There are XCHAL_NUM_TIMERS, reset them all.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NChris Zankel <chris@zankel.net>

Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NChris Zankel <chris@zankel.net>

Add common XTFPGA parts as *.dtsi (base board, flash) and DTS for LX60
and for ML605.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NChris Zankel <chris@zankel.net>

The Avnet LX60/LX110/LX200 board is an FPGA board that can be configured with
an Xtensa processor and an OpenCores Ethernet device.
Signed-off-by: NChris Zankel <chris@zankel.net>
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NChris Zankel <chris@zankel.net>

Device trees allow specification of hardware topology and device
parameters at runtime instead of hard-coding them in platform setup
code. This allows running single binary kernel on a range of compatible
boards.

New boot parameters tag BP_TAG_FDT is allocated and a pointer to flat
device tree is passed in it.

Note that current interrupt mapping scheme uses single cell for
interrupt identification. That means that IRQ numbers used in DTS must
be CPU internal IRQ numbers, not external. It is possible to extend
interrupt identification to two cells, and use second cell to tell
external IRQ numbers form internal. That would allow to use single DTS
on multiple boards with different mapping of external IRQ numbers.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NChris Zankel <chris@zankel.net>

IRQ domains provide a mechanism for conversion of linux IRQ numbers to
hardware IRQ numbers and vice versus. It is used by OpenFirmware for
linking device tree objects to their respective interrupt controllers.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NChris Zankel <chris@zankel.net>

Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NChris Zankel <chris@zankel.net>

- remove duplicate rules for binary and packed image
- use predefined macros for ld/objcopy/gzip
- remove build-id section from bootable elf image
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NChris Zankel <chris@zankel.net>

Define mb and wmb as memw to force memory barrier.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NChris Zankel <chris@zankel.net>

Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NChris Zankel <chris@zankel.net>

Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NChris Zankel <chris@zankel.net>

Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NChris Zankel <chris@zankel.net>

Add a brief sanity test of S32C1I functionality.  This instruction
is needed by the kernel and userland as part of the base ABI
(including GCC atomic builtins, certain threading packages, future
atomic support in the C++ standard, etc).  However, correct operation
of this instruction requires some cooperation by hardware external to
the processor (such as bus bridge, bus fabric, or memory controller).
Minimally exercising this mechanism and reporting explicit status
early in the boot process is helpful to chip vendors using the Linux
kernel as a benchmark of correctness of hardware.

As it turns out, S32C1I is not exercised by the kernel and by uClibc
based userland as of early June 2008.  This is expected to change
soon as both incorporate more recent open source developments.
Signed-off-by: NMarc Gauthier <marc@tensilica.com>
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NChris Zankel <chris@zankel.net>

trap_set_handler sets new C-handler in the exception table and returns
previous handler.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NChris Zankel <chris@zankel.net>

In order to use S32C1I instruction on cores with ATOMCTL SR the register
must be properly initialized.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NChris Zankel <chris@zankel.net>

Although scompare1 may be saved/restored by xchal_ncp_{load,store}
macros, explicit save/restore of registers manipulated by the kernel
itself is considered more correct.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NChris Zankel <chris@zankel.net>

Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NChris Zankel <chris@zankel.net>

Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NChris Zankel <chris@zankel.net>

Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NChris Zankel <chris@zankel.net>

Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NChris Zankel <chris@zankel.net>

This fixes the following allmodconfig build error:

drivers/uio/uio_dmem_genirq.c:95:18: error: 'DMA_ERROR_CODE' undeclared (first use in this function)
drivers/uio/uio_dmem_genirq.c:238:18: error: 'DMA_ERROR_CODE' undeclared (first use in this function)
make[3]: *** [drivers/uio/uio_dmem_genirq.o] Error 1
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NChris Zankel <chris@zankel.net>

This fixes the following build error in allyesconfig:

drivers/tty/serial/8250/8250_early.c: In function 'parse_options':
drivers/tty/serial/8250/8250_early.c:160:18: error: 'BASE_BAUD' undeclared (first use in this function)
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NChris Zankel <chris@zankel.net>

Use ENDPROC() to mark the end of assembler functions.
Signed-off-by: NChris Zankel <chris@zankel.net>

