The davinci_cpdma mixes up physical addresses as seen from the CPU
and DMA addresses as seen from a DMA master, since it can operate
on both normal memory or an on-chip buffer. If dma_addr_t is
different from phys_addr_t, this means we get a compile-time warning
about the type mismatch:

ethernet/ti/davinci_cpdma.c: In function 'cpdma_desc_pool_create':
ethernet/ti/davinci_cpdma.c:182:48: error: passing argument 3 of 'dma_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types]
   pool->cpumap = dma_alloc_coherent(dev, size, &pool->phys,
In file included from ethernet/ti/davinci_cpdma.c:21:0:
dma-mapping.h:398:21: note: expected 'dma_addr_t * {aka long long unsigned int *}' but argument is of type 'phys_addr_t * {aka unsigned int *}'
 static inline void *dma_alloc_coherent(struct device *dev, size_t size,

This slightly restructures the code so the address we use for
mapping RAM into a DMA address is always a dma_addr_t, avoiding
the warning. The code is correct even if both types are 32-bit
because the DMA master in this device only supports 32-bit addressing
anyway, independent of the types that are used.

We still assign this value to pool->phys, and that is wrong if
the driver is ever used with an IOMMU, but that value appears to
be never used, so there is no problem really. I've added a couple
of comments about where we do things that are slightly violating
the API.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Paolo Abeni says:

====================
ipv6: fix sticky pktinfo behaviour

Currently:

ip addr add dev eth0 2001:0010::1/64
ip addr add dev eth1 2001:0020::1/64
ping6 -I eth0 2001:0020::2

do not lead to the expected results, i.e. eth1 is used as the
egress interface.

This is due to two related issues in handling sticky pktinfo,
used by ping6 to enforce the device binding:

- ip6_dst_lookup_flow()/ip6_dst_lookup_tail() do not really enforce
flowi6_oif match
- ipv6 udp connect() just ignore flowi6_oif

These patches address each issue individually.

The kernel has never enforced the egress interface specified
via the sticky pktinfo, except briefly between the commits
741a11d9 ("net: ipv6: Add RT6_LOOKUP_F_IFACE flag if oif is set")
and
d46a9d67 ("net: ipv6: Dont add RT6_LOOKUP_F_IFACE flag if saddr set"),
but the ping6 tools was unaffected up to iputils-20100214,
since before it used SO_BINDTODEVICE to enforce the egress
interface.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, the egress interface index specified via IPV6_PKTINFO
is ignored by __ip6_datagram_connect(), so that RFC 3542 section 6.7
can be subverted when the user space application calls connect()
before sendmsg().
Fix it by initializing properly flowi6_oif in connect() before
performing the route lookup.
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current implementation of ip6_dst_lookup_tail basically
ignore the egress ifindex match: if the saddr is set,
ip6_route_output() purposefully ignores flowi6_oif, due
to the commit d46a9d67 ("net: ipv6: Dont add RT6_LOOKUP_F_IFACE
flag if saddr set"), if the saddr is 'any' the first route lookup
in ip6_dst_lookup_tail fails, but upon failure a second lookup will
be performed with saddr set, thus ignoring the ifindex constraint.

This commit adds an output route lookup function variant, which
allows the caller to specify lookup flags, and modify
ip6_dst_lookup_tail() to enforce the ifindex match on the second
lookup via said helper.

ip6_route_output() becames now a static inline function build on
top of ip6_route_output_flags(); as a side effect, out-of-tree
modules need now a GPL license to access the output route lookup
functionality.
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-for-davem-2016-01-29' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
iwlwifi

* Fix support for 3168 device:
  * NVM version
  * firmware file name
  * device IDs
* Fix a compilation warning in dvm calibration code
* Fix the TPC (reduced Tx Power) code. This fixes performance issues
* Add device IDs for 8265

rtx2x00

* fix monitor mode regression dating back to 4.1

brcmfmac

* fix sdio initialisation related crash

rtlwifi

* rtl8821ae: Fix 5G failure when EEPROM is incorrectly encoded

ath9k

* ignore eeprom magic mismatch on flash based devices
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We should not trim skb for mmaped socket since its buf size is fixed
and userspace will read as frame which data equals head. mmaped
socket will not call recvmsg, means max_recvmsg_len is 0,
skb_reserve was not called before commit: db65a3aa.

