- 22 8月, 2014 1 次提交
-
-
The LECS response contains the MTU that should be used. Correctly synchronize with other layers when updating. Signed-off-by: NChas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 8月, 2014 4 次提交
-
-
由 David S. Miller 提交于
Missing semicolon in range check fix. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Vasily Averin says: ==================== cbq: incorrectly low bandwidth blocks limited traffic v2: patch description changes Fixes: f0f6ee1f ("cbq: incorrect processing of high limits") Mainstream commit f0f6ee1f ("cbq: incorrect processing of high limits") have side effect: if cbq bandwidth setting is less than real interface throughput non-limited traffic can delay limited traffic for a very long time. This happen because of q->now changes incorrectly in cbq_dequeue(): in described scenario L2T is much greater than real time delay, and q->now gets an extra boost for each transmitted packet. Accumulated boost prevents update q->now, and blocked class can wait very long time until (q->now >= cl->undertime) will be true again. More detailed problem description can be found here: http://www.spinics.net/lists/netdev/msg292493.html Following patches should fix the problem. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vasily Averin 提交于
Now q->now_rt is identical to q->now and is not required anymore. Signed-off-by: NVasily Averin <vvs@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vasily Averin 提交于
Mainstream commit f0f6ee1f ("cbq: incorrect processing of high limits") have side effect: if cbq bandwidth setting is less than real interface throughput non-limited traffic can delay limited traffic for a very long time. This happen because of q->now changes incorrectly in cbq_dequeue(): in described scenario L2T is much greater than real time delay, and q->now gets an extra boost for each transmitted packet. Accumulated boost prevents update q->now, and blocked class can wait very long time until (q->now >= cl->undertime) will be true again. To fix the problem the patch updates q->now on each cbq_update() call. L2T-related pre-modification q->now was moved to cbq_update(). My testing confirmed that it fixes the problem and did not discover any side-effects Fixes: f0f6ee1f ("cbq: incorrect processing of high limits") Signed-off-by: NVasily Averin <vvs@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 8月, 2014 8 次提交
-
-
由 Erik Hugne 提交于
Commit 3b4f302d ("tipc: eliminate redundant locking") introduced a bug by removing the sanity check for message importance, allowing programs to assign any value to the msg_user field. This will mess up the packet reception logic and may cause random link resets. Signed-off-by: NErik Hugne <erik.hugne@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gwenhael Goavec-Merou 提交于
On the one hand, phy_device.c provides a generic reset function if the phy driver does not provide a soft_reset pointer. This generic reset does not take into account the state of the phy, with a potential failure if the phy is in powerdown mode. On the other hand, smsc driver provides a function with both correct reset behaviour and configuration. This patch moves the reset part into a new smsc_phy_reset function and provides the soft_reset pointer to have a correct reset behaviour by default. Signed-off-by: NGwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net由 David S. Miller 提交于
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2014-08-15 This series contains fixes to i40e only. Anjali provides two fixes for i40e, first adds a check for non-active VF before sending admin queue messages to the VFS. This resolves a potential kernel panic which would happen whenever we got a Tx hang and there were VFS that were not up or enabled. The second fix adds additional checks so that we do try to access a VF that is not up or enabled which would dereference a null pointer. Jesse fixes a i40e PTP bug where the hang detection routine was never being run when PTP was enabled. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sven Eckelmann 提交于
