If the event has no timestamp assigned then the parse code sets it to
~0ULL which causes the ordering code to enqueue it at the end.

Process it right away.
Reported-by: NIan Munsie <imunsie@au1.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20101207124550.528788441@linutronix.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

event__name[] is missing an entry for PERF_RECORD_FINISHED_ROUND, but we
happily access the array from the dump code.

Make event__name[] static and provide an accessor function, fix up all
callers and add the missing string.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20101207124550.432593943@linutronix.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This is useful for analyzing a perf data file on a different system than
the one data was collected on and still include symbols from loaded
kernel modules in the output.

Commiter note: Updated the man page accordingly.

LKML-Reference: <1291775986-16475-1-git-send-email-daahern@cisco.com>
Signed-off-by: NDavid Ahern <daahern@cisco.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

arch/x86/kernel/apic/hw_nmi.c:29: warning: backtrace_mask defined but not used

commit 0e2af2a9(x86, hw_nmi: Move backtrace_mask declaration under
ARCH_HAS_NMI_WATCHDOG) addressed this warning, but it was reintroduced
by commit 5f2b0ba4(x86, nmi_watchdog: Remove the old nmi_watchdog).

Move backtrace_mask into the #ifdef arch_trigger_all_cpu_backtrace
section again.
Signed-off-by: NRakib Mullick <rakib.mullick@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <AANLkTi=rcc38QzoKa6LFy4m++-p_9=Zt4_kDQE=GeKxf@mail.gmail.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Use the reboot notifier to detach all running counters on reboot, this
solves a problem with kexec where the new kernel doesn't expect
running counters (rightly so).

It will however decrease the coverage of the NMI watchdog. Making a
kexec specific reboot notifier callback would be best, however that
would require touching all notifier callback handlers as they are not
properly structured to deal with new state.

As a compromise, place the perf reboot notifier at the very last
position in the list.
Reported-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Don Zickus <dzickus@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Since all the hotplug stuff is serialized by the hotplug mutex,
do away with the amd_nb_lock.

Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

When we build perf we place all of the .o files from the library files
(util, arch/x/util, etc) into libperf.a which is then linked into perf.

The problem is that the linker will by default only consider .o files
within the .a archive if they are necessary to satisfy an unresolved
symbol. As weak functions are not unresolved, it will not consider a .o
file from the archive containing the strong versions of weak functions
unless it requires it for another reason.

This patch adds the --whole-archive flags to the linker when passing in
the libperf.a file to ensure that it will consider every .o file in the
archive, not just what it believes that it needs. The end result is that
weak functions can now be overridden by strong variants of them in the
libperf.a file.

Cc: "tom.leiming" <tom.leiming@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1290991642-sup-5890@au1.ibm.com>
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Merge branch 'perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/core

Merge reason: Pick up the latest -rc.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
  ocfs2_connection_find() returns pointer to bad structure
  ocfs2: char is not always signed
  Ocfs2: Stop tracking a negative dentry after dentry_iput().
  ocfs2: fix memory leak
  fs/ocfs2/dlm: Use GFP_ATOMIC under spin_lock

Commit 0ea12930 ("arm: return both physical and virtual addresses
from addruart") took out the test for MMU on/off but didn't switch the
ldr instructions to no longer be conditionals based on said test.

Fix that.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Acked-by: NColin Cross <ccross@android.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM / Hibernate: Fix memory corruption related to swap
  PM / Hibernate: Use async I/O when reading compressed hibernation image

There is a problem that swap pages allocated before the creation of
a hibernation image can be released and used for storing the contents
of different memory pages while the image is being saved.  Since the
kernel stored in the image doesn't know of that, it causes memory
corruption to occur after resume from hibernation, especially on
systems with relatively small RAM that need to swap often.

This issue can be addressed by keeping the GFP_IOFS bits clear
in gfp_allowed_mask during the entire hibernation, including the
saving of the image, until the system is finally turned off or
the hibernation is aborted.  Unfortunately, for this purpose
it's necessary to rework the way in which the hibernate and
suspend code manipulates gfp_allowed_mask.

