- 02 4月, 2013 3 次提交
-
-
由 Viresh Kumar 提交于
It is not possible for init() to be called for any cpu other than cpu0. During bootup whatever cpu is used to boot system will be assigned as cpu0. And later on policy->cpu can only change if we hotunplug all cpus first and then hotplug them back in different order, which isn't possible (system requires atleast one cpu to be up always :)). Though I can see one situation where policy->cpu can be different then zero. - Hot-unplug cpu 0. - rmmod cpufreq-cpu0 module - insmod it back - hotplug cpu 0 again. Here, policy->cpu would be different. But the driver doesn't have any dependency on cpu0 as such. We don't mind which cpu of a system is policy->cpu and so this check is just not required. Remove it. Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org> Acked-by: NShawn Guo <shawn.guo@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Viresh Kumar 提交于
At few places in documentation cpufreq_frequency_table is written as cpufreq_freq_table. Fix these. Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Viresh Kumar 提交于
"clock-latency" is incorrectly written as "transition-latency" in an example present in Documentation of cpufreq-cpu0. Fix it. Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org> Acked-by: NShawn Guo <shawn.guo@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 01 4月, 2013 19 次提交
-
-
由 Stratos Karafotis 提交于
Use an inline function to evaluate freq_target to avoid duplicate code. Also, define a macro for the default frequency step. Signed-off-by: NStratos Karafotis <stratosk@semaphore.gr> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Silviu-Mihai Popescu 提交于
Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages so all explicit error messages can be removed from the failure code paths. Signed-off-by: NSilviu-Mihai Popescu <silviupopescu1990@gmail.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 jhbird.choi@samsung.com 提交于
clk_round_rate() returns singed value which was assigned to an unsigned variable. So it can't be checked for negative. Signed-off-by: NJonghwan Choi <jhbird.choi@samsung.com> Acked-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Stratos Karafotis 提交于
When we evaluate the CPU load for frequency decrease we have to compare the load against down_threshold. There is no need to subtract 10 points from down_threshold. Instead, we have to use the default down_threshold or user's selection unmodified. Signed-off-by: NStratos Karafotis <stratosk@semaphore.gr> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Stratos Karafotis 提交于
sampling_down_factor tunable is unused since commit 8e677ce8 (4 years ago). This patch restores the original functionality and documents the tunable. Signed-off-by: NStratos Karafotis <stratosk@semaphore.gr> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Stratos Karafotis 提交于
Currently we always calculate the CPU iowait time and add it to idle time. If we are in ondemand and we use io_is_busy, we re-calculate iowait time and we subtract it from idle time. With this patch iowait time is calculated only when necessary avoiding the double call to get_cpu_iowait_time_us. We use a parameter in function get_cpu_idle_time to distinguish when the iowait time will be added to idle time or not, without the need of keeping the prev_io_wait. Signed-off-by: NStratos Karafotis <stratosk@semaphore.gr> Acked-by: NViresh Kumar <viresh.kumar@linaro.,org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Namhyung Kim 提交于
The relation should be CPUFREQ_RELATION_L to find optimal frequency when decreasing. Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Namhyung Kim 提交于
If we're on the lowest frequency, no need to calculate new freq. Break out even earlier in this case. Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Viresh Kumar 提交于
Following patch has introduced per cpu timers or works for ondemand and conservative governors. commit 2abfa876 Author: Rickard Andersson <rickard.andersson@stericsson.com> Date: Thu Dec 27 14:55:38 2012 +0000 cpufreq: handle SW coordinated CPUs This causes additional unnecessary interrupts on all cpus when the load is recently evaluated by any other cpu. i.e. When load is recently evaluated by cpu x, we don't really need any other cpu to evaluate this load again for the next sampling_rate time. Some sort of code is present to avoid that but we are still getting timer interrupts for all cpus. A good way of avoiding this would be to modify delays for all cpus (policy->cpus) whenever any cpu has evaluated load. This patch does this change and some related code cleanup. Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Viresh Kumar 提交于
Because we have per cpu timer now, we check if we need to evaluate load again or not (In case it is recently evaluated). Here the 2nd cpu which got timer interrupt updates core_dbs_info->sample_type irrespective of load evaluation is required or not. Which is wrong as the first cpu is dependent on this variable set to an older value. Moreover it would be best in this case to schedule 2nd cpu's timer to sampling_rate instead of freq_lo or hi as that must be managed by the other cpu. In case the other cpu idles in between then also we wouldn't loose much power. Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Viresh Kumar 提交于
