Took some cycles to re-read the Lguest Journey end-to-end, fix some
rot and tighten some phrases.

Only comments change.  No new jokes, but a couple of recycled old jokes.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

drivers/lguest/x86/core.c: In function ‘copy_in_guest_info’:
drivers/lguest/x86/core.c:97: error: ‘struct x86_hw_tss’ has no member named ‘esp1’
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This changes size-specific register names (eip/rip, esp/rsp, etc.) to
generic names in the thread and tss structures.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

We can save some lines of code by getting rid of
*lg = cpu... lines of code spread everywhere by now.
Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

events represented in the 'changed' bitmap are per-cpu, not per-guest.
move it to the lg_cpu structure
Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

in our new model, pages are assigned to a virtual cpu, not to a guest.
We move it to the lg_cpu structure.
Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

in our model, a guest does not run in a cpu anymore: a virtual cpu
does. So we change last_guest to last_cpu
Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

this patch makes the pgdir management per-vcpu. The pgdirs pool
is still guest-wide (although it'll probably need to grow when we
are really executing more vcpus), but the pgdidx index is gone,
since it makes no sense anymore. Instead, we use a per-vcpu
index.
Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

lguest struct have room for some fields, namely, cr2, ts, esp1
and ss1, that are not really guest-wide, but rather, vcpu-wide.

This patch puts it in the vcpu struct
Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

The fields found in lguest_arch are not really per-guest,
but per-cpu (gdt, idt, etc). So this patch turns lguest_arch
into lg_cpu_arch.

It makes sense to have a per-guest per-arch struct, but this
can be addressed later, when the need arrives.
Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

This is the most obvious per-vcpu field: registers.

So this patch moves it from struct lguest to struct vcpu,
and patch the places in which they are used, accordingly
Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

emulate_insn() needs to know about current eip, which will be,
in the future, a per-vcpu thing. So in this patch, the function
prototype is modified to receive a vcpu struct
Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

The switcher needs to be mapped per-vcpu, because different vcpus
will potentially have different page tables (they don't have to,
because threads will share the same).

So our first step is the make the function receive a vcpu struct
Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

This patch adapts interrupt processing for using the vcpu struct.
Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

this patch changes do_hcall() and do_async_hcall() interfaces (and obviously their
callers) to get a vcpu struct. Again, a vcpu services the hypercall, not the whole
guest
Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

This patch makes the run_guest() routine use the lg_cpu struct.
This is required since in a smp guest environment, there's no
more the notion of "running the guest", but rather, it is "running the vcpu"
Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Replace all lock_cpu_hotplug/unlock_cpu_hotplug from the kernel and use
get_online_cpus and put_online_cpus instead as it highlights the
refcount semantics in these operations.

The new API guarantees protection against the cpu-hotplug operation, but
it doesn't guarantee serialized access to any of the local data
structures. Hence the changes needs to be reviewed.

In case of pseries_add_processor/pseries_remove_processor, use
cpu_maps_update_begin()/cpu_maps_update_done() as we're modifying the
cpu_present_map there.
Signed-off-by: NGautham R Shenoy <ego@in.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Went through the documentation doing typo and content fixes.  This
patch contains only comment and whitespace changes.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Jes complains that page table code still uses lgread_u32 even though
it now uses general kernel pte types.  The best thing to do is to
generalize lgread_u32 and lgwrite_u32.

This means we lose the efficiency of getuser().  We could potentially
regain it if we used __copy_from_user instead of copy_from_user, but
I'm not certain that our range check is equivalent to access_ok() on
all platforms.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Acked-by: NJes Sorensen <jes@sgi.com>

This gets rid of the lguest bus, drivers and DMA mechanism, to make
way for a generic virtio mechanism.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

1) This allows us to get alot closer to booting bzImages.

2) It means we don't have to know page_offset.

3) The Guest needs to modify the boot pagetables to create the
   PAGE_OFFSET mapping before jumping to C code.

4) guest_pa() walks the page tables rather than using page_offset.

5) We don't use page_offset to figure out whether to emulate: it was
   always kinda quesationable, and won't work for instructions done
   before remapping (bzImage unpacking in particular).

6) We still want the kernel address for tlb flushing: have the initial
   hypercall give us that, too.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

(Based on Ron Minnich's LGUEST_PLAN9_SYSCALL patch).

This patch allows Guests to specify what system call vector they want,
and we try to reserve it.  We only allow one non-Linux system call
vector, to try to avoid DoS on the Host.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Move setup_regs() to lguest_arch_setup_regs() in i386_core.c given
that this is very architecture specific.
Signed-off-by: NJes Sorensen <jes@sgi.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Clean up the hypercall code to make the code in hypercalls.c
architecture independent. First process the common hypercalls and
then call lguest_arch_do_hcall() if the call hasn't been handled.
Rename struct hcall_ring to hcall_args.

This patch requires the previous patch which reorganize the layout of
struct lguest_regs on i386 so they match the layout of struct
hcall_args.
Signed-off-by: NJes Sorensen <jes@sgi.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Currently we look at the "trapnum" to see if the Guest wants a
hypercall.  But once the hypercall is done we have to reset trapnum to
a bogus value, otherwise if we exit to userspace and return, we'd run
the same hypercall twice (that was a nasty bug to find!).

This has two main effects:

1) When Jes's patch changes the hypercall args to be a generic "struct
   hcall_args" we simply change the type of "lg->hcall".  It's set by
   arch code, so if it has to copy args or something it can do so, and
   point "hcall" into lg->arch somewhere.

2) Async hypercalls only get run when an actual hypercall is pending.
   This simplfies the code a little and is a more logical semantic.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Move eax next to ebx/ecx/edx in struct lguest_regs on i386, so they
will be located together and allow it to map directly to a struct
hcall_ring entry (which will be renamed struct hcall_args as in a
subsequent patch).

This is in preparation for making the code hcall code architecture
independent.
Signed-off-by: NJes Sorensen <jes@sgi.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Separate i386 architecture specific from core.c and move it to
x86/core.c and add x86/lguest.h header file to match.
Signed-off-by: NJes Sorensen <jes@sgi.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

lguest uses a "switcher" shim mapped high to bounce between host and
guest.  As lguest becomes less i386-centric, we separate this code
into a subdir.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>