This change is based on an earlier patch from Hugh Dickins.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Reported-by: NOndrej Zary <linux@rainbow-software.org>
Acked-by: NHugh Dickins <hughd@google.com>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: stable@kernel.org

* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6524/1: GIC irq desciptor bug fix
  ARM: 6523/1: iop: ensure sched_clock() is notrace
  ARM: 6456/1: Fix for building DEBUG with sa11xx_base.c as a module.
  ARM: 6519/1: kuser: Fix incorrect cmpxchg syscall in kuser helpers
  ARM: 6505/1: kprobes: Don't HAVE_KPROBES when CONFIG_THUMB2_KERNEL is selected
  ARM: 6508/1: vexpress: Correct data alignment in headsmp.S for CONFIG_THUMB2_KERNEL
  ARM: 6507/1: RealView: Correct data alignment in headsmp.S for CONFIG_THUMB2_KERNEL
  ARM: 6504/1: Thumb-2: Fix long-distance conditional branches in head.S for Thumb-2.
  ARM: 6503/1: Thumb-2: Restore sensible zImage header layout for CONFIG_THUMB2_KERNEL
  ARM: 6502/1: Thumb-2: Fix CONFIG_THUMB2_KERNEL breakage in compressed/head.S
  ARM: 6501/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in mm/proc-v7.S
  ARM: 6500/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in kernel/head.S
  ARM: 6499/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in bootp/init.S
  ARM: 6498/1: vfp: Correct data alignment for CONFIG_THUMB2_KERNEL
  ARM: 6497/1: kexec: Correct data alignment for CONFIG_THUMB2_KERNEL
  ARM: 6496/1: GIC: Do not try to register more then NR_IRQS interrupts
  ARM: cns3xxx: Fix build with CONFIG_PCI=y

This is a fix for reading LZO compressed image using async I/O.
Essentially, instead of having just one page into which we keep
reading blocks from swap, we allocate enough of them to cover the
largest compressed size and then let block I/O pick them all up. Once
we have them all (and here we wait), we decompress them, as usual.
Obviously, the very first block we still pick up synchronously,
because we need to know the size of the lot before we pick up the
rest.

Also fixed the copyright line, which I've forgotten before.
Signed-off-by: NBojan Smojver <bojan@rexursive.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Use text_poke_smp_batch() on unoptimization path for reducing
the number of stop_machine() issues. If the number of
unoptimizing probes is more than MAX_OPTIMIZE_PROBES(=256),
kprobes unoptimizes first MAX_OPTIMIZE_PROBES probes and kicks
optimizer for remaining probes.
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20101203095434.2961.22657.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Use text_poke_smp_batch() in optimization path for reducing
the number of stop_machine() issues. If the number of optimizing
probes is more than MAX_OPTIMIZE_PROBES(=256), kprobes optimizes
first MAX_OPTIMIZE_PROBES probes and kicks optimizer for
remaining probes.

Changes in v5:
- Use kick_kprobe_optimizer() instead of directly calling
  schedule_delayed_work().
- Rescheduling optimizer outside of kprobe mutex lock.

Changes in v2:
- Allocate code buffer and parameters in arch_init_kprobes()
  instead of using static arraies.
- Merge previous max optimization limit patch into this patch.
  So, this patch introduces upper limit of optimization at
  once.
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20101203095428.2961.8994.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Introduce text_poke_smp_batch(). This function modifies several
text areas with one stop_machine() on SMP. Because calling
stop_machine() is heavy task, it is better to aggregate
text_poke requests.

( Note: I've talked with Rusty about this interface, and
  he would not like to expand stop_machine() interface, since
  it is not for generic use. )
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Jan Beulich <jbeulich@novell.com>
Cc: 2nddept-manager@sdl.hitachi.co.jp
LKML-Reference: <20101203095422.2961.51217.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Reuse unused (waiting for unoptimizing and no user handler)
kprobe on given address instead of returning -EBUSY for
registering a new kprobe.
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: 2nddept-manager@sdl.hitachi.co.jp
LKML-Reference: <20101203095416.2961.39080.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Unoptimization occurs when a probe is unregistered or disabled,
and is heavy because it recovers instructions by using
stop_machine(). This patch delays unoptimization operations and
unoptimize several probes at once by using
text_poke_smp_batch(). This can avoid unexpected system slowdown
coming from stop_machine().

Changes in v5:
- Split this patch into several cleanup patches and this patch.
- Fix some text_mutex lock miss.
- Use bool instead of int for behavior flags.
- Add additional comment for (un)optimizing path.

Changes in v2:
- Use dynamic allocated buffers and params.
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: 2nddept-manager@sdl.hitachi.co.jp
LKML-Reference: <20101203095409.2961.82733.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Separate kprobe optimizing code from optimizer, this
will make easy to introducing unoptimizing code in
optimizer.
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: 2nddept-manager@sdl.hitachi.co.jp
LKML-Reference: <20101203095403.2961.91201.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Merge disabling kprobe to unregistering kprobe function
and add comments for disabing/unregistring process.

