c-nomadik: Do not use _interruptible_ variant call

There was a missing struct item in the kerneldoc, add it and fix
another pretty-printing formatting issue with a missing space.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: wiimote: Add status and return request handlers
  HID: wiimote: Add drm request
  HID: wiimote: Register led class devices
  HID: wiimote: Correctly call HID open/close callbacks
  HID: wiimote: Simplify synchronization
  HID: usbhid: Add support for SiGma Micro chip
  HID: add support for new revision of Apple aluminum keyboard

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ad714x - read the interrupt status registers in a row
  Input: ad714x - use DMA-safe buffers for spi_write()
  Input: ad714x - fix endianness issues
  Input: ad714xx-spi - force SPI bus into the default 8-bit mode
  Input: ep93xx_keypad - add missing include of linux/module.h
  Input: tnetv107x-ts - add missing include of linux/module.h
  Input: max11801_ts - correct license statement
  Input: atmel_mxt_ts - report pressure information from the driver
  Input: bcm5974 - Add support for newer MacBookPro8,2
  Input: wacom - report id 3 returns 4 bytes of data
  Input: wacom - add WAC_MSG_RETRIES define
  Input: wacom - add support for the Wacom Bamboo Pen (CTL-660/K)
  Input: tegra-kbc - correct call to input_free_device
  Input: mpu3050 - correct call to input_free_device
  Input: bcm5974 - add support for touchpads found in MacBookAir4,2
  Input: mma8450 - fix module device table type
  Input: remove CLOCK_TICK_RATE from analog joystick driver

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: check size of FUSE_NOTIFY_INVAL_ENTRY message
  fuse: mark pages accessed when written to
  fuse: delete dead .write_begin and .write_end aops
  fuse: fix flock
  fuse: fix non-ANSI void function notation

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: Allow handling signals when stack is corrupted.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (29 commits)
  bridge: fix a possible net_device leak
  net: Documentation: RFC 2553bis is now RFC 3493
  atm: br2684: Fix oops due to skb->dev being NULL
  ipv6: Fix ipv6_getsockopt for IPV6_2292PKTOPTIONS
  net: netdev-features.txt update to Documentation/networking/00-INDEX
  vlan: reset headers on accel emulation path
  forcedeth: call vlan_mode only if hw supports vlans
  via-velocity: remove non-tagged packet filtering
  bonding:reset backup and inactive flag of slave
  net_sched: fix port mirror/redirect stats reporting
  sit tunnels: propagate IPv6 transport class to IPv4 Type of Service
  gianfar: reduce stack usage in gianfar_ethtool.c
  net: minor update to Documentation/networking/scaling.txt
  net: add missing entries to Documentation/networking/00-INDEX
  gianfar: prevent buggy hw rx vlan tagging
  net: sh_eth: Fix build by forgot including linux/interrupt.h
  drivers/net/can/sja1000/plx_pci.c: eliminate double free
  usbnet/cdc_ncm: Don't use stack variables for DMA
  vmxnet3: Don't enable vlan filters in promiscuous mode.
  iwlagn: sysfs couldn't find the priv pointer
  ...

FUSE_NOTIFY_INVAL_ENTRY didn't check the length of the write so the
message processing could overrun and result in a "kernel BUG at
fs/fuse/dev.c:629!"
Reported-by: NHan-Wen Nienhuys <hanwenn@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
CC: stable@kernel.org

Function i5k_channel_pci_id looks like it can fail, while a better
code design would make it more obvious that it can't. We can even get
rid of the function.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NDarrick J. Wong <djwong@us.ibm.com>
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>

Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86-32, vdso: On system call restart after SYSENTER, use int $0x80
  x86, UV: Remove UV delay in starting slave cpus
  x86, olpc: Wait for last byte of EC command to be accepted

When we enter a 32-bit system call via SYSENTER or SYSCALL, we shuffle
the arguments to match the int $0x80 calling convention.  This was
probably a design mistake, but it's what it is now.  This causes
errors if the system call as to be restarted.

For SYSENTER, we have to invoke the instruction from the vdso as the
return address is hardcoded.  Accordingly, we can simply replace the
jump in the vdso with an int $0x80 instruction and use the slower
entry point for a post-restart.
Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/CA%2B55aFztZ=r5wa0x26KJQxvZOaQq8s2v3u50wCyJcA-Sc4g8gQ@mail.gmail.com
Cc: <stable@kernel.org>

Fixes fallout due to the removal of the cast in commit aa462abe
("mm: fix __page_to_pfn for a const struct page argument")
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit adf6e079.

Remove system PM methods which can race with runtime PM methods.

Also, as of v3.1, the PM domain level code for OMAP handles device
power state transistions automatically for devices, so drivers no
longer need to specifically call the bus/pm_domain methods themselves.
Signed-off-by: NKevin Hilman <khilman@ti.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

If there is a signal pending and wait_for_completion_interruptible_timeout
exited because of the -ERESTARTSYS error we are unable to send any more
i2c messages.

So, deprecate this _interruptible_ variant call.
Signed-off-by: NSrinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: fix tracing builds inside the source tree
  xfs: remove subdirectories
  xfs: don't expect xfs headers to be in subdirectories