Fixes: db65a3aa (netlink: Trim skb to alloc size to avoid MSG_TRUNC)
Signed-off-by: NKen-ichirou MATSUZAWA <chamas@h4.dion.ne.jp>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The size of all_zeros_mac is 6 byte, but eth_hash() will access the
8 byte, and KASan reported the below bug:

[ 8596.479031] BUG: KASan: out of bounds access in __vxlan_find_mac+0x24/0x100 at addr ffffffff841514c0
[ 8596.487647] Read of size 8 by task ip/52820
[ 8596.490818] Address belongs to variable all_zeros_mac+0x0/0x40
[ 8596.496051] CPU: 0 PID: 52820 Comm: ip Tainted: G WC 4.1.15 #1
[ 8596.503520] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 02/10/2014
[ 8596.509365] ffffffff841514c0 ffff88007450f0b8 ffffffff822fa5e1 0000000000000032
[ 8596.516112] ffff88007450f150 ffff88007450f138 ffffffff812dd58c ffff88007450f1d8
[ 8596.522856] ffffffff81113b80 0000000000000282 0000000000000001 ffffffff8101ee4d
[ 8596.529599] Call Trace:
[ 8596.530858] [<ffffffff822fa5e1>] dump_stack+0x4f/0x7b
[ 8596.535080] [<ffffffff812dd58c>] kasan_report_error+0x3bc/0x3f0
[ 8596.540258] [<ffffffff81113b80>] ? __lock_acquire+0x90/0x2140
[ 8596.545245] [<ffffffff8101ee4d>] ? save_stack_trace+0x2d/0x80
[ 8596.550234] [<ffffffff812dda70>] kasan_report+0x40/0x50
[ 8596.554647] [<ffffffff81b211e4>] ? __vxlan_find_mac+0x24/0x100
[ 8596.559729] [<ffffffff812dc399>] __asan_load8+0x69/0xa0
[ 8596.564141] [<ffffffff81b211e4>] __vxlan_find_mac+0x24/0x100
[ 8596.569033] [<ffffffff81b2683d>] vxlan_fdb_create+0x9d/0x570

it can be fixed by enlarging the all_zeros_mac to 8 byte, although it is
harmless; eth_hash() will be called in other place with the memory which
is larger and equal to 8 byte.
Signed-off-by: NLi RongQing <roy.qing.li@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently the port based VLAN maps should be configured to allow every
port to egress frames on all other ports, except themselves.

The debugfs interface shows that they are misconfigured. For instance, a
7-port switch has the following content in the related register 0x06:

       GLOBAL GLOBAL2 SERDES   0    1    2    3    4    5    6
    ...
    6:  1fa4    1f0f       4   7f   7e   7d   7c   7b   7a   79
    ...

This means that port 3 is allowed to talk to port 2-6, but cannot talk
to ports 0 and 1. With this fix, port 3 can correctly talk to all ports
except 3 itself:

       GLOBAL GLOBAL2 SERDES   0    1    2    3    4    5    6
    ...
    6:  1fa4    1f0f       4   7e   7d   7b   77   6f   5f   3f
    ...

