- 15 9月, 2010 3 次提交
-
-
由 Steven Rostedt 提交于
The enums for FTRACE_ENABLE_MCOUNT and FTRACE_DISABLE_MCOUNT were used as commands to ftrace_run_update_code(). But these commands were used by the old nasty ftrace daemon that has long been slain. This is a clean up patch to remove the references to these enums and simplify the code a little. Reported-by: NWu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Steven Rostedt 提交于
When the function graph tracer funcgraph-irq option is zero, disable tracing in IRQs. This makes the option have two effects. 1) When reading the trace file, do not display the functions that happen in interrupt context (when detected) 2) [*new*] When recording a trace, skip those that are detected to be in interrupt by the 'in_irq()' function Note, in_irq() is updated at irq_enter() and irq_exit(). There are still functions that are recorded by the function graph tracer that is in interrupt context but outside the irq_enter/exit() routines. Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Jiri Olsa 提交于
It's handy to be able to disable the irq related output and not to have to jump over each irq related code, when you have no interrest in it. The option is by default enabled, so there's no change to current behaviour. It affects only the final output, so all the irq related data stay in the ring buffer. Signed-off-by: NJiri Olsa <jolsa@redhat.com> LKML-Reference: <20100907145344.GC1912@jolsa.brq.redhat.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
- 13 9月, 2010 4 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
They are useless and take away precious columns and lines, so stop using windows. One more step in removing newt code, that after all is not being useful at all for the coalescing TUI model in perf. Suggested-by: NChristoph Hellwig <hch@infradead.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <20100822082003.GB7365@infradead.org> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Peter Zijlstra 提交于
With the context rework stuff we can actually end up freeing an event before it gets attached to a context. Reported-by: NCyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Simplify things and simply synchronize against two RCU variants for PMU unregister -- we don't care about performance, its module unload if anything. Reported-by: NFrederic Weisbecker <fweisbec@gmail.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Stephane Eranian 提交于
Fix a bug introduced with commit de725dec and the change in the meaning of the return value of intel_pmu_handle_irq(). With the current code, when you are using the BTS, you get 'dazed by NMI' each time the BTS buffer fills up. BTS does interrupt on the PMU vector, thus NMI. You need to take this into account in the return value of the function. This version fixes initial patch which was missing changes to perf_event_intel_ds.c. Signed-off-by: NStephane Eranian <eranian@google.com> Acked-by: NDon Zickus <dzickus@redhat.com> Cc: peterz@infradead.org Cc: paulus@samba.org Cc: davem@davemloft.net Cc: fweisbec@gmail.com Cc: perfmon2-devel@lists.sf.net Cc: eranian@gmail.com Cc: robert.richter@amd.com LKML-Reference: <4c8a1686.aae9d80a.5aa4.5e35@mx.google.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 10 9月, 2010 25 次提交
-
-
由 Peter Zijlstra 提交于
We ought to return -ENOENT when non of the registered PMUs recognise the requested event. This fixes a boot crash that occurs if no PMU is available but the NMI watchdog tries to register an event. Reported-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Even though we call it from the inherit path, where the child is not yet accessible, we need to hold ctx->lock, add_event_to_ctx() assumes IRQs are disabled. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Frederic Weisbecker 提交于
asm-generic/hardirq.h needs asm/irq.h which might include linux/interrupt.h as in the sparc 32 case. At this point we need irq_cpustat generic definitions, but those are included later in asm-generic/hardirq.h. Then delay a bit the inclusion of irq.h from asm-generic/hardirq.h, it doesn't need to be included early. This fixes: include/linux/interrupt.h: In function '__raise_softirq_irqoff': include/linux/interrupt.h:414: error: implicit declaration of function 'local_softirq_pending' include/linux/interrupt.h:414: error: lvalue required as left operand of assignment Reported-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Koki Sanagi <sanagi.koki@jp.fujitsu.com> Cc: mathieu.desnoyers@efficios.com Cc: rostedt@goodmis.org Cc: nhorman@tuxdriver.com Cc: scott.a.mcmillan@intel.com Cc: eric.dumazet@gmail.com Cc: kaneshige.kenji@jp.fujitsu.com Cc: davem@davemloft.net Cc: izumi.taku@jp.fujitsu.com Cc: kosaki.motohiro@jp.fujitsu.com LKML-Reference: <20100908122557.GA5310@nowhere> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
