- 23 6月, 2008 11 次提交
-
-
由 Lennert Buytenhek 提交于
This define isn't used anywhere in the kernel tree -- nuke it. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Acked-by: NRussell King <linux@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Make it clear that Orion top-level IRQs are level-triggered. This means that we don't need an ->ack() handler, or at least, we don't need the ->ack() handler (or the acking part of the ->mask_ack() handler) to actually do anything. Given that, we might as well point our ->mask_ack() handler at the ->mask() handler instead of providing a dummy ->ack() handler, since providing a ->mask_ack() handler on level IRQ sources will prevent ->ack() from ever being called. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Acked-by: NRussell King <linux@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Annotate the entries for the 88fr531-vd CPU core in arch/arm/boot/compressed/head.S and arch/arm/mm/proc-feroceon.S with the full name of the core. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Acked-by: NRussell King <linux@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
The DRAM base address and size fields in the CPU's MBUS bridge have 64KiB granularity, instead of the currently used 16MiB. Since all of the currently supported MBUS peripherals support 64KiB granularity as well, this patch changes the Orion address map code to stop rounding base addresses down and sizes up to multiples of 16MiB. Found by Ke Wei <kewei@marvell.com>. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Acked-by: NRussell King <linux@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Currently, Orion window setup uses hardcoded window indexes for each of the boot/cs0/cs1/cs2/PCIe WA windows. The static window allocation used can clash if board support code will ever attempt to configure both a dev2 and a PCIe WA window, as both of those use CPU mbus window #7 at present. This patch keeps track of the last used window, and opens subsequently requested windows sequentially, starting from 4. (Windows 0-3 are used as MEM/IO windows for the PCI/PCIe buses.) Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Lennert Buytenhek 提交于
More cosmetic cleanup: - Replace 8-space indents by proper tab indents. - In structure initialisers, use a trailing comma for every member. - Collapse "},\n{" in structure initialiers to "}, {". Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Acked-by: NRussell King <linux@arm.linux.org.uk>
-
由 Nicolas Pitre 提交于
This is a natural extension following the previous patch. Non Feroceon based targets are unchanged. Signed-off-by: NNicolas Pitre <nico@marvell.com> Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Nicolas Pitre 提交于
The implementation for memory copy functions on ARM had a (disabled) provision for aligning the source pointer before loading registers with data. Turns out that aligning the _destination_ pointer is much more useful, as the read side is already sufficiently helped with the use of preload. So this changes the definition of the CALGN() macro to target the destination pointer instead, and turns it on for Feroceon processors where the gain is very noticeable. Signed-off-by: NNicolas Pitre <nico@marvell.com> Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Nicolas Pitre 提交于
This code is currently disabled, which explains why no one was affected. Signed-off-by: NNicolas Pitre <nico@marvell.com> Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Nicolas Pitre 提交于
Available for !SMP only at the moment. From Russell: |Basically, if a thread is running on a CPU, thread_saved_fp() is invalid. |So, the question is: what guarantees do we have here that 'tsk' is not |running on another CPU? Signed-off-by: NNicolas Pitre <nico@marvell.com> Tested-by: NLennert Buytenhek <buytenh@marvell.com> Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Nicolas Pitre 提交于
Signed-off-by: NNicolas Pitre <nico@marvell.com> Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
- 21 6月, 2008 19 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: BAST: Remove old IDE driver pcmcia ide kingston compactflash's have a new manufacturer id pcmcia: add another pata/ide ID pcmcia: add an pata/ide ID ide: increase timeout in wait_drive_not_busy() palm_bk3710: fix resource management
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: Kconfig menu touch-up firewire: Kconfig menu touch-up firewire: deadline for PHY config transmission firewire: fw-ohci: unify printk prefixes firewire: fill_bus_reset_event needs lock protection firewire: fw-ohci: write selfIDBufferPtr before LinkControl.rcvSelfID firewire: fw-ohci: disable PHY packet reception into AR context firewire: fw-ohci: use of uninitialized data in AR handler firewire: don't panic on invalid AR request buffer
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: no AC status notification ACPI Exception (video-1721): UNKNOWN_STATUS_CODE, Cant attach device
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (21 commits) drm: only trust core drm ioctls - driver ioctls are a mess. drm/i915: add support for Intel series 4 chipsets. drm/radeon: add hier-z registers for r300 and r500 chipsets drm/radeon: use DSTCACHE_CTLSTAT rather than RB2D_DSTCACHE_CTLSTAT drm/radeon: switch IGP gart to use radeon_write_agp_base() drm/radeon: Restore sw interrupt on resume drm/r500: add support for AGP based cards. drm/radeon: fix texture uploads with large 3d textures (bug 13980) drm/radeon: add initial r500 support. drm/radeon: init pipe setup in kernel code. drm/radeon: fixup radeon_do_engine_reset drm/radeon: fix pixcache and purge/cache flushing registers drm/radeon: write AGP_BASE_2 on chips that support it. drm/radeon: merge IGP chip setup and fixup RS400 vs RS480 support drm/radeon: IGP clean up register and magic numbers. drm/rs690: set base 2 to 0. drm/rs690: set all of gart base address. radeon: add production microcode from AMD drm: pcigart use proper pci map interfaces. drm: the sg alloc ioctl should write back the handle to userspace ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6由 Linus Torvalds 提交于
* 'agp-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6: [agp]: fixup chipset flush for new Intel G4x. agp: brown paper bag patch - put back the two lines it took out.