1d023284 ("list: fix order of arguments for hlist_add_after(_rcu)") was incorrectly rebased on top of d9124268 ("batman-adv: Fix out-of-order fragmentation support"). The parameter order change of the rebased patch was not re-applied as expected. This causes a memory leak and can cause crashes when out-of-order packets are received. hlist_add_behind will try to access the uninitalized list pointers of frag_entry_new to find the previous/next entry and may modify/read random memory locations. Signed-off-by: NSven Eckelmann <sven@narfation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Florian Fainelli says: ==================== net: phy: bcm7xxx internal PHY fixes Here are 3 small fixes for the Broadcom BCM7xxx internal PHY targeting suspend/resume issues. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
BCM7xxx internal Gigabit PHY on 28nm process do not need anything special to be done during suspend, remove the suspend callback since it might be harmful rather than useful. While at it, update the comment above bcm7xxx_suspend() to reflect that it applies only to 40nm and 65nm process PHY devices. Fixes: b560a58c ("net: phy: add Broadcom BCM7xxx internal PHY driver") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@greenl8ke.davemloft.net>
-
由 Florian Fainelli 提交于
The BCM7xxx internal Gigabit PHYs on 28nm process platforms come out reset without any half-duplex or "hub" compatible advertised modes, which was causing auto-negotiation issues coming out of S3 suspend/resume, we just could not establish a link with a half-duplex only link partner. Make sure that the resume function properly re-configures the PHY device to advertise all supported modes. Fixes: b560a58c ("net: phy: add Broadcom BCM7xxx internal PHY driver") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@greenl8ke.davemloft.net>
-
由 Florian Fainelli 提交于
A wildcard entry with the 32-bits OUI 0x600d8400 was added as part of the BCM7xxx internal PHY driver, but that entry might match other PHYs that are not covered by this driver, so let's just remove it. Fixes: b560a58c ("net: phy: add Broadcom BCM7xxx internal PHY driver") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@greenl8ke.davemloft.net>
-
- 15 8月, 2014 27 次提交
-
-
由 Jesse Brandeburg 提交于
The receive hang detection routine was never being run when PTP was enabled. Change-ID: I200f35b0f3190d31b595df89d678f4c8a2131ba0 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
In some functions we might be doing potential dereference without a check. This patch puts the check in place for all these functions. Also fix the "for loops" so that we increment VF at the right place so that we always do it even if we are short-circuiting the loop through continue. Change-ID: Id4276cfb1e841031bb7b6d6790c414242f364a9f Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
Whenever we get a Tx hang we issue a PFR, which means we send AQ messages to VFS about the reset coming. Unfortunately with the recent fix to be able to send messages to all VFS which earlier was not happening at all we now are sending messages to not just the VFS that are up but also to VFS that are not up. AQ complains about this and sends us an error in ARQ called LAN overflow event for a queue. We check if the queue belongs to a VF and if it does we try to send a vc_notify_vf_reset message to that VF. Well if the VF is not up/enabled we will be entering this function with a non-active VF id. In this function we were assuming VF struct is populated but it won't be if the VF is not active. Change-ID: Ic6733cda4582d3609fe6d83b2872bb2dcdc73f4a Signed-off-by: NAshish N Shah <ashish.n.shah@intel.com> Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull more ACPI and power management updates from Rafael Wysocki: "These are a couple of regression fixes, cpuidle menu governor optimizations, fixes for ACPI proccessor and battery drivers, hibernation fix to avoid problems related to the e820 memory map, fixes for a few cpufreq drivers and a new version of the suspend profiling tool analyze_suspend.py. Specifics: - Fix