Fixes: ede8098d ("net: dsa: mv88e6xxx: bridges do not need an FID")
Reported-by: NKevin Smith <kevin.smith@elecsyscorp.com>
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Tested-by: NKevin Smith <kevin.smith@elecsyscorp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The fib_table_lookup function had a shift by 32 that triggered a UBSAN
warning.  This was due to the fact that I had placed the shift first and
then followed it with the check for the suffix length to ignore the
undefined behavior.  If we reorder this so that we verify the suffix is
less than 32 before shifting the value we can avoid the issue.
Reported-by: NToralf Förster <toralf.foerster@gmx.de>
Signed-off-by: NAlexander Duyck <aduyck@mirantis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The moxart ethernet driver confuses coherent DMA buffers with
MMIO registers.

moxart_ether.c: In function 'moxart_mac_setup_desc_ring':
moxart_ether.c:146:428: error: passing argument 1 of '__fswab32' makes integer from pointer without a cast [-Werror=int-conversion]
moxart_ether.c:74:39: warning: incorrect type in argument 3 (different address spaces)
moxart_ether.c:74:39:    expected void *cpu_addr
moxart_ether.c:74:39:    got void [noderef] <asn:2>*tx_desc_base

This leaves the basic logic alone and uses normal pointers for
the virtual address of the descriptor. As we cannot use readl/writel
to access them, we also introduce our own moxart_desc_read
moxart_desc_write helpers that perform the same endianess swap
as the original code, but without the address space conversion.

The barriers are made explicit here where needed: Even in the worst-case
scenario, we just have to use a rmb() after checking ownership so
we don't read any input data before we are sure it is value, and we
use wmb() before transferring ownership back to the device.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When CONFIG_PROC_FS, CONFIG_IP_PNP_BOOTP, CONFIG_IP_PNP_DHCP and
CONFIG_IP_PNP_RARP are all disabled, we get a warning about the
ic_proto_used variable being unused:

net/ipv4/ipconfig.c:146:12: error: 'ic_proto_used' defined but not used [-Werror=unused-variable]

This avoids the warning, by making the definition conditional on
whether a dynamic IP configuration protocol is configured. If not,
we know that the value is always zero, so we can optimize away the
variable and all code that depends on it.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Michael Chan says:

====================
bnxt_en: Bug fixes.

3 small bug fix patches for net.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ring index j is not wrapped properly at the end of the ring, causing
it to reference pointers past the end of the ring.  For proper loop
termination and to access the ring properly, we need to increment j and
mask it before referencing the ring entry.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This hardware counter is misleading as it counts dropped packets that
don't match the hardware filters for unicast/broadcast/multicast.  We
will still report this counter in ethtool -S for diagnostics purposes.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use completion ring for ring free response from firmware.  The response
will be the last entry in the ring and we can free the ring after getting
the response.  This will guarantee no spurious DMA to freed memory.
Signed-off-by: NPrashant Sreedharan <prashant@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are cases where qdisc_dequeue_peeked can return NULL, and the result
is dereferenced later on in the function.

Similarly to the other qdisc dequeue functions, check whether the skb
pointer is NULL and if it is, goto out.
Signed-off-by: NBernie Harris <bernie.harris@alliedtelesis.co.nz>
Reviewed-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert the driver to use ns_to_timespec64() and timespec64_to_ns()
instead of open coding the same logic.
Signed-off-by: NKefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJörg Thalheim <joerg@higgsboson.tk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently when a macvlan is being initialized and the lower device is
netif_carrier_ok(), the macvlan device doesn't run through
rfc2863_policy() and is left with UNKNOWN operstate. Fix it by adding an
unconditional linkwatch event for the new macvlan device. Similar fix is
already used by the 8021q device (see register_vlan_dev()). Also fix the
inconsistent state when the lower device has been down and its carrier
was changed (when a device is down NETDEV_CHANGE doesn't get generated).
The second issue can be seen f.e. when we have a macvlan on top of a 8021q
device which has been down and its real device has been changing carrier
states, after setting the 8021q device up, the macvlan device will have
the same carrier state as it was before even though the 8021q can now
have a different state.
Example for case 1:
4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP mode DEFAULT group default qlen 1000

$ ip l add l eth2 macvl0 type macvlan
$ ip l set macvl0 up
$ ip l sh macvl0
72: macvl0@eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
noqueue state UNKNOWN mode DEFAULT group default
    link/ether f6:0b:54:0a:9d:a3 brd ff:ff:ff:ff:ff:ff

