- 26 8月, 2013 1 次提交
-
-
由 Hannes Frederic Sowa 提交于
In commit 0ea9d5e3 ("xfrm: introduce helper for safe determination of mtu") I switched the determination of ipv4 mtus from dst_mtu to ip_skb_dst_mtu. This was an error because in case of IP_PMTUDISC_PROBE we fall back to the interface mtu, which is never correct for ipv4 ipsec. This patch partly reverts 0ea9d5e3 ("xfrm: introduce helper for safe determination of mtu"). Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
- 19 8月, 2013 3 次提交
-
-
由 Hannes Frederic Sowa 提交于
We need to choose the protocol family by skb->protocol. Otherwise we call the wrong xfrm{4,6}_local_error handler in case an ipv6 sockets is used in ipv4 mode, in which case we should call down to xfrm4_local_error (ip6 sockets are a superset of ip4 ones). We are called before before ip_output functions, so skb->protocol is not reset. Cc: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
由 Hannes Frederic Sowa 提交于
In xfrm6_local_error use inner_header if the packet was encapsulated. Cc: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
由 Hannes Frederic Sowa 提交于
When pushing a new header before current one call skb_reset_inner_headers to record the position of the inner headers in the various ipv6 tunnel protocols. We later need this to correctly identify the addresses needed to send back an error in the xfrm layer. This change is safe, because skb->protocol is always checked before dereferencing data from the inner protocol. Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
- 14 8月, 2013 14 次提交
-
-
由 Hannes Frederic Sowa 提交于
skb->sk socket can be of AF_INET or AF_INET6 address family. Thus we always have to make sure we a referring to the correct interpretation of skb->sk. We only depend on header defines to query the mtu, so we don't introduce a new dependency to ipv6 by this change. Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
由 Hannes Frederic Sowa 提交于
In xfrm4 and xfrm6 we need to take care about sockets of the other address family. This could happen because a 6in4 or 4in6 tunnel could get protected by ipsec. Because we don't want to have a run-time dependency on ipv6 when only using ipv4 xfrm we have to embed a pointer to the correct local_error function in xfrm_state_afinet and look it up when returning an error depending on the socket address family. Thanks to vi0ss for the great bug report: <https://bugzilla.kernel.org/show_bug.cgi?id=58691> v2: a) fix two more unsafe interpretations of skb->sk as ipv6 socket (xfrm6_local_dontfrag and __xfrm6_output) v3: a) add an EXPORT_SYMBOL_GPL(xfrm_local_error) to fix a link error when building ipv6 as a module (thanks to Steffen Klassert) Reported-by: <vi0oss@gmail.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
由 Weiping Pan 提交于
Since we set "len = total_len" in the beginning of tun_get_user(), so we should compare the new len with 0, instead of total_len, or the if statement always returns false. Signed-off-by: NWeiping Pan <wpan@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Asbjoern Sloth Toennesen 提交于
Fix the iproute2 command `bridge vlan show`, after switching from rtgenmsg to ifinfomsg. Let's start with a little history: Feb 20: Vlad Yasevich got his VLAN-aware bridge patchset included in the 3.9 merge window. In the kernel commit 6cbdceeb, he added attribute support to bridge GETLINK requests sent with rtgenmsg. Mar 6th: Vlad got this iproute2 reference implementation of the bridge vlan netlink interface accepted (iproute2 9eff0e5c) Apr 25th: iproute2 switched from using rtgenmsg to ifinfomsg (63338dca) http://patchwork.ozlabs.org/patch/239602/ http://marc.info/?t=136680900700007 Apr 