for an ACPI-based device hotplug regression introduced in 3.14 that causes a kernel panic to trigger when memory hot-remove is attempted with CONFIG_ACPI_HOTPLUG_MEMORY unset from Tang Chen - Fix for a cpufreq regression introduced in 3.16 that triggers a "sleeping function called from invalid context" bug in dev_pm_opp_init_cpufreq_table() from Stephen Boyd - ACPI battery driver fix for a warning message added in 3.16 that prints silly stuff sometimes from Mariusz Ceier - Hibernation fix for safer handling of mismatches in the 820 memory map between the configurations during image creation and during the subsequent restore from Chun-Yi Lee - ACPI processor driver fix to handle CPU hotplug notifications correctly during system suspend/resume from Lan Tianyu - Series of four cpuidle menu governor cleanups that also should speed it up a bit from Mel Gorman - Fixes for the speedstep-smi, integrator, cpu0 and arm_big_little cpufreq drivers from Hans Wennborg, Himangi Saraogi, Markus Pargmann and Uwe Kleine-König - Version 3.0 of the analyze_suspend.py suspend profiling tool from Todd E Brandt" * tag 'pm+acpi-3.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / battery: Fix warning message in acpi_battery_get_state() PM / tools: analyze_suspend.py: update to v3.0 cpufreq: arm_big_little: fix module license spec cpufreq: speedstep-smi: fix decimal printf specifiers ACPI / hotplug: Check scan handlers in acpi_scan_hot_remove() cpufreq: OPP: Avoid sleeping while atomic cpufreq: cpu0: Do not print error message when deferring cpufreq: integrator: Use set_cpus_allowed_ptr PM / hibernate: avoid unsafe pages in e820 reserved regions ACPI / processor: Make acpi_cpu_soft_notify() process CPU FROZEN events cpuidle: menu: Lookup CPU runqueues less cpuidle: menu: Call nr_iowait_cpu less times cpuidle: menu: Use ktime_to_us instead of reinventing the wheel cpuidle: menu: Use shifts when calculating averages where possible
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull DEFINE_PCI_DEVICE_TABLE removal from Bjorn Helgaas: "Part two of the PCI changes for v3.17: - Remove DEFINE_PCI_DEVICE_TABLE macro use (Benoit Taine) It's a mechanical change that removes uses of the DEFINE_PCI_DEVICE_TABLE macro. I waited until later in the merge window to reduce conflicts, but it's possible you'll still see a few" * tag 'pci-v3.17-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Remove DEFINE_PCI_DEVICE_TABLE macro use
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc由 Linus Torvalds 提交于
Pull Sparc fixes from David Miller: "Hook up the memfd syscall, and properly claim all PCI resources discovered when building the PCI device tree" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Hook up memfd_create system call. sparc64: Properly claim resources as each PCI bus is probed. sparc64: Skip bogus PCI bridge ranges. sparc64: Expand PCI bridge probing debug logging.
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: "I'm sending this out, in particular, to get the iwlwifi fix propagated: 1) Fix build due to missing include in i40e driver, from Lucas Tanure. 2) Memory leak in openvswitch port allocation, from Chirstoph Jaeger. 3) Check DMA mapping errors in myri10ge, from Stanislaw Gruszka. 4) Fix various deadlock scenerios in sunvnet driver, from Sowmini Varadhan. 5) Fix cxgb4i build failures with incompatible Kconfig settings of the driver vs ipv6, from Anish Bhatt. 6) Fix generation of ACK packet timestamps in the presence of TSO which will be split up, from Willem de Bruijn. 7) Don't enable sched scan in iwlwifi driver, it causes firmware crashes in some revisions. From Emmanuel Grumbach. 8) Revert a macvlan simplification that causes crashes. 9) Handle RTT calculations properly in the presence of repair'd SKBs, from Andrey Vagin. 10) SIT tunnel lookup uses wrong device index in compares, from Shmulik Ladkani. 11) Handle MTU reductions in TCP properly for ipv4 mapped ipv6 sockets, from Neal Cardwell. 