- 04 4月, 2008 5 次提交
-
-
由 Andi Kleen 提交于
- Let it update the state of all CPUs. The network stack goes into pains to feed the current IP addresses in, but it is not very effective if that is only done for some random CPU instead of all. So change it to feed bits into all CPUs. I decided to do that lockless because well somewhat random results are ok. v2: Drop rename so that this patch doesn't depend on x86 maintainers Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Anycast DST entries allocated inside ipv6_dev_ac_inc are leaked when network device is stopped without removing IPv6 addresses from it. The bug has been observed in the reality on 2.6.18-rhel5 kernel. In the above case addrconf_ifdown marks all entries as obsolete and ip6_del_rt called from __ipv6_dev_ac_dec returns ENOENT. The referrence is not dropped. The fix is simple. DST entry should not keep referrence when stored in the FIB6 tree. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
In the other case it will be destroyed when last address will be removed from lo inside a namespace. This will break IPv6 in several places. The most obvious one is ip6_dst_ifdown. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
addrconf_ifdown is broken in respect to the usage of how parameter. This function is called with (event != NETDEV_DOWN) and (2) on the IPv6 stop. It the latter case inet6_dev from loopback device should be destroyed. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
The ICMP relookup path is only meant to modify behaviour when appropriate IPsec policies are in place and marked as requiring relookups. It is certainly not meant to modify behaviour when IPsec policies don't exist at all. However, due to an oversight on the error paths existing behaviour may in fact change should one of the relookup steps fail. This patch corrects this by redirecting all errors on relookup failures to the previous code path. That is, if the initial xfrm_lookup let the packet pass, we will stand by that decision should the relookup fail due to an error. This should be safe from a security point-of-view because compliant systems must install a default deny policy so the packet would'nt have passed in that case. Many thanks to Julian Anastasov for pointing out this error. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 4月, 2008 35 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: ohci: fix 2 timers to fire at jiffies + 1s USB: Allow initialization of broken keyspan serial adapters. USB: fix bug in sg initialization in usbtest USB: serial: fix regression in Visor/Palm OS module for kernels >= 2.6.24 USB: cp2101: Add identifiers for the Telegesys ETRX2USB USB: serial: ti_usb_3410_5052: Correct TUSB3410 endpoint requirements. USB: another ehci_iaa_watchdog fix
-
由 Andrew Morton 提交于
A nasty compile error: In file included from security/keys/internal.h:16, from security/keys/sysctl.c:14: include/linux/key-ui.h: In function 'key_permission': include/linux/key-ui.h:51: error: invalid use of undefined type 'struct task_struct' apparently the compiler has decided that it needs to know sizeof(task_struct) so that it can add zero to a task_struct* (which is rather dumb of it). Getting task_struct in scope in these deeply-nested headers is scary-looking, so let's just remove the "+ 0". Cc: David Howells <dhowells@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mathieu Desnoyers 提交于
Markers do not mix well with CONFIG_PREEMPT_RCU because it uses preempt_disable/enable() and not rcu_read_lock/unlock for minimal intrusiveness. We would need call_sched and sched_barrier primitives. Currently, the modification (connection and disconnection) of probes from markers requires changes to the data structure done in RCU-style : a new data structure is created, the pointer is changed atomically, a quiescent state is reached and then the old data structure is freed. The quiescent state is reached once all the currently running preempt_disable regions are done running. We use the call_rcu mechanism to execute kfree() after such quiescent state has been reached. However, the new CONFIG_PREEMPT_RCU version of call_rcu and rcu_barrier does not guarantee that all preempt_disable code regions have finished, hence the race. The "proper" way to do this is to use rcu_read_lock/unlock, but we don't want to use it to minimize intrusiveness on the traced system. (we do not want the marker code to call into much of the OS code, because it would quickly restrict what can and cannot be instrumented, such as the scheduler). The temporary fix, until we get call_rcu_sched and rcu_barrier_sched in mainline, is to use synchronize_sched before each call_rcu calls, so we wait for the quiescent state in the system call code path. It will slow down batch marker enable/disable, but will make sure the race is gone. Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ken'ichi Ohmichi 提交于