Currently MIN_LATENCY_MULTIPLIER is set defined as 100 and so on a system with transition latency of 1 ms, the minimum sampling time comes to be around 100 ms. That is quite big if you want to get better performance for your system. Redefine MIN_LATENCY_MULTIPLIER to 20 so that we can support 20ms sampling rate for such platforms. Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Viresh Kumar 提交于
Currently, there can't be multiple instances of single governor_type. If we have a multi-package system, where we have multiple instances of struct policy (per package), we can't have multiple instances of same governor. i.e. We can't have multiple instances of ondemand governor for multiple packages. Governors directory in sysfs is created at /sys/devices/system/cpu/cpufreq/ governor-name/. Which again reflects that there can be only one instance of a governor_type in the system. This is a bottleneck for multicluster system, where we want different packages to use same governor type, but with different tunables. This patch uses the infrastructure provided by earlier patch and implements init/exit routines for ondemand and conservative governors. Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Viresh Kumar 提交于
Currently, there can't be multiple instances of single governor_type. If we have a multi-package system, where we have multiple instances of struct policy (per package), we can't have multiple instances of same governor. i.e. We can't have multiple instances of ondemand governor for multiple packages. Governors directory in sysfs is created at /sys/devices/system/cpu/cpufreq/ governor-name/. Which again reflects that there can be only one instance of a governor_type in the system. This is a bottleneck for multicluster system, where we want different packages to use same governor type, but with different tunables. This patch is inclined towards providing this infrastructure. Because we are required to allocate governor's resources dynamically now, we must do it at policy creation and end. And so got CPUFREQ_GOV_POLICY_INIT/EXIT. Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Nathan Zimmer 提交于
This eliminates the contention I am seeing in __cpufreq_cpu_get. It also nicely stages the lock to be replaced by the rcu. Signed-off-by: NNathan Zimmer <nzimmer@sgi.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Linus Torvalds 提交于
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
Pull slave-dmaengine fixes from Vinod Koul: "Two fixes for slave-dmaengine. The first one is for making slave_id value correct for dw_dmac and the other one fixes the endieness in DT parsing" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dw_dmac: adjust slave_id accordingly to request line base dmaengine: dw_dma: fix endianess for DT xlate function
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media由 Linus Torvalds 提交于
Pull media fixes from Mauro Carvalho Chehab: "For a some fixes for Kernel 3.9: - subsystem build fix when VIDEO_DEV=y, VIDEO_V4L2=m and I2C=m - compilation fix for arm multiarch preventing IR_RX51 to be selected - regression fix at bttv crop logic - s5p-mfc/m5mols/exynos: a few fixes for cameras on exynos hardware" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] [REGRESSION] bt8xx: Fix too large height in cropcap [media] fix compilation with both V4L2 and I2C as 'm' [media] m5mols: Fix bug in stream on handler [media] s5p-fimc: Do not attempt to disable not enabled media pipeline [media] s5p-mfc: Fix encoder control 15 issue [media] s5p-mfc: Fix frame skip bug [media] s5p-fimc: send valid m2m ctx to fimc_m2m_job_finish [media] exynos-gsc: send valid m2m ctx to gsc_m2m_job_finish [media] fimc-lite: Fix the variable type to avoid possible crash [media] fimc-lite: Initialize 'step' field in fimc_lite_ctrl structure [media] ir: IR_RX51 only works on OMAP2
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block fixes from Jens Axboe: "Alright, this time from 10K up in the air. Collection of fixes that have been queued up since the merge window opened, hence postponed until later in the cycle. The pull request contains: - A bunch of fixes for the xen blk front/back driver. - A round of fixes for the new IBM RamSan driver, fixing various nasty issues. - Fixes for multiple drives from Wei Yongjun, bad handling of return values and wrong pointer math. - A fix for loop properly killing partitions when being detached." * tag 'for-linus-20130331' of git://git.kernel.dk/linux-block: (25 commits) mg_disk: fix error return code in mg_probe() rsxx: remove unused variable rsxx: enable error return of rsxx_eeh_save_issued_dmas() block: removes dynamic allocation on stack Block: blk-flush: Fixed indent code style cciss: fix invalid use of sizeof in cciss_find_cfgtables() loop: cleanup partitions when detaching loop device loop: fix error return code in loop_add() mtip32xx: fix error return code in mtip_pci_probe() xen-blkfront: remove frame list from blk_shadow xen-blkfront: pre-allocate pages for requests xen-blkback: don't store dev_bus_addr xen-blkfront: switch from llist to list xen-blkback: fix foreach_grant_safe to handle empty lists xen-blkfront: replace kmalloc and then memcpy with kmemdup xen-blkback: fix dispatch_rw_block_io() error path rsxx: fix missing unlock on error return in rsxx_eeh_remap_dmas() Adding in EEH support to the IBM FlashSystem 70/80 device driver block: IBM RamSan 70/80 error message bug fix. block: IBM RamSan 70/80 branding changes. ...