-
由 Linus Torvalds 提交于
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: softlockup: fix NMI hangs due to lock race - 2.6.26-rc regression rcupreempt: remove export of rcu_batches_completed_bh cpuset: limit the input of cpuset.sched_relax_domain_level
-
由 Linus Torvalds 提交于
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched, delay accounting: fix incorrect delay time when constantly waiting on runqueue sched: CPU hotplug events must not destroy scheduler domains created by the cpusets sched: rt-group: fix RR buglet sched: rt-group: heirarchy aware throttle sched: rt-group: fix hierarchy sched: NULL pointer dereference while setting sched_rt_period_us sched: fix defined-but-unused warning
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, geode: add a VSA2 ID for General Software x86: use BOOTMEM_EXCLUSIVE on 32-bit x86, 32-bit: fix boot failure on TSC-less processors x86: fix NULL pointer deref in __switch_to x86: set PAE PHYSICAL_MASK_SHIFT to 44 bits.
-
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: Blackfin Serial Driver: Use timer to poll CTS PIN instead of workqueue. Blackfin arch: fix typo error in bf548 serial header file
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ahci: sis can't do PMP ata_piix: add TECRA M4 to broken suspend list LIBATA: Add HAVE_PATA_PLATFORM to select PATA_PLATFORM driver sata_mv: warn on PIO with multiple DRQs sata_mv: enable async_notify for 60x1 Rev.C0 and higher libata: don't check whether to use DMA or not for no data commands ahci: jmb361 has only one port
-
由 Linus Torvalds 提交于
The inline assembly in drivers/watchdog/hpwdt.c was incredibly broken, and included all the function prologue and epilogue stuff, even though it was itself then inside a C function where the compiler would add its own prologue and epilogue on top of it all. This then just _happened_ to work if you had exactly the right compiler version and exactly the right compiler flags, so that gcc just happened to not create any prologue at all (the gcc-generated epilogue wouldn't matter, since it would never be reached). But the more proper way to fix it is to simply not do this. Move the inline asm to the top level, with no surrounding function at all (the better alternative would be to remove the prologue and make it actually use proper description of the arguments to the inline asm, but that's a bigger change than the one I'm willing to make right now). Tested-by: NS.Çağlar Onur <caglar@pardus.org.tr> Acked-by: NThomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ben Dooks 提交于
Remove the old BAST IDE driver, as we are now using the platform-pata support. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Christophe Niclaes 提交于
Up to now, Kingston compactflash cards (ab)used the Toshiba Manufacturer's ID, In their new CF cards, they use a new one. Let's the ide subsystem recognize CF cards with the new id. Signed-off-by: NChristophe Niclaes <cniclaes@develtech.com> Acked-by: NPhilippe De Muyter <phdm@macqel.be> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Kristoffer Ericson 提交于
Addition of Transcend 1GB 45x id so that it is properly detected. [bart: fix typo in ide-cs's ID spotted by Alan Cox] Signed-off-by: NWilliam Peters <w1ll14@gmail.com> Signed-off-by: NKristoffer Ericson <Kristoffer_e1@hotmail.com> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> CC: linux-ide@vger.kernel.org Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Matt Reimer 提交于
Add an id for: product info: "M-Systems", "CF300", "" manfid: 0x000a, 0x0000 function: 4 (fixed disk) Signed-off-by: NMatt Reimer <mreimer@vpop.net> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> CC: linux-ide@vger.kernel.org Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Some ATAPI devices take longer than the current max timeout value to become ready (i.e. TEAC DV-W28ECW takes 6 ms) so increase the timeout value to 10 ms. This fixes kernel.org bugzilla bug #10887: http://bugzilla.kernel.org/show_bug.cgi?id=10887Reported-by: NMasanari Iida <standby24x7@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Sergei Shtylyov 提交于
The driver expected a *virtual* address in the IDE platform device's memory resource and didn't request the memory region for the register block. Fix this taking into account the fact that DaVinci SoC devices are fixed-mapped to the virtual memory early and we can get their virtual addresses using IO_ADDRESS() macro, not having to call ioremap()... While at it, also do some cosmetic changes... Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Linus Torvalds 提交于
