- 17 2月, 2011 1 次提交
-
-
由 Ingo Molnar 提交于
Merge branch 'tip/perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/core
-
- 16 2月, 2011 36 次提交
-
-
由 Peter Zijlstra 提交于
There is no need to re-initialize the hrtimer every time we start it, so don't do that (shaves a few cycles). Also, since we know hrtimers run at a fixed rate (nanoseconds) we can pre-compute the desired frequency at which they tick. This avoids us having to go through the whole adaptive frequency feedback logic (shaves another few cycles). Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1297448589.5226.47.camel@laptop> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
By pre-computing the maximum number of samples per tick we can avoid a multiplication and a conditional since MAX_INTERRUPTS > max_samples_per_tick. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Robert Richter 提交于
This patch adds support for AMD family 15h core counters. There are major changes compared to family 10h. First, there is a new perfctr msr range for up to 6 counters. Northbridge counters are separate now. This patch only adds support for core counters. Second, certain events may only be scheduled on certain counters. For this we need to extend the event scheduling and constraints. We use cpu feature flags to calculate family 15h msr address offsets. This way we later can implement a faster ALTERNATIVE() version for this. Signed-off-by: NRobert Richter <robert.richter@amd.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20110215135210.GB5874@erda.amd.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Robert Richter 提交于
Instead of storing the base addresses we can store the counter's msr addresses directly in config_base/event_base of struct hw_perf_event. This avoids recalculating the address with each msr access. The addresses are configured one time. We also need this change to later modify the address calculation. Signed-off-by: NRobert Richter <robert.richter@amd.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1296664860-10886-5-git-send-email-robert.richter@amd.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Robert Richter 提交于
This patch allows the reservation of perfctrs with new msr addresses introduced for AMD cpu family 15h (0xc0010200/0xc0010201, etc). Signed-off-by: NRobert Richter <robert.richter@amd.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1296664860-10886-4-git-send-email-robert.richter@amd.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Robert Richter 提交于
This patch adds helper functions to calculate perfctr msr addresses. We need this to later add support for AMD family 15h cpus. For this we have to change the algorithms to generate the perfctr's msr addresses. Signed-off-by: NRobert Richter <robert.richter@amd.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1296664860-10886-3-git-send-email-robert.richter@amd.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Robert Richter 提交于
Use helper function in x86_pmu_enable_all() to minimize access to x86_pmu.eventsel in the fast path. The counter's msr address is now calculated using struct hw_perf_event. Later we add code that calculates the msr addresses with a table lookup which shouldn't be done in the fast path. Signed-off-by: NRobert Richter <robert.richter@amd.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1296664860-10886-2-git-send-email-robert.richter@amd.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Stephane Eranian 提交于
This patch adds the ability to filter monitoring based on container groups (cgroups) for both perf stat and perf record. It is possible to monitor multiple cgroup in parallel. There is one cgroup per event. The cgroups to monitor are passed via a new -G option followed by a comma separated list of cgroup names. The cgroup filesystem has to be mounted. Given a cgroup name, the perf tool finds the corresponding directory in the cgroup filesystem and opens it. It then passes that file descriptor to the kernel. Example: $ perf stat -B -a -e cycles:u,cycles:u,cycles:u -G test1,,test2 -- sleep 1 Performance counter stats for 'sleep 1': 2,368,667,414 cycles test1 2,369,661,459 cycles <not counted> cycles test2 1.001856890 seconds time elapsed Signed-off-by: NStephane Eranian <eranian@google.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4d590290.825bdf0a.7d0a.4890@mx.google.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Stephane Eranian 提交于
