cifs: remove rw/ro options

These options are handled at the VFS layer. They only ever set the
option in the smb_vol struct. Nothing was ever done with them afterward
anyway.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

cifs: fix problems with earlier patches

cifs_show_address hasn't been introduced yet, and fix a typo that was
silently fixed by a later patch in the series.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

This patch has CIFS look for a '%' in an IPv6 address. If one is
present then it will try to treat that value as a numeric interface
index suitable for stuffing into the sin6_scope_id field.

This should allow people to mount servers on IPv6 link-local addresses.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Acked-by: NDavid Holder <david@erion.co.uk>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Noticed this when tree connect timed out (due to Samba server crash) -
we try to send a tree disconnect for a tid that does not exist
since we don't have a valid tree id yet. This checks that the
session is valid before sending the tree disconnect to handle
this case.
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Signed-off-by: NSteve French <sfrench@us.ibm.com>

Move address display into a new function and display the scopeid as part
of the address in /proc/mounts.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] cnic: fix error: implicit declaration of function ‘__symbol_get’
  [SCSI] cnic: fix undefined reference to `ip6_route_output'

* git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
  avr32: Fix oops on unaligned user access
  avr32: Add support for Mediama RMTx add-on board for ATNGW100
  avr32: Change Atmel ATNGW100 config to add choice of add-on board
  Fix MIMC200 board LCD init
  avr32: Fix clash in ATMEL_USART_ flags
  avr32: remove obsolete hw_interrupt_type
  avr32: Solves problem with inverted MCI detect pin on Merisc board
  atmel-mci: Add support for inverted detect pin

Fix interaction with new generic header stuff as added by:

	commit 6103ec56
	Author: Arnd Bergmann <arnd@arndb.de>
	Date:   Wed May 13 22:56:27 2009 +0000

	    asm-generic: add generic ABI headers

The problem is that asm/signal.h has been made to include asm-generic/signal.h,
but the redundant stuff from asm/signal.h has not been discarded, leading to
multiple redefinitions.

Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'next-i2c' of git://aeryn.fluff.org.uk/bjdooks/linux:
  i2c-ocores: Can add I2C devices to the bus
  i2c-s3c2410: move to using platform idtable to match devices
  i2c: OMAP3: Better noise suppression for fast/standard modes
  i2c: OMAP2/3: Fix scll/sclh calculations
  i2c: Blackfin TWI: implement I2C_FUNC_SMBUS_I2C_BLOCK functionality
  i2c: Blackfin TWI: fix transfer errors with repeat start
  i2c: Blackfin TWI: fix REPEAT START mode doesn't repeat
  i2c: Blackfin TWI: make sure we don't end up with a CLKDIV=0

* 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (80 commits)
  x86, mce: Add boot options for corrected errors
  x86, mce: Fix mce printing
  x86, mce: fix for mce counters
  x86, mce: support action-optional machine checks
  x86, mce: define MCE_VECTOR
  x86, mce: rename mce_notify_user to mce_notify_irq
  x86: fix panic with interrupts off (needed for MCE)
  x86, mce: export MCE severities coverage via debugfs
  x86, mce: implement new status bits
  x86, mce: print header/footer only once for multiple MCEs
  x86, mce: default to panic timeout for machine checks
  x86, mce: improve mce_get_rip
  x86, mce: make non Monarch panic message "Fatal machine check" too
  x86, mce: switch x86 machine check handler to Monarch election.
  x86, mce: implement panic synchronization
  x86, mce: implement bootstrapping for machine check wakeups
  x86, mce: check early in exception handler if panic is needed
  x86, mce: add table driven machine check grading
  x86, mce: remove TSC print heuristic
  x86, mce: log corrected errors when panicing
  ...

* 'for-linus' of git://oss.sgi.com/xfs/xfs: (23 commits)
  xfs: fix small mismerge in xfs_vn_mknod
  xfs: fix warnings with CONFIG_XFS_QUOTA disabled
  xfs: fix freeing memory in xfs_getbmap()
  xfs: use generic Posix ACL code
  xfs: remove SYNC_BDFLUSH
  xfs: remove SYNC_IOWAIT
  xfs: split xfs_sync_inodes
  xfs: use generic inode iterator in xfs_qm_dqrele_all_inodes
  xfs: introduce a per-ag inode iterator
  xfs: remove unused parameter from xfs_reclaim_inodes
  xfs: factor out inode validation for sync
  xfs: split inode flushing from xfs_sync_inodes_ag
  xfs: split inode data writeback from xfs_sync_inodes_ag
  xfs: kill xfs_qmops
  xfs: validate quota log items during log recovery
  xfs: update max log size
  xfs: prevent deadlock in xfs_qm_shake()
  xfs: fix overflow in xfs_growfs_data_private
  xfs: fix double unlock in xfs_swap_extents()
  xfs: fix getbmap vs mmap deadlock
  ...

