Anton noted that for inherited counters the counter-id as provided by
PERF_SAMPLE_ID isn't mappable to the id found through PERF_RECORD_ID
because each inherited counter gets its own id.

His suggestion was to always return the parent counter id, since that
is the primary counter id as exposed. However, these inherited
counters have a unique identifier so that events like
PERF_EVENT_PERIOD and PERF_EVENT_THROTTLE can be specific about which
counter gets modified, which is important when trying to normalize the
sample streams.

This patch removes PERF_EVENT_PERIOD in favour of PERF_SAMPLE_PERIOD,
which is more useful anyway, since changing periods became a lot more
common than initially thought -- rendering PERF_EVENT_PERIOD the less
useful solution (also, PERF_SAMPLE_PERIOD reports the more accurate
value, since it reports the value used to trigger the overflow,
whereas PERF_EVENT_PERIOD simply reports the requested period changed,
which might only take effect on the next cycle).

This still leaves us PERF_EVENT_THROTTLE to consider, but since that
_should_ be a rare occurrence, and linking it to a primary id is the
most useful bit to diagnose the problem, we introduce a
PERF_SAMPLE_STREAM_ID, for those few cases where the full
reconstruction is important.

[Does change the ABI a little, but I see no other way out]
Suggested-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1248095846.15751.8781.camel@twins>

Per example of Arjan's patch, I went through and found a few more.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>

the "reserved" field was not initialized to zero, resulting in 4 bytes
of stack data leaking to userspace....
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>

Fix a gcc unused variables warning.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>

perf record uses -g for logging call graph data but perf report
uses -c to print call graph data. Be consistent and use -g
everywhere for call graph data.

Also update the help text to reflect the current default -
fractal,0.5
Signed-off-by: NAnton Blanchard <anton@samba.org>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090716104817.803604373@samba.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add the -d or --data option to log event addresses (eg page
faults).
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090716104817.697698033@samba.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Right now we don't output vfork events. Even though we should
always see an exec after a vfork, we may get perfcounter
samples between the vfork and exec. These samples can lead to
some confusion when parsing perfcounter data.

To keep things consistent we should always log a fork event. It
will result in a little more log data, but is less confusing to
trace parsing tools.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090716104817.589309391@samba.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

perf record synthesizes mmap events for the running process.
Right now it just catches file mappings, but we can check for
the vdso symbol and add that too.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090716104817.517264409@samba.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

There are a few places we are leaking tiny amounts of kernel
memory to userspace. This happens when writing out strings
because we always align the end to 64 bits.

To avoid this we should always use an appropriately sized
temporary buffer and ensure it is zeroed.

Since d_path assembles the string from the end of the buffer
backwards, we need to add 64 bits after the buffer to allow for
alignment.

We also need to copy arch_vma_name to the temporary buffer,
because if we use it directly we may end up copying to
userspace a number of bytes after the end of the string
constant.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090716104817.273972048@samba.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Keep index within event_type_descriptors[]
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A5A7F0B.4070106@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Fix a missed rename in EVENT_PROFILE support so that it gets
built and allows tracepoint tracing from the 'perf' tool.

Fix a typo in the (never before built & enabled) portion in
perf_counter.c as well, and update that code to the
attr.config changes as well.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Gamari <bgamari.foss@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1246869094-21237-1-git-send-email-chris@chris-wilson.co.uk>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

I've attached a patch to remove the Pentium M special casing of
EMON and as noticed at least with my Pentium M the hardware PMU
now works:

 Performance counter stats for '/bin/ls /var/tmp':

       1.809988  task-clock-msecs         #      0.125 CPUs
              1  context-switches         #      0.001 M/sec
              0  CPU-migrations           #	 0.000 M/sec
            224  page-faults              #	 0.124 M/sec
        1425648  cycles                   #    787.656 M/sec
         912755  instructions             #	 0.640 IPC

Vince suggested that this code was trying to address erratum
Y17 in Pentium-M's:

  http://download.intel.com/support/processors/mobile/pm/sb/25266532.pdf

But that erratum (related to IA32_MISC_ENABLES.7) does not
affect perfcounters as we dont use this toggle to disable RDPMC
and WRMSR/RDMSR access to performance counters. We keep cr4's
bit 8 (X86_CR4_PCE) clear so unprivileged RDPMC access is not
allowed anyway.