12) Add missing annotations in rhashtable code, from Thomas Graf. 13) Fix false interpretation of two RTOs as being from the same TCP loss event in the FRTO code, from Neal Cardwell" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (42 commits) netlink: Annotate RCU locking for seq_file walker rhashtable: fix annotations for rht_for_each_entry_rcu() rhashtable: unexport and make rht_obj() static rhashtable: RCU annotations for next pointers tcp: fix ssthresh and undo for consecutive short FRTO episodes tcp: don't allow syn packets without timestamps to pass tcp_tw_recycle logic tcp: fix tcp_release_cb() to dispatch via address family for mtu_reduced() sit: Fix ipip6_tunnel_lookup device matching criteria net: ethernet: ibm: ehea: Remove duplicate object from Makefile net: xgene: Check negative return value of xgene_enet_get_ring_size() tcp: don't use timestamp from repaired skb-s to calculate RTT (v2) net: xilinx: Remove .owner field for driver Revert "macvlan: simplify the structure port" iwlwifi: mvm: disable scheduled scan to prevent firmware crash xen-netback: remove loop waiting function xen-netback: don't stop dealloc kthread too early xen-netback: move NAPI add/remove calls xen-netback: fix debugfs entry creation xen-netback: fix debugfs write length check net-timestamp: fix missing tcp fragmentation cases ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless由 David S. Miller 提交于
John W. Linville says: ==================== pull request: wireless 2014-08-14 Please pull this batch of fixes intended for the 3.17 stream... Arend van Spriel brings two brcmfmac fixes, one which fixes a memory leak and one which corrects some merge damage. Emmanuel Grumbach fixes Linus's iwlwifi firmware-related log spam. Rickard Strandqvist does some proper NULL termination after a call to strncpy. Ronald Wahl corrects a carl9170 problem with sending URBs with the wrong endpoint type (resulting in log spam). ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Silences the following sparse warnings: net/netlink/af_netlink.c:2926:21: warning: context imbalance in 'netlink_seq_start' - wrong count at exit net/netlink/af_netlink.c:2972:13: warning: context imbalance in 'netlink_seq_stop' - unexpected unlock Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Call rcu_deference_raw() directly from within rht_for_each_entry_rcu() as list_for_each_entry_rcu() does. Fixes the following sparse warnings: net/netlink/af_netlink.c:2906:25: expected struct rhash_head const *__mptr net/netlink/af_netlink.c:2906:25: got struct rhash_head [noderef] <asn:4>*<noident> Fixes: e341694e ("netlink: Convert netlink_lookup() to use RCU protected hash table") Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
No need to export rht_obj(), all inner to outer object translations occur internally. It was intended to be used with rht_for_each() which now primarily serves as the iterator for rhashtable_remove_pprev() to effectively flush and free the full table. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Properly annotate next pointers as access is RCU protected in the lookup path. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neal Cardwell 提交于
Fix TCP FRTO logic so that it always notices when snd_una advances, indicating that any RTO after that point will be a new and distinct loss episode. Previously there was a very specific sequence that could cause FRTO to fail to notice a new loss episode had started: (1) RTO timer fires, enter FRTO and retransmit packet 1 in write queue (2) receiver ACKs packet 1 (3) FRTO sends 2 more packets (4) RTO timer fires again (should start a new loss episode) The problem was in step (3) above, where tcp_process_loss() returned early (in the spot marked "Step 2.b"), so that it never got to the logic to clear icsk_retransmits. Thus icsk_retransmits stayed non-zero. Thus in step (4) tcp_enter_loss() would see the non-zero icsk_retransmits, decide that this RTO is not a new episode, and decide not to cut ssthresh and remember the current cwnd and ssthresh for undo. There were two main consequences to the bug that we have observed. First, ssthresh was not decreased in step (4). Second, when there was a series of such FRTO (1-4) sequences that happened to be followed by an FRTO undo, we would restore the cwnd and ssthresh from before the entire series started (instead of the cwnd and ssthresh from before the most recent RTO). This could result in cwnd and ssthresh being restored to values much bigger than the proper values. Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NYuchung Cheng <ycheng@google.com> Fixes: e33099f9 ("tcp: implement RFC5682 F-RTO") Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Frederic Sowa 提交于