28th: Linus released 3.9 Apr 30th: Stephen released iproute2 3.9.0 The `bridge vlan show` command haven't been working since the switch to ifinfomsg, or in a released version of iproute2. Since the kernel side only supports rtgenmsg, which iproute2 switched away from just prior to the iproute2 3.9.0 release. I haven't been able to find any documentation, about neither rtgenmsg nor ifinfomsg, and in which situation to use which, but kernel commit 88c5b5ce seams to suggest that ifinfomsg should be used. Fixing this in kernel will break compatibility, but I doubt that anybody have been using it due to this bug in the user space reference implementation, at least not without noticing this bug. That said the functionality is still fully functional in 3.9, when reversing iproute2 commit 63338dca. This could also be fixed in iproute2, but thats an ugly patch that would reintroduce rtgenmsg in iproute2, and from searching in netdev it seams like rtgenmsg usage is discouraged. I'm assuming that the only reason that Vlad implemented the kernel side to use rtgenmsg, was because iproute2 was using it at the time. Signed-off-by: NAsbjoern Sloth Toennesen <ast@fiberby.net> Reviewed-by: NVlad Yasevich <vyasevich@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Brodkin 提交于
Initially I improperly set a boundary for maximum number of input packets to process on NAPI poll ("work") so it might be more than expected amount ("weight"). This was really harmless but seeing WARN_ON_ONCE on every device boot is not nice. So trivial fix ("<" instead of "<=") is here. Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Mischa Jonker <mjonker@synopsys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-kernel@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pravin B Shelar 提交于
Using inner-id for tunnel id is not safe in some rare cases. E.g. packets coming from multiple sources entering same tunnel can have same id. Therefore on tunnel packet receive we could have packets from two different stream but with same source and dst IP with same ip-id which could confuse ip packet reassembly. Following patch reverts optimization from commit 490ab081 (IP_GRE: Fix IP-Identification.) CC: Jarno Rajahalme <jrajahalme@nicira.com> CC: Ansis Atteka <aatteka@nicira.com> Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Dmitry Kravkov says: ==================== Please consider applying the series of bnx2x fixes to net: * statistics may cause FW assert * missing fairness configuration in DCB flow * memory leak in sriov related part * Illegal PTE access * Pagefault crash in shutdown flow with cnic v1->v2 * fixed sparse error pointed by Joe Perches * added missing signed-off from Sergei Shtylyov v2->v3 * added missing signed-off from Sergei Shtylyov * fixed formatting from Sergei Shtylyov v3->v4 * patch 1/6: fixed declaration order * patch 2/6 replaced with: protect flows using set_bit constraints v4->v5 * patch 2/6: replace proprietary locking with semaphore * droped 1/6: since adds redundant code from Benjamin Poirier The following patchset contains four netfilter fixes, they are: * Fix possible invalid access and mangling of the TCPMSS option in xt_TCPMSS. This was spotted by Julian Anastasov. * Fix possible off by one access and mangling of the TCP packet in xt_TCPOPTSTRIP, also spotted by Julian Anastasov. * Fix possible information leak due to missing initialization of one padding field of several structures that are included in nfqueue and nflog netlink messages, from Dan Carpenter. * Fix TCP window tracking with Fast Open, from Yuchung Cheng. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