-
由 Paul Walmsley 提交于
This reverts commit 6aa97070. Commit 6aa97070 ("lockdep: check that no locks held at freeze time") causes problems with NFS root filesystems. The failures were noticed on OMAP2 and 3 boards during kernel init: [ BUG: swapper/0/1 still has locks held! ] 3.9.0-rc3-00344-ga937536b #1 Not tainted ------------------------------------- 1 lock held by swapper/0/1: #0: (&type->s_umount_key#13/1){+.+.+.}, at: [<c011e84c>] sget+0x248/0x574 stack backtrace: rpc_wait_bit_killable __wait_on_bit out_of_line_wait_on_bit __rpc_execute rpc_run_task rpc_call_sync nfs_proc_get_root nfs_get_root nfs_fs_mount_common nfs_try_mount nfs_fs_mount mount_fs vfs_kern_mount do_mount sys_mount do_mount_root mount_root prepare_namespace kernel_init_freeable kernel_init Although the rootfs mounts, the system is unstable. Here's a transcript from a PM test: http://www.pwsan.com/omap/testlogs/test_v3.9-rc3/20130317194234/pm/37xxevm/37xxevm_log.txt Here's what the test log should look like: http://www.pwsan.com/omap/testlogs/test_v3.8/20130218214403/pm/37xxevm/37xxevm_log.txt Mailing list discussion is here: http://lkml.org/lkml/2013/3/4/221 Deal with this for v3.9 by reverting the problem commit, until folks can figure out the right long-term course of action. Signed-off-by: NPaul Walmsley <paul@pwsan.com> Cc: Mandeep Singh Baines <msb@chromium.org> Cc: Jeff Layton <jlayton@redhat.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: <maciej.rutecki@gmail.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ben Chan <benchan@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 31 3月, 2013 1 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending由 Linus Torvalds 提交于
Pull SCSI target fixes from Nicholas Bellinger: "This includes the bug-fix for a >= v3.8-rc1 regression specific to iscsi-target persistent reservation conflict handling (CC'ed to stable), and a tcm_vhost patch to drop VIRTIO_RING_F_EVENT_IDX usage so that in-flight qemu vhost-scsi-pci device code can detect the proper vhost feature bits. Also, there are two more tcm_vhost patches still being discussed by MST and Asias for v3.9 that will be required for the in-flight qemu vhost-scsi-pci device patch to function properly, and that should (hopefully) be the last target fixes for this round." * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: Fix RESERVATION_CONFLICT status regression for iscsi-target special case tcm_vhost: Avoid VIRTIO_RING_F_EVENT_IDX feature bit
-
- 30 3月, 2013 8 次提交
-
-
由 Andy Shevchenko 提交于
On some hardware configurations we have got the request line with the offset. The patch introduces convert_slave_id() helper for that cases. The request line base is came from the driver data provided by the platform_device_id table. Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NVinod Koul <vinod.koul@intel.com>
-
由 Arnd Bergmann 提交于
As reported by Wu Fengguang's build robot tracking sparse warnings, the dma_spec arguments in the dw_dma_xlate are already byte swapped on little-endian platforms and must not get swapped again. This code is currently not used anywhere, but will be used in Linux 3.10 when the ARM SPEAr platform starts using the generic DMA DT binding. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Reported-by: NFengguang Wu <fengguang.wu@intel.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NVinod Koul <vinod.koul@intel.com>
-
由 Rafael J. Wysocki 提交于
The Adam Belay's e-mail address in MAINTAINERS under PNP SUPPORT is not valid any more and I started to maintain that code in the meantime as a matter of fact, so list myself as a maintainer of it along with Bjorn and remove the Adam's entry from it. Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client由 Linus Torvalds 提交于
Pull ceph fix from Sage Weil: "This fixes a regression introduced during the last merge window when mapping non-existent images." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: don't zero-fill non-image object requests
-
由 Alex Elder 提交于
A result of ENOENT from a read request for an object that's part of an rbd image indicates that there is a hole in that portion of the image. Similarly, a short read for such an object indicates that the remainder of the read should be interpreted a full read with zeros filling out the end of the request. This behavior is not correct for objects that are not backing rbd image data. Currently rbd_img_obj_request_callback() assumes it should be done for all objects. Change rbd_img_obj_request_callback() so it only does this zeroing for image objects. Encapsulate that special handling in its own function. Add an assertion that the image object request is a bio request, since we assume that (and we currently don't support any other types). This resolves a problem identified here: http://tracker.ceph.com/issues/4559 The regression was introduced by bf0d5f50. Reported-by: NDan van der Ster <dan@vanderster.com> Signed-off-by: NAlex Elder <elder@inktank.com> Reviewed-off-by: NSage Weil <sage@inktank.