Cc: Vince Weaver <vince@deater.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@googlemail.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

[acme@doppio pahole]$ perf report -ns comm,dso,symbol -d /lib64/libc-2.10.1.so -C pahole | head -17
    21.94%      32101  [.] _int_malloc
    20.10%      29402  [.] __GI_strcmp
    16.77%      24533  [.] __tsearch
    12.61%      18450  [.] malloc_consolidate
     6.42%       9394  [.] _int_free
     6.28%       9191  [.] __tfind
     4.56%       6678  [.] __GI___libc_free
     4.46%       6520  [.] _IO_vfprintf_internal
     2.59%       3786  [.] __malloc
     1.17%       1716  [.] __GI_memcpy
[acme@doppio pahole]$
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1247325517-12272-5-git-send-email-acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

So we need to get the richer .symtab from the debuginfo
packages but the PLT info from the original DSO where we have
just the leaner .dynsym symtab.

Example:

| [acme@doppio pahole]$ perf report --sort comm,dso,symbol > before
| [acme@doppio pahole]$ perf report --sort comm,dso,symbol > after
| [acme@doppio pahole]$ diff -U1 before after
| --- before	2009-07-11 11:04:22.688595741 -0300
| +++ after	2009-07-11 11:04:33.380595676 -0300
| @@ -80,3 +80,2 @@
|       0.07%  pahole ./build/pahole              [.] pahole_stealer
| -     0.06%  pahole /usr/lib64/libdw-0.141.so   [.] 0x00000000007140
|       0.06%  pahole /usr/lib64/libdw-0.141.so   [.] __libdw_getabbrev
| @@ -91,2 +90,3 @@
|       0.06%  pahole [kernel]                    [k] free_hot_cold_page
| +     0.06%  pahole /usr/lib64/libdw-0.141.so   [.] tfind@plt
|       0.05%  pahole ./build/libdwarves.so.1.0.0 [.] ftype__add_parameter
| @@ -242,2 +242,3 @@
|       0.01%  pahole [kernel]                    [k] account_group_user_time
| +     0.01%  pahole /usr/lib64/libdw-0.141.so   [.] strlen@plt
|       0.01%  pahole ./build/pahole              [.] strcmp@plt
| [acme@doppio pahole]$
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1247325517-12272-4-git-send-email-acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

When we filter by column content we may end up with a column
that has the same value for all the lines. So remove that
column and tell its unique value on the top, as a comment.

Example:

  [acme@doppio pahole]$  perf report --sort comm,dso,symbol -d ./build/libdwarves.so.1.0.0 -C pahole | head -15
  # dso: ./build/libdwarves.so.1.0.0
  # comm: pahole
  # Samples: 58409
  #
  # Overhead  Symbol
  # ........  ......
  #
      20.93%  [.] tag__recode_dwarf_type
      14.94%  [.] namespace__recode_dwarf_types
      10.38%  [.] cu__table_add_tag
       6.69%  [.] __die__process_tag
       5.05%  [.] die__process_function
       4.70%  [.] list__for_all_tags
       3.68%  [.] tag__init
       3.48%  [.] die__create_new_parameter
  [acme@doppio pahole]$
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1247325517-12272-3-git-send-email-acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The strlist__entry method allows accessing strlists like an
array, will be used in the 'perf report' to access the first
entry.

We now keep the nr_entries so that we can check if we have just
one entry, will be used in 'perf report' to improve the output
by showing just at the top when we have just, say, one DSO.

