- 27 1月, 2009 1 次提交
-
-
由 Mark Brown 提交于
This is a further stage on the road to refactoring away the ASoC platform device. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 24 1月, 2009 1 次提交
-
-
由 Timur Tabi 提交于
Further improvements in the I2C initialization sequence of the CS4270 driver. All ASoC initialization is now done in the I2C probe function. Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 23 1月, 2009 9 次提交
-
-
由 Mark Brown 提交于
It has no external dependencies but needs to be selected for L3 based codecs to work. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Ensures that the DAI and socdev exported by the codec match up with their exported prototype. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
-
由 Peter Ujfalusi 提交于
Typo fix. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Kbuild ignores dependency from things that are themselves selected so ASoC machine drivers need to ensure that the control bus is being built. This also avoids issues where multiple buses are supported by a given codec. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
pxa-regs.h and hardware.h are not intended for use directly in driver code and references to them have been removed in other code - remove them from the newly added e740 and e750 machine drivers. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Fix a merge issue caused by context overlap. Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Timur Tabi 提交于
The CS4270 supports stand-alone mode, where the codec is not connect to the I2C or SPI buses. Instead, input voltages configure the codec at power-on. The CS4270 ASoC device driver has partial support for this mode, but the code was never tested, and partial support doesn't help anyone. It also made the rest of the code more complicated than necessary. [Removed redundant CS4270 dependency on I2C -- broonie] Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 21 1月, 2009 5 次提交
-
-
由 Steve Sakoman 提交于
Commit dc06102a in the asoc tree did not include the necessary Kconfig and Makefile changes. This patch completes the support for Beagleboard Signed-off-by: NSteve Sakoman <steve@sakoman.com> Acked-by: NJarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
-
由 Ian Molton 提交于
This patch fixes the acpture switch name so that it better reflects its purpose. Signed-off-by: NIan Molton <iann@mnementh.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Timur Tabi 提交于
Change the Kconfig and Makefile options for Freescale MPC8610 audio drivers so that they can be compiled as modules, and simplify the Kconfig choices so that only the platform is selected. Also fix the naming of the driver files to conform to ALSA standards. [Removed extraneous SND_SOC dependency -- broonie] Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Timur Tabi 提交于
The Freescale MPC8610 driver was defining two SOC card (snd_soc_card) structures, partially initializing each one, but registering only one of them with ASoC. Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 20 1月, 2009 4 次提交
-
-
由 Mark Brown 提交于
The PCM operations tables are not exported directly but are instead included in the platform structure so should be declared static. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Ian Molton 提交于
This patch takes fixes a number of bugs in the caching code used by several ASoC codec drivers. Mostly off-by-one fixes. Signed-off-by: NIan Molton <ian@mnementh.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Ian Molton 提交于
This patch provides suupport for the wm9705 AC97 codec on the Toshiba e740. Note: The e740 has a hard headphone switch that turns the speaker off and is not software detectable or controlable. Also both headphone and speaker amps share a common output enable. Signed-off-by: NIan Molton <ian@mnementh.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
The Zylonite supports switching the MCLK for the WM9713 between the AC97CLK and CLK_POUT outputs of the PXA processor via switch SW15 on the board. This patch adds support for configuring the system to use CLK_POUT. Unfortunately it is not possible to read the state of SW15 from software so this feature is controlled by a module option 'clk_pout' which should be set to a non-zero value to enable the use of CLK_POUT. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 17 1月, 2009 6 次提交
-
-
由 Mark Brown 提交于
The WM9713 driver does not support configuring the PLL output frequency so the output frequency parameter is irrelevant. Allow users to set it to zero by ignoring it. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
-
由 Ian Molton 提交于
This patch adds support for the wm9712 ac97 codec as used in the Toshiba e800 PDA. It includes support for powering up / down the external headphone and speaker amplifiers on this machine. Signed-off-by: NIan Molton <ian@mnementh.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Ian Molton 提交于