tcp_tw_recycle heavily relies on tcp timestamps to build a per-host ordering of incoming connections and teardowns without the need to hold state on a specific quadruple for TCP_TIMEWAIT_LEN, but only for the last measured RTO. To do so, we keep the last seen timestamp in a per-host indexed data structure and verify if the incoming timestamp in a connection request is strictly greater than the saved one during last connection teardown. Thus we can verify later on that no old data packets will be accepted by the new connection. During moving a socket to time-wait state we already verify if timestamps where seen on a connection. Only if that was the case we let the time-wait socket expire after the RTO, otherwise normal TCP_TIMEWAIT_LEN will be used. But we don't verify this on incoming SYN packets. If a connection teardown was less than TCP_PAWS_MSL seconds in the past we cannot guarantee to not accept data packets from an old connection if no timestamps are present. We should drop this SYN packet. This patch closes this loophole. Please note, this patch does not make tcp_tw_recycle in any way more usable but only adds another safety check: Sporadic drops of SYN packets because of reordering in the network or in the socket backlog queues can happen. Users behing NAT trying to connect to a tcp_tw_recycle enabled server can get caught in blackholes and their connection requests may regullary get dropped because hosts behind an address translator don't have synchronized tcp timestamp clocks. tcp_tw_recycle cannot work if peers don't have tcp timestamps enabled. In general, use of tcp_tw_recycle is disadvised. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Florian Westphal <fw@strlen.de> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neal Cardwell 提交于
Make sure we use the correct address-family-specific function for handling MTU reductions from within tcp_release_cb(). Previously AF_INET6 sockets were incorrectly always using the IPv6 code path when sometimes they were handling IPv4 traffic and thus had an IPv4 dst. Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Diagnosed-by: NWillem de Bruijn <willemb@google.com> Fixes: 563d34d0 ("tcp: dont drop MTU reduction indications") Reviewed-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shmulik Ladkani 提交于
As of 4fddbf5d ("sit: strictly restrict incoming traffic to tunnel link device"), when looking up a tunnel, tunnel's underlying interface (t->parms.link) is verified to match incoming traffic's ingress device. However the comparison was incorrectly based on skb->dev->iflink. Instead, dev->ifindex should be used, which correctly represents the interface from which the IP stack hands the ipip6 packets. This allows setting up sit tunnels bound to vlan interfaces (otherwise incoming ipip6 traffic on the vlan interface was dropped due to ipip6_tunnel_lookup match failure). Signed-off-by: NShmulik Ladkani <shmulik.ladkani@gmail.com> Acked-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andreas Ruprecht 提交于
In the Makefile, ehea_phyp.o is included twice in the list of object files compile into ehea.o. This change removes one instance. Signed-off-by: NAndreas Ruprecht <rupran@einserver.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tobias Klauser 提交于