This kernel patch adds the ability to filter monitoring based on container groups (cgroups). This is for use in per-cpu mode only. The cgroup to monitor is passed as a file descriptor in the pid argument to the syscall. The file descriptor must be opened to the cgroup name in the cgroup filesystem. For instance, if the cgroup name is foo and cgroupfs is mounted in /cgroup, then the file descriptor is opened to /cgroup/foo. Cgroup mode is activated by passing PERF_FLAG_PID_CGROUP in the flags argument to the syscall. For instance to measure in cgroup foo on CPU1 assuming cgroupfs is mounted under /cgroup: struct perf_event_attr attr; int cgroup_fd, fd; cgroup_fd = open("/cgroup/foo", O_RDONLY); fd = perf_event_open(&attr, cgroup_fd, 1, -1, PERF_FLAG_PID_CGROUP); close(cgroup_fd); Signed-off-by: NStephane Eranian <eranian@google.com> [ added perf_cgroup_{exit,attach} ] Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4d590250.114ddf0a.689e.4482@mx.google.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Make the ::exit method act like ::attach, it is after all very nearly the same thing. The bug had no effect on correctness - fixing it is an optimization for the scheduler. Also, later perf-cgroups patches rely on it. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NPaul Menage <menage@google.com> LKML-Reference: <1297160655.13327.92.camel@laptop> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Merge reason: we need to queue up dependent patch Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
It was possible to call pmu::start() on an already running event. In particular this lead so some wreckage as the hrtimer events would re-initialize active timers. This was due to throttled events being activated again by scheduling. Scheduling in a context would add and force start events, resulting in running events with a possible throttle status. The next tick to hit that task will then try to unthrottle the event and call ->start() on an already running event. Reported-by: NJeff Moyer <jmoyer@redhat.com> Cc: <stable@kernel.org> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Cyrill Gorcunov 提交于
Several people have reported spurious unknown NMI messages on some P4 CPUs. This patch fixes it by checking for an overflow (negative counter values) directly, instead of relying on the P4_CCCR_OVF bit. Reported-by: NGeorge Spelvin <linux@horizon.com> Reported-by: NMeelis Roos <mroos@linux.ee> Reported-by: NDon Zickus <dzickus@redhat.com> Reported-by: NDave Airlie <airlied@gmail.com> Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org> Cc: Lin Ming <ming.m.lin@intel.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <AANLkTinfuTfCck_FfaOHrDqQZZehtRzkBum4SpFoO=KJ@mail.gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: set flow handler for secondary interrupt controller of 5249 m68knommu: remove use of IRQ_FLG_LOCK from 68360 platform support m68knommu: fix dereference of port.tty m68knommu: add missing linker __modver section m68knommu: fix mis-named variable int set_irq_chip loop m68knommu: add optimize memmove() function m68k: remove arch specific non-optimized memcmp() m68knommu: fix use of un-defined _TIF_WORK_MASK m68knommu: Rename m548x_wdt.c to m54xx_wdt.c m68knommu: fix m548x_wdt.c compilation after headers renaming m68knommu: Remove dependencies on nonexistent M68KNOMMU
-
由 Greg Ungerer 提交于
The secondary interrupt controller of the ColdFire 5249 code is not setting the edge triggered flow handler. Set it. Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 Greg Ungerer 提交于
The m68knommu arch does not define or use IRQ_FLG_LOCK in its irq subsystem. Remove obsolete use of it. Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 Greg Ungerer 提交于
The struct_tty associated with a port is now a direct pointer from within the local private driver info struct. So fix all uses of it. Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 Greg Ungerer 提交于
Add missing linker section __modver to fix: LD vmlinux /usr/local/bin/../m68k-uclinux/bin/ld.real: error: no memory region specified for loadable section `__modver' Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 Greg Ungerer 提交于
Compiling for 68360 targets gives: CC arch/m68knommu/platform/68360/ints.o arch/m68knommu/platform/68360/ints.c: In function ‘init_IRQ’: arch/m68knommu/platform/68360/ints.c:135:16: error: ‘irq’ undeclared (first use in this function) arch/m68knommu/platform/68360/ints.c:135:16: note: each undeclared identifier is reported only once for each function it appears in Fix variable name used. Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 Greg Ungerer 提交于