There might be a crash as during shutdown flow CNIC might try to access resources already freed by bnx2x. Change bnx2x_close() into dev_close() in __bnx2x_remove (shutdown flow) to guarantee CNIC is notified of the device's change of status. Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NAriel Elior <ariele@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Barak Witkowsky 提交于
PTE write access error might occur in MF_ALLOWED mode when IOMMU is active. The patch adds rmmod HSI indicating to MFW to stop running queries which might trigger this failure. Signed-off-by: NBarak Witkowsky <barak@broadcom.com> Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NAriel Elior <ariele@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ariel Elior 提交于
Signed-off-by: NAriel Elior <ariele@broadcom.com> Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Kravkov 提交于
ETS can be enabled as a result of DCB negotiation, then fairness must be recalculated after each negotiation. Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NAriel Elior <ariele@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Kravkov 提交于
Add locking to protect different statistics flows from running simultaneously. This in order to serialize statistics requests sent to FW, otherwise two outstanding queries may cause FW assert. Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NAriel Elior <ariele@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Acked-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hyong-Youb Kim 提交于
Remove Andrew Gallatin, as he is no longer with Myricom. Add Hyong-Youb Kim as the new maintainer. Update the website URL. Signed-off-by: NHyong-Youb Kim <hykim@myri.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
The DMA sync should sync the whole receive buffer, not just part of it. Fixes log messages dma_sync_check. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 8月, 2013 4 次提交
-
-
由 Johannes Berg 提交于
When dumping generic netlink families, only the first dump call is locked with genl_lock(), which protects the list of families, and thus subsequent calls can access the data without locking, racing against family addition/removal. This can cause a crash. Fix it - the locking needs to be conditional because the first time around it's already locked. A similar bug was reported to me on an old kernel (3.4.47) but the exact scenario that happened there is no longer possible, on those kernels the first round wasn't locked either. Looking at the current code I found the race described above, which had also existed on the old kernel. Cc: stable@vger.kernel.org Reported-by: NAndrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
Probably this one is quite unlikely to be triggered, but it's more safe to do the call_rcu() at the end after we have dropped the reference on the asoc and freed sctp packet chunks. The reason why is because in sctp_transport_destroy_rcu() the transport is being kfree()'d, and if we're unlucky enough we could run into corrupted pointers. Probably that's more of theoretical nature, but it's safer to have this simple fix. Introduced by commit 8c98653f ("sctp: sctp_close: fix release of bindings for deferred call_rcu's"). I also did the 8c98653f regression test and it's fine that way. Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Acked-by: NVlad Yasevich <vyasevich@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
The SCTP Quick failover draft [1] section 5.1, point 5 says that the cwnd should be 1 MTU. So, instead of 1, set it to 1 MTU. [1] https://tools.ietf.org/html/draft-nishida-tsvwg-sctp-failover-05Reported-by: NKarl Heiss <kheiss@gmail.com> Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Cc: Neil Horman <nhorman@tuxdriver.com> Acked-by: NVlad Yasevich <vyasevich@gmail.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