xgene_enet_get_ring_size() returns a negative value in case of an error, but its only caller in xgene_enet_create_desc_ring() currently uses the return value directly as u32. Instead, check for a negative value first and error out in case. Also move the call to xgene_enet_get_ring_size() before devm_kzalloc() so we don't need to free anything in the error path. This fixes the following issue reported by the Coverity Scanner: ** CID 1231336: Improper use of negative value (NEGATIVE_RETURNS) /drivers/net/ethernet/apm/xgene/xgene_enet_main.c: 596 in xgene_enet_create_desc_ring() Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrey Vagin 提交于
We don't know right timestamp for repaired skb-s. Wrong RTT estimations isn't good, because some congestion modules heavily depends on it. This patch adds the TCPCB_REPAIRED flag, which is included in TCPCB_RETRANS. Thanks to Eric for the advice how to fix this issue. This patch fixes the warning: [ 879.562947] WARNING: CPU: 0 PID: 2825 at net/ipv4/tcp_input.c:3078 tcp_ack+0x11f5/0x1380() [ 879.567253] CPU: 0 PID: 2825 Comm: socket-tcpbuf-l Not tainted 3.16.0-next-20140811 #1 [ 879.567829] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 879.568177] 0000000000000000 00000000c532680c ffff880039643d00 ffffffff817aa2d2 [ 879.568776] 0000000000000000 ffff880039643d38 ffffffff8109afbd ffff880039d6ba80 [ 879.569386] ffff88003a449800 000000002983d6bd 0000000000000000 000000002983d6bc [ 879.569982] Call Trace: [ 879.570264] [<ffffffff817aa2d2>] dump_stack+0x4d/0x66 [ 879.570599] [<ffffffff8109afbd>] warn_slowpath_common+0x7d/0xa0 [ 879.570935] [<ffffffff8109b0ea>] warn_slowpath_null+0x1a/0x20 [ 879.571292] [<ffffffff816d0a05>] tcp_ack+0x11f5/0x1380 [ 879.571614] [<ffffffff816d10bd>] tcp_rcv_established+0x1ed/0x710 [ 879.571958] [<ffffffff816dc9da>] tcp_v4_do_rcv+0x10a/0x370 [ 879.572315] [<ffffffff81657459>] release_sock+0x89/0x1d0 [ 879.572642] [<ffffffff816c81a0>] do_tcp_setsockopt.isra.36+0x120/0x860 [ 879.573000] [<ffffffff8110a52e>] ? rcu_read_lock_held+0x6e/0x80 [ 879.573352] [<ffffffff816c8912>] tcp_setsockopt+0x32/0x40 [ 879.573678] [<ffffffff81654ac4>] sock_common_setsockopt+0x14/0x20 [ 879.574031] [<ffffffff816537b0>] SyS_setsockopt+0x80/0xf0 [ 879.574393] [<ffffffff817b40a9>] system_call_fastpath+0x16/0x1b [ 879.574730] ---[ end trace a17cbc38eb8c5c00 ]--- v2: moving setting of skb->when for repaired skb-s in tcp_write_xmit, where it's set for other skb-s. Fixes: 431a9124 ("tcp: timestamp SYN+DATA messages") Fixes: 740b0f18 ("tcp: switch rtt estimations to usec resolution") Cc: Eric Dumazet <edumazet@google.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NAndrey Vagin <avagin@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Simek 提交于
There is no need to init .owner field. Based on the patch from Peter Griffin <peter.griffin@linaro.org> "mmc: remove .owner field for drivers using module_platform_driver" This patch removes the superflous .owner field for drivers which use the module_platform_driver API, as this is overriden in platform_driver_register anyway." Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This reverts commit a188a54d. It causes crashes ==================== [ 80.643286] BUG: unable to handle kernel NULL pointer dereference at 0000000000000878 [ 80.670103] IP: [<ffffffff810832e4>] try_to_grab_pending+0x64/0x1f0 [ 80.691289] PGD 22c102067 PUD 235bf0067 PMD 0 [ 80.706611] Oops: 0002 [#1] SMP [ 80.717836] Modules linked in: macvlan nfsd lockd nfs_acl exportfs auth_rpcgss sunrpc oid_registry ioatdma ixgbe(-) mdio igb dca [ 80.757935] CPU: 37 PID: 6724 Comm: rmmod Not tainted 3.16.0-net-next-08-12-2014-FCoE+ #1 [ 80.785688] Hardware name: Intel Corporation S2600CO/S2600CO, BIOS SE5C600.86B.02.03.0003.041920141333 04/19/2014 [ 80.820310] task: ffff880235a9eae0 ti: ffff88022e844000 task.ti: ffff88022e844000 [ 80.845770] RIP: 0010:[<ffffffff810832e4>] [<ffffffff810832e4>] try_to_grab_pending+0x64/0x1f0 [ 80.875326] RSP: 0018:ffff88022e847b28 EFLAGS: 00010046 [ 80.893251] RAX: 0000000000037a6a RBX: 0000000000000878 RCX: 0000000000000000 [ 80.917187] RDX: ffff880235a9eae0 RSI: 0000000000000001 RDI: ffffffff810832db [ 80.941125] RBP: ffff88022e847b58 R08: 0000000000000000 R09: 0000000000000000 [ 80.965056] R10: 0000000000000001 R11: 0000000000000001 R12: ffff88022e847b70 [ 80.988994] R13: 