Add an m68k/coldfire optimized memmove() function for the m68knommu arch. This is the same function as used by m68k. Simple speed tests show this is faster once buffers are larger than 4 bytes, and significantly faster on much larger buffers (4 times faster above about 100 bytes). This also goes part of the way to fixing a regression caused by commit ea61bc46 ("m68k/m68knommu: merge MMU and non-MMU string.h"), which breaks non-coldfire non-mmu builds (which is the 68x328 and 68360 families). They currently have no memmove() fucntion defined, since there was none in the m68knommu/lib functions. Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 Greg Ungerer 提交于
The m68k arch implements its own memcmp() function. It is not optimized in any way (it is the most strait forward coding of memcmp you can get). Remove it and use the kernels standard memcmp() implementation. This also goes part of the way to fixing a regression caused by commit ea61bc46 ("m68k/m68knommu: merge MMU and non-MMU string.h"), which breaks non-coldfire non-mmu builds (which is the 68x328 and 68360 families). They currently have no memcmp() function defined, since there is none in the m68knommu/lib functions. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (27 commits) drm/radeon/kms: hopefully fix pll issues for real (v3) drm/radeon/kms: add bounds checking to avivo pll algo drm: fix wrong usages of drm_device in DRM Developer's Guide drm/radeon/kms: fix a few more atombios endian issues drm/radeon/kms: improve 6xx/7xx CS error output drm/radeon/kms: check AA resolve registers on r300 drm/radeon/kms: fix tracking of BLENDCNTL, COLOR_CHANNEL_MASK, and GB_Z on r300 drm/radeon/kms: use linear aligned for evergreen/ni bo blits drm/radeon/kms: use linear aligned for 6xx/7xx bo blits drm/radeon: fix race between GPU reset and TTM delayed delete thread. drm/radeon/kms: evergreen/ni big endian fixes (v2) drm/radeon/kms: 6xx/7xx big endian fixes drm/radeon/kms: atombios big endian fixes drm/radeon: 6xx/7xx non-kms endian fixes drm/radeon/kms: optimize CS state checking for r100->r500 drm: do not leak kernel addresses via /proc/dri/*/vma drm/radeon/kms: add connector table for mac g5 9600 radeon mkregtable: Add missing fclose() calls drm/radeon/kms: fix interlaced modes on dce4+ drm/radeon: fix memory debugging since d961db75 ...
-
由 Linus Torvalds 提交于
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: pci: use security_capable() when checking capablities during config space read
-
由 Andrea Arcangeli 提交于
Transparent hugepages can only be created if rmap is fully functional. So we must prevent hugepages to be created while is_vma_temporary_stack() is true. This also optmizes away some harmless but unnecessary setting of khugepaged_scan.address and it switches some BUG_ON to VM_BUG_ON. Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com> Acked-by: NRik van Riel <riel@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI / Video: Probe for output switch method when searching video devices. ACPI / Wakeup: Enable button GPEs unconditionally during initialization ACPI / ACPICA: Avoid crashing if _PRW is defined for the root object ACPI: Fix acpi_os_read_memory() and acpi_os_write_memory() (v2)
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6由 Linus Torvalds 提交于
* 'tools-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6: tools: turbostat: style updates tools: turbostat: fix bitwise and operand
-
由 Len Brown 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx由 Linus Torvalds 提交于
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (21 commits) dmaengine: add slave-dma maintainer dma: ipu_idmac: do not lose valid received data in the irq handler dmaengine: imx-sdma: fix up param for the last BD in sdma_prep_slave_sg() dmaengine: imx-sdma: correct sdmac->status in sdma_handle_channel_loop() dmaengine: imx-sdma: return sdmac->status in sdma_tx_status() dmaengine: imx-sdma: set sdmac->status to DMA_ERROR in err_out of sdma_prep_slave_sg() dmaengine: imx-sdma: remove IMX_DMA_SG_LOOP handling in sdma_prep_slave_sg() dmaengine i.MX dma: initialize dma capabilities outside channel loop dmaengine i.MX DMA: do not initialize chan_id field dmaengine i.MX dma: check sg entries for valid addresses and lengths dmaengine i.MX dma: set maximum segment size for our device dmaengine i.MX SDMA: reserve channel 0 by not registering it dmaengine i.MX SDMA: initialize dma capabilities outside channel loop dmaengine i.MX SDMA: do not initialize chan_id field dmaengine i.MX sdma: check sg entries for valid addresses and lengths dmaengine i.MX sdma: set maximum segment size for our device DMA: PL08x: fix channel pausing to timeout rather than lockup DMA: PL08x: fix infinite wait when terminating transfers dmaengine: imx-sdma: fix inconsistent naming in sdma_assign_cookie() dmaengine: imx-sdma: propagate error in sdma_probe() instead of returning 0 ...