In stmmac_init_rx_buffers(): * add missing handling of dma_map_single() error * remove superfluous unlikely() optimization while at it Add stmmac_free_rx_buffers() helper and use it in dma_free_rx_skbufs(). In init_dma_desc_rings(): * add missing handling of kmalloc_array() errors * fix handling of dma_alloc_coherent() and stmmac_init_rx_buffers() errors * make function return an error value on error and 0 on success In stmmac_open(): * add handling of init_dma_desc_rings() return value Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 8月, 2013 3 次提交
-
-
由 dingtianhong 提交于
We met lockdep warning when enable and disable the bearer for commands such as: tipc-config -netid=1234 -addr=1.1.3 -be=eth:eth0 tipc-config -netid=1234 -addr=1.1.3 -bd=eth:eth0 --------------------------------------------------- [ 327.693595] ====================================================== [ 327.693994] [ INFO: possible circular locking dependency detected ] [ 327.694519] 3.11.0-rc3-wwd-default #4 Tainted: G O [ 327.694882] ------------------------------------------------------- [ 327.695385] tipc-config/5825 is trying to acquire lock: [ 327.695754] (((timer))#2){+.-...}, at: [<ffffffff8105be80>] del_timer_sync+0x0/0xd0 [ 327.696018] [ 327.696018] but task is already holding lock: [ 327.696018] (&(&b_ptr->lock)->rlock){+.-...}, at: [<ffffffffa02be58d>] bearer_disable+ 0xdd/0x120 [tipc] [ 327.696018] [ 327.696018] which lock already depends on the new lock. [ 327.696018] [ 327.696018] [ 327.696018] the existing dependency chain (in reverse order) is: [ 327.696018] [ 327.696018] -> #1 (&(&b_ptr->lock)->rlock){+.-...}: [ 327.696018] [<ffffffff810b3b4d>] validate_chain+0x6dd/0x870 [ 327.696018] [<ffffffff810b40bb>] __lock_acquire+0x3db/0x670 [ 327.696018] [<ffffffff810b4453>] lock_acquire+0x103/0x130 [ 327.696018] [<ffffffff814d65b1>] _raw_spin_lock_bh+0x41/0x80 [ 327.696018] [<ffffffffa02c5d48>] disc_timeout+0x18/0xd0 [tipc] [ 327.696018] [<ffffffff8105b92a>] call_timer_fn+0xda/0x1e0 [ 327.696018] [<ffffffff8105bcd7>] run_timer_softirq+0x2a7/0x2d0 [ 327.696018] [<ffffffff8105379a>] __do_softirq+0x16a/0x2e0 [ 327.696018] [<ffffffff81053a35>] irq_exit+0xd5/0xe0 [ 327.696018] [<ffffffff81033005>] smp_apic_timer_interrupt+0x45/0x60 [ 327.696018] [<ffffffff814df4af>] apic_timer_interrupt+0x6f/0x80 [ 327.696018] [<ffffffff8100b70e>] arch_cpu_idle+0x1e/0x30 [ 327.696018] [<ffffffff810a039d>] cpu_idle_loop+0x1fd/0x280 [ 327.696018] [<ffffffff810a043e>] cpu_startup_entry+0x1e/0x20 [ 327.696018] [<ffffffff81031589>] start_secondary+0x89/0x90 [ 327.696018] [ 327.696018] -> #0 (((timer))#2){+.-...}: [ 327.696018] [<ffffffff810b33fe>] check_prev_add+0x43e/0x4b0 [ 327.696018] [<ffffffff810b3b4d>] validate_chain+0x6dd/0x870 [ 327.696018] [<ffffffff810b40bb>] __lock_acquire+0x3db/0x670 [ 327.696018] [<ffffffff810b4453>] lock_acquire+0x103/0x130 [ 327.696018] [<ffffffff8105bebd>] del_timer_sync+0x3d/0xd0 [ 327.696018] [<ffffffffa02c5855>] tipc_disc_delete+0x15/0x30 [tipc] [ 327.696018] [<ffffffffa02be59f>] bearer_disable+0xef/0x120 [tipc] [ 327.696018] [<ffffffffa02be74f>] tipc_disable_bearer+0x2f/0x60 [tipc] [ 327.696018] [<ffffffffa02bfb32>] tipc_cfg_do_cmd+0x2e2/0x550 [tipc] [ 327.696018] [<ffffffffa02c8c79>] handle_cmd+0x49/0xe0 [tipc] [ 327.696018] [<ffffffff8143e898>] genl_family_rcv_msg+0x268/0x340 [ 327.696018] [<ffffffff8143ed30>] genl_rcv_msg+0x70/0xd0 [ 327.696018] [<ffffffff8143d4c9>] netlink_rcv_skb+0x89/0xb0 [ 327.696018] [<ffffffff8143e617>] genl_rcv+0x27/0x40 [ 