0000000000000000 R14: ffff88022e847be8 R15: ffffffff81ebe440 [ 81.012929] FS: 00007fab90b07700(0000) GS:ffff88043f7a0000(0000) knlGS:0000000000000000 [ 81.040400] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 81.059757] CR2: 0000000000000878 CR3: 0000000235a42000 CR4: 00000000001407e0 [ 81.083689] Stack: [ 81.090739] ffff880235a9eae0 0000000000000878 ffff88022e847b70 0000000000000000 [ 81.116253] ffff88022e847be8 ffffffff81ebe440 ffff88022e847b98 ffffffff810847f1 [ 81.141766] ffff88022e847b78 0000000000000286 ffff880234200000 0000000000000000 [ 81.167282] Call Trace: [ 81.175768] [<ffffffff810847f1>] __cancel_work_timer+0x31/0x170 [ 81.195985] [<ffffffff8108494b>] cancel_work_sync+0xb/0x10 [ 81.214769] [<ffffffffa015ae68>] macvlan_port_destroy+0x28/0x60 [macvlan] [ 81.237844] [<ffffffffa015b930>] macvlan_uninit+0x40/0x50 [macvlan] [ 81.259209] [<ffffffff816bf6e2>] rollback_registered_many+0x1a2/0x2c0 [ 81.281140] [<ffffffff816bf81a>] unregister_netdevice_many+0x1a/0xb0 [ 81.302786] [<ffffffffa015a4ff>] macvlan_device_event+0x1ef/0x240 [macvlan] [ 81.326439] [<ffffffff8108a13d>] notifier_call_chain+0x4d/0x70 [ 81.346366] [<ffffffff8108a201>] raw_notifier_call_chain+0x11/0x20 [ 81.367439] [<ffffffff816bf25b>] call_netdevice_notifiers_info+0x3b/0x70 [ 81.390228] [<ffffffff816bf2a1>] call_netdevice_notifiers+0x11/0x20 [ 81.411587] [<ffffffff816bf6bd>] rollback_registered_many+0x17d/0x2c0 [ 81.433518] [<ffffffff816bf925>] unregister_netdevice_queue+0x75/0x110 [ 81.455735] [<ffffffff816bfb2b>] unregister_netdev+0x1b/0x30 [ 81.475094] [<ffffffffa0039b50>] ixgbe_remove+0x170/0x1d0 [ixgbe] [ 81.495886] [<ffffffff813512a2>] pci_device_remove+0x32/0x60 [ 81.515246] [<ffffffff814c75c4>] __device_release_driver+0x64/0xd0 [ 81.536321] [<ffffffff814c76f8>] driver_detach+0xc8/0xd0 [ 81.554530] [<ffffffff814c656e>] bus_remove_driver+0x4e/0xa0 [ 81.573888] [<ffffffff814c828b>] driver_unregister+0x2b/0x60 [ 81.593246] [<ffffffff8135143e>] pci_unregister_driver+0x1e/0xa0 [ 81.613749] [<ffffffffa005db18>] ixgbe_exit_module+0x1c/0x2e [ixgbe] [ 81.635401] [<ffffffff810e738b>] SyS_delete_module+0x15b/0x1e0 [ 81.655334] [<ffffffff8187a395>] ? sysret_check+0x22/0x5d [ 81.673833] [<ffffffff810abd2d>] ? trace_hardirqs_on_caller+0x11d/0x1e0 [ 81.696339] [<ffffffff8132bfde>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 81.717985] [<ffffffff8187a369>] system_call_fastpath+0x16/0x1b [ 81.738199] Code: 00 48 83 3d 6e bb da 00 00 48 89 c2 0f 84 67 01 00 00 fa 66 0f 1f 44 00 00 49 89 14 24 e8 b5 4b 02 00 45 84 ed 0f 85 ac 00 00 00 <f0> 0f ba 2b 00 72 1d 31 c0 48 8b 5d d8 4c 8b 65 e0 4c 8b 6d e8 [ 81.807026] RIP [<ffffffff810832e4>] try_to_grab_pending+0x64/0x1f0 [ 81.828468] RSP <ffff88022e847b28> [ 81.840384] CR2: 0000000000000878 [ 81.851731] ---[ end trace 9f6c7232e3464e11 ]--- ==================== This bug could be triggered by these steps: modprobe ixgbe ; modprobe macvlan ip link add link p96p1 address 00:1B:21:6E:06:00 macvlan0 type macvlan ip link add link p96p1 address 00:1B:21:6E:06:01 macvlan1 type macvlan ip link add link p96p1 address 00:1B:21:6E:06:02 macvlan2 type macvlan ip link add link p96p1 address 00:1B:21:6E:06:03 macvlan3 type macvlan rmmod ixgbe Reported-by: N"Keller, Jacob E" <jacob.e.keller@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild由 Linus Torvalds 提交于
Pull misc kbuild updates from Michal Marek: "This is the non-critical part of kbuild for 3.17-rc1: - make help hint to use make -s with make kernelrelease et al. - moved a kbuild document to Documentation/kbuild where it belongs - four new Coccinelle scripts, one dropped and one fixed - new make kselftest target to run various tests on the kernel" * 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kbuild: kselftest - new make target to build and run kernel selftests Coccinelle: Script to replace if and BUG with BUG_ON Coccinelle: Script to detect incorrect argument to sizeof Coccinelle: Script to use ARRAY_SIZE instead of division of two sizeofs Coccinelle: Script to detect cast after memory allocation coccinelle/null: solve parse error Documentation: headers_install.txt is part of kbuild kbuild: make -s should be used with kernelrelease/kernelversion/image_name
