This patch removes the unused bt_dump() function and it also removes
its BT_DMP macro. It also unexports the hci_dev_get(), hci_send_cmd()
and hci_si_event() functions.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

There's no need to check for NULL before calling kfree() on a pointer.
Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The fix for the reference counting problem of the signal DLC introduced
a race condition which leads to an oops. The reason for it is not fully
understood by now and so revert this fix, because the reference counting
problem is not crashing the RFCOMM layer and its appearance it rare.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The Kensington Bluetooth USB adapter is based on a Broadcom chip
with the HID proxy support. To initialize these kind of devices
correctly it is necessary to send HCI_Reset as the first command.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch fixes a bug in the PPC440 pagetable attributes that breaks swap
support.  It also adds some notes on the PPC440 attribute fields.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> for CELF
Signed-off-by: NMatt Porter <mporter@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

These bugs have been fixed in the standard zlib for a while.

See for example

 a) http://sources.redhat.com/ml/bug-gnu-utils/1999-06/msg00183.html
 b) http://bugs.gentoo.org/show_bug.cgi?id=94584Signed-off-by: NTim Yamin <plasmaroo@gentoo.org>
Signed-off-by: NTavis Ormandy <taviso@gentoo.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

semundo->lock can leak if semundo->refcount goes from 2 to 1 while
another thread has it locked.  This causes major problems for PREEMPT
kernels.

The simplest fix for now is to undo the single-thread optimization.

This bug was found via relentless testing by Dominik Karall.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

My patch in commit fa72b903 incorrectly
removed blk_queue_tag->real_max_depth.

The original resize implementation was incorrect in the following
points.

 * actual allocation size of tag_index was shorter than real_max_size,
   but assumed to be of the same size, possibly causing memory access
   beyond the allocated area.
 * bits in tag_map between max_deptn and real_max_depth were
   initialized to 1's, making the tags permanently reserved.

In an attempt to fix above two bugs, I had removed allocation optimization
in init_tag_map and real_max_size.  Tag map/index were allocated and freed
immediately during resize.

Unfortunately, I wasn't considering that tag map/index can be resized
dynamically with tags beyond new_depth active.  This led to accessing
freed area after shrinking tags and led to the following bug reporting
thread on linux-scsi.

   http://marc.theaimsgroup.com/?l=linux-scsi&m=112319898111885&w=2

To fix the problem, I've revived real_max_depth without allocation
optimization in init_tag_map, and Andrew Vasquez confirmed that the
problem was fixed.  As Jens is not going to be available for a week, he
asked me to make sure that this patch reaches you.

   http://marc.theaimsgroup.com/?l=linux-scsi&m=112325778530886&w=2

Also, a comment was added to make sure that real_max_size is needed for
dynamic shrinking.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch fixes a crash in the hugepage code.  unmap_hugepage_area() was
assuming that (due to prefault) PTEs must exist for all the area in
question.  However, this may not be the case, if mmap() encounters an error
before the prefault and calls unmap_region() to clean up any partial
mapping.

Depending on the hugepage configuration, this crash can be triggered by an
unpriveleged user.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Cc: William Lee Irwin III <wli@holomorphy.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

[PATCH] i386: Implement machine_emergency_reboot

introduced this new function into arch/i386/reboot.c.  However,
subarchitectures are entitled to implement their own copies of reboot.c
from which this new function is now missing.

It looks like visws will also need a similar fixup
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch includes support for the new Infineon Trusted Platform Module
SLB 9635 TT 1.2 and does further include ACPI-support for both chip
versions (SLD 9630 TT 1.1 and SLB9635 TT 1.2).  Since the ioports and
configuration registers are not correctly set on some machines, the
configuration is now done via PNPACPI, which reads out the correct values
out of the DSDT-table.  Note that you have to have CONFIG_PNP,
CONFIG_ACPI_BUS and CONFIG_PNPACPI enabled to run this driver (assuming
that mainboards including a TPM do have the need for ACPI anyway).
Signed-off-by: NMarcel Selhorst <selhorst@crypto.rub.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add a new record to the REPORTING-BUGS template: "Most recent kernel version
which did not have the bug:".  So we can spot regressions more easily.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Since the beginning of July my Opteron box was randomly crashing and
being rebooted by hardware watchdog.  Today it finally did it in front
of me, and this patch will hopefully fix it.

The problem is that at the end of June (the 28th, to be exact: commit
47f176fd, "[PATCH] Using msleep()
instead of HZ") rtc_get_rtc_time was converted to use msleep() instead
of busy waiting.  But rtc_get_rtc_time is used by hpet_rtc_interrupt,
and scheduling is not allowed during interrupt.  So I'm reverting this
part of original change, replacing msleep() back with busy loop.