Fix the problem that makedumpfile sometimes fails on x86_64 machine. This patch adds the symbol "phys_base" to a vmcoreinfo data. The vmcoreinfo data has the minimum debugging information only for dump filtering. makedumpfile (dump filtering command) gets it to distinguish unnecessary pages, and makedumpfile creates a small dumpfile. On x86_64 kernel which compiled with CONFIG_PHYSICAL_START=0x0 and CONFIG_RELOCATABLE=y, makedumpfile fails like the following: # makedumpfile -d31 /proc/vmcore dumpfile The kernel version is not supported. The created dumpfile may be incomplete. _exclude_free_page: Can't get next online node. makedumpfile Failed. # The cause is the lack of the symbol "phys_base" in a vmcoreinfo data. If the symbol "phys_base" does not exist, makedumpfile considers an x86_64 kernel as non relocatable. As the result, makedumpfile misunderstands the physical address where the kernel is loaded, and it cannot translate a kernel virtual address to physical address correctly. To fix this problem, this patch adds the symbol "phys_base" to a vmcoreinfo data. Signed-off-by: NKen'ichi Ohmichi <oomichi@mxs.nes.nec.co.jp> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: <stable@kernel.org> Acked-by: NVivek Goyal <vgoyal@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Robert P. J. Day 提交于
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jiri Slaby 提交于
Add some locks and unlocks to some code paths. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jiri Slaby 提交于
Unlock two grabbed locks on some paths. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Snitzer 提交于
NBD does not protect the nbd_device's socket from becoming NULL during receives. This closes a race with the NBD_CLEAR_SOCK ioctl (nbd-client -d) setting the nbd_device's socket to NULL right before NBD calls sock_xmit. Signed-off-by: NMike Snitzer <snitzer@gmail.com> Cc: Paul Clements <paul.clements@steeleye.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jim Meyering 提交于
Signed-off-by: NJim Meyering <meyering@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dmitri Vorobiev 提交于
This patch deletes a couple of superfluous word occurrences in the document Documentation/unaligned-memory-access.txt. Thanks to Sebastien Dugue for the remark about English usage. Signed-off-by: NDmitri Vorobiev <dmitri.vorobiev@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ivan Kokshaysky 提交于
Make dma_alloc_coherent respect gfp flags (__GFP_COMP is one that matters). Signed-off-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru> Tested-by: NMichael Cree <mcree@orcon.net.nz> Cc: Richard Henderson <rth@twiddle.net> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Marc Pignat 提交于
Strange chars appear on the serial port when a printk and a printf happens at the same time. This is caused by the pdc sending chars while atmel_console_write (called from printk) is executing Concurent access of uart and console to the same port leads to corrupted data to be transmitted, so disable tx dma (PDC) while writing to the console. Signed-off-by: NMarc Pignat <marc.pignat@hevs.ch> Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Trimarchi 提交于
I found a problem related to losing data during pdc transmission in atmel_serial: connect ttyS1 with ttyS2 using a loopback cable, send 30 byte of packet from one to the other and waiting for 30 byte. On the other side just read and echo the data received. We always call atmel_tx_dma() from the tasklet regardless of what interrupt triggered it. Signed-off-by: Nmichael <trimarchi@gandalf.sssup.it> Acked-by: NHaavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christian Borntraeger 提交于
Currently include/linux/kvm.h is not considered by make headers_install, because Kbuild cannot handle " unifdef-$(CONFIG_FOO) += foo.h. This problem was introduced by commit fb56dbb3 Author: Avi Kivity <avi@qumranet.com> Date: Sun Dec 2 10:50:06 2007 +0200 KVM: Export include/linux/kvm.h only if $ARCH actually supports KVM Currently, make headers_check barfs due to <asm/kvm.h>, which <linux/kvm.h> includes, not existing. Rather than add a zillion <asm/kvm.h>s, export kvm. only if the arch actually supports it. Signed-off-by: NAvi Kivity <avi@qumranet.com> which makes this an 2.6.25 regression. One way of solving the issue is to enhance Kbuild, but Avi and David conviced me, that changing headers_install is not the way to go. This patch changes the definition for linux/kvm.h to unifdef-y. If unifdef-y is used for linux/kvm.h "make headers_check" will fail on all architectures without asm/kvm.h. Therefore, this patch also provides asm/kvm.h on all architectures. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Acked-by: NAvi Kivity <avi@qumranet.com> Cc: Sam Ravnborg <sam@ravnborg.org Cc: David Woodhouse <dwmw2@infradead.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Richard Kennedy 提交于