I missed a perf_event_ctxp user when converting it to an array. Pull this last user into perf_event.c as well and fix it up. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Assuming we don't mix events of different pmus onto a single context (with the exeption of software events inside a hardware group) we can now assume that all events on a particular context belong to the same pmu, hence we can disable the pmu for the entire context operations. This reduces the amount of hardware writes. The exception for swevents comes from the fact that the sw pmu disable is a nop. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: paulus <paulus@samba.org> Cc: stephane eranian <eranian@googlemail.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Lin Ming <ming.m.lin@intel.com> Cc: Yanmin <yanmin_zhang@linux.intel.com> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Since software events are always schedulable, mixing them up with hardware events (who are not) can lead to funny scheduling oddities. Giving them their own context solves this. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: paulus <paulus@samba.org> Cc: stephane eranian <eranian@googlemail.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Lin Ming <ming.m.lin@intel.com> Cc: Yanmin <yanmin_zhang@linux.intel.com> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Provide the infrastructure for multiple task contexts. A more flexible approach would have resulted in more pointer chases in the scheduling hot-paths. This approach has the limitation of a static number of task contexts. Since I expect most external PMUs to be system wide, or at least node wide (as per the intel uncore unit) they won't actually need a task context. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: paulus <paulus@samba.org> Cc: stephane eranian <eranian@googlemail.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Lin Ming <ming.m.lin@intel.com> Cc: Yanmin <yanmin_zhang@linux.intel.com> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Unify the two perf_event_context allocation sites. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: paulus <paulus@samba.org> Cc: stephane eranian <eranian@googlemail.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Lin Ming <ming.m.lin@intel.com> Cc: Yanmin <yanmin_zhang@linux.intel.com> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Move all inherit code near each other. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: paulus <paulus@samba.org> Cc: stephane eranian <eranian@googlemail.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Lin Ming <ming.m.lin@intel.com> Cc: Yanmin <yanmin_zhang@linux.intel.com> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Allocate per-cpu contexts per pmu. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: paulus <paulus@samba.org> Cc: stephane eranian <eranian@googlemail.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Lin Ming <ming.m.lin@intel.com> Cc: Yanmin <yanmin_zhang@linux.intel.com> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Give each cpu-context its own timer so that it is a self contained entity, this eases the way for per-pmu-per-cpu contexts as well as provides the basic infrastructure to allow different rotation times per pmu. Things to look at: - folding the tick and these TICK_NSEC timers - separate task context rotation Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: paulus <paulus@samba.org> Cc: stephane eranian <eranian@googlemail.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Lin Ming <ming.m.lin@intel.com> Cc: Yanmin <yanmin_zhang@linux.intel.com> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Separate the swevent hash-table from the cpu_context bits in preparation for per pmu cpu contexts. This keeps the swevent hash a global entity. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: paulus <paulus@samba.org> Cc: stephane eranian <eranian@googlemail.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Lin Ming <ming.m.lin@intel.com> Cc: Yanmin <yanmin_zhang@linux.intel.com> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Separate find_get_context() from the event allocation and initialization so that we may make find_get_context() depend on the event pmu in a later patch. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: paulus <paulus@samba.org> Cc: stephane eranian <eranian@googlemail.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Lin Ming <ming.m.lin@intel.com> Cc: Yanmin <yanmin_zhang@linux.intel.com> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Neither the overcommit nor the reservation sysfs parameter were actually working, remove them as they'll only get in the way. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: paulus <paulus@samba.org> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Replace pmu::{enable,disable,start,stop,unthrottle} with pmu::{add,del,start,stop}, all of which take a flags argument. The new interface extends the capability to stop a counter while keeping it scheduled on the PMU. We replace the throttled state with the generic stopped state. This also allows us to efficiently stop/start counters over certain code paths (like IRQ handlers). It also allows scheduling a counter without it starting, allowing for a generic frozen state (useful for rotating stopped counters). The stopped state is implemented in two different ways, depending on how the architecture implemented the throttled state: 1) We disable the counter: a) the pmu has per-counter enable bits, we flip that b) we program a NOP event, preserving the counter state 2) We store the counter state and ignore all read/overflow events Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: paulus <paulus@samba.org> Cc: stephane eranian <eranian@googlemail.