Example for case 2 (order is important):
Prestate: eth2 UP/CARRIER, vlan1 down, vlan1-macvlan down
$ ip l set vlan1-macvlan up
$ ip l sh vlan1-macvlan
71: vlan1-macvlan@vlan1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500
qdisc noqueue state UNKNOWN mode DEFAULT group default
    link/ether 4a:b8:44:56:b9:b9 brd ff:ff:ff:ff:ff:ff

[ eth2 loses CARRIER before vlan1 has been UP-ed ]

$ ip l sh eth2
4: eth2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast
state DOWN mode DEFAULT group default qlen 1000
    link/ether 52:54:00:bf:57:16 brd ff:ff:ff:ff:ff:ff
$ ip l sh vlan1-macvlan
71: vlan1-macvlan@vlan1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500
qdisc noqueue state UNKNOWN mode DEFAULT group default
    link/ether 4a:b8:44:56:b9:b9 brd ff:ff:ff:ff:ff:ff
$ ip l set vlan1 up
$ ip l sh vlan1
70: vlan1@eth2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc
noqueue state LOWERLAYERDOWN mode DEFAULT group default qlen 1000
    link/ether 52:54:00:bf:57:16 brd ff:ff:ff:ff:ff:ff
$ ip l sh vlan1-macvlan
71: vlan1-macvlan@vlan1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500
qdisc noqueue state UNKNOWN mode DEFAULT group default
    link/ether 4a:b8:44:56:b9:b9 brd ff:ff:ff:ff:ff:ff

vlan1-macvlan is still UP, still has carrier and is still in the same
operstate as before. After the patch in case 1 macvl0 has state UP as it
should and in case 2 vlan1-macvlan has state LOWERLAYERDOWN again as it
should. Note that while the lower macvlan device is down their carrier
and thus operstate can go out of sync but that will be fixed once the
lower device goes up again.
This behaviour seems to have been present since beginning of git history.
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In 'commit 7fe8097c ("tipc: fix nullpointer bug when subscribing
to events")', we terminate the connection if the subscription
creation fails.
In the same commit, the subscription creation result was based on
the value of the subscription pointer (set in the function) instead
of the return code.

Unfortunately, the same function tipc_subscrp_create() handles
subscription cancel request. For a subscription cancellation request,
the subscription pointer cannot be set. Thus if a subscriber has
several subscriptions and cancels any of them, the connection is
terminated.

In this commit, we terminate the connection based on the return value
of tipc_subscrp_create().
Fixes: commit 7fe8097c ("tipc: fix nullpointer bug when subscribing to events")
Reviewed-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert the driver to use ns_to_timespec64() to keep consistency
with timespec64_to_ns() instead of open coding the same logic.
Signed-off-by: NKefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We should not assume a valid protocol header is present,
as this is not the case for IPv4 fragments.

Lets avoid extra cache line misses and potential bugs
if we actually find a socket and incorrectly uses its dst.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Andrew Lunn says:

====================
Part 2 of v4.5-rc1 phylib regression

White list PHY compatible values which indicate PHYs.  Issue a warning
when one is encountered.

Update the documentation to make it clear what is expected in the
compatible string.

v2:
Fix Grammar, reword changelog, add Tested-by and Acked-by.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

PHY devices may only list compatibility with clause 22, 45, and if
they need to be more specific, their PHY identifier values. No other
compatible strings are allowed.  Make this clear in the documentation,
and remove examples where make/model compatible strings are listed.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some phy nodes list a compatible value indicating the PHY make/model.
This is never used to match the device to the driver. However it does
confuse the code to separate a PHY from a generic MDIO device like a
switch. Generic MDIO devices must have a compatible value, PHYs can
list clause 22 or 45, but nothing else.

Issue a warning if we find a compatible value known on the whitelist,
and say it is a PHY.

