- 23 9月, 2006 40 次提交
-
-
由 Takashi Iwai 提交于
Added the dB scale information for native digital volumes of ice1712 driver. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
- Clean up the code in AK4xxx-ADDA i2c code. - Fix capture gain controls for AK5365 - Changed the static table for DAC/ADC mixer labels to use structs - Implemented TLV entries for each AK codec The volumes in AK4524, AK4528 and AK5365 are corrected with a table to be suitable for dB conversion. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added the missing dB scale information for Mic volume to vxpocket driver. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Luke Ross 提交于
There's at least one USB audio chipset out there which supports only one non-standard rate (ID 0e6a:0310 supports 46875Hz). There's a few other patches for this card which are unsatisfactory because they attempt to map this rate to 44.1k leading to sound distortion. The patch below uses SNDRV_PCM_RATE_KNOT to properly support the non-standard rates where they are available. Signed-off-by: NLuke Ross <luke@lukeross.name> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Andrey Liakhovets 提交于
Fix the bad sound quality on VIA EPIA system using VIA VT1617A (ALSA bug#2381). Signed-off-by: NAndrey Liakhovets <liakh@dol.ru> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added the linear volume TLV entries for YMFPCI native volume controls. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added the definition of linear volume TLV type. Some DSP chips and codecs (e.g. AK codec) use linear volume control. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Krzysztof Helt 提交于
This patch removes setting of incorrect stop_threshold value inside the driver. After the change, playback through the OSS layer works correctly. Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Krzysztof Helt 提交于
This patch fixes time slot leak in the dbri driver. Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Krzysztof Helt 提交于
This patch fixes sound recording after the driver convertion to ring buffered version. It also contains small clean ups to the driver. Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Force to choose model=ref for some Dell laptops with STAC9200 codec chip for fixing the silent mic recording problem (possibly due to a BIOS bug). Reference: ALSA bug#2038 So far, applied to Inspiron 630m, Latitude D620 and 120L. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Retrun error to user TLV_READ ioctl if no TLV is defined. (Until now, nothing was written and rerunred successfully.) Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Fixed the errors at checking info.access field during user TLV_WRITE call. It should have been zero-initialized. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added the dB scale information to vxpocket and vx222 drivers. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added the dB scale information to pcxhr driver. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Jochen Voss 提交于
Fix volume control for the AK4358 DAC. The attenuation control registers of the AK4358 use only 7bit for the volume, the msb is used to enable attenuation output. Without this patch there are 256 volume levels the lower 128 of which are mute. Signed-off-by: NJochen Voss <voss@seehuhn.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Fixed the mic capture with generic parser of hda-codec driver - Use VREF80 for mic pins if available - Handle multiple inputs correctly on audio-input widget node. Confirmed on a conexant codec chip. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Richard Fish 提交于
This patch restores the Intel HDA Sigmatel codec pin configuration on resume. Most of it is dedicated to saving the BIOS pin configuration if necessary, so that even unrecognized chips can be resumed correctly. Signed-off-by: NRichard Fish <bigfish@asmallpond.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Guillaume Munch 提交于
- AR11M and AR11S uses the same chip hence we claim to support the AR Series. - Added commentary about STAC9225s which shares the same id as CXD9872RD. - Added entry for 7662 but won't work automatically until pci_subdevice is known. - 'vaio' model now corresponds to CXD9872RD_VAIO for backward compat. - Replaced STAC766x_VAIO with CXD9872RD_VAIO, STAC9872AK_VAIO, STAC9872K_VAIO and CXD9872AKD_VAIO - Added 'vaio-ar' model for potential future modifications. Signed-off-by: NGuillaume Munch <diabo@free.fr> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Magnus Sandin 提交于
The attached patch will force building the S/PDIF controls on the PCU SSID for Asus P5P800-VM motherboard, even if the AC97_EI_SPDIF bit is not set. Signed-off-by: NMagnus Sandin <magnus@sandin.cx> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Vladimir Avdonin 提交于
Patch enables the internal speaker on acer laptops with ALC883. Signed-off-by: NVladimir Avdonin <vldmrrr@yahoo.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added the dB scale information to opl3sa2 driver. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added the dB scale information to ad1848 driver. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added the dB scale information to ad1816a driver. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added the dB scale information to dummy driver. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added the dB scale information to trident driver. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added the dB scale information to fm801 driver. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added the dB scale information to cs4281 driver. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added the dB scale information to ak4531 codec driver. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added the TLV support to VIA82xx driver for addition of dB range information. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added the TLV support to AC97 codec driver for addition of dB range information. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Stephen Hemminger 提交于
Simple patch to enable Message Signalled Interrupts for the HDA Intel audio controller. Tested with: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03) MSI is better because it means audio doesn't end up sharing IRQ with USB. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Adrian Bunk 提交于
This patch makes the needlessly global snd_emu10k1_resume() static. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Krzysztof Helt 提交于
This patch adds ALSA hardware constrains so stereo is possible only with 16-bit format. It contains small cleanups to ring buffered code as well. Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Krzysztof Helt 提交于
It is a complete rework of low level layer to work on ring buffers for comands and data descriptors. This removes annoying noise due to delay in data buffer switching. Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Krzysztof Helt 提交于
A simplified routines to link and unlink time slots. Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Krzysztof Helt 提交于
A proper way to set DBRI's burst size. The size must be set after each chip reset. Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Krzysztof Helt 提交于
A general clean up and redudant code removal. Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Krzysztof Helt 提交于
The structure is in big part redudant. Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Automatically switch to polling mode for CORB/RIRB communication if the irq-driven mode seems not working well. If the polling mode still doesn't work, switch to single_cmd mode as fallback. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-