* 'docs-next' of git://git.lwn.net/linux-2.6:
  Document the debugfs API
  Documentation: Add "how to write a good patch summary" to SubmittingPatches
  SubmittingPatches: fix typo
  docs: Encourage better changelogs in the development process document
  Document Reported-by in SubmittingPatches

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (35 commits)
  hwrng: timeriomem - Fix potential oops (request_mem_region/__devinit)
  crypto: api - Use formatting of module name
  crypto: testmgr - Allow hash test vectors longer than a page
  crypto: testmgr - Check all test vector lengths
  crypto: hifn_795x - fix __dev{init,exit} markings
  crypto: tcrypt - Do not exit on success in fips mode
  crypto: compress - Return produced bytes in crypto_{,de}compress_{update,final}
  hwrng: via_rng - Support VIA Nano hardware RNG on X86_64 builds
  hwrng: via_rng - Support VIA Nano hardware RNG
  hwrng: via_rng - The VIA Hardware RNG driver is for the CPU, not Chipset
  crypto: testmgr - Skip algs not flagged fips_allowed in fips mode
  crypto: testmgr - Mark algs allowed in fips mode
  crypto: testmgr - Add ctr(aes) test vectors
  crypto: testmgr - Dynamically allocate xbuf and axbuf
  crypto: testmgr - Print self-test pass notices in fips mode
  crypto: testmgr - Catch base cipher self-test failures in fips mode
  crypto: testmgr - Add ansi_cprng test vectors
  crypto: testmgr - Add infrastructure for ansi_cprng self-tests
  crypto: testmgr - Add self-tests for rfc4309(ccm(aes))
  crypto: testmgr - Handle AEAD test vectors expected to fail verification
  ...

 drivers/net/cnic.c: In function ‘init_bnx2_cnic’:
 drivers/net/cnic.c:2520: error: implicit declaration of function ‘__symbol_get’
 drivers/net/cnic.c:2520: warning: assignment makes pointer from integer without a cast
 make[1]: *** [drivers/net/cnic.o] Error 1
 make: *** [drivers/net/cnic.o] Error 2

Caused by not including linux/module.h
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Fix cnic build for case of CONFIG_INET=n.
Fix cnic build for case of CONFIG_IPV6=m and CONFIG_CNIC=y.

Fixes these build errors:

cnic.c:(.text+0x236a1d): undefined reference to `ip_route_output_key'
cnic.c:(.text+0x15a8e8): undefined reference to `ip6_route_output'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

The unaligned address exception handler (and others) does not scan the
fixup tables before oopsing. This is bad because it means passing a
badly aligned pointer from user space might crash the kernel.

Fix this by scanning the fixup tables in _exception(). This should
resolve the issue for unaligned addresses as well as other less common
exceptions that might be happening during a userspace access. The page
fault handler already does fixup processing.
Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>

There is sometimes a need for the ocores driver to add devices to the
bus when installed.

i2c_register_board_info can not always be used, because the I2C devices
 are not known at an early state, they could for instance be connected
 on a I2C bus on a PCI device which has the Open Cores IP.

i2c_new_device can not be used in all cases either since the resulting
bus nummer might be unknown.

The solution is the pass a list of I2C devices in the platform data to
the Open Cores driver. This is useful for MFD drivers.
Signed-off-by: NRichard Röjfors <richard.rojfors.ext@mocean-labs.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Change to using platform id table to match either of the two supported
platform device names in the driver. This simplifies the driver init and
exit code

Note, log messages will now be prefixed with 's3c-i2c' instead of the
driver name, so output will be of the form of:

s3c-i2c s3c2440-i2c.0: slave address 0x10
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Use longer noise filter period for fast and standard mode. Based on an
earlier patch by Eero Nurkkala.
Signed-off-by: NAaro Koskinen <aaro.koskinen@nokia.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Fix scll/sclh calculations for HS and fast modes. Currently the driver
uses equal (roughly) low/high times which will result in too short
low time.

