When testing the ftrace function tracer, I realised that ftrace_caller
and mcount are called from modules and they both call into C, therefore
they need the ABIv2 global entry point to establish r2.
Signed-off-by: NAnton Blanchard <anton@samba.org>

If an assembly function that calls back into c code is exported to
modules, we need to ensure r2 is setup correctly. There are only
two places crazy enough to do it (two of which are my fault).
Signed-off-by: NAnton Blanchard <anton@samba.org>

ELFv2 doesn't use function descriptors, because it doesn't need to
load a new r2 when calling into a function.  On the other hand, you're
supposed to use a local entry point for R_PPC_REL24 branches.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

ELFv2 doesn't need to set up r2 when calling a function.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

In ELFv2, r12 is supposed to equal to PC on entry to a function.
Our stubs use r11, so change swap that with r12.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

ELFv2 uses a different stack offset (24 vs 40) to save r2.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

ELFv2 doesn't use function descriptors, so we don't expect symbols to
start with ".".  But because depmod and modpost strip ".", and we have
the special symbol ".TOC.", we still need to do it.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

The new ELF ABI tends to use R_PPC64_REL16_LO and R_PPC64_REL16_HA
relocations (PC-relative), so implement them.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

The kernel resolved the '.TOC.' to a fake symbol, so we need to fix it up
to point to our .toc section plus 0x8000.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

For the ELFv2 ABI, powerpc introduces a magic symbol ".TOC.".  If we
don't create a CRC for it (minus the leading ".", since we strip that)
we get a modpost warning about missing CRC and the CRC array seems to
be displaced by 1 so other CRCs mismatch too.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

For the ELFv2 ABI, powerpc introduces a magic symbol ".TOC.".  depmod
then complains that this doesn't resolve (so does modpost, but we could
easily fix that).  To export this, we need to use asm.

modpost and depmod both strip "." from symbols for the old PPC64 ELFv1
ABI, so we actually export a "TOC.".
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

By representing them as words, rather than chars, we can avoid
endian ifdefs.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Don't try and dereference a function descriptor on ABIv2.
Signed-off-by: NAnton Blanchard <anton@samba.org>

There is no need to put a function descriptor in
__secondary_hold_spinloop. Use ppc_function_entry to get the
instruction address and put it in __secondary_hold_spinloop instead.

Also fix an issue where we assumed cur_cpu_spec held a function
descriptor.
Signed-off-by: NAnton Blanchard <anton@samba.org>

TRACE_WITH_FRAME_BUFFER creates 32 byte stack frames. On ppc64
ABIv1 this is too small and a callee could corrupt the stack by
writing to the parameter save area (starting at offset 48).
Signed-off-by: NAnton Blanchard <anton@samba.org>

The r2 TOC/GOT save offset is 40 on ABIv1 and 24 on ABIv2.
Signed-off-by: NAnton Blanchard <anton@samba.org>

Get rid of the tm specific STACK_PARAM and use STK_PARAM
Signed-off-by: NAnton Blanchard <anton@samba.org>

Some of the assembler files in lib/ make use of the fact that in the
ELFv1 ABI, the caller guarantees to provide stack space to save the
parameter registers r3 ... r10.  This guarantee is no longer present
in ELFv2 for functions that have no variable argument list and no
more than 8 arguments.

Change the affected routines to temporarily store registers in the
red zone and/or the top of their own stack frame (in the space
provided to save r31 .. r29, which is actually not used in these
routines).

In opal_query_takeover, simply always allocate a stack frame;
the routine is not performance critical.
Signed-off-by: NUlrich Weigand <ulrich.weigand@de.ibm.com>
Signed-off-by: NAnton Blanchard <anton@samba.org>

Fix STK_PARAM and use it instead of hardcoding ABIv1 offsets.
Signed-off-by: NAnton Blanchard <anton@samba.org>

Change how we setup registers for ret_from_kernel_thread. In
ABIv1, instead of passing a function descriptor in, dereference
it and pass the target in directly.

Use ppc_global_function_entry to get it right on both ABIv1 and ABIv2.
Signed-off-by: NAnton Blanchard <anton@samba.org>

The MMU hashtable and SLB branch patching code uses function
pointers for the update sites. This creates a difference between
ABIv1 and ABIv2 because we don't have function descriptors on
ABIv2.