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Lin Ming <ming.m.lin@intel.com> Cc: Yanmin <yanmin_zhang@linux.intel.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> Cc: David Miller <davem@davemloft.net> Cc: Michael Cree <mcree@orcon.net.nz> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Use hw_perf_event::period_left instead of hw_perf_event::remaining and win back 8 bytes. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: paulus <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Provide default implementations for the pmu txn methods, this allows us to remove some conditional code. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: paulus <paulus@samba.org> Cc: stephane eranian <eranian@googlemail.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Lin Ming <ming.m.lin@intel.com> Cc: Yanmin <yanmin_zhang@linux.intel.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> Cc: David Miller <davem@davemloft.net> Cc: Michael Cree <mcree@orcon.net.nz> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Changes perf_disable() into perf_pmu_disable(). Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: paulus <paulus@samba.org> Cc: stephane eranian <eranian@googlemail.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Lin Ming <ming.m.lin@intel.com> Cc: Yanmin <yanmin_zhang@linux.intel.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> Cc: David Miller <davem@davemloft.net> Cc: Michael Cree <mcree@orcon.net.nz> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Since the current perf_disable() usage is only an optimization, remove it for now. This eases the removal of the __weak hw_perf_enable() interface. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: paulus <paulus@samba.org> Cc: stephane eranian <eranian@googlemail.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Lin Ming <ming.m.lin@intel.com> Cc: Yanmin <yanmin_zhang@linux.intel.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> Cc: David Miller <davem@davemloft.net> Cc: Michael Cree <mcree@orcon.net.nz> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Fixup random annoying style bits. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: paulus <paulus@samba.org> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Simple registration interface for struct pmu, this provides the infrastructure for removing all the weak functions. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: paulus <paulus@samba.org> Cc: stephane eranian <eranian@googlemail.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Lin Ming <ming.m.lin@intel.com> Cc: Yanmin <yanmin_zhang@linux.intel.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> Cc: David Miller <davem@davemloft.net> Cc: Michael Cree <mcree@orcon.net.nz> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
sed -ie 's/const struct pmu\>/struct pmu/g' `git grep -l "const struct pmu\>"` Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: paulus <paulus@samba.org> Cc: stephane eranian <eranian@googlemail.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Lin Ming <ming.m.lin@intel.com> Cc: Yanmin <yanmin_zhang@linux.intel.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> Cc: David Miller <davem@davemloft.net> Cc: Michael Cree <mcree@orcon.net.nz> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Merge reason: Pick up pending fixes before applying dependent new changes. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Since we have UP_PREPARE, we should also have UP_CANCELED. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: paulus <paulus@samba.org> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Li Zefan 提交于
Commit 1c024eca (perf, trace: Optimize tracepoints by using per-tracepoint-per-cpu hlist to track events) caused a module refcount leak. Reported-And-Tested-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4C7E1F12.8030304@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 08 9月, 2010 5 次提交
-
-
由 Masami Hiramatsu 提交于
Check the argument name whether it is invalid (not C-like symbol name). This makes event format simple. Reported-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> LKML-Reference: <20100827113912.22882.62313.stgit@ltc236.sdl.hitachi.co.jp> Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Masami Hiramatsu 提交于
Set "argN" name for each argument automatically if it has no specified name. Since dynamic trace event(kprobe_events) accepts special characters for its argument, its format can show those special characters (e.g. '$', '%', '+'). However, perf can't parse those format because of the character (especially '%') mess up the format. This sets "argX" name for those arguments if user omitted the argument names. E.g. # echo 'p do_fork %ax IP=%ip $stack' > tracing/kprobe_events # cat tracing/kprobe_events p:kprobes/p_do_fork_0 do_fork arg1=%ax IP=%ip arg3=$stack Reported-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> LKML-Reference: <20100827113906.22882.59312.stgit@ltc236.sdl.hitachi.co.jp> Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Masami Hiramatsu 提交于