327.696018] [<ffffffff8143d21e>] netlink_unicast+0x15e/0x1b0 [ 327.696018] [<ffffffff8143ddcf>] netlink_sendmsg+0x22f/0x400 [ 327.696018] [<ffffffff813f7836>] __sock_sendmsg+0x66/0x80 [ 327.696018] [<ffffffff813f7957>] sock_aio_write+0x107/0x120 [ 327.696018] [<ffffffff8117f76d>] do_sync_write+0x7d/0xc0 [ 327.696018] [<ffffffff8117fc56>] vfs_write+0x186/0x190 [ 327.696018] [<ffffffff811803e0>] SyS_write+0x60/0xb0 [ 327.696018] [<ffffffff814de852>] system_call_fastpath+0x16/0x1b [ 327.696018] [ 327.696018] other info that might help us debug this: [ 327.696018] [ 327.696018] Possible unsafe locking scenario: [ 327.696018] [ 327.696018] CPU0 CPU1 [ 327.696018] ---- ---- [ 327.696018] lock(&(&b_ptr->lock)->rlock); [ 327.696018] lock(((timer))#2); [ 327.696018] lock(&(&b_ptr->lock)->rlock); [ 327.696018] lock(((timer))#2); [ 327.696018] [ 327.696018] *** DEADLOCK *** [ 327.696018] [ 327.696018] 5 locks held by tipc-config/5825: [ 327.696018] #0: (cb_lock){++++++}, at: [<ffffffff8143e608>] genl_rcv+0x18/0x40 [ 327.696018] #1: (genl_mutex){+.+.+.}, at: [<ffffffff8143ed66>] genl_rcv_msg+0xa6/0xd0 [ 327.696018] #2: (config_mutex){+.+.+.}, at: [<ffffffffa02bf889>] tipc_cfg_do_cmd+0x39/ 0x550 [tipc] [ 327.696018] #3: (tipc_net_lock){++.-..}, at: [<ffffffffa02be738>] tipc_disable_bearer+ 0x18/0x60 [tipc] [ 327.696018] #4: (&(&b_ptr->lock)->rlock){+.-...}, at: [<ffffffffa02be58d>] bearer_disable+0xdd/0x120 [tipc] [ 327.696018] [ 327.696018] stack backtrace: [ 327.696018] CPU: 2 PID: 5825 Comm: tipc-config Tainted: G O 3.11.0-rc3-wwd- default #4 [ 327.696018] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 327.696018] 00000000ffffffff ffff880037fa77a8 ffffffff814d03dd 0000000000000000 [ 327.696018] ffff880037fa7808 ffff880037fa77e8 ffffffff810b1c4f 0000000037fa77e8 [ 327.696018] ffff880037fa7808 ffff880037e4db40 0000000000000000 ffff880037e4e318 [ 327.696018] Call Trace: [ 327.696018] [<ffffffff814d03dd>] dump_stack+0x4d/0xa0 [ 327.696018] [<ffffffff810b1c4f>] print_circular_bug+0x10f/0x120 [ 327.696018] [<ffffffff810b33fe>] check_prev_add+0x43e/0x4b0 [ 327.696018] [<ffffffff810b3b4d>] validate_chain+0x6dd/0x870 [ 327.696018] [<ffffffff81087a28>] ? sched_clock_cpu+0xd8/0x110 [ 327.696018] [<ffffffff810b40bb>] __lock_acquire+0x3db/0x670 [ 327.696018] [<ffffffff810b4453>] lock_acquire+0x103/0x130 [ 327.696018] [<ffffffff8105be80>] ? try_to_del_timer_sync+0x70/0x70 [ 327.696018] [<ffffffff8105bebd>] del_timer_sync+0x3d/0xd0 [ 327.696018] [<ffffffff8105be80>] ? try_to_del_timer_sync+0x70/0x70 [ 327.696018] [<ffffffffa02c5855>] tipc_disc_delete+0x15/0x30 [tipc] [ 327.696018] [<ffffffffa02be59f>] bearer_disable+0xef/0x120 [tipc] [ 327.696018] [<ffffffffa02be74f>] tipc_disable_bearer+0x2f/0x60 [tipc] [ 327.696018] [<ffffffffa02bfb32>] tipc_cfg_do_cmd+0x2e2/0x550 [tipc] [ 327.696018] [<ffffffff81218783>] ? security_capable+0x13/0x20 [ 327.696018] [<ffffffffa02c8c79>] handle_cmd+0x49/0xe0 [tipc] [ 327.696018] [<ffffffff8143e898>] genl_family_rcv_msg+0x268/0x340 [ 327.696018] [<ffffffff8143ed30>] genl_rcv_msg+0x70/0xd0 [ 327.696018] [<ffffffff8143ecc0>] ? genl_lock+0x20/0x20 [ 327.696018] [<ffffffff8143d4c9>] netlink_rcv_skb+0x89/0xb0 [ 327.696018] [<ffffffff8143e608>] ? genl_rcv+0x18/0x40 [ 327.696018] [<ffffffff8143e617>] genl_rcv+0x27/0x40 [ 327.696018] [<ffffffff8143d21e>] netlink_unicast+0x15e/0x1b0 [ 327.696018] [<ffffffff81289d7c>] ? memcpy_fromiovec+0x6c/0x90 [ 327.696018] [<ffffffff8143ddcf>] netlink_sendmsg+0x22f/0x400 [ 327.696018] [<ffffffff813f7836>] __sock_sendmsg+0x66/0x80 [ 327.696018] [<ffffffff813f7957>] sock_aio_write+0x107/0x120 [ 327.696018] [<ffffffff813fe29c>] ? release_sock+0x8c/0xa0 [ 327.696018] [<ffffffff8117f76d>] do_sync_write+0x7d/0xc0 [ 327.696018] [<ffffffff8117fa24>] ? rw_verify_area+0x54/0x100 [ 327.696018] [<ffffffff8117fc56>] vfs_write+0x186/0x190 [ 327.696018] [<ffffffff811803e0>] SyS_write+0x60/0xb0 [ 327.696018] [<ffffffff814de852>] system_call_fastpath+0x16/0x1b ----------------------------------------------------------------------- The problem is that the tipc_link_delete() will cancel the timer disc_timeout() when the b_ptr->lock is hold, but the disc_timeout() still call b_ptr->lock to finish the work, so the dead lock occurs. We should unlock the b_ptr->lock when del the disc_timeout(). Remove link_timeout() still met the same problem, the patch: http://article.gmane.org/gmane.network.tipc.general/4380 fix the problem, so no need to send patch for fix link_timeout() deadlock warming. Signed-off-by: NWang Weidong <wangweidong1@huawei.com> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Acked-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephane Grosjean 提交于
Fix possibly wrong memcpy() bytes length since some CAN records received from PCAN-USB could define a DLC field in range [9..15]. In that case, the real DLC value MUST be used to move forward the record pointer but, only 8 bytes max. MUST be copied into the data field of the struct can_frame object of the skb given to the network core. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: NStephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Since commit ac4e4af1 ("macvtap: Consistently use rcu functions"), Thomas gets two different warnings : BUG: using smp_processor_id() in preemptible [00000000] code: vhost-45891/45892 caller is macvtap_do_read+0x45c/0x600 [macvtap] CPU: 1 PID: 45892 Comm: vhost-45891 Not tainted 3.11.0-bisecttest #13 Call Trace: ([<00000000001126ee>] show_trace+0x126/0x144) [<00000000001127d2>] show_stack+0xc6/0xd4 [<000000000068bcec>] dump_stack+0x74/0xd8 [<0000000000481066>] debug_smp_processor_id+0xf6/0x114 [<000003ff802e9a18>] macvtap_do_read+0x45c/0x600 [macvtap] [<000003ff802e9c1c>] macvtap_recvmsg+0x60/0x88 [macvtap] [<000003ff80318c5e>] handle_rx+0x5b2/0x800 [vhost_net] [<000003ff8028f77c>] vhost_worker+0x15c/0x1c4 [vhost] [<000000000015f3ac>] kthread+0xd8/0xe4 [<00000000006934a6>] kernel_thread_starter+0x6/0xc [<00000000006934a0>] kernel_thread_starter+0x0/0xc And BUG: using smp_processor_id() in preemptible [00000000] code: vhost-45897/45898 caller is macvlan_start_xmit+0x10a/0x1b4 [macvlan] CPU: 1 PID: 45898 Comm: vhost-45897 Not tainted 3.11.0-bisecttest #16 Call Trace: ([<00000000001126ee>] show_trace+0x126/0x144) [<00000000001127d2>] show_stack+0xc6/0xd4 [<000000000068bdb8>] dump_stack+0x74/0xd4 [<0000000000481132>] debug_smp_processor_id+0xf6/0x114 [<000003ff802b72ca>] macvlan_start_xmit+0x10a/0x1b4 [macvlan] [<000003ff802ea69a>] macvtap_get_user+0x982/0xbc4 [macvtap] [<000003ff802ea92a>] macvtap_sendmsg+0x4e/0x60 [macvtap] [<000003ff8031947c>] handle_tx+0x494/0x5ec [vhost_net] [<000003ff8028f77c>] vhost_worker+0x15c/0x1c4 [vhost] [<000000000015f3ac>] kthread+0xd8/0xe4 [<000000000069356e>] kernel_thread_starter+0x6/0xc [<0000000000693568>] kernel_thread_starter+0x0/0xc 2 locks held by vhost-45897/45898: #0: (&vq->mutex){+.+.+.}, at: [<000003ff8031903c>] handle_tx+0x54/0x5ec [vhost_net] #1: (rcu_read_lock){.+.+..}, at: [<000003ff802ea53c>] macvtap_get_user+0x824/0xbc4 [macvtap] In the first case, macvtap_put_user() calls macvlan_count_rx() in a preempt-able context, and this is not allowed. In the second case, macvtap_get_user() calls macvlan_start_xmit() with BH enabled, and this is not allowed. Reported-by: NThomas Huth <thuth@linux.vnet.ibm.com> Bisected-by: NThomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Tested-by: NThomas Huth <thuth@linux.vnet.ibm.com> Cc: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 8月, 2013 4 次提交
