- 19 11月, 2009 2 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ASoC: tlv320aic23 fix rate selection ASoC: OMAP3 Pandora: update for TWL4030 codec changes ASoC: Modifying the license string GPLv2 for OMAP3 EVM ALSA: hda - Fix quirk for VAIO type G ALSA: usb - Quirk to disable master volume control in PCM2702
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (42 commits) cxgb3: fix premature page unmap ibm_newemac: Fix EMACx_TRTR[TRT] bit shifts vlan: Fix register_vlan_dev() error path gro: Fix illegal merging of trailer trash sungem: Fix Serdes detection. net: fix mdio section mismatch warning ppp: fix BUG on non-linear SKB (multilink receive) ixgbe: Fixing EEH handler to handle more than one error net: Fix the rollback test in dev_change_name() Revert "isdn: isdn_ppp: Use SKB list facilities instead of home-grown implementation." TI Davinci EMAC : Fix Console Hang when bringing the interface down smsc911x: Fix Console Hang when bringing the interface down. mISDN: fix error return in HFCmulti_init() forcedeth: mac address fix r6040: fix version printing Bluetooth: Fix regression with L2CAP configuration in Basic Mode Bluetooth: Select Basic Mode as default for SOCK_SEQPACKET Bluetooth: Set general bonding security for ACL by default r8169: Fix receive buffer length when MTU is between 1515 and 1536 can: add the missing netlink get_xstats_size callback ...
-
- 18 11月, 2009 38 次提交
-
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6由 Linus Torvalds 提交于
* 'sh/for-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Fixup last users of irq_chip->typename uio: pm_runtime_disable is needed if failed
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: option.c: add support for D-Link DWM-162-U5 USB: usbmon: fix bug in mon_buff_area_shrink USB: xhci: Fix scratchpad deallocation. USB: xhci: Fix TRB physical to virtual address translation. USB: xhci: Fix bug memory free after failed initialization. USB: cdc_acm: Fix memory leak after hangup USB: cdc_acm: Fix race condition when opening tty USB: ohci: quirk AMD prefetch for USB 1.1 ISO transfer
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: tty: cp210x: Fix carrier handling tty_port: If we are opened non blocking we still need to raise the carrier
-
由 Troy Kisky 提交于
Fix the ordering of sr_valid_mask array. The lower bit of the index represents USB not bosr. Reported-by: NAnuj Aggarwal <anuj.aggarwal@ti.com> Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Grazvydas Ignotas 提交于
A while ago TWL4030 had it's playback stream name changed, but pandora needs it for it's playback path. Update to correct stream name so that playback works again. Also mark VIBRA output as not connected. Signed-off-by: NGrazvydas Ignotas <notasas@gmail.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Anuj Aggarwal 提交于
Correcting the license string from GPLv2 -> GPL v2. Found the problem while building OMAP3 ASoC driver as module. Signed-off-by: NAnuj Aggarwal <anuj.aggarwal@ti.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Divy Le Ray 提交于
unmap Rx page only when guaranteed that this page won't be used anymore to allocate rx page chunks. Signed-off-by: NDivy Le Ray <divy@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dave Mitchell 提交于
The TRT bit shifts were reversed for EMAC4 and non-EMAC4 during the port from ibm_emac to ibm_newemac. This patch corrects that error. Signed-off-by: NDave Mitchell <dmitchell@appliedmicro.com> Acked-by: NFeng Kan <fkan@appliedmicro.com> Acked-by: NProdyut Hazarika <phazarika@appliedmicro.com> Acked-by: NStefan Roese <sr@denx.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Gleixner 提交于
The typename member of struct irq_chip was kept for migration purposes and is obsolete since more than 2 years. Fix up the leftovers. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: linux-sh@vger.kernel.org Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Peter Zijlstra 提交于
This is for consistency with various ioctl() operations that include the suffix "PGRP" in their names, and also for consistency with PRIO_PGRP, used with setpriority() and getpriority(). Also, using PGRP instead of GID avoids confusion with the common abbreviation of "group ID". I'm fine with anything that makes it more consistent, and if PGRP is what is the predominant abbreviation then I see no need to further confuse matters by adding a third one. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NMichael Kerrisk <mtk.manpages@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stefani Seibold 提交于
Fix a small issue for the stack pointer in /proc/<pid>/stat. In case of a kernel thread the value of the printed stack pointer should be 0. Signed-off-by: NStefani Seibold <stefani@seibold.net> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
Allow memory hotplug and hibernation in the same kernel Memory hotplug and hibernation were exclusive in Kconfig. This is obviously a problem for distribution kernels who want to support both in the same image. After some discussions with Rafael and others the only problem is with parallel memory hotadd or removal while a hibernation operation is in process. It was also working for s390 before. This patch removes the Kconfig level exclusion, and simply makes the memory add / remove functions grab the pm_mutex to exclude against hibernation. Fixes a regression - old kernels didn't exclude memory hotadd and hibernation. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Acked-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Commit 65a64464 ("HWPOISON: Allow schedule_on_each_cpu() from keventd") which allows schedule_on_each_cpu() to be called from keventd added a race condition. schedule_on_each_cpu() may race with cpu hotplug and end up executing the function twice on a cpu. Fix it by moving direct execution into the section protected with get/put_online_cpus(). While at it, update code such that direct execution is done after works have been scheduled for all other cpus and drop unnecessary cpu != orig test from flush loop. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Acked-by: NOleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hidetoshi Seto 提交于
