- 13 7月, 2009 21 次提交
-
-
由 Dan Williams 提交于
Used by Virgin Mobile with the Broadband2Go service, for example. Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Arseniy Lartsev 提交于
This patch introduces a work around for cdc-acm devices which are low speed contrary to the specification, which requires bulk endpoints which are banned in low speed and converted by usbcore to virtual interrupt endpoints if they are used nevertheless. Signed-off-by: NArseniy Lartsev <ars3n@yandex.ru> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
Get rid of some obnoxious and inappropriate messaging, mostly on DaVinci, when usbcore tries to autosuspend a root hub if just a mini/micro-A connector is connected. Symptom: endless stream of messages reading like: musb_bus_suspend 2221: trying to suspend as a_wait_vrise is_active=1 Improve that musb bus suspend primitive a bit. Take advantage of this call to update the OTG state machine if appropriate, moving the device out of the A_WAIT_VRISE state. There's basically no timer for that state transition just now, except with tusb6010; that can make trouble. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
Fix config-dependent compiler warning: CC drivers/usb/gadget/pxa25x_udc.o drivers/usb/gadget/pxa25x_udc.c: In function 'pxa25x_udc_irq': drivers/usb/gadget/pxa25x_udc.c:1806: warning: array subscript is above array bounds Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Philipp Zabel 提交于
Use gpio_is_valid instead of assuming that every GPIO number != 0 is valid while 0 is not. Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Acked-by: NEric Miao <eric.y.miao@gmail.com> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Kevin Hilman 提交于
Numbering for GPIOs on the pcf857x chips on the dm644x EVM board changed when DaVinci chips with more GPIOs were supported. Update the GPIO number used for nVBUS_DRV. Longer term, we need a better abstraction of board-specific setup in this code so we're not hard-coding board specific GPIOs into the driver, but for now this at least gets it back to working with mainline davinci core code. Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
Finish merging updates for DM355 chips into musb/davinci.c now that its support is in mainline: kick in new DRVVBUS controls. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Qiuping Chen 提交于
Support OID_802_3_MAC_OPTIONS in gen_ndis_query_resp() of rndis.c to make RNDIS gadget pass 1c_SetMulticast subtest in Microsoft NDISTest6: http://www.microsoft.com/whdc/DevTools/tools/NDIStest.mspx The other tests in NDISTest6 are passed. [ dbrownell@users.sourceforge.net: remove OID_802_3_MAXIMUM_LIST_SIZE setting ... it was bogus, this code only handles one entry, not 32. And we don't know what would break if we lied about that... ] Signed-off-by: NHelen Chen <helen.chen@intel.com> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
If an error is returned kfree must also be called. Signed-off-by: NOliver Neukum <oliver@neukum.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Arnd Bergmann 提交于
We could just make the USB_OHCI_HCD_PPC_OF option implicit and selected only if at least one of USB_OHCI_HCD_PPC_OF_BE and USB_OHCI_HCD_PPC_OF_LE are set. [ dbrownell@users.sourceforge.net: fix patch manglation and dependencies ] Signed-off-by: NArnd Bergmann <arnd@arndb.de> Tested-by: NSubrata Modak <subrata@linux.vnet.ibm.com> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
commit 1a1fab51 accidentally added the device id to both tables in the driver, which causes problems as this is only a single port device, not a multiple port device. Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
The audio gadget driver should use a "Linux" device id, instead of relying on NetChip's vendor id. So provide one out of our reserved namespace. Cc: Bryan Wu <cooloney@kernel.org> Cc: Mike Frysinger <vapier@gentoo.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This reverts commit 453f7755. The driver should not have been accepted as the MSRT code is not in the main kernel yet, which this depends on. Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Hao Wu <hao.wu@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Brad Lu 提交于
This patch added Qisda(VID) & H21/H20(PID) into to supporting list. Please help to check this patch, From: Brad Lu <Brad.Lu@Qisda.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Kai Engert 提交于
Add modem portion of USB device labeled: Model iCON 210, Qualcomm 3G HSDPA, designed in EU by Option Device starts in usb-storage mode (1e0e:f000) and requires the use of a tool like usb_modeswitch to switch it to modem mode (1e0e:9000). Signed-off-by: NKai Engert <kaie@kuix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mike Frysinger 提交于