-
git://linux-nfs.org/~bfields/linux由 Linus Torvalds 提交于
* 'for-2.6.38' of git://linux-nfs.org/~bfields/linux: nfsd: break lease on unlink due to rename nfsd4: acquire only one lease per file nfsd4: modify fi_delegations under recall_lock nfsd4: remove unused deleg dprintk's. nfsd4: split lease setting into separate function nfsd4: fix leak on allocation error nfsd4: add helper function for lease setup nfsd4: split up nfsd_break_deleg_cb NFSD: memory corruption due to writing beyond the stat array NFSD: use nfserr for status after decode_cb_op_status nfsd: don't leak dentry count on mnt_want_write failure
-
由 Linus Torvalds 提交于
Merge branches 'core-fixes-for-linus' and 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: Revert "lockdep, timer: Fix del_timer_sync() annotation" * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: timer debug: Hide kernel addresses via %pK in /proc/timer_list
-
由 Linus Torvalds 提交于
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Fix text_poke_smp_batch() deadlock perf tools: Fix thread_map event synthesizing in top and record watchdog, nmi: Lower the severity of error messages ARM: oprofile: Fix backtraces in timer mode oprofile: Fix usage of CONFIG_HW_PERF_EVENTS for oprofile_perf_init and friends
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, dmi, debug: Log board name (when present) in dmesg/oops output x86, ioapic: Don't warn about non-existing IOAPICs if we have none x86: Fix mwait_usable section mismatch x86: Readd missing irq_to_desc() in fixup_irq() x86: Fix section mismatch in LAPIC initialization
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: matrix_keypad - increase the limit of rows and columns Input: wacom - fix error path in wacom_probe() Input: ads7846 - check proper condition when freeing gpio Revert "Input: do not pass injected events back to the originating handler" Input: sysrq - rework re-inject logic Input: serio - clear pending rescans after sysfs driver rebind Input: rotary_encoder - use proper irqflags Input: wacom_w8001 - report resolution to userland
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: get rid of nameidata_dentry_drop_rcu() calling nameidata_drop_rcu() drop out of RCU in return_reval split do_revalidate() into RCU and non-RCU cases in do_lookup() split RCU and non-RCU cases of need_revalidate nothing in do_follow_link() is going to see RCU
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: check return value of alloc_extent_map() Btrfs - Fix memory leak in btrfs_init_new_device() btrfs: prevent heap corruption in btrfs_ioctl_space_info() Btrfs: Fix balance panic Btrfs: don't release pages when we can't clear the uptodate bits Btrfs: fix page->private races
-
- 15 2月, 2011 3 次提交
-
-
由 Martin Schwidefsky 提交于
task_show_regs used to be a debugging aid in the early bringup days of Linux on s390. /proc/<pid>/status is a world readable file, it is not a good idea to show the registers of a process. The only correct fix is to remove task_show_regs. Reported-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Chris Wright 提交于
This reintroduces commit 47970b1b which was subsequently reverted as f00eaeea. The original change was broken and caused X startup failures and generally made privileged processes incapable of reading device dependent config space. The normal capable() interface returns true on success, but the LSM interface returns 0 on success. This thinko is now fixed in this patch, and has been confirmed to work properly. So, once again...Eric Paris noted that commit de139a33 ("pci: check caps from sysfs file open to read device dependent config space") caused the capability check to bypass security modules and potentially auditing. Rectify this by calling security_capable() when checking the open file's capabilities for config space reads. Reported-by: NEric Paris <eparis@redhat.com> Tested-by: NDave Young <hidave.darkstar@gmail.com> Acked-by: NJames Morris <jmorris@namei.org> Cc: Dave Airlie <airlied@gmail.com> Cc: Alex Riesen <raa.lkml@gmail.com> Cc: Sedat Dilek <sedat.dilek@googlemail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NChris Wright <chrisw@sous-sol.org> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Al Viro 提交于
can't happen anymore and didn't work right anyway Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-