The original code was busy waiting for up to 20ms, but on my hardware in
the worst case update-in-progress bit was asserted for at most 363
passes through loop (on 2GHz dual Opteron), much less than even one
jiffie, not even talking about 20ms.  So I changed code to just wait
only as long as necessary.  Otherwise when RTC was set to generate
8192Hz timer, it stopped doing anything for 20ms (160 pulses were
skipped!) from time to time, and this is rather suboptimal as far as I
can tell.
Signed-off-by: NPetr Vandrovec <vandrove@vc.cvut.cz>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When we grow the tables, we forget to free the olds ones
up.

Noticed by Yan Zheng.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We have found what seems to be a small bug in __vm_enough_memory() when
sysctl_overcommit_memory is set to OVERCOMMIT_NEVER.

When this bug occurs the systems fails to boot, with /sbin/init whining
about fork() returning ENOMEM.

We hunted down the problem to this:

The deferred update mecanism used in vm_acct_memory(), on a SMP system,
allows the vm_committed_space counter to have a negative value.

This should not be a problem since this counter is known to be inaccurate.

But in __vm_enough_memory() this counter is compared to the `allowed'
variable, which is an unsigned long.  This comparison is broken since it
will consider the negative values of vm_committed_space to be huge positive
values, resulting in a memory allocation failure.

Signed-off-by: <Jean-Marc.Saffroy@ext.bull.net>
Signed-off-by: <Simon.Derr@bull.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

tcp_write_xmit caches the cwnd value indirectly in cwnd_quota.  When
tcp_transmit_skb reduces the cwnd because of tcp_enter_cwr, the cached
value becomes invalid.

This patch ensures that the cwnd value is always reread after each
tcp_transmit_skb call.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

MSS changes can be lost since we preemptively initialize the tso_segs count
for an SKB before we %100 commit to sending it out.

So, by the time we send it out, the tso_size information can be stale due
to PMTU events.  This mucks up all of the logic in our send engine, and can
even result in the BUG() triggering in tcp_tso_should_defer().

Another problem we have is that we're storing the tp->mss_cache, not the
SACK block normalized MSS, as the tso_size.  That's wrong too.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This avoids the whole #ifdef mess by just getting a copy of
dentry->d_inode before d_delete is called - that makes the codepaths the
same for the INOTIFY/DNOTIFY cases as for the regular no-notify case.
I've been running this under a Gnome session for the last 10 minutes.
Inotify is being used extensively.
Signed-off-by: NJohn McCutchan <ttb@tentacle.dhs.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When recently addressing remarks by Alexey Dobriyan about
the isp116x-hcd, I introduced a bug in the driver. Please
apply the attached patch to fix it.
Signed-off-by: NOlav Kongas <ok@artecdesign.ee>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch has a one line oops fix, plus related cleanups.

 - The bugfix uses microframe scheduling data given to the hardware to
   test "is this a periodic QH", rather than testing for nonzero period.
   (Prevents an oops by providing the correct answer.)

 - The cleanup going along with the patch should make it clearer what's
   going on whenever those bitfields are accessed.

The bug came about when, around January, two new kinds of EHCI interrupt
scheduling operation were added, involving both the high speed (24 KBytes
per millisec) and low/full speed (1-64 bytes per millisec) microframe
scheduling.  A driver for the Edirol UA-1000 Audio Capture Unit ran into
the oops; it used one of the newly supported high speed modes.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The patch which went in was correct, but not quite what I had in mind.
Here is a patch to update that a little bit. Original patch is at:
 http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=4749f32da939d4e4160541b2cadc22492bb507ecSigned-off-by: NPete Zaitcev <zaitcev@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In yenta_socket, we default to using the resource setting of the CardBus
bridge.  However, this is a PCI-bus-centric view of resources and thus needs
to be converted to generic resources first.  Therefore, add a call to
pcibios_bus_to_resource() call in between.  This function is a mere wrapper on
x86 and friends, however on some others it already exists, is added in this
patch (alpha, arm, ppc, ppc64) or still needs to be provided (parisc -- where
is its pcibios_resource_to_bus() ?).
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some PCI devices (e.g. 3c905B, 3c556B) lose all configuration
(including BARs) when transitioning from D3hot->D0.  This leaves such
a device in an inaccessible state.  The patch below causes the BARs
to be restored when enabling such a device, so that its driver will
be able to access it.

The patch also adds pci_restore_bars as a new global symbol, and adds a
correpsonding EXPORT_SYMBOL_GPL for that.

Some firmware (e.g. Thinkpad T21) leaves devices in D3hot after a
(re)boot.  Most drivers call pci_enable_device very early, so devices
left in D3hot that lose configuration during the D3hot->D0 transition
will be inaccessible to their drivers.

Drivers could be modified to account for this, but it would
be difficult to know which drivers need modification.  This is
especially true since often many devices are covered by the same
driver.  It likely would be necessary to replicate code across dozens
of drivers.

The patch below should trigger only when transitioning from D3hot->D0
(or at boot), and only for devices that have the "no soft reset" bit
cleared in the PM control register.  I believe it is safe to include
this patch as part of the PCI infrastructure.