Don't make argument names from raw parameters (means the parameters are written in kprobe-tracer syntax), because the argument syntax may include special characters. Just leave it, then kprobe-tracer gives a new name. Reported-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100827113859.22882.75598.stgit@ltc236.sdl.hitachi.co.jp> Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Masami Hiramatsu 提交于
Fix a bug to support %return probe syntax again. Previous commit 4235b045 has a bug which disables the %return syntax on perf probe. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100827113852.22882.87447.stgit@ltc236.sdl.hitachi.co.jp> Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Masami Hiramatsu 提交于
Fix a memory leak which happens when a field name conflicts with others. In error case, free_trace_probe() will free all arguments until nr_args, so this increments nr_args the begining of the loop instead of the end. Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> LKML-Reference: <20100827113846.22882.12670.stgit@ltc236.sdl.hitachi.co.jp> Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 09 9月, 2010 1 次提交
-
-
由 Steven Rostedt 提交于
Reading the file set_ftrace_filter does three things. 1) shows whether or not filters are set for the function tracer 2) shows what functions are set for the function tracer 3) shows what triggers are set on any functions 3 is independent from 1 and 2. The way this file currently works is that it is a state machine, and as you read it, it may change state. But this assumption breaks when you use lseek() on the file. The state machine gets out of sync and the t_show() may use the wrong pointer and cause a kernel oops. Luckily, this will only kill the app that does the lseek, but the app dies while holding a mutex. This prevents anyone else from using the set_ftrace_filter file (or any other function tracing file for that matter). A real fix for this is to rewrite the code, but that is too much for a -rc release or stable. This patch simply disables llseek on the set_ftrace_filter() file for now, and we can do the proper fix for the next major release. Reported-by: NRobert Swiecki <swiecki@google.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Tavis Ormandy <taviso@google.com> Cc: Eugene Teo <eugene@redhat.com> Cc: vendor-sec@lst.de Cc: <stable@kernel.org> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
- 08 9月, 2010 1 次提交
-
-
由 Koki Sanagi 提交于
Add a perf script which shows packets processing and processed time. It helps us to investigate networking or network devices. If you want to use it, install perf and record perf.data like following. If you set script, perf gathers records until it ends. If not, you must Ctrl-C to stop recording. And if you want a report from record, If you use some options, you can limit the output. Option is below. tx: show only tx packets processing rx: show only rx packets processing dev=: show processing on this device debug: work with debug mode. It shows buffer status. For example, if you want to show received packets processing associated with eth4, 106133.171439sec cpu=0 irq_entry(+0.000msec irq=24:eth4) | softirq_entry(+0.006msec) | |---netif_receive_skb(+0.010msec skb=f2d15900 len=100) | | | skb_copy_datagram_iovec(+0.039msec 10291::10291) | napi_poll_exit(+0.022msec eth4) This perf script helps us to analyze the processing time of a transmit/receive sequence. Signed-off-by: NKoki Sanagi <sanagi.koki@jp.fujitsu.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Kaneshige Kenji <kaneshige.kenji@jp.fujitsu.com> Cc: Izumo Taku <izumi.taku@jp.fujitsu.com> Cc: Kosaki Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Scott Mcmillan <scott.a.mcmillan@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <4C72439D.3040001@jp.fujitsu.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
- 07 9月, 2010 1 次提交
-
-
由 Koki Sanagi 提交于
This patch adds tracepoint to consume_skb and add trace_kfree_skb before __kfree_skb in skb_free_datagram_locked and net_tx_action. Combinating with tracepoint on dev_hard_start_xmit, we can check how long it takes to free transmitted packets. And using it, we can calculate how many packets driver had at that time. It is useful when a drop of transmitted packet is a problem. sshd-6828 [000] 112689.258154: consume_skb: skbaddr=f2d99bb8 Signed-off-by: NKoki Sanagi <sanagi.koki@jp.fujitsu.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Kaneshige Kenji <kaneshige.kenji@jp.fujitsu.com> Cc: Izumo Taku <izumi.taku@jp.fujitsu.com> Cc: Kosaki Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Scott Mcmillan <scott.a.mcmillan@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> LKML-Reference: <4C724364.50903@jp.fujitsu.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-