Current unregistering code disables(disarms) kprobes after
checking target kprobe status. This patch changes it to
disabling kprobe first after that it changing the kprobe's
state. This allows to share probe disabling code between
disable_kprobe() and unregister_kprobe().
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: 2nddept-manager@sdl.hitachi.co.jp
LKML-Reference: <20101203095356.2961.30152.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Rename irrelevant uses of "old_p" to more appropriate names.
Originally, "old_p" just meant "the old kprobe on given address"
but current code uses that name as "just another kprobe" or
something like that. This patch renames those pointer names
to more appropriate one for maintainability.
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: 2nddept-manager@sdl.hitachi.co.jp
LKML-Reference: <20101203095350.2961.48110.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

There were a few stray calloc()'s and malloc()'s which were not having
their return values checked for success.

As the calling code either already coped with failure or didn't actually
care we just return -ENOMEM at that point.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NChris Samuel <chris@csamuel.org>
LKML-Reference: <4CDDF95A.1050400@csamuel.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Fix annoying compiler warning in the is_top_script() function.

The issue was that a const char * was cast into a char * to call
ends_with(). We fix the users of ends_with() instead. Some are passing a
char *, but it is okay to cast the return value of ends_with() to char *
(because we understand what ends_with() does).

Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@gmail.com>
LKML-Reference: <4cf92096.17edd80a.1540.5d60@mx.google.com>
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Now that we have timestamps on FORK, EXIT, COMM, MMAP events we can
sort everything in time order. This fixes the following observed
problem:

mmap(file1) -> pagefault() -> munmap(file1)
mmap(file2) -> pagefault() -> munmap(file2)

Resulted in decoding both pagefaults in file2 because the file1 map
was already replaced by the file2 map when the map address was
identical.

With all events sorted we decode both pagefaults correctly.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <alpine.LFD.2.00.1012051220450.2653@localhost6.localdomain6>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add new macro OPT_CALLBACK_DEFAULT_NOOPT for parse_options.

It enables to pass the default value (opt->defval) to the callback function
processing options require no argument.
Reviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20101203035853.7827.17502.stgit@localhost6.localdomain6>
Signed-off-by: NAkihiro Nagai <akihiro.nagai.hw@hitachi.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

In the event that a DSO has not been identified, just print out [unknown]
instead of the instruction pointer as we previously were doing, which is pretty
meaningless for a shared object (at least to the users perspective).

The IP we print out is fairly meaningless in general anyway - it's just one
(the first) of the many addresses that were lumped together as unidentified,
and could span many shared objects and symbols. In reality if we see this
[unknown] output then the report -D output is going to be more useful anyway as
we can see all the different address that it represents.

If we are printing the symbols we are still going to see this IP in that column
anyway since they shouldn't resolve either.

This patch also changes the symbol address printouts so that they print out 0x
before the address, are left aligned, and changes the %L format string (which
relies on a glibc bug) to %ll.

Before:
    74.11%    :3259               4a6c  [k]     4a6c
After:
    74.11%    :3259  [unknown]          [k] 0x4a6c

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1291603026-11785-2-git-send-email-imunsie@au1.ibm.com>
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

gic_set_cpu will directly use irq_desc[]. If CONFIG_SPARSE_IRQ is
enabled, there is no irq_desc[]. So we need use irq_to_desc(irq) to
get the descriptor for irq.
Signed-off-by: NChao Xie <chao.xie@marvell.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

* 'slab/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  slub: Fix a crash during slabinfo -v

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  initramfs: Really fix build break on symbol-prefixed archs
  [media] Fix Kconfig errors due to two visible menus
  i2c/algos: convert Kconfig to use the menu's `visible' keyword
  media/video: convert Kconfig to use the menu's `visible' keyword
  Revert "i2c: Fix Kconfig dependencies"
  kconfig: regen parser
  kconfig: add an option to determine a menu's visibility

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6:
  parisc: Fix GSC PS/2 driver name for keyboard and mouse
  parisc: KittyHawk LCD fix
  parisc: convert the rest of the irq handlers to simple/percpu
  parisc: fix dino/gsc interrupts
  parisc: remove redundant initialization in sigsegv path of sys_rt_sigreturn

Because it caused a chroot ttyname regression in 2.6.36.

As of 2.6.36 ttyname does not work in a chroot.  It has already been
reported that screen breaks, and for me this breaks an automated
distribution testsuite, that I need to preserve the ability to run the
existing binaries on for several more years.  glibc 2.11.3 which has a
fix for this is not an option.

The root cause of this breakage is:

    commit 8df9d1a4
    Author: Miklos Szeredi <mszeredi@suse.cz>
    Date:   Tue Aug 10 11:41:41 2010 +0200

    vfs: show unreachable paths in getcwd and proc

    Prepend "(unreachable)" to path strings if the path is not reachable
    from the current root.