The isp1760_plat_remove function is declared with __devexit, so the .remove assignment needs to be wrapped with __devexit_p(). Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This is an update to the "usb-ehci-update-toggle-state-for-linked-qhs" patch. Since an HCD's endpoint_reset method can be called in interrupt context, it mustn't assume that interrupts are enabled or that it can sleep. So we revert to the original way of refreshing QHs' toggle bits. Now the endpoint_reset method merely clears the toggle flag in the device structure (as was done before) and starts an async QH unlink. When the QH is linked again, after the unlink finishes and an URB is queued, the qh_refresh() routine will update the QH's toggle bit. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Tested-by: NDavid <david@unsolicited.net> CC: David Brownell <david-b@pacbell.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Roel Kluin 提交于
FHCI_PORT_DISABLED, -LOW and -FULL are mutually exclusive as status. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jan Capek 提交于
The product ID's for the following devices have been added: - LOAD-n-GO - ICD-U64 - PRIME-8 Signed-off-by: NJan Capek <jan@ccsinfo.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Paulius Zaleckas 提交于
Move USB_GADGET_IMX to the right section of Kconfig as this controller is available only as integrated on i.MX CPU. Signed-off-by: NPaulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Gianpaolo Cugola 提交于
I recently bought a PC interface for the Cressi Edy dive computer (www.cressi.it) and discovered that it uses the pl2303 chip, albeit with ad-hoc vendor and product ids (04b8, 0521 respectively). Being in the process of writing a linux software for such device (cressi only provides a windows software), I patched the pl2303 linux driver to have the interface recognized. I am submitting you the patch (very basic) for inclusion in next kernel version. From: Gianpaolo Cugola <gianpaoloc@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 12 7月, 2009 2 次提交
-
-
由 Linus Torvalds 提交于
This reverts commit 097041e5. Trond had a better fix, which is the parent of this one ("Fix compile error due to congestion_wait() changes") Requested-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Acked-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Trond Myklebust 提交于
Move the definition of BLK_RW_ASYNC/BLK_RW_SYNC into linux/backing-dev.h so that it is available to all callers of set/clear_bdi_congested(). This replaces commit 097041e5 ("fuse: Fix build error"), which will be reverted. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Acked-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 7月, 2009 17 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - targa and targa-2ch fix ALSA: hda - fix beep tone calculation for IDT/STAC codecs ALSA: hda - Missing volume controls for Intel HDA (ALC269/EeePC) ALSA: hda - Disable AMD SB600 64bit address support only ALSA: hda - Check widget types while parsing capture source in patch_via.c ALSA: hda - Fix capture source selection in patch_via.c ALSA: hda - Add missing EAPD initialization for VIA codecs ALSA: hda - Clean up VT170x dig-in initialization code ALSA: hda - Fix error path in the sanity check in azx_pcm_open() ALSA: hda - move 8086:fb30 quirk (stac9205) to the proper section ASoC: Fix wm8753 register cache size and initialization ASoC: add locking to mpc5200-psc-ac97 driver ASoC: Fix mpc5200-psc-ac97 to ensure the data ready bit is cleared ASoC: Fix register cache initialisation for WM8753
-
commit 5404ac8e ("isofs: cleanup mount option processing") missed conversion of joliet option flag resulting in non-working Joliet support. CC: walt <w41ter@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
PL2303 has private data shovelling methods that also have no fast path. Fix them to work the same way as the default handler. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
The sysrq code acquired a kref leak. Fix it by passing the tty separately from the caller (thus effectively using the callers kref which all the callers hold anyway) Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
We can't go around calling all sorts of magic per character functions at full rate 3G data speed. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/ubi-2.6由 Linus Torvalds 提交于
* 'linux-next' of git://git.infradead.org/ubi-2.6: UBI: fix compilation warnings UBI: fix NOR flash recovery UBI: nicify image sequence number handling UBI: add image sequence number to EC header UBI: remove bogus debugging checks UBI: add empty eraseblocks verification
-
git://git.infradead.org/ubifs-2.6由 Linus Torvalds 提交于
* 'linux-next' of git://git.infradead.org/ubifs-2.6: UBIFS: fix corruption dump UBIFS: clean up free space checking UBIFS: small amendments in the LEB scanning code UBIFS: dump a little more in case of corruptions MAINTAINERS: update ahunter's e-mail address UBIFS: allow more than one volume to be mounted UBIFS: fix assertion warning UBIFS: minor spelling and grammar fixes UBIFS: fix 64-bit divisions in debug print UBIFS: few spelling fixes UBIFS: set write-buffer timout to 3-5 seconds UBIFS: slightly optimize write-buffer timer usage UBIFS: improve debugging messaged UBIFS: fix integer overflow warning
-
git://git390.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] define KTIME_SCALAR for 32-bit s390 [S390] add generic atomic64 support for 31 bit [S390] improve suspend/resume error messages [S390] set SCHED_OMIT_FRAME_POINTER for s390 [S390] add __ucmpdi2() helper function [S390] perf_counter build fix [S390] shutdown actions: save/return rc from init function [S390] dasd: correct debugfeature sense dump [S390] udelay: disable lockdep to avoid false positives [S390] monreader: fix dev_set_drvdata conversion [S390] sclp: fix compile error for !SCLP_CONSOLE
