The delalloc lock doesn't need to have irqs disabled, nobody that
changes the number of delalloc bytes in the FS is running with irqs off.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The compression code was using isize to limit the amount of data it
sent through zlib.  But, it wasn't properly limiting the looping to
just the pages inside i_size.  The end result was trying to compress
too many pages, including those that had not been setup and properly locked
down.  This made the compression code oops while trying find_get_page on a
page that didn't exist.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Checksums on data can be disabled by mount option, so it's
possible some data extents don't have checksums or have
invalid checksums. This causes trouble for data relocation.
This patch contains following things to make data relocation
work.

1) make nodatasum/nodatacow mount option only affects new
files. Checksums and COW on data are only controlled by the
inode flags.

2) check the existence of checksum in the nodatacow checker.
If checksums exist, force COW the data extent. This ensure that
checksum for a given block is either valid or does not exist.

3) update data relocation code to properly handle the case
of checksum missing.
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>

This patch makes seed device possible to be shared by
multiple mounted file systems. The sharing is achieved
by cloning seed device's btrfs_fs_devices structure.
Thanks you,
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>

The block group structs are referenced in many different
places, and it's not safe to free while balancing.  So, those block
group structs were simply leaked instead.

This patch replaces the block group pointer in the inode with the starting byte
offset of the block group and adds reference counting to the block group
struct.
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>

Add missing mnt_drop_write to match the mnt_want_write in
btrfs_ioctl_trans_start.
Signed-off-by: NSage Weil <sage@newdream.net>

This updates the space balancing code for the
new checksum format.
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>

This finishes off the new checksumming code by removing csum items
for extents that are no longer in use.

The trick is doing it without racing because a single csum item may
hold csums for more than one extent.  Extra checks are added to
btrfs_csum_file_blocks to make sure that we are using the correct
csum item after dropping locks.

A new btrfs_split_item is added to split a single csum item so it
can be split without dropping the leaf lock.  This is used to
remove csum bytes from the middle of an item.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The fsync logging code makes sure to onl copy the relevant checksum for each
extent based on the file extent pointers it finds.

But for compressed extents, it needs to copy the checksum for the
entire extent.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This adds a sequence number to the btrfs inode that is increased on
every update.  NFS will be able to use that to detect when an inode has
changed, without relying on inaccurate time fields.

While we're here, this also:

Puts reserved space into the super block and inode

Adds a log root transid to the super so we can pick the newest super
based on the fsync log as well as the main transaction ID.  For now
the log root transid is always zero, but that'll get fixed.

Adds a starting offset to the dev_item.  This will let us do better
alignment calculations if we know the start of a partition on the disk.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

It is possible that generic_bin_search will be called on a tree block
that has not been locked.  This happens because cache_block_block skips
locking on the tree blocks.

Since the tree block isn't locked, we aren't allowed to change
the extent_buffer->map_token field.  Using map_private_extent_buffer
avoids any changes to the internal extent buffer fields.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This patch implements superblock duplication. Superblocks
are stored at offset 16K, 64M and 256G on every devices.
Spaces used by superblocks are preserved by the allocator,
which uses a reverse mapping function to find the logical
addresses that correspond to superblocks. Thank you,
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>

Btrfs stores checksums for each data block.  Until now, they have
been stored in the subvolume trees, indexed by the inode that is
referencing the data block.  This means that when we read the inode,
we've probably read in at least some checksums as well.

But, this has a few problems:

* The checksums are indexed by logical offset in the file.  When
compression is on, this means we have to do the expensive checksumming
on the uncompressed data.  It would be faster if we could checksum
the compressed data instead.

* If we implement encryption, we'll be checksumming the plain text and
storing that on disk.  This is significantly less secure.

* For either compression or encryption, we have to get the plain text
back before we can verify the checksum as correct.  This makes the raid
layer balancing and extent moving much more expensive.

* It makes the front end caching code more complex, as we have touch
the subvolume and inodes as we cache extents.

* There is potentitally one copy of the checksum in each subvolume
referencing an extent.

The solution used here is to store the extent checksums in a dedicated
tree.  This allows us to index the checksums by phyiscal extent
start and length.  It means:

* The checksum is against the data stored on disk, after any compression
or encryption is done.

* The checksum is stored in a central location, and can be verified without
following back references, or reading inodes.

This makes compression significantly faster by reducing the amount of
data that needs to be checksummed.  It will also allow much faster
raid management code in general.