This patch adds support for the wm9705 ac97 codec as used in the Toshiba e750 PDA. It includes support for powering up / down the external headphone and speaker amplifiers on this machine. Signed-off-by: NIan Molton <ian@mnementh.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Ian Molton 提交于
This driver adds support for the wm9705 ac97 codec. The driver supports audio input and output. Signed-off-by: NIan Molton <ian@mnementh.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Ben Nizette 提交于
<mach/hardware.h> doesn't exist on AVR32 and therefore this driver won't build on that arch. AFAICT this driver doesn't actually use the content of that header so easiest just to remove it. Signed-off-by: NBen Nizette <bn@niasdigital.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 16 1月, 2009 2 次提交
-
-
由 Hugo Villeneuve 提交于
Remove dependency on sffsdr_fpga_set_codec_fs() when the SFFSDR FPGA module is not selected. Signed-off-by: NHugo Villeneuve <hugo@hugovil.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Takashi Iwai 提交于
-
- 15 1月, 2009 1 次提交
-
-
由 Peter Ujfalusi 提交于
Modify the check for the mux type to also handle the snd_soc_dapm_value_mux type in a same way as the snd_soc_dapm_mux. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 1月, 2009 11 次提交
-
-
由 Arjan van de Ven 提交于
At 37000 feet somewhere near Greenland I woke up from a half-sleep with the realisation that __lowest_in_progress() is buggy. After landing I checked and there were indeed 2 problems with it; this patch fixes both: * The order of the list checks was wrong * The locking was not correct. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Arjan van de Ven 提交于
There has been some light flamewar on lkml about decoding oopses in modules (as part of the crashdump flamewar). Now this isn't rocket science, just the markup_oops.pl script cheaped out and didn't handle modules. But really; a flamewar all about that?? What happened to C++ in the kernel or reading files from inside the kernel? This patch adds module support to markup_oops.pl; it's not the most pretty perl but it works for my testcases... Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Chris Adams 提交于
Add the Multi-Tech cellular modem firmware to the TI USB serial driver. This firmware was extracted from: ftp://ftp.multitech.com/wireless/wireless_linux.zip Firmware licence: "all firmware components are redistributable in binary form" per support@multitech.com Copyright (C) 2005 Multi-Tech Systems, Inc. Signed-off-by: NChris Adams <cmadams@hiwaay.net> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Chris Adams 提交于
Add Multi-Tech cellular modem support to the ti_usb_3410_5052 driver. Signed-off-by: NChris Adams <cmadams@hiwaay.net> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Chris Adams 提交于
The TI USB serial driver supports specifying alternate vendor and product IDs (since the chips can and are used in devices under other vendor/product IDs). However, the alternate IDs were not loaded in the combined product table. This patch also adds support for loading alternate firmware for alternate vendor/product IDs. Signed-off-by: NChris Adams <cmadams@hiwaay.net> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Julia Lawell found a case where a NULL check was misplaced in the usb-serial code. However as the object in question cannot be NULL the check can simply be removed. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Julia Lawall found an un-needed check in the neo driver. Her patch moves the check to cover the code dereferencing it, however it cannot be NULL anyway so remove the NULL check instead. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
The pty changes and updates for window sizing forgot to correct the kerneldoc Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: kernel/sched.c: add missing forward declaration for 'double_rq_lock' sched: partly revert "sched debug: remove NULL checking in print_cfs_rt_rq()" cpumask: fix CONFIG_NUMA=y sched.c
-
由 Linus Torvalds 提交于
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sparc64: Fix cpumask related build failure smp_call_function_single(): be slightly less stupid, fix smp_call_function_single(): be slightly less stupid rcu: fix bug in rcutorture system-shutdown code
-
git://git.o-hand.com/linux-mfd由 Linus Torvalds 提交于
* 'for-next' of git://git.o-hand.com/linux-mfd: mfd: Fix twl4030-core build mfd: Ensure sm501 GPIO pin mode is GPIO when configured mfd: dm355 evm MMC/SD card detection regulator: PCF50633 pmic driver input: PCF50633 input driver power_supply: PCF50633 battery charger driver rtc: PCF50633 rtc driver mfd: PCF50633 gpio support mfd: PCF50633 adc driver mfd: PCF50633 core driver
-