OMAP3430 TRM gives the following equations:

	F/S: tLow  = (scll + 7) * internal_clk
	     tHigh = (sclh + 5) * internal_clk
	HS:  tLow  = (scll + 7) * fclk
	     tHigh = (sclh + 5) * fclk

Furthermore, the I2C specification sets the following minimum values
for HS tLow/tHigh for capacitive bus loads 100 pF (maximum speed 3400)
and 400 pF (maximum speed 1700):

	speed	tLow		tHigh
	3400	160 ns		60 ns
	1700	320 ns		120 ns

and for F/S:

	speed	tLow		tHigh
	400	1300 ns		600 ns
	100	4700 ns		4000 ns

By using duty cycles 33/66 (HS, F) and 50/50 (S) we stay above these
minimum values.
Signed-off-by: NAaro Koskinen <aaro.koskinen@nokia.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Some drivers need i2c_smbus_read_i2c_block_data() functionality, so add
support for it to the Blackfin I2C bus driver.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
[ben-linux@fluff.org: shortened subject]
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

We have a custom BF537 board with an I2C RTC (MAX DS3231) running
uclinux 2007R1 for some time. Recently during migration to 2008R1.5-RC3
we losted access to the RTC. The RTC driver calls 'i2c_transfer()' which
in turns calls 'bfin_twi_master_xfer()' in i2c-bfin-twi.c.

Compared with 2007R1, it looks like the 2008R1.5 version of i2c-bin-twi.c
has a new mode 'TWI_I2C-MODE_REPEAT' which corresponds to the Repeat Start
Condition described in the HRM. However, according to the HRM, at XMIT or
RECV interrupt and when the data count is 0, not only is the RESTART bit
supposed to be set, but MDIR must also be set if the next operation is a
receive sequence, and cleared if not. Currently there is no code that looks
at the I2C_M_RD bit in the flag from the next cur_msg and set/clear the MDIR
flag accordingly at the same time that the RSTART bit is set. Instead, MDIR
is set or cleared (by OR'ing with 0?) after the RESTART bit has been cleared
during handling of MCOMP interrupt.

It appears that this is causing our failure with reading the RTC, as a
quick patch to set/clear MDIR when RESTART is set seem to solve our problem.
Signed-off-by: NFrank Shew <fshew@geometrics.com>
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
[ben-linux@fluff.org: shorted subject]
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Avoid rewrite TWI MASTER_CTL reg when issue next message
In i2c repeat transfer mode, byte count of next message should be filled
into part of the TWI MASTER_CTL reg when interrupt MCOMP of last
message transfer is triggered. But, other bits in this reg should
not be touched.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
[ben-linux@fluff.org: shorted subject]
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Make sure we don't end up with an invalid CLKDIV=0 in case someone
specifies 20kHz SCL or less (5 * 1024 / 20 = 0x100).
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
[ben-linux@fluff.org: shortened subject line]
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

...to consolidate some logic used in more than one place.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

show_options is always called with the namespace_sem held. Therefore we
don't need to worry about the vfsmount being NULL, or it vanishing while
the function is running. By the same token, there's no need to worry
about the superblock, tcon, smb or tcp sessions being NULL on entry.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Identation got messed up when merging the current_umask changes with
the generic ACL support.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NFelix Blyakher <felixb@sgi.com>
Signed-off-by: NFelix Blyakher <felixb@sgi.com>

Fix warnings about unitialized dquot variables by making sure
xfs_qm_vop_dqalloc touches it even when quotas are disabled.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NFelix Blyakher <felixb@sgi.com>
Signed-off-by: NFelix Blyakher <felixb@sgi.com>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/configfs:
  configfs: Rework configfs_depend_item() locking and make lockdep happy
  configfs: Silence lockdep on mkdir() and rmdir()