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fixes from Chris Mason: "We've had a busy two weeks of bug fixing. The biggest patches in here are some long standing early-enospc problems (Josef) and a very old race where compression and mmap combine forces to lose writes (me). I'm fairly sure the mmap bug goes all the way back to the introduction of the compression code, which is proof that fsx doesn't trigger every possible mmap corner after all. I'm sure you'll notice one of these is from this morning, it's a small and isolated use-after-free fix in our scrub error reporting. I double checked it here." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: don't drop path when printing out tree errors in scrub Btrfs: fix wrong return value of btrfs_lookup_csum() Btrfs: fix wrong reservation of csums Btrfs: fix double free in the btrfs_qgroup_account_ref() Btrfs: limit the global reserve to 512mb Btrfs: hold the ordered operations mutex when waiting on ordered extents Btrfs: fix space accounting for unlink and rename Btrfs: fix space leak when we fail to reserve metadata space Btrfs: fix EIO from btrfs send in is_extent_unchanged for punched holes Btrfs: fix race between mmap writes and compression Btrfs: fix memory leak in btrfs_create_tree() Btrfs: fix locking on ROOT_REPLACE operations in tree mod log Btrfs: fix missing qgroup reservation before fallocating Btrfs: handle a bogus chunk tree nicely Btrfs: update to use fs_state bit
-
由 Len Brown 提交于
Commit 3e7fc708 ("ia64 idle: delete pm_idle") in 3.9-rc1 didn't finish the job, leaving an un-initialized reference to (*idle)(). [ Haven't seen a crash from this - but seems like we are just being lucky that "idle" is zero so it does get initialized before we jump to randomland - Len ] Reported-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NLen Brown <len.brown@intel.com> Signed-off-by: NTony Luck <tony.luck@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc由 Linus Torvalds 提交于
Pull arc architecture fixes from Vineet Gupta: "This includes fix for a serious bug in DMA mapping API, make allyesconfig wreckage, removal of bogus email-list placeholder in MAINTAINERS, a typo in ptrace helper code and last remaining changes for syscall ABI v3 which we are finally starting to transition-to internally. The request is late than I intended to - but I was held up with debugging a timer link list corruption, for which a proposed fix to generic timer code was sent out to lkml/tglx earlier today." * 'for-curr' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: Fix the typo in event identifier flags used by ptrace arc: fix dma_address assignment during dma_map_sg() ARC: Remove SET_PERSONALITY (tracks cross-arch change) ARC: ABIv3: fork/vfork wrappers not needed in "no-legacy-syscall" ABI ARC: ABIv3: Print the correct ABI ver ARC: make allyesconfig build breakages ARC: MAINTAINERS update for ARC
-
- 29 3月, 2013 9 次提交
-
-
由 Josef Bacik 提交于
A user reported a panic where we were panicing somewhere in tree_backref_for_extent from scrub_print_warning. He only captured the trace but looking at scrub_print_warning we drop the path right before we mess with the extent buffer to print out a bunch of stuff, which isn't right. So fix this by dropping the path after we use the eb if we need to. Thanks, Cc: stable@vger.kernel.org Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Nicholas Bellinger 提交于
This patch fixes a regression introduced in v3.8-rc1 code where a failed target_check_reservation() check in target_setup_cmd_from_cdb() was causing an incorrect SAM_STAT_GOOD status to be returned during a WRITE operation performed by an unregistered / unreserved iscsi initiator port. This regression is only effecting iscsi-target due to a special case check for TCM_RESERVATION_CONFLICT within iscsi_target_erl1.c:iscsit_execute_cmd(), and was still correctly disallowing WRITE commands from backend submission for unregistered / unreserved initiator ports, while returning the incorrect SAM_STAT_GOOD status due to the missing SAM_STAT_RESERVATION_CONFLICT assignment. This regression was first introduced with: commit de103c93 Author: Christoph Hellwig <hch@lst.de> Date: Tue Nov 6 12:24:09 2012 -0800 target: pass sense_reason as a return value Go ahead and re-add the missing SAM_STAT_RESERVATION_CONFLICT assignment during a target_check_reservation() failure, so that iscsi-target code sends the correct SCSI status. All other fabrics using target_submit_cmd_*() with a RESERVATION_CONFLICT call to transport_generic_request_failure() are not effected by this bug. Reported-by: NJeff Leung <jleung@curriegrad2004.ca> Cc: Christoph Hellwig <hch@lst.de> Cc: <stable@vger.kernel.org> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Nicholas Bellinger 提交于