Manually load references to exc_table from the explicit literal in order
to fit DoubleExceptionVector.literals into the available 16-byte gap
before DoubleExceptionVector.text in the absence of link time
relaxation. Without this fix DoubleExceptionVector.literal section
overlaps DoubleExceptionVector.text section in the linked vmlinux image.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NChris Zankel <chris@zankel.net>

The default linker behavior is to optimize identical literal values and
remove unnecessary overhead from assembler-generated "longcall" sequences
to reduce code size. Provide an option to disable this behavior to improve
compile time.
Signed-off-by: NChris Zankel <chris@zankel.net>

Signed-off-by: NNicolas Kaiser <nikai@nikai.net>
Signed-off-by: NChris Zankel <chris@zankel.net>

Fix the definition of the function ccount_read to be compatible
to the member read of the structure clocksource.
Signed-off-by: NWanlong Gao <wanlong.gao@gmail.com>
Signed-off-by: NChris Zankel <chris@zankel.net>

Pull i2c-embedded changes from Wolfram Sang:
 - CBUS driver (an I2C variant)
 - continued rework of the omap driver
 - s3c2410 gets lots of fixes and gains pinctrl support
 - at91 gains DMA support
 - the GPIO muxer gains devicetree probing
 - typical fixes and additions all over

* 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (45 commits)
  i2c: omap: Remove the OMAP_I2C_FLAG_RESET_REGS_POSTIDLE flag
  i2c: at91: add dma support
  i2c: at91: change struct members indentation
  i2c: at91: fix compilation warning
  i2c: mxs: Do not disable the I2C SMBus quick mode
  i2c: mxs: Handle i2c DMA failure properly
  i2c: s3c2410: Remove recently introduced performance overheads
  i2c: ocores: Move grlib set/get functions into #ifdef CONFIG_OF block
  i2c: s3c2410: Add fix for i2c suspend/resume
  i2c: s3c2410: Fix code to free gpios
  i2c: i2c-cbus-gpio: introduce driver
  i2c: ocores: Add support for the GRLIB port of the controller and use function pointers for getreg and setreg functions
  i2c: ocores: Add irq support for sparc
  i2c: omap: Move the remove constraint
  ARM: dts: cfa10049: Add the i2c muxer buses to the CFA-10049
  i2c: s3c2410: do not special case HDMIPHY stuck bus detection
  i2c: s3c2410: use exponential back off while polling for bus idle
  i2c: s3c2410: do not generate STOP for QUIRK_HDMIPHY
  i2c: s3c2410: grab adapter lock while changing i2c clock
  i2c: s3c2410: Add support for pinctrl
  ...

Merge patches from Andrew Morton:
 "Most of the rest of MM, plus a few dribs and drabs.

  I still have quite a few irritating patches left around: ones with
  dubious testing results, lack of review, ones which should have gone
  via maintainer trees but the maintainers are slack, etc.

  I need to be more activist in getting these things wrapped up outside
  the merge window, but they're such a PITA."

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (48 commits)
  mm/vmscan.c: avoid possible deadlock caused by too_many_isolated()
  vmscan: comment too_many_isolated()
  mm/kmemleak.c: remove obsolete simple_strtoul
  mm/memory_hotplug.c: improve comments
  mm/hugetlb: create hugetlb cgroup file in hugetlb_init
  mm/mprotect.c: coding-style cleanups
  Documentation: ABI: /sys/devices/system/node/
  slub: drop mutex before deleting sysfs entry
  memcg: add comments clarifying aspects of cache attribute propagation
  kmem: add slab-specific documentation about the kmem controller
  slub: slub-specific propagation changes
  slab: propagate tunable values
  memcg: aggregate memcg cache values in slabinfo
  memcg/sl[au]b: shrink dead caches
  memcg/sl[au]b: track all the memcg children of a kmem_cache
  memcg: destroy memcg caches
  sl[au]b: allocate objects from memcg cache
  sl[au]b: always get the cache from its page in kmem_cache_free()
  memcg: skip memcg kmem allocations in specified code regions
  memcg: infrastructure to match an allocation to the right cache
  ...

Pull hwmon fixlet from Guenter Roeck:
 "Fix fallout from __devexit removal"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (twl4030-madc-hwmon) Fix warning message caused by removal of __devexit

Pull tile updates from Chris Metcalf:
 "These are a smattering of minor changes from Tilera and other folks,
  mostly in the ptrace area."