While at it use nr_entries to optimize strlist__is_empty by not
using the far more costly rb_first based implementation.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1247325517-12272-2-git-send-email-acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Always printing the level info about if it is in the kernel,
hypervisor or userspace as that is in the hist_entry.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1247325517-12272-1-git-send-email-acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Auto-adjust column width of perf report output to the
longest occuring string length.

Example:

[acme@doppio pahole]$  perf report --sort comm,dso,symbol | head -13

    12.79%   pahole  /usr/lib64/libdw-0.141.so    [.] __libdw_find_attr
     8.90%   pahole  /lib64/libc-2.10.1.so        [.] _int_malloc
     8.68%   pahole  /usr/lib64/libdw-0.141.so    [.] __libdw_form_val_len
     8.15%   pahole  /lib64/libc-2.10.1.so        [.] __GI_strcmp
     6.80%   pahole  /lib64/libc-2.10.1.so        [.] __tsearch
     5.54%   pahole  ./build/libdwarves.so.1.0.0  [.] tag__recode_dwarf_type
[acme@doppio pahole]$

[acme@doppio pahole]$  perf report --sort comm,dso,symbol -d /lib64/libc-2.10.1.so | head -10

    21.92%   pahole  /lib64/libc-2.10.1.so  [.] _int_malloc
    20.08%   pahole  /lib64/libc-2.10.1.so  [.] __GI_strcmp
    16.75%   pahole  /lib64/libc-2.10.1.so  [.] __tsearch
[acme@doppio pahole]$

Also add these extra options to control the new behaviour:

  -w, --field-width

Force each column width to the provided list, for large terminal
readability.

  -t, --field-separator:

Use a special separator character and don't pad with spaces, replacing
all occurances of this separator in symbol names (and other output) with
a '.' character, that thus it's the only non valid separator.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20090711014728.GH3452@ghostprotocols.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Instead of open coding the unclone context thingy, put it in
a common function.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Ingo noticed that both AMD and P6 call
x86_pmu_disable_counter() on *_pmu_enable_counter(). This is
because we rely on the side effect of that call to program
the event config but not touch the EN bit.

We change that for AMD by having enable_all() simply write
the full config in, and for P6 by explicitly coding it.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The P6 doesn't seem to support cache ref/hit/miss counts, so
we extend the generic hardware event codes to have 0 and -1
mean the same thing as for the generic cache events.

Furthermore, it turns out the 0 event does not count
(that is, its reported that on PPro it actually does count
something), therefore use a event configuration that's
specified not to count to disable the counters.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add basic P6 PMU support. The P6 uses the EVNTSEL0 EN bit to
enable/disable both its counters. We use this for the
global enable/disable, and clear all config bits (except EN)
to disable individual counters.

Actual ia32 hardware doesn't support lfence, so use a locked
op without side-effect to implement a full barrier.

perf stat and perf record seem to function correctly.

[a.p.zijlstra@chello.nl: cleanups and complete the enable/disable code]
Signed-off-by: NVince Weaver <vince@deater.net>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <Pine.LNX.4.64.0907081718450.2715@pianoman.cluster.toy>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The cache events contain '$' which will hit shell variable
expansion. To avoid confusion change this to 'cache', ie
L1-d$-loads becomes L1-dcache-loads.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Jaswinder Singh Rajput <jaswinder@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20090706120131.GB4391@kryten>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The current callchain displays the overhead rates as absolute:
relative to the total overhead.

This patch provides relative overhead percentage, in which each
branch of the callchain tree is a independant instrumentated object.

This provides a 'fractal' view of the call-chain profile: each
sub-graph looks like a profile in itself - relative to its parent.

You can produce such output by using the "fractal" mode
that you can abbreviate via f, fr, fra, frac, etc...

