This patch adds the possibilty to read-lock an extent even if it is already
write-locked from the same thread. btrfs_find_all_roots() needs this
capability.
Signed-off-by: NArne Jansen <sensille@gmx.net>
Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>

Commit 4a54c8c1 introduced raid-repair, killing the individual
readpage_io_failed_hook entries from inode.c and disk-io.c. Commit
4bb31e92 introduced new readahead code, adding a readpage_io_failed_hook to
disk-io.c.

The raid-repair commit had logic to disable raid-repair, if
readpage_io_failed_hook is set. Thus, the readahead commit effectively
disabled raid-repair for meta data.

This commit changes the logic to always attempt raid-repair when needed and
call the readpage_io_failed_hook in case raid-repair fails. This is much
more straight forward and should have been like that from the beginning.
Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>
Reported-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

We've been hitting BUG()'s in btrfs_cont_expand and btrfs_fallocate and anywhere
else that calls btrfs_get_extent while running xfstests 13 in a loop.  This is
because fiemap is calling btrfs_get_extent with non-sectorsize aligned offsets,
which will end up adding mappings that are not sectorsize aligned, which will
cause problems in some cases for subsequent calls to btrfs_get_extent for
similar areas that are sectorsize aligned.  With this patch I ran xfstests 13 in
a loop for a couple of hours and didn't hit the problem that I could previously
hit in at most 20 minutes.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

My previous patch introduced some u64 for failed_mirror variables, this one
makes it consistent again.
Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

 This patch casts to unsigned long before casting to a pointer and fixes
 the following warnings:
fs/btrfs/extent_io.c:2289:20: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
fs/btrfs/ioctl.c:2933:37: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
fs/btrfs/ioctl.c:2937:21: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
fs/btrfs/ioctl.c:3020:21: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
fs/btrfs/scrub.c:275:4: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
fs/btrfs/backref.c:686:27: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Failure testing was tripping up over stale PageError bits in
metadata pages.  If we have an io error on a block, and later on
end up reusing it, nobody ever clears PageError on those pages.

During commit, we'll find PageError and think we had trouble writing
the block, which will lead to aborts and other problems.

This changes clean_tree_block and the btrfs writepage code to
clear the PageError bit.  In both cases we're either completely
done with the page or the page has good stuff and the error bit
is no longer valid.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

write_cache_pages tries to build up a large bio to stuff down the pipe.
But if it needs to wait for a page lock, it needs to make sure and send
down any pending writes so we don't deadlock with anyone who has the
page lock and is waiting for writeback of things inside the bio.

Dave Sterba triggered this as a deadlock between the autodefrag code and
the extent write_cache_pages
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com>

If I have a range where I know a certain bit is and I want to set it to another
bit the only option I have is to call set and then clear bit, which will result
in 2 tree searches.  This is inefficient, so introduce convert_extent_bit which
will go through and set the bit I want and clear the old bit I don't want.
Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

We always look for delalloc bytes in our io_tree so we can fill in delalloc.
This is fine in most cases, but if we're writing out the btree_inode this is
just a superfluous tree search on the io_tree, and if we have a lot of metadata
dirty this could be an expensive check.  So instead check to see if our io_tree
has a ->fill_delalloc op, and if not don't even bother doing the lookup.
Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

This adds the hooks needed for readahead. In the readpage_end_io_hook,
the extent state is checked for the EXTENT_READAHEAD flag. Only in this
case the readahead hook is called, to keep the impact on non-ra as low
as possible.
Additionally, a hook for a failed IO is added, otherwise readahead would
wait indefinitely for the extent to finish.

Changes for v2:
 - eliminate race condition
Signed-off-by: NArne Jansen <sensille@gmx.net>

read_extent_buffer_pages currently has two modes, either trigger a read
without waiting for anything, or wait for the I/O to finish. The former
also bails when it's unable to lock the page. This patch now adds an
additional parameter to allow it to block on page lock, but don't wait
for completion.

Changes v5:
 - merge the 2 wait parameters into one and define WAIT_NONE, WAIT_COMPLETE and
   WAIT_PAGE_LOCK

Change v6:
 - fix bug introduced in v5
Signed-off-by: NArne Jansen <sensille@gmx.net>

The raid-retry code in inode.c can be generalized so that it works for
metadata as well. Thus, this patch moves it to extent_io.c and makes the
raid-retry code a raid-repair code.