Fixes: a9049e0c ("mdio: Add support for mdio drivers.")
Reported-by: NAaro Koskinen <aaro.koskinen@nokia.com>
Reported-by: NOlof Johansson <olof@lixom.net>
Tested-by: NAaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Woojung Huh says:

====================
lan78xx: update and fixes

  lan78xx: change to use updated phy-ignore-interrupts
  lan78xx: Add to handle mux control per chip id
  lan78xx: throttle TX path at slower than SuperSpeed USB
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Throttle TX path only at slower than SuperSpeed USB.
SuperSpeed USB has enough bandwidth to maintain GigE.
Signed-off-by: NWoojung Huh <woojung.huh@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Depends on chip, some EEPROM pins are muxed with LED function.
Disable & restore LED function to access EEPROM.
Signed-off-by: NWoojung Huh <woojung.huh@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update lan78xx to use patch of commit 4f2aaf7d
("Merge branch 'fix-phy-ignore-interrupts'").
Signed-off-by: NWoojung Huh <woojung.huh@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With some combinations of user provided flags in netlink command,
it is possible to call tcp_get_info() with a buffer that is not 8-bytes
aligned.

It does matter on some arches, so we need to use put_unaligned() to
store the u64 fields.

Current iproute2 package does not trigger this particular issue.

Fixes: 0df48c26 ("tcp: add tcpi_bytes_acked to tcp_info")
Fixes: 977cb0ec ("tcp: add pacing_rate information into tcp_info")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When switchdev drivers process FDB notifications from the underlying
device they resolve the netdev to which the entry points to and notify
the bridge using the switchdev notifier.

However, since the RTNL mutex is not held there is nothing preventing
the netdev from disappearing in the middle, which will cause
br_switchdev_event() to dereference a non-existing netdev.

Make switchdev drivers hold the lock at the beginning of the
notification processing session and release it once it ends, after
notifying the bridge.

Also, remove switchdev_mutex and fdb_lock, as they are no longer needed
when RTNL mutex is held.

Fixes: 03bf0c28 ("switchdev: introduce switchdev notifier")
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Trying to batch Tx response events results in poor performance because
this delays freeing the transmitted skbs.

Instead use the standard RING_FINAL_CHECK_FOR_RESPONSES() macro to be
notified once the next Tx response is placed on the ring.
Signed-off-by: NMalcolm Crossley <malcolm.crossley@citrix.com>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The code in txq_put_data() would use txq->tx_curr_desc to index the
tso_hdrs/tso_hdrs_dma buffers, for less than 8 bytes unaligned
fragments, which is already moved to the next descriptor at the
beginning of the function.

If that fragment was the last of the the skb, the next skb would use
that same space to place the ip headers, overwritting that small
fragment data.

Fixes: 91986fd3 (net: mv643xx_eth: Ensure proper data alignment in TSO TX path)
Signed-off-by: NNicolas Schichan <nschichan@freebox.fr>
Reviewed-by: NPhilipp Kirchhofer <philipp@familie-kirchhofer.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

of_phy_find_device() is used to find the phy device associated with a
device node. It is expected the node is for a PHY device, but in fact
it could of been probed as a generic MDIO device. Ensure the device is
a PHY before returning it.

Fixes: a9049e0c ("mdio: Add support for mdio drivers.")
Reported-by: NAaro Koskinen <aaro.koskinen@nokia.com>
Reported-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Tested-by: NAaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'mac80211-for-davem-2016-01-26' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Here's a first set of fixes for the 4.5-rc cycle:
 * make regulatory messages much less verbose by default
 * various remain-on-channel fixes
 * scheduled scanning fixes with hardware restart
 * a PS-Poll handling fix; was broken just recently
 * bugfix to avoid buffering non-bufferable MMPDUs
 * world regulatory domain data fix
 * a fix for scanning causing other work to get stuck
 * hwsim: revert an older problematic patch that caused some
   userspace tools to have issues - not that big a deal as
   it's a debug only driver though
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Not every arch has io memory.
So, unbreak the build by fixing the dependencies.
Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This commit fixes a corner case in tcp_mark_head_lost() which was
causing the WARN_ON(len > skb->len) in tcp_fragment() to fire.

tcp_mark_head_lost() was assuming that if a packet has
tcp_skb_pcount(skb) of N, then it's safe to fragment off a prefix of
M*mss bytes, for any M < N. But with the tricky way TCP pcounts are
maintained, this is not always true.