The cleanest implementation of pci_restore_bars was to call
pci_update_resource.  Unfortunately, that does not currently exist
for the sparc64 architecture.  The patch below includes a null
implemenation of pci_update_resource for sparc64.

Some have expressed interest in making general use of the the
pci_restore_bars function, so that has been exported to GPL licensed
modules.
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Revert this June 17 patch: it broke persistence of timers across execve().

Cc: Roland McGrath <roland@redhat.com>
Cc: george anzinger <george@mvista.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The IA32 ptrace emulation currently returns the wrong registers for fs/gs;
it's returning what x86_64 calls gs_base.  We need regs.gsindex in order
for GDB to correctly locate the TLS area.  Without this patch, the 32-bit
GDB testsuite bombs on a 64-bit kernel.  With it, results look about like
I'd expect, although there are still a handful of kernel-related failures
(vsyscall related?).
Signed-off-by: NDaniel Jacobowitz <dan@codesourcery.com>
Acked-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We had a user whose apps weren't working correctly because his "rtc" wasn't
working fully.

For the sake of simplicity, it seems sensible to always enable HPET RTC
emulation.

Remove a special config option for HPET_EMULATE_RTC and make it directly
depend on HPET_TIMER and RTC. This will avoid the hangs when EMULATE_RTC
is not configured and when some userlevel script depends on RTC interrupt,
as in:

http://bugzilla.kernel.org/show_bug.cgi?id=4904Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

mremap's move_vma is applying __vm_stat_account to the old vma which may
have already been freed: move it to just before the do_munmap.

mremapping to and fro with CONFIG_DEBUG_SLAB=y showed /proc/<pid>/status
VmSize and VmData wrapping just like in kernel bugzilla #4842, and fixed by
this patch - worth including in 2.6.13, though not yet confirmed that it
fixes that specific report from Frank van Maarseveen.
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The included patch fixes a problem where a inotify client would receive a
delete event before the file was actually deleted.  The bug affects both
dnotify & inotify.
Signed-off-by: NJohn McCutchan <ttb@tentacle.dhs.org>
Signed-off-by: NRobert Love <rml@novell.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The inotify help text still refers to the character device.  Update it.

Fixes kernel bug #4993.
Signed-off-by: NRobert Love <rml@novell.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The attached patch makes sure that a keyring that failed to instantiate
properly is destroyed without oopsing [CAN-2005-2099].

The problem occurs in three stages:

 (1) The key allocator initialises the type-specific data to all zeroes. In
     the case of a keyring, this will become a link in the keyring name list
     when the keyring is instantiated.

 (2) If a user (any user) attempts to add a keyring with anything other than
     an empty payload, the keyring instantiation function will fail with an
     error and won't add the keyring to the name list.

 (3) The keyring's destructor then sees that the keyring has a description
     (name) and tries to remove the keyring from the name list, which oopses
     because the link pointers are both zero.

This bug permits any user to take down a box trivially.
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The attached patch prevents an error during the key session joining operation
from hanging future joins in the D state [CAN-2005-2098].

The problem is that the error handling path for the KEYCTL_JOIN_SESSION_KEYRING
operation has one error path that doesn't release the session management
semaphore. Further attempts to get the semaphore will then sleep for ever in
the D state.

This can happen in four situations, all involving an attempt to allocate a new
session keyring:

 (1) ENOMEM.

 (2) The users key quota being reached.

 (3) A keyring name that is an empty string.

 (4) A keyring name that is too long.

Any user may attempt this operation, and so any user can cause the problem to
occur.
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The kexec boot is not successful on some power machines since all CPUs are
getting removed from global interrupt queue (GIQ) before kexec boot.  Some
systems always expect at least one CPU in GIQ.  Hence, this patch will make
sure that only secondary CPUs are removed from GIQ.
Signed-off-by: NHaren Myneni <hbabu@us.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This code was never designed to handle more than one instance of do_work()
running at once.
Signed-Off-By: NAlasdair G Kergon <agk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Acked-by: NPrasanna S Panchamukhi <prasanna@in.ibm.com>
Signed-off-by: NJim Keniston <jkenisto@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The recent change to never ignore the bitmap, revealed that the bitmap isn't
begin flushed properly when an array is stopped.

We call bitmap_daemon_work three times as there is a three-stage pipeline for
flushing updates to the bitmap file.
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Firstly, R1BIO_Degraded was being set in a number of places in the resync
code, but is never used there, so get rid of those settings.

Then: When doing a resync, we want to clear the bit in the bitmap iff the
array will be non-degraded when the sync has completed.  However the current
code would clear the bitmap if the array was non-degraded when the resync
*started*, which obviously isn't right (it is for 'resync' but not for
'recovery' - i.e.  rebuilding a failed drive).

This patch calculated 'still_degraded' and uses the to tell bitmap_start_sync
whether this sync should clear the corresponding bit.
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>