Repair works that way: Whenever a read error occurs and we have more
mirrors to try, note the failed mirror, and retry another. If we find a
good one, check if we did note a failure earlier and if so, do not allow
the read to complete until after the bad sector was written with the good
data we just fetched. As we have the extent locked while reading, no one
can change the data in between.
Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>

Currently, extent_read_full_page always assumes we are trying to read mirror
0, which generally is the best we can do. To add flexibility, pass it as a
parameter. This will be needed by scrub fixup code.
Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>

When doing a writepage we call writepages to try and write out any other dirty
pages in the area.  This could cause problems where we commit a transaction and
then have somebody else dirtying metadata in the area as we could end up writing
out a lot more than we care about, which could cause latency on anybody who is
waiting for the transaction to completely finish committing.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

find_first_extent_bit() and find_first_extent_bit_state() share
most of the code, and we can just make the former call the latter.
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

We can just use cond_resched_lock().
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Don't duplicate set_state_bits().
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The set/clear bit and the extent split/merge hooks only ever return 0.

 Changing them to return void simplifies the error handling cases later.

 This patch changes the hook prototypes, the single implementation of each,
 and the functions that call them to return void instead.

 Since all four of these hooks execute under a spinlock, they're necessarily
 simple.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

For metadata buffers that don't straddle pages (all of them), btrfs
can safely use the page uptodate bits and extent_buffer uptodate bit
instead of needing to use the extent_state tree.

This greatly reduces contention on the state tree lock.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The btrfs metadata btree is the source of significant
lock contention, especially in the root node.   This
commit changes our locking to use a reader/writer
lock.

The lock is built on top of rw spinlocks, and it
extends the lock tracking to remember if we have a
read lock or a write lock when we go to blocking.  Atomics
count the number of blocking readers or writers at any
given time.

It removes all of the adaptive spinning from the old code
and uses only the spinning/blocking hints inside of btrfs
to decide when it should continue spinning.

In read heavy workloads this is dramatically faster.  In write
heavy workloads we're still faster because of less contention
on the root node lock.

We suffer slightly in dbench because we schedule more often
during write locks, but all other benchmarks so far are improved.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The extent_buffers have a very complex interface where
we use HIGHMEM for metadata and try to cache a kmap mapping
to access the memory.

The next commit adds reader/writer locks, and concurrent use
of this kmap cache would make it even more complex.

This commit drops the ability to use HIGHMEM with extent buffers,
and rips out all of the related code.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Everybody else does this, we need to do it too.  If we're syncing, we need to
tag the pages we're going to write for writeback so we don't end up writing the
same stuff over and over again if somebody is constantly redirtying our file.
This will keep us from having latencies with heavy sync workloads.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

First, we can sometimes free the state we're merging, which means anybody who
calls merge_state() may have the state it passed in free'ed.  This is
problematic because we could end up caching the state, which makes caching
useless as the state will no longer be part of the tree.  So instead of free'ing
the state we passed into merge_state(), set it's end to the other->end and free
the other state.  This way we are sure to cache the correct state.  Also because
we can merge states together, instead of only using the cache'd state if it's
start == the start we are looking for, go ahead and use it if the start we are
looking for is within the range of the cached state.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

Pass struct wb_writeback_work all the way down to writeback_sb_inodes(),
and initialize the struct writeback_control there.

struct writeback_control is basically designed to control writeback of a
single file, but we keep abuse it for writing multiple files in
writeback_sb_inodes() and its callers.

It immediately clean things up, e.g. suddenly wbc.nr_to_write vs
work->nr_pages starts to make sense, and instead of saving and restoring
pages_skipped in writeback_sb_inodes it can always start with a clean
zero value.

It also makes a neat IO pattern change: large dirty files are now
written in the full 4MB writeback chunk size, rather than whatever
remained quota in wbc->nr_to_write.
Acked-by: NJan Kara <jack@suse.cz>
Proposed-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>

The btrfs releasepage function depends on ENOMEM coming
back when it is called atomic.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This sixth patch of eight in this cleancache series "opts-in"
cleancache for btrfs.  Filesystems must explicitly enable
cleancache by calling cleancache_init_fs anytime an instance
of the filesystem is mounted.  Btrfs uses its own readpage
which must be hooked, but all other cleancache hooks are in
the VFS layer including the matching cleancache_flush_fs hook
which must be called on unmount.