For example, suppose the sender sends 4 1-byte packets and have the
last 3 packet sacked. It will merge the last 3 packets in the write
queue into an skb with pcount = 3 and len = 3 bytes. If another
recovery happens after a sack reneging event, tcp_mark_head_lost()
may attempt to split the skb assuming it has more than 2*MSS bytes.

This sounds very counterintuitive, but as the commit description for
the related commit c0638c24 ("tcp: don't fragment SACKed skbs in
tcp_mark_head_lost()") notes, this is because tcp_shifted_skb()
coalesces adjacent regions of SACKed skbs, and when doing this it
preserves the sum of their packet counts in order to reflect the
real-world dynamics on the wire. The c0638c24 commit tried to
avoid problems by not fragmenting SACKed skbs, since SACKed skbs are
where the non-proportionality between pcount and skb->len/mss is known
to be possible. However, that commit did not handle the case where
during a reneging event one of these weird SACKed skbs becomes an
un-SACKed skb, which tcp_mark_head_lost() can then try to fragment.

The fix is to simply mark the entire skb lost when this happens.
This makes the recovery slightly more aggressive in such corner
cases before we detect reordering. But once we detect reordering
this code path is by-passed because FACK is disabled.
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Later parts of the stack (including fragmentation) expect that there is
never a socket attached to frag in a frag_list, however this invariant
was not enforced on all defrag paths. This could lead to the
BUG_ON(skb->sk) during ip_do_fragment(), as per the call stack at the
end of this commit message.

While the call could be added to openvswitch to fix this particular
error, the head and tail of the frags list are already orphaned
indirectly inside ip_defrag(), so it seems like the remaining fragments
should all be orphaned in all circumstances.