-
-
git://git.open-mesh.org/linux-merge由 David S. Miller 提交于
Included change: - reassign pointers to data after skb reallocation to avoid kernel paging errors Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Lüssing 提交于
There are several functions which might reallocate skb data. Currently some places keep reusing their old ethhdr pointer regardless of whether they became invalid after such a reallocation or not. This potentially leads to kernel paging errors. This patch fixes these by refetching the ethdr pointer after the potential reallocations. Signed-off-by: NLinus Lüssing <linus.luessing@web.de> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf由 David S. Miller 提交于
Pablo Neira Ayuso says: ==================== The following patchset contains four netfilter fixes, they are: * Fix possible invalid access and mangling of the TCPMSS option in xt_TCPMSS. This was spotted by Julian Anastasov. * Fix possible off by one access and mangling of the TCP packet in xt_TCPOPTSTRIP, also spotted by Julian Anastasov. * Fix possible information leak due to missing initialization of one padding field of several structures that are included in nfqueue and nflog netlink messages, from Dan Carpenter. * Fix TCP window tracking with Fast Open, from Yuchung Cheng. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuchung Cheng 提交于
Currently the conntrack checks if the ending sequence of a packet falls within the observed receive window. However it does so even if it has not observe any packet from the remote yet and uses an uninitialized receive window (td_maxwin). If a connection uses Fast Open to send a SYN-data packet which is dropped afterward in the network. The subsequent SYNs retransmits will all fail this check and be discarded, leading to a connection timeout. This is because the SYN retransmit does not contain data payload so end == initial sequence number (isn) + 1 sender->td_end == isn + syn_data_len receiver->td_maxwin == 0 The fix is to only apply this check after td_maxwin is initialized. Reported-by: NMichael Chan <mcfchan@stanford.edu> Signed-off-by: NYuchung Cheng <ycheng@google.com> Acked-by: NEric Dumazet <edumazet@google.com> Acked-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 10 8月, 2013 8 次提交
-
-
由 Sridhar Samudrala 提交于
Fix inverted check when deleting an fdb entry. Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Byungho An 提交于
This patch fixed the condition of extend_desc for jumbo frame. There is no check routine for extend_desc in the stmmac_jumbo_frm function. Even though extend_desc is set if dma_tx is used instead of dma_etx. It causes kernel panic. Signed-off-by: NByungho An <bh74.an@samsung.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cong Wang 提交于
This is a regression introduced by: commit fe5c3561 Author: stephen hemminger <stephen@networkplumber.org> Date: Sat Jul 13 10:18:18 2013 -0700 vxlan: add necessary locking on device removal The problem is that vxlan_dellink(), which is called with RTNL lock held, tries to flush the workqueue synchronously, but apparently igmp_join and igmp_leave work need to hold RTNL lock too, therefore we have a soft lockup! As suggested by Stephen, probably the flush_workqueue can just be removed and let the normal refcounting work. The workqueue has a reference to device and socket, therefore the cleanups should work correctly. Suggested-by: NStephen Hemminger <stephen@networkplumber.org> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: David S. Miller <davem@davemloft.net> Tested-by: NCong Wang <amwang@redhat.com> Signed-off-by: NCong Wang <amwang@redhat.com> Acked-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cong Wang 提交于