Details and a FAQ can be found in Documentation/vm/cleancache.txt

[v6-v8: no changes]
[v5: jeremy@goop.org: simplify init hook and any future fs init changes]
Signed-off-by: NDan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>
Reviewed-by: NJeremy Fitzhardinge <jeremy@goop.org>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik Van Riel <riel@redhat.com>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Andreas Dilger <adilger@sun.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Nitin Gupta <ngupta@vflare.org>

merge_state can free the current state if it can be merged with the next node,
but in set_extent_bit(), after merge_state, we still use the current extent to
get the next node and cache it into cached_state
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

It doesn't allocate extent_state and check the result properly:
- in set_extent_bit, it doesn't allocate extent_state if the path is not
  allowed wait

- in clear_extent_bit, it doesn't check the result after atomic-ly allocate,
  we trigger BUG_ON() if it's fail

- if allocate fail, we trigger BUG_ON instead of returning -ENOMEM since
  the return value of clear_extent_bit() is ignored by many callers
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

In count_range_bits we are adjusting total_bytes based on the range we are
searching for, but we don't adjust the range start according to the range we are
searching for, which makes for weird results.  For example, if the range

[0-8192]

is set DELALLOC, but I search for 4096-8192, I will get back 4096 for the number
of bytes found, but the range_start will be 0, which makes it look like the
range is [0-4096].  So instead set range_start = max(cur_start, state->start).
This makes everything come out right.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

Commit e66eed65 ("list: remove prefetching from regular list
iterators") removed the include of prefetch.h from list.h, which
uncovered several cases that had apparently relied on that rather
obscure header file dependency.

So this fixes things up a bit, using

   grep -L linux/prefetch.h $(git grep -l '[^a-z_]prefetchw*(' -- '*.[ch]')
   grep -L 'prefetchw*(' $(git grep -l 'linux/prefetch.h' -- '*.[ch]')

to guide us in finding files that either need <linux/prefetch.h>
inclusion, or have it despite not needing it.

There are more of them around (mostly network drivers), but this gets
many core ones.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove static and global declarations and/or definitions. Reduces size
of btrfs.ko by ~3.4kB.

  text    data     bss     dec     hex filename
402081    7464     200  409745   64091 btrfs.ko.base
398620    7144     200  405964   631cc btrfs.ko.remove-all
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

pass GFP_NOFS directly to kmem_cache_alloc
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

pass GFP_NOFS directly to kmem_cache_alloc
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

all callers pass GFP_NOFS, but the GFP mask argument is not used in the
function; GFP_ATOMIC is passed to radix tree initialization and it's the
only correct one, since we're using the preload/insert mechanism of
radix tree.
Let's drop the gfp mask from btrfs function, this will not change
behaviour.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

use IS_ERR_OR_NULL when possible, done by this coccinelle script:

@ match @
identifier id;
@@
(
- BUG_ON(IS_ERR(id) || !id);
+ BUG_ON(IS_ERR_OR_NULL(id));
|
- IS_ERR(id) || !id
+ IS_ERR_OR_NULL(id)
|
- !id || IS_ERR(id)
+ IS_ERR_OR_NULL(id)
)
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

reported by gcc -Wshadow:
page_index, page_offset, new_inode, dev_name
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

the space cache use extent_readpages() to read free space information,
so we can not use GFP_KERNEL flag to allocate memory, or it may lead
to deadlock.
Signed-off-by: NItaru Kitayama <kitayama@cl.bb4u.ne.jp>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

There's a potential problem in 32bit system when we exhaust 32bit inode
numbers and start to allocate big inode numbers, because btrfs uses
inode->i_ino in many places.

So here we always use BTRFS_I(inode)->location.objectid, which is an
u64 variable.

There are 2 exceptions that BTRFS_I(inode)->location.objectid !=
inode->i_ino: the btree inode (0 vs 1) and empty subvol dirs (256 vs 2),
and inode->i_ino will be used in those cases.

Another reason to make this change is I'm going to use a special inode
to save free ino cache, and the inode number must be > (u64)-256.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>

A recent commit caches the extent state in end_bio_extent_readpage,
but the search it does should look for locked extents.  This
fixes things to make it more effective.
Signed-off-by: NChris Mason <chris.mason@oracle.com>