    Two places updated are
     - the return string from getcwd()
     - and symlinks under /proc/$PID.

    Other uses of d_path() are left unchanged (we know that some old
    software crashes if /proc/mounts is changed).
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

So remove the nice sounding, but ultimately ill advised change to how
/proc/fd symlinks work.
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

So that we can use -T == --timestamp, asking for PERF_SAMPLE_TIME:

  $ perf record -aT
  $ perf report -D | grep PERF_RECORD_
  <SNIP>
   3   5951915425 0x47530 [0x58]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff8138c1a2 period: 215979 cpu:3
   3   5952026879 0x47588 [0x90]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff810cb480 period: 215979 cpu:3
   3   5952059959 0x47618 [0x38]: PERF_RECORD_FORK(6853:6853):(16811:16811)
   3   5952138878 0x47650 [0x78]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff811bac35 period: 431478 cpu:3
   3   5952375068 0x476c8 [0x30]: PERF_RECORD_COMM: find:6853
   3   5952395923 0x476f8 [0x50]: PERF_RECORD_MMAP 6853/6853: [0x400000(0x25000) @ 0]: /usr/bin/find
   3   5952413756 0x47748 [0xa0]: PERF_RECORD_SAMPLE(IP, 1): 6853/6853: 0xffffffff810d080f period: 859332 cpu:3
   3   5952419837 0x477e8 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44600000(0x21d000) @ 0]: /lib64/ld-2.5.so
   3   5952437929 0x47840 [0x48]: PERF_RECORD_MMAP 6853/6853: [0x7fff7e1c9000(0x1000) @ 0x7fff7e1c9000]: [vdso]
   3   5952570127 0x47888 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f46200000(0x218000) @ 0]: /lib64/libselinux.so.1
   3   5952623637 0x478e0 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44a00000(0x356000) @ 0]: /lib64/libc-2.5.so
   3   5952675720 0x47938 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44e00000(0x204000) @ 0]: /lib64/libdl-2.5.so
   3   5952710080 0x47990 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f45a00000(0x246000) @ 0]: /lib64/libsepol.so.1
   3   5952847802 0x479e8 [0x58]: PERF_RECORD_SAMPLE(IP, 1): 6853/6853: 0xffffffff813897f0 period: 1142536 cpu:3
  <SNIP>

First column is the cpu and the second the timestamp.

That way we can investigate problems in the event stream.

If the new perf binary is run on an older kernel, it will disable this feature
automatically.
Tested-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NIan Munsie <imunsie@au1.ibm.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1291318772-30880-5-git-send-email-acme@infradead.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

At perf_session__process_event, so that we reduce the number of lines in eache
tool sample processing routine that now receives a sample_data pointer already
parsed.

This will also be useful in the next patch, where we'll allow sample the
identity fields in MMAP, FORK, EXIT, etc, when it will be possible to see (cpu,
timestamp) just after before every event.

Also validate callchains in perf_session__process_event, i.e. as early as
possible, and keep a counter of the number of events discarded due to invalid
callchains, warning the user about it if it happens.

There is an assumption that was kept that all events have the same sample_type,
that will be dealt with in the future, when this preexisting limitation will be
removed.
Tested-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NIan Munsie <imunsie@au1.ibm.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1291318772-30880-4-git-send-email-acme@infradead.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

If perf_event_attr.sample_id_all is set it will add the PERF_SAMPLE_ identity
info:

TID, TIME, ID, CPU, STREAM_ID

As a trailer, so that older perf tools can process new files, just ignoring the
extra payload.

With this its possible to do further analysis on problems in the event stream,
like detecting reordering of MMAP and FORK events, etc.

V2: Fixup header size in comm, mmap and task processing, as we have to take into
account different sample_types for each matching event, noticed by Thomas Gleixner.

Thomas also noticed a problem in v2 where if we didn't had space in the buffer we
wouldn't restore the header size.
Tested-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NIan Munsie <imunsie@au1.ibm.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Those will be made available in sample like events like MMAP, EXEC, etc in a
followup patch. So precalculate the extra id header space and have a separate
routine to fill them up.

V2: Thomas noticed that the id header needs to be precalculated at
inherit_events too:

LKML-Reference: <alpine.LFD.2.00.1012031245220.2653@localhost6.localdomain6>
Tested-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NIan Munsie <imunsie@au1.ibm.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1291318772-30880-2-git-send-email-acme@infradead.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The precalculated header size is not updated when an event is inherited. That
results in bogus sample entries for all child events. Bug introduced in c320c7b7.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <alpine.LFD.2.00.1012031245220.2653@localhost6.localdomain6>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>