Get rid of the function pointer and just point at the update
sites directly. This works on both ABIs.
Signed-off-by: NAnton Blanchard <anton@samba.org>

Replace FUNCTION_TEXT with ppc_function_entry which can handle both
ABIv1 and ABIv2.
Signed-off-by: NAnton Blanchard <anton@samba.org>

Skip over the well known global entry point code for ABIv2.
Signed-off-by: NAnton Blanchard <anton@samba.org>

The linker fixes up .TOC. relocations, so prom_init_check.sh should
ignore them.
Signed-off-by: NAnton Blanchard <anton@samba.org>

To establish addressability quickly, ABIv2 requires the target
address of the function being called to be in r12. Fix a number of
places in assembly code that we do indirect function calls.

We need to avoid function descriptors on ABIv2 too.
Signed-off-by: NAnton Blanchard <anton@samba.org>

ABIv2 doesn't have function descriptors or dot symbols. One
new thing it does add is a function global and a local entry
point, so add that to our _GLOBAL macro.
Signed-off-by: NAnton Blanchard <anton@samba.org>

There are a few places we have to use dot symbols with the
current ABI - the syscall table and the kvm hcall table.

Wrap both of these with a new macro called DOTSYM so it will
be easy to transition away from dot symbols in a future ABI.
Signed-off-by: NAnton Blanchard <anton@samba.org>

STD_EXCEPTION_COMMON, STD_EXCEPTION_COMMON_ASYNC and
MASKABLE_EXCEPTION branch to the handler, so we can remove
the explicit dot symbol and binutils will do the right thing.
Signed-off-by: NAnton Blanchard <anton@samba.org>

Now there are no users of _INIT_GLOBAL(), _STATIC() and _INIT_STATIC()
we can remove them.
Signed-off-by: NAnton Blanchard <anton@samba.org>

There is no need to create a function descriptor for functions
called locally out of assembly.
Signed-off-by: NAnton Blanchard <anton@samba.org>

There is no need to create a function descriptor for the system call
table. By using one we force the system call table into the text
section and it really belongs in the rodata section.

This also removes another use of dot symbols.
Signed-off-by: NAnton Blanchard <anton@samba.org>

We have a number of places where we load the text address of a local
function and indirectly branch to it in assembly. Since it is an
indirect branch binutils will not know to use the function text
address, so that trick wont work.

There is no need for these functions to have a function descriptor
so we can replace it with a label and remove the dot symbol.
Signed-off-by: NAnton Blanchard <anton@samba.org>

binutils is smart enough to know that a branch to a function
descriptor is actually a branch to the functions text address.

Alan tells me that binutils has been doing this for 9 years.
Signed-off-by: NAnton Blanchard <anton@samba.org>

We avoid ABIv2 when building c files since commit b2ca8c89 (powerpc:
Don't use ELFv2 ABI to build the kernel). Do the same for assembly
files.
Signed-off-by: NAnton Blanchard <anton@samba.org>

Pull slave-dmaengine fixes from Vinod Koul:
 "Back from long weekend here in India and now the time to send fixes
  for slave dmaengine.
   - Dan's fix of sirf xlate code
   - Jean's fix for timberland
   - edma fixes by Sekhar for SG handling and Yuan for changing init
     call"

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dma: fix eDMA driver as a subsys_initcall
  dmaengine: sirf: off by one in of_dma_sirfsoc_xlate()
  platform: Fix timberdale dependencies
  dma: edma: fix incorrect SG list handling

Pull iommu fixes from Joerg Roedel:
 "Fixes for regressions:

   - fix wrong IOMMU enumeration causing some SCSI device drivers
     initialization failures
   - ARM-SMMU fixes for a panic condition and a wrong return value"

* tag 'iommu-fixes-v3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/arm-smmu: fix panic in arm_smmu_alloc_init_pte
  iommu/arm-smmu: Return 0 on unmap failure
  iommu/vt-d: fix bug in matching PCI devices with DRHD/RMRR descriptors
  iommu/vt-d: Fix get_domain_for_dev() handling of upstream PCIe bridges
  iommu/vt-d: fix memory leakage caused by commit ea8ea460

Pull perf tooling fixes from Ingo Molnar:
 "Three small tooling fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf tools: Improve error reporting
  perf tools: Adjust symbols in VDSO
  perf kvm: Fix 'Min time' counting in report command

Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf into perf/urgent

Pull perf/urgent fixes from Jiri Olsa:

User visible changes:

  * Adjust symbols in VDSO to properly resolve its function names (Vladimir Nikulichev)

  * Improve error reporting for record session failure (Adrien BAK)

  * Fix 'Min time' counting in report command (Alexander Yarygin)
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>