KAMEZAWA Hiroyuki and Oleg Nesterov point out that since the commit 557ed1fa ("remove ZERO_PAGE") removed the ZERO_PAGE from the VM mappings, any users of get_user_pages() will generally now populate the VM with real empty pages needlessly. We used to get the ZERO_PAGE when we did the "handle_mm_fault()", but since fault handling no longer uses ZERO_PAGE for new anonymous pages, we now need to handle that special case in follow_page() instead. In particular, the removal of ZERO_PAGE effectively removed the core file writing optimization where we would skip writing pages that had not been populated at all, and increased memory pressure a lot by allocating all those useless newly zeroed pages. This reinstates the optimization by making the unmapped PTE case the same as for a non-existent page table, which already did this correctly. While at it, this also fixes the XIP case for follow_page(), where the caller could not differentiate between the case of a page that simply could not be used (because it had no "struct page" associated with it) and a page that just wasn't mapped. We do that by simply returning an error pointer for pages that could not be turned into a "struct page *". The error is arbitrarily picked to be EFAULT, since that was what get_user_pages() already used for the equivalent IO-mapped page case. [ Also removed an impossible test for pte_offset_map_lock() failing: that's not how that function works ] Acked-by: NOleg Nesterov <oleg@tv-sign.ru> Acked-by: NNick Piggin <npiggin@suse.de> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 6月, 2008 5 次提交
-
-
由 Len Brown 提交于
-
由 Len Brown 提交于
-
由 Dave Airlie 提交于
So driver ioctls need a full auditing before we can make this change. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Zhenyu Wang 提交于
Signed-off-by: NZhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Zhenyu Wang 提交于
Signed-off-by: NZhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 19 6月, 2008 5 次提交
-
-
由 Jordan Crouse 提交于
General Software writes their own VSA2 module for their version of the Geode BIOS, which returns a different ID then the standard VSA2. This was causing the framebuffer driver to break for most GSW boards. Signed-off-by: NJordan Crouse <jordan.crouse@amd.com> Cc: tglx@linutronix.de Cc: linux-geode@lists.infradead.org Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Bharath Ravi 提交于
This patch corrects the incorrect value of per process run-queue wait time reported by delay statistics. The anomaly was due to the following reason. When a process leaves the CPU and immediately starts waiting for CPU on the runqueue (which means it remains in the TASK_RUNNABLE state), the time of re-entry into the run-queue is never recorded. Due to this, the waiting time on the runqueue from this point of re-entry upto the next time it hits the CPU is not accounted for. This is solved by recording the time of re-entry of a process leaving the CPU in the sched_info_depart() function IF the process will go back to waiting on the run-queue. This IF condition is verified by checking whether the process is still in the TASK_RUNNABLE state. The patch was tested on 2.6.26-rc6 using two simple CPU hog programs. The values noted prior to the fix did not account for the time spent on the runqueue waiting. After the fix, the correct values were reported back to user space. Signed-off-by: NBharath Ravi <bharathravi1@gmail.com> Signed-off-by: NMadhava K R <madhavakr@gmail.com> Cc: dhaval@linux.vnet.ibm.com Cc: vatsa@in.ibm.com Cc: balbir@in.ibm.com Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Sonic Zhang 提交于
This allows other threads to run when the serial driver polls the CTS PIN in a loop. Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Sonic Zhang 提交于
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Bernhard Walle 提交于
This patch uses the BOOTMEM_EXCLUSIVE for crashkernel reservation also for i386 and prints a error message on failure. The patch is still for 2.6.26 since it is only bug fixing. The unification of reserve_crashkernel() between i386 and x86_64 should be done for 2.6.27. Signed-off-by: NBernhard Walle <bwalle@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Cc: <stable@kernel.org>
-