kernel BUG at net/ipv4/ip_output.c:586!
[...]
Call Trace:
 <IRQ>
 [<ffffffffa0205270>] ? do_output.isra.29+0x1b0/0x1b0 [openvswitch]
 [<ffffffffa02167a7>] ovs_fragment+0xcc/0x214 [openvswitch]
 [<ffffffff81667830>] ? dst_discard_out+0x20/0x20
 [<ffffffff81667810>] ? dst_ifdown+0x80/0x80
 [<ffffffffa0212072>] ? find_bucket.isra.2+0x62/0x70 [openvswitch]
 [<ffffffff810e0ba5>] ? mod_timer_pending+0x65/0x210
 [<ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90
 [<ffffffffa03205a2>] ? nf_conntrack_in+0x252/0x500 [nf_conntrack]
 [<ffffffff810b63c4>] ? __lock_is_held+0x54/0x70
 [<ffffffffa02051a3>] do_output.isra.29+0xe3/0x1b0 [openvswitch]
 [<ffffffffa0206411>] do_execute_actions+0xe11/0x11f0 [openvswitch]
 [<ffffffff810b63c4>] ? __lock_is_held+0x54/0x70
 [<ffffffffa0206822>] ovs_execute_actions+0x32/0xd0 [openvswitch]
 [<ffffffffa020b505>] ovs_dp_process_packet+0x85/0x140 [openvswitch]
 [<ffffffff810b63c4>] ? __lock_is_held+0x54/0x70
 [<ffffffffa02068a2>] ovs_execute_actions+0xb2/0xd0 [openvswitch]
 [<ffffffffa020b505>] ovs_dp_process_packet+0x85/0x140 [openvswitch]
 [<ffffffffa0215019>] ? ovs_ct_get_labels+0x49/0x80 [openvswitch]
 [<ffffffffa0213a1d>] ovs_vport_receive+0x5d/0xa0 [openvswitch]
 [<ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90
 [<ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90
 [<ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90
 [<ffffffffa0214895>] ? internal_dev_xmit+0x5/0x140 [openvswitch]
 [<ffffffffa02148fc>] internal_dev_xmit+0x6c/0x140 [openvswitch]
 [<ffffffffa0214895>] ? internal_dev_xmit+0x5/0x140 [openvswitch]
 [<ffffffff81660299>] dev_hard_start_xmit+0x2b9/0x5e0
 [<ffffffff8165fc21>] ? netif_skb_features+0xd1/0x1f0
 [<ffffffff81660f20>] __dev_queue_xmit+0x800/0x930
 [<ffffffff81660770>] ? __dev_queue_xmit+0x50/0x930
 [<ffffffff810b53f1>] ? mark_held_locks+0x71/0x90
 [<ffffffff81669876>] ? neigh_resolve_output+0x106/0x220
 [<ffffffff81661060>] dev_queue_xmit+0x10/0x20
 [<ffffffff816698e8>] neigh_resolve_output+0x178/0x220
 [<ffffffff816a8e6f>] ? ip_finish_output2+0x1ff/0x590
 [<ffffffff816a8e6f>] ip_finish_output2+0x1ff/0x590
 [<ffffffff816a8cee>] ? ip_finish_output2+0x7e/0x590
 [<ffffffff816a9a31>] ip_do_fragment+0x831/0x8a0
 [<ffffffff816a8c70>] ? ip_copy_metadata+0x1b0/0x1b0
 [<ffffffff816a9ae3>] ip_fragment.constprop.49+0x43/0x80
 [<ffffffff816a9c9c>] ip_finish_output+0x17c/0x340
 [<ffffffff8169a6f4>] ? nf_hook_slow+0xe4/0x190
 [<ffffffff816ab4c0>] ip_output+0x70/0x110
 [<ffffffff816a9b20>] ? ip_fragment.constprop.49+0x80/0x80
 [<ffffffff816aa9f9>] ip_local_out+0x39/0x70
 [<ffffffff816abf89>] ip_send_skb+0x19/0x40
 [<ffffffff816abfe3>] ip_push_pending_frames+0x33/0x40
 [<ffffffff816df21a>] icmp_push_reply+0xea/0x120
 [<ffffffff816df93d>] icmp_reply.constprop.23+0x1ed/0x230
 [<ffffffff816df9ce>] icmp_echo.part.21+0x4e/0x50
 [<ffffffff810b63c4>] ? __lock_is_held+0x54/0x70
 [<ffffffff810d5f9e>] ? rcu_read_lock_held+0x5e/0x70
 [<ffffffff816dfa06>] icmp_echo+0x36/0x70
 [<ffffffff816e0d11>] icmp_rcv+0x271/0x450
 [<ffffffff816a4ca7>] ip_local_deliver_finish+0x127/0x3a0
 [<ffffffff816a4bc1>] ? ip_local_deliver_finish+0x41/0x3a0
 [<ffffffff816a5160>] ip_local_deliver+0x60/0xd0
 [<ffffffff816a4b80>] ? ip_rcv_finish+0x560/0x560
 [<ffffffff816a46fd>] ip_rcv_finish+0xdd/0x560
 [<ffffffff816a5453>] ip_rcv+0x283/0x3e0
