IPv4 would work with this driver only with static arp table entries,
the patch  reverts a padto introduced in

 commit 26a17b7b
 sc92031: start transmit return value bugfix

The padto does not work because the driver code evaluates `len' later on and
there are cases where skb->len is not updated accordingly.

This was observed with ARP frames (skb->len = 42 bytes, !skb_cloned(),
skb_tailroom = 84 bytes). Then in skb_pad(), the first condition is true, where
skb->len is not updated. As a consequence, the driver uses 42 bytes instead of
the 60 bytes, and the ARP frame never makes it onto the wire.
Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

 Use netdev_alloc_skb.  This sets skb->dev and allows arch specific
allocation.  Also simplify and cleanup the alignment code.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

nv_open() resets multicast settings, call nv_set_multicast(dev)
to restore them.  (Maybe this should rather be moved into nv_open())
Signed-off-by: NTobias Diedrich <ranma+kernel@tdiedrich.de>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Signed-off-by: NKrzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This patch makes the needlessly global
myri10ge_get_firmware_capabilities() static.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Cc: Ramkrishna Vepa <ram.vepa@neterion.com>
Cc: Rastapur Santosh <santosh.rastapur@neterion.com>
Cc: Sivakumar Subramani <sivakumar.subramani@neterion.com>
Cc: Sreenivasa Honnur <sreenivasa.honnur@neterion.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Fixes the following use after free oops:

ehea: Reboot: freeing all eHEA resources
Unable to handle kernel paging request for data at address 0x6b6b6b6b6b6b6c5b
Faulting instruction address: 0xd000000000354488
cpu 0x0: Vector: 300 (Data Access) at [c00000002ec6f310]
    pc: d000000000354488: .ehea_shutdown_single_port+0x50/0x78 [ehea]
    lr: d00000000035447c: .ehea_shutdown_single_port+0x44/0x78 [ehea]
    sp: c00000002ec6f590
   msr: 8000000000009032
   dar: 6b6b6b6b6b6b6c5b
 dsisr: 40000000
  current = 0xc0000000281412e0
  paca    = 0xc0000000006df300
    pid   = 10930, comm = reboot
enter ? for help
[c00000002ec6f590] d00000000035d64c .ehea_remove+0x44/0x124 [ehea] (unreliable)
[c00000002ec6f630] c000000000319f88 .of_platform_device_remove+0x40/0x58
[c00000002ec6f6a0] c000000000291018 .__device_release_driver+0xb0/0xf0
[c00000002ec6f730] c000000000291120 .driver_detach+0xc8/0xfc
[c00000002ec6f7c0] c00000000028fe24 .bus_remove_driver+0xb4/0x114
[c00000002ec6f850] c000000000291768 .driver_unregister+0x54/0x74
[c00000002ec6f8e0] c00000000031a0c8 .of_unregister_driver+0x14/0x28
[c00000002ec6f950] c000000000023ba0 .ibmebus_unregister_driver+0x10/0x24
[c00000002ec6f9c0] d000000000354180 .ehea_reboot_notifier+0x30/0x4c [ehea]
[c00000002ec6fa40] c0000000003c95a8 .notifier_call_chain+0x5c/0xcc
[c00000002ec6fae0] c000000000082cd4 .__blocking_notifier_call_chain+0x70/0xb0
[c00000002ec6fb90] c000000000075cf8 .kernel_restart_prepare+0x24/0x58
[c00000002ec6fc10] c000000000075f0c .kernel_restart+0x20/0x6c
[c00000002ec6fc90] c000000000078674 .sys_reboot+0x1d4/0x290
[c00000002ec6fe30] c0000000000086ac syscall_exit+0x0/0x40
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Some devices running some WinCE firmware (with SC_* Samsung processors
according to the SynCE project, verified on a HTC P3600 device) fail to
register because they apparently need extra time to respond correctly to
requests.  Increase the existing delay to satisfy them.  Based on code
from the SynCE project, on a suggestion of David Brownell.