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (30 commits)
  [S390] wire up sys_perf_counter_open
  [S390] wire up sys_rt_tgsigqueueinfo
  [S390] ftrace: add system call tracer support
  [S390] ftrace: add function graph tracer support
  [S390] ftrace: add function trace mcount test support
  [S390] ftrace: add dynamic ftrace support
  [S390] kprobes: use probe_kernel_write
  [S390] maccess: arch specific probe_kernel_write() implementation
  [S390] maccess: add weak attribute to probe_kernel_write
  [S390] profile_tick called twice
  [S390] dasd: forward internal errors to dasd_sleep_on caller
  [S390] dasd: sync after async probe
  [S390] dasd: check_characteristics cleanup
  [S390] dasd: no High Performance FICON in 31-bit mode
  [S390] dcssblk: revert devt conversion
  [S390] qdio: fix access beyond ARRAY_SIZE of irq_ptr->{in,out}put_qs
  [S390] vmalloc: add vmalloc kernel parameter support
  [S390] uaccess: use might_fault() instead of might_sleep()
  [S390] 3270: lock dependency fixes
  [S390] 3270: do not register with tty_register_device
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  add generic lib/checksum.c
  asm-generic: add a generic uaccess.h
  asm-generic: add generic NOMMU versions of some headers
  asm-generic: add generic atomic.h and io.h
  asm-generic: add legacy I/O header files
  asm-generic: add generic versions of common headers
  asm-generic: make bitops.h usable
  asm-generic: make pci.h usable directly
  asm-generic: make get_rtc_time overridable
  asm-generic: rename page.h and uaccess.h
  asm-generic: rename atomic.h to atomic-long.h
  asm-generic: add a generic unistd.h
  asm-generic: add generic ABI headers
  asm-generic: add generic sysv ipc headers
  asm-generic: introduce asm/bitsperlong.h
  asm-generic: rename termios.h, signal.h and mman.h

* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (50 commits)
  drm: include kernel list header file in hashtab header
  drm: Export hash table functionality.
  drm: Split out the mm declarations in a separate header. Add atomic operations.
  drm/radeon: add support for RV790.
  drm/radeon: add rv740 drm support.
  drm_calloc_large: check right size, check integer overflow, use GFP_ZERO
  drm: Eliminate magic I2C frobbing when reading EDID
  drm/i915: duplicate desired mode for use by fbcon.
  drm/via: vfree() no need checking before calling it
  drm: Replace DRM_DEBUG with DRM_DEBUG_DRIVER in i915 driver
  drm: Replace DRM_DEBUG with DRM_DEBUG_MODE in drm_mode
  drm/i915: Replace DRM_DEBUG with DRM_DEBUG_KMS in intel_sdvo
  drm/i915: replace DRM_DEBUG with DRM_DEBUG_KMS in intel_lvds
  drm: add separate drm debugging levels
  radeon: remove _DRM_DRIVER from the preadded sarea map
  drm: don't associate _DRM_DRIVER maps with a master
  drm: simplify kcalloc() call to kzalloc().
  intelfb: fix spelling of "CLOCK"
  drm: fix LOCK_TEST_WITH_RETURN macro
  drm/i915: Hook connector to encoder during load detection (fixes tv/vga detect)
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM: Add empty suspend/resume device irq functions
  PM/Hibernate: Move NVS routines into a seperate file (v2).
  PM/Hibernate: Rename disk.c to hibernate.c
  PM: Separate suspend to RAM functionality from core
  Driver Core: Rework platform suspend/resume, print warning
  PM: Remove device_type suspend()/resume()
  PM/Hibernate: Move memory shrinking to snapshot.c (rev. 2)
  PM/Suspend: Do not shrink memory before suspend
  PM: Remove bus_type suspend_late()/resume_early() V2
  PM core: rename suspend and resume functions
  PM: Rename device_power_down/up()
  PM: Remove unused asm/suspend.h
  x86: unify power/cpu_(32|64).c
  x86: unify power/cpu_(32|64) copyright notes
  x86: unify power/cpu_(32|64) regarding restoring processor state
  x86: unify power/cpu_(32|64) regarding saving processor state
  x86: unify power/cpu_(32|64) global variables
  x86: unify power/cpu_(32|64) headers
  PM: Warn if interrupts are enabled during suspend-resume of sysdevs
  PM/ACPI/x86: Fix sparse warning in arch/x86/kernel/acpi/sleep.c

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: use more NOFS allocation
  dlm: connect to nodes earlier
  dlm: fix use count with multiple joins
  dlm: Make name input parameter of {,dlm_}new_lockspace() const

Merge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf_counter: Start documenting HAVE_PERF_COUNTERS requirements
  perf_counter: Add forward/backward attribute ABI compatibility
  perf record: Explicity program a default counter
  perf_counter: Remove PERF_TYPE_RAW special casing
  perf_counter: PERF_TYPE_HW_CACHE is a hardware counter too
  powerpc, perf_counter: Fix performance counter event types
  perf_counter/x86: Add a quirk for Atom processors
  perf_counter tools: Remove one L1-data alias