 [<ffffffff810b6302>] ? match_held_lock+0x192/0x200
 [<ffffffff816a4620>] ? inet_del_offload+0x40/0x40
 [<ffffffff8165d062>] __netif_receive_skb_core+0x392/0xae0
 [<ffffffff8165e68e>] ? process_backlog+0x8e/0x230
 [<ffffffff810b53f1>] ? mark_held_locks+0x71/0x90
 [<ffffffff8165d7c8>] __netif_receive_skb+0x18/0x60
 [<ffffffff8165e678>] process_backlog+0x78/0x230
 [<ffffffff8165e6dd>] ? process_backlog+0xdd/0x230
 [<ffffffff8165e355>] net_rx_action+0x155/0x400
 [<ffffffff8106b48c>] __do_softirq+0xcc/0x420
 [<ffffffff816a8e87>] ? ip_finish_output2+0x217/0x590
 [<ffffffff8178e78c>] do_softirq_own_stack+0x1c/0x30
 <EOI>
 [<ffffffff8106b88e>] do_softirq+0x4e/0x60
 [<ffffffff8106b948>] __local_bh_enable_ip+0xa8/0xb0
 [<ffffffff816a8eb0>] ip_finish_output2+0x240/0x590
 [<ffffffff816a9a31>] ? ip_do_fragment+0x831/0x8a0
 [<ffffffff816a9a31>] ip_do_fragment+0x831/0x8a0
 [<ffffffff816a8c70>] ? ip_copy_metadata+0x1b0/0x1b0
 [<ffffffff816a9ae3>] ip_fragment.constprop.49+0x43/0x80
 [<ffffffff816a9c9c>] ip_finish_output+0x17c/0x340
 [<ffffffff8169a6f4>] ? nf_hook_slow+0xe4/0x190
 [<ffffffff816ab4c0>] ip_output+0x70/0x110
 [<ffffffff816a9b20>] ? ip_fragment.constprop.49+0x80/0x80
 [<ffffffff816aa9f9>] ip_local_out+0x39/0x70
 [<ffffffff816abf89>] ip_send_skb+0x19/0x40
 [<ffffffff816abfe3>] ip_push_pending_frames+0x33/0x40
 [<ffffffff816d55d3>] raw_sendmsg+0x7d3/0xc30
 [<ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90
 [<ffffffff816e7557>] ? inet_sendmsg+0xc7/0x1d0
 [<ffffffff810b63c4>] ? __lock_is_held+0x54/0x70
 [<ffffffff816e759a>] inet_sendmsg+0x10a/0x1d0
 [<ffffffff816e7495>] ? inet_sendmsg+0x5/0x1d0
 [<ffffffff8163e398>] sock_sendmsg+0x38/0x50
 [<ffffffff8163ec5f>] ___sys_sendmsg+0x25f/0x270
 [<ffffffff811aadad>] ? handle_mm_fault+0x8dd/0x1320
 [<ffffffff8178c147>] ? _raw_spin_unlock+0x27/0x40
 [<ffffffff810529b2>] ? __do_page_fault+0x1e2/0x460
 [<ffffffff81204886>] ? __fget_light+0x66/0x90
 [<ffffffff8163f8e2>] __sys_sendmsg+0x42/0x80
 [<ffffffff8163f932>] SyS_sendmsg+0x12/0x20
 [<ffffffff8178cb17>] entry_SYSCALL_64_fastpath+0x12/0x6f
Code: 00 00 44 89 e0 e9 7c fb ff ff 4c 89 ff e8 e7 e7 ff ff 41 8b 9d 80 00 00 00 2b 5d d4 89 d8 c1 f8 03 0f b7 c0 e9 33 ff ff f
 66 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48
RIP  [<ffffffff816a9a92>] ip_do_fragment+0x892/0x8a0
 RSP <ffff88006d603170>

Fixes: 7f8a436e ("openvswitch: Add conntrack action")
Signed-off-by: NJoe Stringer <joe@ovn.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Xin Long says:

====================
fix the transport dead race check by using atomic_add_unless on refcnt

  sctp: fix the transport dead race check by using atomic_add_unless on
    refcnt
  sctp: hold transport before we access t->asoc in sctp proc
  sctp: remove the dead field of sctp_transport
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After we use refcnt to check if transport is alive, the dead can be
removed from sctp_transport.

The traversal of transport_addr_list in procfs dump is using
list_for_each_entry_rcu, no need to check if it has been freed.

sctp_generate_t3_rtx_event and sctp_generate_heartbeat_event is
protected by sock lock, it's not necessary to check dead, either.
also, the timers are cancelled when sctp_transport_free() is
called, that it doesn't wait for refcnt to reach 0 to cancel them.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>