The checksums are indexed by a key with a fixed objectid (a magic value
in ctree.h) and offset set to the starting byte of the extent.  This
allows us to copy the checksum items into the fsync log tree directly (or
any other tree), without having to invent a second format for them.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The btrfs macros to access individual struct members on disk were
sending the same variable to functions that expected different types
of endianness.  This fix explicitly creates a variable of the correct
type instead of abusing a single variable for mixed purposes.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Snapshot and subvolume creation no longer need this helper.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This patch gives us the space we will need in order to have different csum
algorithims at some point in the future.  We save the csum algorithim type
in the superblock, and use those instead of define's.
Signed-off-by: NJosef Bacik <jbacik@redhat.com>

This needs to be applied on top of my previous patches, but is needed for more
than just my new stuff.  We're going to the wrong label when we have an error,
we try to stop the workers, but they are started below all of this code.  This
fixes it so we go to the right error label and not panic when we fail one of
these cases.
Signed-off-by: NJosef Bacik <jbacik@redhat.com>

This adds the necessary disk format for handling compatibility flags
in the future to handle disk format changes.  We have a compat_flags,
compat_ro_flags and incompat_flags set for the super block.  Compat
flags will be to hold the features that are compatible with older
versions of btrfs, compat_ro flags have features that are compatible
with older versions of btrfs if the fs is mounted read only, and
incompat_flags has features that are incompatible with older versions
of btrfs.  This also axes the compat_flags field for the inode and
just makes the flags field a 64bit field, and changes the root item
flags field to 64bit.
Signed-off-by: NJosef Bacik <jbacik@redhat.com>

Cleans the code up a little and also avoids a sparse warning due to the
incorrect cast in the current version of the code.
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Provide a void __user *argp pointer so that we can avoid duplicating
the cast for various sub-command calls.
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Make sure to propagate fmode_t properly and use the right constants for
it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Shut up various sparse warnings about symbols that should be either
static or have their declarations in scope.
Signed-off-by: NChristoph Hellwig <hch@lst.de>

It is called by btrfs_sync_fs.
Signed-off-by: NSage Weil <sage@newdream.net>

Remove unneeded debugging sanity check.  It gets corrupted anyway when
multiple btrfs file systems are mounted, throwing bad warnings along the
way.
Signed-off-by: NSage Weil <sage@newdream.net>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

The file preallocation code reversed the logic to force nodatacow.
This fixes it.

This the lockdep complaint by having a different mutex to gaurd caching the
block group, so you don't end up with this backwards dependancy.  Thank you,
Signed-off-by: NJosef Bacik <jbacik@redhat.com>

The btrfs write_cache_pages call has a flush function so that it submits
the bio it has been building before it waits on any writeback pages.

This adds a check so that flush only happens on writeback pages.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The file preallocation code reversed the logic to force nodatacow.  This
fixes it.

The log replay produces dirty roots. These dirty roots
should be dropped immediately if the fs is mounted as
ro. Otherwise they can be added to the dirty root list
again when remounting the fs as rw. Thank you,
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>

The btrfs git kernel trees is used to build a standalone tree for
compiling against older kernels.  This commit makes the standalone tree
work with 2.6.27
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This fixes compile problems with linux-next
Signed-off-by: NChris Mason <chris.mason@oracle.com>

* open/close_bdev_excl -> open/close_bdev_exclusive
* blkdev_issue_discard takes a GFP mask now
* Fix blkdev_issue_discard usage now that it is enabled
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This patch fixes what I hope is the last early ENOSPC bug left.  I did not know
that pinned extents would merge into one big extent when inserted on to the
pinned extent tree, so I was adding free space to a block group that could
possibly span multiple block groups.

This is a big issue because first that space doesn't exist in that block group,
and second we won't actually use that space because there are a bunch of other
checks to make sure we're allocating within the constraints of the block group.

This patch fixes the problem by adding the btrfs_add_free_space to
btrfs_update_pinned_extents which makes sure we are adding the appropriate
amount of free space to the appropriate block group.  Thanks much to Lee Trager
for running my myriad of debug patches to help me track this problem down.
Thank you,
Signed-off-by: NJosef Bacik <jbacik@redhat.com>

fsync log replay can change the filesystem, so it cannot be delayed until
mount -o rw,remount, and it can't be forgotten entirely.  So, this patch
changes btrfs to do with reiserfs, ext3 and xfs do, which is to do the
log replay even when mounted readonly.

On a readonly device if log replay is required, the mount is aborted.

Getting all of this right had required fixing up some of the error
handling in open_ctree.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

While building large bios in writepages, btrfs may end up waiting
for other page writeback to finish if WB_SYNC_ALL is used.

While it is waiting, the bio it is building has a number of pages with the
writeback bit set and they aren't getting to the disk any time soon.  This
lowers the latencies of writeback in general by sending down the bio being
built before waiting for other pages.

The bio submission code tries to limit the total number of async bios in
flight by waiting when we're over a certain number of async bios.  But,
the waits are happening while writepages is building bios, and this can easily
lead to stalls and other problems for people calling wait_on_page_writeback.

The current fix is to let the congestion tests take care of waiting.

sync() and others make sure to drain the current async requests to make
sure that everything that was pending when the sync was started really get
to disk.  The code would drain pending requests both before and after
submitting a new request.

But, if one of the requests is waiting for page writeback to finish,
the draining waits might block that page writeback.  This changes the
draining code to only wait after submitting the bio being processed.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The extent based waiting was using more CPU, and other fixes have helped
with the unplug storm problems.
Signed-off-by: NChris Mason <chris.mason@oracle.com>