This is a regression introduced by: commit 3fc2de2f Author: stephen hemminger <stephen@networkplumber.org> Date: Thu Jul 18 08:40:15 2013 -0700 vxlan: fix igmp races Before this commit, the old code was: if (vxlan_group_used(vn, vxlan->default_dst.remote_ip)) ip_mc_join_group(sk, &mreq); else ip_mc_leave_group(sk, &mreq); therefore we shoud check vxlan_group_used(), not its opposite, for igmp_join. Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <amwang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eliezer Tamir 提交于
Rename mib counter from "low latency" to "busy poll" v1 also moved the counter to the ip MIB (suggested by Shawn Bohrer) Eric Dumazet suggested that the current location is better. So v2 just renames the counter to fit the new naming convention. Signed-off-by: NEliezer Tamir <eliezer.tamir@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dave Jones 提交于
Introduced in cf3c4c03 ("8139cp: Add dma_mapping_error checking") Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Same behavior than 802.1q : finds the encapsulated protocol and skip 32bit header. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Timo Teräs 提交于
Fix ipgre_header() (header_ops->create) to return the correct amount of bytes pushed. Most callers of dev_hard_header() seem to care only if it was success, but af_packet.c uses it as offset to the skb to copy from userspace only once. In practice this fixes packet socket sendto()/sendmsg() to gre tunnels. Regression introduced in c5441932 ("GRE: Refactor GRE tunneling code.") Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: NTimo Teräs <timo.teras@iki.fi> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 8月, 2013 2 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless由 David S. Miller 提交于
John W. Linville says: ==================== This is a batch of fixes intended for the 3.11 queue... Regarding the mac80211 (and related) bits, Johannes says: "I have a fix from Chris for an infinite loop along with fixes from myself to prevent it entering the loop to start with (continue using disabled channels, many thanks to Chris for his debug/test help) and a workaround for broken APs that advertise a bad HT primary channel in their beacons. Additionally, a fix for another attrbuf race in mac80211 and a fix to clean up properly while P2P GO interfaces go down." Along with that... Solomon Peachy corrects a range check in cw1200 that would lead to a BUG_ON when starting AP mode. Stanislaw Gruszka provides an iwl4965 patch to power-up the device earlier (avoiding microcode errors), and another iwl4965 fix that resets the firmware after turning rfkill off (resolving a bug in the Red Hat Bugzilla). Please let me know if there are problems! ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John W. Linville 提交于
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
-
- 08 8月, 2013 1 次提交
-
-
由 Hannes Frederic Sowa 提交于
In case a subtree did not match we currently stop backtracking and return NULL (root table from fib_lookup). This could yield in invalid routing table lookups when using subtrees. Instead continue to backtrack until a valid subtree or node is found and return this match. Also remove unneeded NULL check. Reported-by: NTeco Boot <teco@inf-net.nl> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: David Lamparter <equinox@diac24.net> Cc: <boutier@pps.univ-paris-diderot.fr> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-