With CONFIG_MEMORY_HOTPLUG I got following warning: WARNING: vmlinux.o(.text+0x1276b0): Section mismatch in reference from the function hotadd_new_pgdat() to the function .meminit.text:free_area_init_node() The function hotadd_new_pgdat() references the function __meminit free_area_init_node(). This is often because hotadd_new_pgdat lacks a __meminit annotation or the annotation of free_area_init_node is wrong. Use __ref to fix this. Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Cc: Vegard Nossum <vegardno@ifi.uio.no> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Roel Kluin 提交于
The return should be negative on errors Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Roel Kluin 提交于
Return a negative error value instead of a positive Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: dmitry pervushin <dpervushin@embeddedalley.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Zhang Le 提交于
Add D-Link DWM-162-U5 device id 1e0e:ce16 into option driver. The device has 4 interfaces, of which 1 is handled by storage and the other 3 by option driver. The device appears first as CD-only 05c6:2100 device and must be switched to 1e0e:ce16 mode either by using "eject CD" or usb_modeswitch. The MessageContent for usb_modeswitch.conf is: "55534243e0c26a85000000000000061b000000020000000000000000000000" Signed-off-by: NZhang Le <r0bertz@gentoo.org> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as1299b) fixes a bug in an error-handling path of usbmon's binary interface. The storage area for URB data is divided into fixed-size blocks. If an URB's data can't be copied, the area reserved for it should be decreased to the size of the truncated information (rounded up to a block boundary). Rounding up the amount to be removed and subtracting it from the reserved size is definitely the wrong thing to do. Also, when the data for an isochronous URB can't be copied, we can still copy the isoc packet descriptors. In fact the current code does copy the descriptors, but then sets the capture length to 0 so they remain inaccessible. The capture length should be reduced to the length of the descriptors, not set to 0. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Acked-by: NPete Zaitcev <zaitcev@redhat.com> CC: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Sarah Sharp 提交于
The scratchpad_free() function uses xhci->page_size to free some memory with pci_free_consistent(). However, the page_size is set to zero before the call, causing kernel oopses on driver unload. Call scratchpad_free() before setting xhci->page_size to zero. Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com> Acked-by: NJohn Youn <John.Youn@synopsys.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Sarah Sharp 提交于
The trb_in_td() function in the xHCI driver is supposed to translate a physical transfer buffer request (TRB) into a virtual pointer to the ring segment that TRB is in. Unfortunately, a mistake in this function may cause endless loops as the driver searches through the linked list of ring segments over and over again. Fix a couple bugs that may lead to loops or bad output: 1. Bail out if we get a NULL pointer when translating the segment's private structure and the starting DMA address of the segment chunk. If this happens, we've been handed a starting TRB pointer from a different ring. 2. Make sure the function works when there's multiple segments in the ring. In the while loop to search through the ring segments, use the current segment variable (cur_seg), rather than the starting segment variable (start_seg) that is passed in. 3. Stop searching the ring if we've run through all the segments in the ring. Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Sarah Sharp 提交于
If the xHCI driver fails during the memory initialization, xhci->ir_set may not be a valid pointer. Check that it points to valid DMA'able memory before writing to that address during the memory freeing process. Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Francesco Lavra 提交于
Am Donnerstag, 10. September 2009 15:43:53 schrieb Dietmar Hilbrich: > Hello, > > i have the following problem with the cdc-acm - driver: > > I'm using the driver with an "Ericsson F3507G" on a Thinkpad T400. > > If a disable the device (with the RFKill-Switch) while it is used by a > programm like ppp, the driver doesn't seem to correctly clean up the tty, > even after the program has been closed) > > The tty is still active (e.g. there still exists an entry in > /sys/dev/char/166:0 if ttyACM0 was used) and if a reacticate the device, > this device entry will be skipped and the Device-Nodes ttyACM1, ttyACM2 > and ttyACM3 will be used. > > This problem was introduced with the commit > 10077d4a (before 2.6.31-rc1) and still > exists in 2.6.31. > > I was able the fix this problem with the following patch: > > diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c > index 2bfc41e..0970d2f 100644 > --- a/drivers/usb/class/cdc-acm.c > +++ b/drivers/usb/class/cdc-acm.c > @@ -676,6 +676,7 @@ static void acm_tty_hangup(struct tty_struct *tty) > struct acm *acm = tty->driver_data; > tty_port_hangup(&acm->port); > acm_port_down(acm, 0); > + acm_tty_unregister(acm); > } I have the same problem with cdc-acm (I'm using a Samsung SGH-U900): when I unplug it from the USB port during a PPP connection, the ppp daemon gets the hangup correctly (and closes the device), but the struct acm corresponding to the device disconnected is not freed. Hence reconnecting the device results in creation of /dev/ttyACM(x+1). The same happens when the system is hibernated during a PPP connection. This memory leak is due to the fact that when the tty is hung up, tty_port_close_start() returns always zero, and acm_tty_close() never reaches the point where acm_tty_unregister() is called. Here is a fix for this. Signed-off-by: NFrancesco Lavra <francescolavra@interfree.it> Acked-by: NOliver Neukum <oliver@neukum.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Henry Gebhardt 提交于
If acm_rx_tasklet() gets called before tty_port_block_til_ready() returns, then bulk IN urbs may not be sent. This fixes it. Signed-off-by: NHenry Gebhardt <gebhardt@astro.uni-tuebingen.de> Acked-by: NOliver Neukum <oliver@neukum.org> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Libin Yang 提交于
The following patch in the driver is required to avoid USB 1.1 device failures that may occur due to requests from USB OHCI controllers may be overwritten if the latency for any pending request by the USB controller is very long (in the range of milliseconds). Signed-off-by: NLibin Yang <libin.yang@amd.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Cox 提交于
Original discussion: http://thread.gmane.org/gmane.linux.usb.general/23217/focus=23248 or http://marc.info/?l=linux-usb&m=125553790714133&w=2 9a68e39d broke carrier handling so that a cp210x setup which needed the carrier lines set up (non CLOCAL) which did not make a call which set the termios bits left the lines down even if CLOCAL was not asserted. Fix this not by reverting but by adding the proper dtr_rts and carrier_raised methods. This both sets the modem lines properly and also implements the correct blocking semantics for the port as required by POSIX. Signed-off-by: NAlan Cox <alan@linux.intel.com> Reported-by: NKarl Hiramoto <karl@hiramoto.org> Tested-by: NKarl Hiramoto <karl@hiramoto.org> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Cox 提交于
Original discussion: http://thread.gmane.org/gmane.linux.usb.general/23217/focus=23248 or http://marc.info/?l=linux-usb&m=125553790714133&w=2 The tty_port code inherited a bug common to various drivers it was based upon. If the tty is opened O_NONBLOCK we do not wait for the carrier to be raised but we must still raise our modem lines if appropriate. (There is a second question here about whether we should do so if CLOCAL is set but that can wait) Signed-off-by: NAlan Cox <alan@linux.intel.com> Reported-by: NKarl Hiramoto <karl@hiramoto.org> Tested-by: NKarl Hiramoto <karl@hiramoto.org> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] bfa: declare MODULE_FIRMWARE [SCSI] gdth: Prevent negative offsets in ioctl CVE-2009-3080 [SCSI] libsas: do not set res = 0 in sas_ex_discover_dev() [SCSI] Fix incorrect reporting of host protection capabilities [SCSI] pmcraid: Fix ppc64 driver build for using cpu_to_le32 on U8 data type [SCSI] ipr: add workaround for MSI interrupts on P7 [SCSI] scsi_transport_fc: Fix WARN message for FC passthru failure paths [SCSI] bfa: fix test in bfad_os_fc_host_init()
-
git://oss.sgi.com/xfs/xfs由 Linus Torvalds 提交于
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: copy li_lsn before dropping AIL lock XFS bug in log recover with quota (bugzilla id 855)
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: lifebook - fix settings for CF-72 Input: psmouse - fix breakage introduced by b7802c5c
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: clear server inode number flag while autodisabling
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] pxa: ensure mfp is in correct range in mfp_{read,write} [ARM] pxa/hx4700: fix hx4700 touchscreen pressure values ARM: 5787/1: U300 COH 901 331 fixes ARM: Fix warning in sa1100-flash.c [ARM] Kirkwood: disable propagation of mbus error to the CPU local bus [ARM] pxa: fix incorrect mfp_to_gpio() conversion [ARM] pxa/colibri: fix AC97 ifdefs and add missing include [ARM] pxa: fix missing underscores in mfp-pxa910.h [ARM] pxa: fix interrupts number calculation when CONFIG_PXA_HAVE_ISA_IRQS=y
-
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: dereferencing freed memory regulator_fixed_voltage_remove() regulator: Fix check of unsigned return value and transmit errors in wm831x_gp_ldo_get_mode() regulator: Handle missing constraints in _regulator_disable()
-
git://github.com/at91linux/linux-2.6-at91由 Linus Torvalds 提交于
* 'for-linus' of git://github.com/at91linux/linux-2.6-at91: at91: at91sam9g20ek modify dual slot evaluation kit
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging由 Linus Torvalds 提交于
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (adt7475) Fix sysfs file names hwmon: (adt7475) Cache limits for 60 seconds hwmon: (adt7475) Fix temperature fault flags hwmon: (s3c-hwmon) Ignore invalid divider settings
-
git://git.o-hand.com/linux-rpurdie-leds由 Linus Torvalds 提交于
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds: leds-gpio: fix possible crash on OF device unbinding backlight: Fix backlight limiting on spitz/corgi devices backlight: lcd - Fix wrong sizeof
-