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild由 Linus Torvalds 提交于
Pull kbuild updates from Michal Marek: - make clean also considers $(extra-m) and $(extra-) to be consistent - cleanup and fixes in scripts/Makefile.host - allow to override the name of the Python 2 executable with make PYTHON=... (only needed for ia64 in practice) - option to split debugingo into *.dwo files to save disk space if the compiler supports it (CONFIG_DEBUG_INFO_SPLIT) - option to use dwarf4 debuginfo if the compiler supports it (CONFIG_DEBUG_INFO_DWARF4) - fix for disabling certain warnings with clang - fix for unneeded rebuild with dash when a command contains backslashes * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kbuild: Fix handling of backslashes in *.cmd files kbuild, LLVMLinux: Supress warnings unless W=1-3 Kbuild: Add a option to enable dwarf4 v2 kbuild: Support split debug info v4 kbuild: allow to override Python command name kbuild: clean-up and bug fix of scripts/Makefile.host kbuild: clean up scripts/Makefile.host kbuild: drop shared library support from Makefile.host kbuild: fix a bug of C++ host program handling kbuild: fix a typo in scripts/Makefile.host scripts/Makefile.clean: clean also $(extra-m) and $(extra-)
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
Pull infiniband/rdma updates from Roland Dreier: "Main set of InfiniBand/RDMA updates for 3.17 merge window: - MR reregistration support - MAD support for RMPP in userspace - iSER and SRP initiator updates - ocrdma hardware driver updates - other fixes..." * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (52 commits) IB/srp: Fix return value check in srp_init_module() RDMA/ocrdma: report asic-id in query device RDMA/ocrdma: Update sli data structure for endianness RDMA/ocrdma: Obtain SL from device structure RDMA/uapi: Include socket.h in rdma_user_cm.h IB/srpt: Handle GID change events IB/mlx5: Use ARRAY_SIZE instead of sizeof/sizeof[0] IB/mlx4: Use ARRAY_SIZE instead of sizeof/sizeof[0] RDMA/amso1100: Check for integer overflow in c2_alloc_cq_buf() IPoIB: Remove unnecessary test for NULL before debugfs_remove() IB/mad: Add user space RMPP support IB/mad: add new ioctl to ABI to support new registration options IB/mad: Add dev_notice messages for various umad/mad registration failures IB/mad: Update module to [pr|dev]_* style print messages IB/ipoib: Avoid multicast join attempts with invalid P_key IB/umad: Update module to [pr|dev]_* style print messages IB/ipoib: Avoid flushing the workqueue from worker context IB/ipoib: Use P_Key change event instead of P_Key polling mechanism IB/ipath: Add P_Key change event support mlx4_core: Add support for secure-host and SMP firewall ...
-
由 John Stultz 提交于
Benjamin Herrenschmidt pointed out that I further missed modifying update_vsyscall after the wall_to_mono value was changed to a timespec64. This causes issues on powerpc32, which expects a 32bit timespec. This patch fixes the problem by properly converting from a timespec64 to a timespec before passing the value on to the arch-specific vsyscall logic. [ Thomas is currently on vacation, but reviewed it and wanted me to send this fix on to you directly. ] Cc: LKML <linux-kernel@vger.kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reported-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NJohn Stultz <john.stultz@linaro.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Merge leftovers from Andrew Morton: "A few leftovers. I have a bunch of OCFS2 patches which are still out for review and which I might sneak along after -rc1. Partly my fault - I should send my review pokes out earlier" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm: fix CROSS_MEMORY_ATTACH help text grammar drivers/mfd/rtsx_usb.c: export device table mm, hugetlb_cgroup: align hugetlb cgroup limit to hugepage size
-
由 Geert Uytterhoeven 提交于
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-