./perf report -s sym -c fractal

Example:

     8.46%  [k] copy_user_generic_string
                |
                |--52.01%-- generic_file_aio_read
                |          do_sync_read
                |          vfs_read
                |          |
                |          |--97.20%-- sys_pread64
                |          |          system_call_fastpath
                |          |          pread64
                |          |
                |           --2.81%-- sys_read
                |                     system_call_fastpath
                |                     __read
                |
                |--39.85%-- generic_file_buffered_write
                |          __generic_file_aio_write_nolock
                |          generic_file_aio_write
                |          do_sync_write
                |          reiserfs_file_write
                |          vfs_write
                |          |
                |          |--97.05%-- sys_pwrite64
                |          |          system_call_fastpath
                |          |          __pwrite64
                |          |
                |           --2.95%-- sys_write
                |                     system_call_fastpath
                |                     __write_nocancel
[...]
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246772361-9960-5-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The cumul hits are the number of hits of every childs of a node
plus the hits of the current nodes, required for percentage
computing of a branch.

Theses numbers are calculated during the sorting of the branches of
the callchain tree using a depth first postfix traversal, so that
cumulative hits are propagated in the right order.

But if we plan to implement percentages relative to the parent and not
absolute percentages (relative to the whole overhead), we need to know
the cumulative hits of the parent before computing the children
because the relative minimum acceptable number of entries (ie: minimum
rate against the cumulative hits from the parent) is the basis to
filter the children against a given rate.

Then we need to handle the cumul hits on the fly to prepare the
implementation of relative overhead rates.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246772361-9960-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The default callchain parameters are set to use the flat mode and never
filter any overhead threshold of backtrace.

But flat mode is boring compared to graph mode.
Also the number of callchains may be very high if none is
filtered.

Let's change this to set the graph view and a minimum overhead of 0.5%
as default parameters.
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246772361-9960-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

If the user doesn't provide options to tune his callchain output
(ie: if he uses -c without arguments) then the default value passed
in the OPT_CALLBACK_DEFAULT() macro is used.

But it's parsed later by strtok() which will replace comma separators
to a zero. This may segfault as we are using a read-only string.

Use a modifiable one instead, and also fix the "100%" default
minimum threshold value by turning it into a 0 (output every callchains)
as it was intended in the origin.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246772361-9960-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

perf report segfaults while trying to handle callchains from a non
callchain data file.

Instead of a segfault, print a useful message to the user.
Reported-by: NJens Axboe <jens.axboe@oracle.com>
Reported-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246772361-9960-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Now atomic64_read() is light weight (no register pressure and
small icache), we can inline it again.

Also use "=&A" constraint instead of "+A" to avoid warning
about unitialized 'res' variable. (gcc had to force 0 in eax/edx)

  $ size vmlinux.prev vmlinux.after
     text    data     bss     dec     hex filename
  4908667  451676 1684868 7045211  6b805b vmlinux.prev
  4908651  451676 1684868 7045195  6b804b vmlinux.after
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <4A4E1AA2.30002@gmail.com>
[ Also fix typo in atomic64_set() export ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Linus noticed that the variable name 'old_val' is
confusingly named in these functions - the correct
naming is 'new_val'.
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <alpine.LFD.2.01.0907030942260.3210@localhost.localdomain>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Remove the read-first logic from atomic64_xchg() and simplify
the loop.

This function was the last user of __atomic64_read() - remove it.

Also, change the 'real_val' assumption from the somewhat quirky
1ULL << 32 value to the (just as arbitrary, but simpler) value
of 0.
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <tip-05118ab8859492ac9ddda0154cf90e37b0a4a0b0@git.kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

atomic64_t primitives are used by a handful of drivers,
so export the APIs consistently. These were inlined
before.

Also mark atomic64_32.o a core object, so that the symbols
are available even if not linked to core kernel pieces.