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch/tile: set CORE_DUMP_USE_REGSET on tile
  arch/tile: implement arch_ptrace using user_regset on tile
  arch/tile: implement user_regset interface on tile
  arch/tile: clean up tile-specific PTRACE_SETOPTIONS
  arch/tile: provide PT_FLAGS_COMPAT value in pt_regs
  tile/PCI: use for_each_pci_dev to simplify the code
  tilegx: remove __init from pci fixup hook

Neil found that if too_many_isolated() returns true while performing
direct reclaim we can end up waiting for other threads to complete their
direct reclaim.  If those threads are allowed to enter the FS or IO to
free memory, but this thread is not, then it is possible that those
threads will be waiting on this thread and so we get a circular deadlock.

some task enters direct reclaim with GFP_KERNEL
  => too_many_isolated() false
    => vmscan and run into dirty pages
      => pageout()
        => take some FS lock
          => fs/block code does GFP_NOIO allocation
            => enter direct reclaim again
              => too_many_isolated() true
                => waiting for others to progress, however the other
                   tasks may be circular waiting for the FS lock..

The fix is to let !__GFP_IO and !__GFP_FS direct reclaims enjoy higher
priority than normal ones, by lowering the throttle threshold for the
latter.

Allowing ~1/8 isolated pages in normal is large enough.  For example, for
a 1GB LRU list, that's ~128MB isolated pages, or 1k blocked tasks (each
isolates 32 4KB pages), or 64 blocked tasks per logical CPU (assuming 16
logical CPUs per NUMA node).  So it's not likely some CPU goes idle
waiting (when it could make progress) because of this limit: there are
much more sleeping reclaim tasks than the number of CPU, so the task may
well be blocked by some low level queue/lock anyway.

Now !GFP_IOFS reclaims won't be waiting for GFP_IOFS reclaims to progress.
 They will be blocked only when there are too many concurrent !GFP_IOFS
reclaims, however that's very unlikely because the IO-less direct reclaims
is able to progress much more faster, and they won't deadlock each other.
The threshold is raised high enough for them, so that there can be
sufficient parallel progress of !GFP_IOFS reclaims.

[akpm@linux-foundation.org: tweak comment]
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Torsten Kaiser <just.for.lkml@googlemail.com>
Tested-by: NNeilBrown <neilb@suse.de>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: NRik van Riel <riel@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Comment "Why it's doing so" rather than "What it does" as proposed by
Andrew Morton.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Reviewed-by: NRik van Riel <riel@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Replace the obsolete simple_strtoul() with kstrtoul().
Signed-off-by: NAbhijit Pawar <abhi.c.pawar@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Build kernel with CONFIG_HUGETLBFS=y,CONFIG_HUGETLB_PAGE=y and
CONFIG_CGROUP_HUGETLB=y, then specify hugepagesz=xx boot option, system
will fail to boot.

This failure is caused by following code path:

  setup_hugepagesz
    hugetlb_add_hstate
      hugetlb_cgroup_file_init
        cgroup_add_cftypes
          kzalloc <--slab is *not available* yet

For this path, slab is not available yet, so memory allocated will be
failed, and cause WARN_ON() in hugetlb_cgroup_file_init().

So I move hugetlb_cgroup_file_init() into hugetlb_init().

[akpm@linux-foundation.org: tweak coding-style, remove pointless __init on inlined function]
[akpm@linux-foundation.org: fix warning]
Signed-off-by: NJianguo Wu <wujianguo@huawei.com>
Signed-off-by: NJiang Liu <jiang.liu@huawei.com>
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A few gremlins have recently crept in.
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Describe NUMA node sysfs files/attributes.

Note that for the specific dates and contacts I couldn't find,
I left it as default for Oct 2002 and linux-mm.
Signed-off-by: NDavidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Sasha Levin recently reported a lockdep problem resulting from the new
attribute propagation introduced by kmemcg series.  In short, slab_mutex
will be called from within the sysfs attribute store function.  This will
create a dependency, that will later be held backwards when a cache is
destroyed - since destruction occurs with the slab_mutex held, and then
calls in to the sysfs directory removal function.

In this patch, I propose to adopt a strategy close to what
__kmem_cache_create does before calling sysfs_slab_add, and release the
lock before the call to sysfs_slab_remove.  This is pretty much the last
operation in the kmem_cache_shutdown() path, so we could do better by
splitting this and moving this call alone to later on.  This will fit
nicely when sysfs handling is consistent between all caches, but will look
weird now.