-
git://git.open-osd.org/linux-open-osd由 Linus Torvalds 提交于
* 'for-linus' of git://git.open-osd.org/linux-open-osd: osdblk: Adjust queue limits to lower device's limits osdblk: a Linux block device for OSD objects MAINTAINERS: Add osd maintained files (F:) exofs: Avoid using file_fsync() exofs: Remove IBM copyrights exofs: Fix bio leak in error handling path (sync read)
-
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel由 Linus Torvalds 提交于
* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (22 commits) drm/i915: Fix for LVDS VBT change on IGDNG drm/i915: Zap the GTT mapping when transitioning from untiled to tiled. drm/i915: Refactor calls to unmap_mapping_range drm/i915: Avoid saving/restore the modesetting registers twice in KMS mode drm: Disable the unused connectors explicitly when resuming with KMS. drm/i915: Restore the KMS modeset for every activated CRTC drm/i915: Fix harmless warning from patch merged after i2c rework. drm/i915: Disable GEM when a broken video BIOS takes up the whole aperture. drm/i915: Check the LID device to decide whether the LVDS should be initialized drm/i915: Move lock to more reasonable location drm/i915: Add gtt_offset to gem object list debugfs output drm/i915: Remove gtt_bound from drm_i915_gem_object drm/i915: Disable VGA output when doing DRM_MODE_DPMS_OFF. drm/i915: crt fetch EDID by DVI-I converter on G4x platform drm/i915: Don't update display FIFO watermark on IGDNG drm/i915: Adjust DisplayPort clocks to use 96MHz reference drm/i915: Make driver less chatty drm/i915: fix up a raw 64bit divide drm/i915: enable sdvo lvds scaling function. drm/i915: Set SSC frequency for 8xx chips correctly ...
-
由 Amerigo Wang 提交于
exception.txt only explains the code on x86, so it's better to move it into Documentation/x86 directory. And also rename it to exception-tables.txt which looks much more reasonable. This patch is on top of the previous one. Signed-off-by: NWANG Cong <amwang@redhat.com> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Amerigo Wang 提交于
Update Documentation/exception.txt. Remove trailing whitespaces in it. Signed-off-by: NWANG Cong <amwang@redhat.com> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Larry Finger 提交于
When building v2.6.31-rc2-344-g69ca06c9, the following build errors are found due to missing includes: CC [M] fs/fuse/dev.o fs/fuse/dev.c: In function ‘request_end’: fs/fuse/dev.c:289: error: ‘BLK_RW_SYNC’ undeclared (first use in this function) ... fs/nfs/write.c: In function ‘nfs_set_page_writeback’: fs/nfs/write.c:207: error: ‘BLK_RW_ASYNC’ undeclared (first use in this function) Signed-off-by: Larry Finger@lwfinger.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: cfq-iosched: reset oom_cfqq in cfq_set_request() block: fix sg SG_DXFER_TO_FROM_DEV regression block: call blk_scsi_ioctl_init() Fix congestion_wait() sync/async vs read/write confusion
-
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: nilfs2: fix disorder in cp count on error during deleting checkpoints nilfs2: fix lockdep warning between regular file and inode file nilfs2: fix incorrect KERN_CRIT messages in case of write failures nilfs2: fix hang problem of log writer which occurs after write failures nilfs2: remove unlikely directive causing mis-conversion of error code
-
由 Linus Torvalds 提交于
Merge branch 'core-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: dma-debug: Fix the overlap() function to be correct and readable oprofile: reset bt_lost_no_mapping with other stats x86/oprofile: rename kernel parameter for architectural perfmon to arch_perfmon signals: declare sys_rt_tgsigqueueinfo in syscalls.h rcu: Mark Hierarchical RCU no longer experimental dma-debug: Put all hash-chain locks into the same lock class dma-debug: fix off-by-one error in overlap function
-
由 Linus Torvalds 提交于
Merge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (50 commits) perf report: Add "Fractal" mode output - support callchains with relative overhead rate perf_counter tools: callchains: Manage the cumul hits on the fly perf report: Change default callchain parameters perf report: Use a modifiable string for default callchain options perf report: Warn on callchain output request from non-callchain file x86: atomic64: Inline atomic64_read() again x86: atomic64: Clean up atomic64_sub_and_test() and atomic64_add_negative() x86: atomic64: Improve atomic64_xchg() x86: atomic64: Export APIs to modules x86: atomic64: Improve atomic64_read() x86: atomic64: Code atomic(64)_read and atomic(64)_set in C not CPP x86: atomic64: Fix unclean type use in atomic64_xchg() x86: atomic64: Make atomic_read() type-safe x86: atomic64: Reduce size of functions x86: atomic64: Improve atomic64_add_return() x86: atomic64: Improve cmpxchg8b() x86: atomic64: Improve atomic64_read() x86: atomic64: Move the 32-bit atomic64_t implementation to a .c file x86: atomic64: The atomic64_t data type should be 8 bytes aligned on 32-bit too perf report: Annotate variable initialization ...
-