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <tip-05118ab8859492ac9ddda0154cf90e37b0a4a0b0@git.kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Optimize atomic64_read() as a special open-coded
cmpxchg8b variant. This generates nicer code:

arch/x86/lib/atomic64_32.o:

   text	   data	    bss	    dec	    hex	filename
    435	      0	      0	    435	    1b3	atomic64_32.o.before
    431	      0	      0	    431	    1af	atomic64_32.o.after

md5:
   bd8ab95e69c93518578bfaf0ea3be4d9  atomic64_32.o.before.asm
   2bdfd4bd1f6b7b61b7fc127aef90ce3b  atomic64_32.o.after.asm

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <alpine.LFD.2.01.0907021653030.3210@localhost.localdomain>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Occasionally we get bugs where atomic_read or atomic_set are
used on atomic64_t variables or vice versa.  These bugs don't
generate warnings on x86 because atomic_read and atomic_set are
coded as macros rather than C functions, so we don't get any
type-checking on their arguments; similarly for atomic64_read
and atomic64_set in 64-bit kernels.

This converts them to C functions so that the arguments are
type-checked and bugs like this will get caught more easily. It
also converts atomic_cmpxchg and atomic_xchg, and
atomic64_cmpxchg and atomic64_xchg on 64-bit, so we get
type-checking on their arguments too.

Compiling a typical 64-bit x86 config, this generates no new
warnings, and the vmlinux text is 86 bytes smaller.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <alpine.LFD.2.01.0907021653030.3210@localhost.localdomain>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Linus noticed that atomic64_xchg() uses atomic_read(), which
happens to work because atomic_read() is a macro so the
.counter value gets u64-read on 32-bit too - but this is really
bogus and serious bugs are waiting to happen.

Fix atomic64_xchg() to use __atomic64_read() instead.

No code changed:

arch/x86/lib/atomic64_32.o:

   text	   data	    bss	    dec	    hex	filename
    435	      0	      0	    435	    1b3	atomic64_32.o.before
    435	      0	      0	    435	    1b3	atomic64_32.o.after

md5:
   bd8ab95e69c93518578bfaf0ea3be4d9  atomic64_32.o.before.asm
   bd8ab95e69c93518578bfaf0ea3be4d9  atomic64_32.o.after.asm
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <alpine.LFD.2.01.0907021653030.3210@localhost.localdomain>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Linus noticed that atomic64_xchg() uses atomic_read(), which
happens to work because atomic_read() is a macro so the
.counter value gets u64-read on 32-bit too - but this is really
bogus and serious bugs are waiting to happen.

Change atomic_read() to be a type-safe inline, and this exposes
the atomic64 bogosity as well:

  arch/x86/lib/atomic64_32.c: In function ‘atomic64_xchg’:
  arch/x86/lib/atomic64_32.c:39: warning: passing argument 1 of ‘atomic_read’ from incompatible pointer type
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <alpine.LFD.2.01.0907021653030.3210@localhost.localdomain>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

cmpxchg8b is a huge instruction in terms of register footprint,
we almost never want to inline it, not even within the same
code module.

GCC 4.3 still messes up for two functions, under-judging the
true cost of this instruction - so annotate two key functions
to reduce the bloat:

arch/x86/lib/atomic64_32.o:

   text	   data	    bss	    dec	    hex	filename
   1763	      0	      0	   1763	    6e3	atomic64_32.o.before
    435	      0	      0	    435	    1b3	atomic64_32.o.after

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <alpine.LFD.2.01.0907021653030.3210@localhost.localdomain>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Linus noted (based on Eric Dumazet's numbers) that we would
probably be better off not trying an atomic_read() in
atomic64_add_return() but intead intentionally let the first
cmpxchg8b fail - to get a cache-friendly 'give me ownership
of this cacheline' transaction. That can then be followed
by the real cmpxchg8b which sets the value local to the CPU.
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <alpine.LFD.2.01.0907021653030.3210@localhost.localdomain>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Rewrite cmpxchg8b() to not use %edi register but a generic "+m"
constraint, to increase compiler freedom in code generation and
possibly better code.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <alpine.LFD.2.01.0907021653030.3210@localhost.localdomain>
Signed-off-by: NIngo Molnar <mingo@elte.hu>