This patch adds a VHOST_SCSI_FEATURES mask minus VIRTIO_RING_F_EVENT_IDX so that vhost-scsi-pci userspace will strip this feature bit once GET_FEATURES reports it as being unsupported on the host. This is to avoid a bug where ->handle_kicks() are missed when EVENT_IDX is enabled by default in userspace code. (mst: Rename to VHOST_SCSI_FEATURES + add comment) Acked-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NAsias He <asias@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Michel Lespinasse 提交于
This reverts commit 18693050 ("mm: introduce VM_POPULATE flag to better deal with racy userspace programs"). VM_POPULATE only has any effect when userspace plays racy games with vmas by trying to unmap and remap memory regions that mmap or mlock are operating on. Also, the only effect of VM_POPULATE when userspace plays such games is that it avoids populating new memory regions that get remapped into the address range that was being operated on by the original mmap or mlock calls. Let's remove VM_POPULATE as there isn't any strong argument to mandate a new vm_flag. Signed-off-by: NMichel Lespinasse <walken@google.com> Signed-off-by: NHugh Dickins <hughd@google.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg Kroah-Hartman: "Here are some USB fixes to resolve issues reported recently, as well as a new device id for the ftdi_sio driver." * tag 'usb-3.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: ftdi_sio: Add support for Mitsubishi FX-USB-AW/-BD usb: Fix compile error by selecting USB_OTG_UTILS USB: serial: fix hang when opening port USB: EHCI: fix bug in iTD/siTD DMA pool allocation xhci: Don't warn on empty ring for suspended devices. usb: xhci: Fix TRB transfer length macro used for Event TRB. usb/acpi: binding xhci root hub usb port with ACPI usb: add find_raw_port_number callback to struct hc_driver() usb: xhci: fix build warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull TTY/serial fixes from Greg Kroah-Hartman: "Here are some tty/serial driver fixes for 3.9. The big thing here is the fix for the huge mess we caused renaming the 8250 driver accidentally in the 3.7 kernel release, without realizing that there were users of the module options that suddenly broke. This is now resolved, and, to top the injury off, we have a backwards- compatible option for those users who got used to the new name since 3.7. Ugh, sorry about that. Other than that, some other minor fixes for issues that have been reported by users." * tag 'tty-3.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Xilinx: ARM: UART: clear pending irqs before enabling irqs TTY: 8250, deprecated 8250_core.* options TTY: 8250, revert module name change serial: 8250_pci: Add WCH CH352 quirk to avoid Xscale detection tty: atmel_serial_probe(): index of atmel_ports[] fix
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging driver fixes from Greg Kroah-Hartman: "Here are two tiny staging driver fixes to resolve issues that have been reported." * tag 'staging-3.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: comedi: s626: fix continuous acquisition staging: zcache: fix typo "64_BIT"
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core由 Linus Torvalds 提交于
Pull sysfs fixes from Greg Kroah-Hartman: "Here are two fixes for sysfs that resolve issues that have been found by the Trinity fuzz tool, causing oopses in sysfs. They both have been in linux-next for a while to ensure that they do not cause any other problems." * tag 'driver-core-3.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: sysfs: handle failure path correctly for readdir() sysfs: fix race between readdir and lseek
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc由 Linus Torvalds 提交于
Pull char/misc driver fixes from Greg Kroah-Hartman: "Here are some small char/misc driver fixes that resolve issues recently reported against the 3.9-rc kernels. All have been in linux-next for a while." * tag 'char-misc-3.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: VMCI: Fix process-to-process DRGAMs. mei: ME hardware reset needs to be synchronized mei: add mei_stop function to stop mei device extcon: max77693: Initialize register of MUIC device to bring up it without platform data extcon: max77693: Fix bug of wrong pointer when platform data is not used extcon: max8997: Check the pointer of platform data to protect null pointer error
-