Lockdep info:

  ======================================================
  [ INFO: possible circular locking dependency detected ]
  3.7.0-rc4-next-20121106-sasha-00008-g353b62f #117 Tainted: G        W
  -------------------------------------------------------
  trinity-child13/6961 is trying to acquire lock:
   (s_active#43){++++.+}, at:  sysfs_addrm_finish+0x31/0x60

  but task is already holding lock:
   (slab_mutex){+.+.+.}, at:  kmem_cache_destroy+0x22/0xe0

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:
  -> #1 (slab_mutex){+.+.+.}:
          lock_acquire+0x1aa/0x240
          __mutex_lock_common+0x59/0x5a0
          mutex_lock_nested+0x3f/0x50
          slab_attr_store+0xde/0x110
          sysfs_write_file+0xfa/0x150
          vfs_write+0xb0/0x180
          sys_pwrite64+0x60/0xb0
          tracesys+0xe1/0xe6
  -> #0 (s_active#43){++++.+}:
          __lock_acquire+0x14df/0x1ca0
          lock_acquire+0x1aa/0x240
          sysfs_deactivate+0x122/0x1a0
          sysfs_addrm_finish+0x31/0x60
          sysfs_remove_dir+0x89/0xd0
          kobject_del+0x16/0x40
          __kmem_cache_shutdown+0x40/0x60
          kmem_cache_destroy+0x40/0xe0
          mon_text_release+0x78/0xe0
          __fput+0x122/0x2d0
          ____fput+0x9/0x10
          task_work_run+0xbe/0x100
          do_exit+0x432/0xbd0
          do_group_exit+0x84/0xd0
          get_signal_to_deliver+0x81d/0x930
          do_signal+0x3a/0x950
          do_notify_resume+0x3e/0x90
          int_signal+0x12/0x17

  other info that might help us debug this:

   Possible unsafe locking scenario:

         CPU0                    CPU1
         ----                    ----
    lock(slab_mutex);
                                 lock(s_active#43);
                                 lock(slab_mutex);
    lock(s_active#43);

   *** DEADLOCK ***

  2 locks held by trinity-child13/6961:
   #0:  (mon_lock){+.+.+.}, at:  mon_text_release+0x25/0xe0
   #1:  (slab_mutex){+.+.+.}, at:  kmem_cache_destroy+0x22/0xe0

  stack backtrace:
  Pid: 6961, comm: trinity-child13 Tainted: G        W    3.7.0-rc4-next-20121106-sasha-00008-g353b62f #117
  Call Trace:
    print_circular_bug+0x1fb/0x20c
    __lock_acquire+0x14df/0x1ca0
    lock_acquire+0x1aa/0x240
    sysfs_deactivate+0x122/0x1a0
    sysfs_addrm_finish+0x31/0x60
    sysfs_remove_dir+0x89/0xd0
    kobject_del+0x16/0x40
    __kmem_cache_shutdown+0x40/0x60
    kmem_cache_destroy+0x40/0xe0
    mon_text_release+0x78/0xe0
    __fput+0x122/0x2d0
    ____fput+0x9/0x10
    task_work_run+0xbe/0x100
    do_exit+0x432/0xbd0
    do_group_exit+0x84/0xd0
    get_signal_to_deliver+0x81d/0x930
    do_signal+0x3a/0x950
    do_notify_resume+0x3e/0x90
    int_signal+0x12/0x17
Signed-off-by: NGlauber Costa <glommer@parallels.com>
Reported-by: NSasha Levin <sasha.levin@oracle.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Pekka Enberg <penberg@kernel.org>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch clarifies two aspects of cache attribute propagation.

First, the expected context for the for_each_memcg_cache macro in
memcontrol.h.  The usages already in the codebase are safe.  In mm/slub.c,
it is trivially safe because the lock is acquired right before the loop.
In mm/slab.c, it is less so: the lock is acquired by an outer function a
few steps back in the stack, so a VM_BUG_ON() is added to make sure it is
indeed safe.

A comment is also added to detail why we are returning the value of the
parent cache and ignoring the children's when we propagate the attributes.
Signed-off-by: NGlauber Costa <glommer@parallels.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>