Code inspection discovered in 2 places timers were being incorrectly setup using round_jiffies_relative(HZ). The timer would then fire at time (0 <= T < HZ). Fix them to use round_jiffies(jiffies + HZ); Signed-off-by: NRichard Kennedy <richard@rsk.demon.co.uk> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Clark Rawlins 提交于
Fixes the keyspan driver after the addition of additional checking of driver requirements introduced in usb-serial.c commit 063a2da8. The initialization of the keyspan usb_serial_driver structs were not initializing the num_interrupt_out field and the additional checking was rejecting the end point so the driver wouldn't finish initializing. This commit initializes the fields to NUM_DONT_CARE. It works for the keyspan USA-49WG and doesn't break the USA-19HS which are the two keyspan devices I have to test with. Signed-off-by: NClark Rawlins <clark.rawlins@escient.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as1062) fixes a bug in the scatter-gather initialization code in the usbtest driver. When the sg-helper conversion was performed, it wasn't done correctly. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> CC: Jens Axboe <axboe@kernel.dk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Brad Sawatzky 提交于
Fixes a bug/inconsistency revealed by the additional sanity checking in commit 063a2da8 introduced in the original 2.6.24 branch. The Handspring Visor / PalmOS 4 device structure defines .num_bulk_out=2 but the usb-serial probe returns num_bulk_out=3, triggering the check in the above commit and forcing a bail out when the device (a Garmin iQue in my case) attempts to connect. The patch bumps the expected number of endpoints to 3. FWIW, this patch will probably solve the following kernel bug report for Treo users (identical symptoms, different model PalmOS units): <http://bugzilla.kernel.org/show_bug.cgi?id=10118> Signed-off-by: NBrad Sawatzky <brad+kernel@swatter.net> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Florian Fainelli 提交于
This patch adds support for the Telegesys ETRX2USB which works fine with the cp2101 driver. Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu> Tested-by: NXavier Carcelle <xavier.carcelle@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Robert Spanton 提交于
The changes introduced in commit 063a2da8 changed the semantics of the num_interrupt_in, num_interrupt_out, num_bulk_in and num_bulk_out entries of the usb_serial_driver struct to be the number of endpoints the device has when probed. This patch changes the ti_1port_device usb_serial_driver struct to reflect this change. The single port devices only have 1 bulk_out endpoint in their initial configuration, and so this patch changes the number of other types to NUM_DONT_CARE. The same change probably needs doing to the ti_2port_device struct, but I don't have a two port device at hand. Signed-off-by: NRobert Spanton <rspanton@zepler.net> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
This patch, suggested by Alan Stern, fixes the hung USB issues on my notebook from suspend/resume cycles. It does so by eliminating some confusion about the internal state machine associated with unlinking from the EHCI async schedule ring, which caused a recent regression: http://bugzilla.kernel.org/show_bug.cgi?id=10345Signed-off-by: NMark Lord <mlord@pobox.com> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: use ->ata_input_data in ide_driveid_update() ide-h8300: 32-bit I/O is unsupported ide/legacy/q40ide.c: add MODULE_LICENSE ide/legacy/macide: add MODULE_LICENSE ide/legacy/falconide.c: add MODULE_LICENSE ide/legacy/buddha.c: add MODULE_LICENSE ide/legacy/gayle.c: add MODULE_LICENSE ide/h8300/ide-h8300.c: add MODULE_LICENSE ide/cris/ide-cris.c: add MODULE_LICENSE ide/arm/ide_arm.c: add MODULE_LICENSE ide/ppc/pmac.c: add MODULE_LICENSE ide/ppc/mpc8xx.c: add MODULE_LICENSE ide/pci/cmd640.c: add MODULE_LICENSE ide-pnp.c: add MODULE_LICENSE
-
Use ->ata_input_data method instead of calling ata_input_data() directly. Currently it matters only for (broken) ide-cris host driver but it may change in the future. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
This host driver doesn't support 32-bit I/O (it sets hwif->INSL/OUTSL to NULL) so IDE_HFLAG_NO_IO_32BIT host flag needs to be set. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Adrian Bunk 提交于
Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Adrian Bunk 提交于
Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Adrian Bunk 提交于
Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Adrian Bunk 提交于
Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Adrian Bunk 提交于
Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Adrian Bunk 提交于
Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Adrian Bunk 提交于
Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Adrian Bunk 提交于
Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Adrian Bunk 提交于
Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Adrian Bunk 提交于
Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Adrian Bunk 提交于
Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-