This patch Works For Me(tm).
Signed-off-by: NPierre Ynard <linkfanel@yahoo.fr>
Acked-by: NDavid Brownell <david-b@pacbell.net>
Cc: Greg KH <greg@kroah.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

When dev_name() is changed to return `const char *':

drivers/net/tokenring/olympic.c: In function 'olympic_probe':
drivers/net/tokenring/olympic.c:234: warning: assignment discards qualifiers from pointer target type

Cc: Jeff Garzik <jeff@garzik.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

When dev_name() is changed to return `const char *':

drivers/net/tokenring/3c359.c: In function 'xl_probe':
drivers/net/tokenring/3c359.c:318: warning: assignment discards qualifiers from pointer target type

Cc: Jeff Garzik <jeff@garzik.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

pci_name() will be changed to return `const char *':

drivers/net/pcnet32.c: In function 'pcnet32_probe1':
drivers/net/pcnet32.c:1884: warning: passing argument 2 of 'pcnet32_alloc_ring' discards qualifiers from pointer target type

Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

use cancel_delayed_work_sync()

Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

If device has to be reset by sky2_restart, then need to restore
the VLAN acceleration settings.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This driver has diverged from the out-of-tree driver to which the version
number originally applied.  It should be identified primarily by kernel
version.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Remove redundant casts and variable.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Also change type of efx_nic_type::max_dma_mask to u64, matching
pci_dma_supported() parameter type.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

These comments have been revised in response to questions raised by Andrew
Morton in <20080501120858.207b6dd6.akpm@linux-foundation.org>.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This should make the driver work on 32-bit systems with 64-bit PCI support.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Merged it into its only caller, efx_init_channels().
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

  Unless there will be any objection here, I suggest consider the
following patch which simply removes the code for the
-DI_WISH_WORLD_WERE_PERFECT in the three methods which use it.

The compilation errors we get when using -DI_WISH_WORLD_WERE_PERFECT
show that this code was not built and not used for really a long time.
Signed-off-by: NRami Rosen <ramirose@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If previous window was above representable values of u16,
strange things will happen if undo with the truncated value
is called for. Alternatively, this could be fixed by some
max trickery but that would limit undoing high-speed undos.

Adds 16-bit hole but there isn't anything to fill it with.
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The crypto layer will determine whether that is valid
or not.

Suggested by Herbert Xu, based upon a report and patch
by Martin Willi.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>

Here the local hexbuf is a duplicate of global const char hex_asc from
lib/hexdump.c, except the hex letters' cases:

	const char hexbuf[] = "0123456789ABCDEF";

	const char hex_asc[] = "0123456789abcdef";

and here to print HW addresses, the hex cases are not significant.

Thanks to Harvey Harrison to introduce the hex_asc_hi/hex_asc_lo helpers.
Signed-off-by: NDenis Cheng <crquan@gmail.com>
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

According to David Monro, at least with Natsemi Saturn chips the
cassini driver has some trouble with ipv6 checksums.

Until we have more information about what's going on here, only
use the chip checksums for ipv4.

This workaround was suggested and tested by David.

Update version and release date.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We are seeing an issue with TCP in handling an ICMP frag needed
message that is received after net.ipv4.tcp_retries1 retransmits.
The default value of retries1 is 3. So if the path mtu changes
and ICMP frag needed is lost for the first 3 retransmits or if
it gets delayed until 3 retransmits are done, TCP doesn't update
MSS correctly and continues to retransmit the orginal message
until it timesout after tcp_retries2 retransmits.

I am seeing this issue even with the latest 2.6.25.4 kernel.

In tcp_retransmit_timer(), when retransmits counter exceeds 
tcp_retries1 value, the dst cache entry of the socket is reset.
At this time, if we receive an ICMP frag needed message, the 
dst entry gets updated with the new MTU, but the TCP sockets
dst_cache entry remains NULL.

So the next time when we try to retransmit after the ICMP frag
needed is received, tcp_retransmit_skb() gets called. Here the
cur_mss value is calculated at the start of the routine with
a NULL sk_dst_cache. Instead we should call tcp_current_mss after
the rebuild_header that caches the dst entry with the updated mtu.
Also the rebuild_header should be called before tcp_fragment
so that skb is fragmented if the mss goes down.
Signed-off-by: NSridhar Samudrala <sri@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Greg Steuck <greg@nest.cx> points out that some of the netfilter
headers can't be used in userspace without including linux/types.h
first. The headers include their own linux/types.h include statements,
these are stripped by make headers-install because they are inside
#ifdef __KERNEL__ however. Move them out to fix this.

Reported and Tested by Greg Steuck.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This propagates the xfrm_user fix made in commit
bcf0dda8 ("[XFRM]: xfrm_user: fix
selector family initialization")

Based upon a bug report from, and tested by, Alan Swanson.
Signed-off-by: NKazunori MIYAZAWA <kazunori@miyazawa.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix various problems:
 - We converted MESH_ACCESS to a direct command but missed this caller.
 - We were trying to access mesh stats even on meshless firmware.
 - We should really zero the buffer if something goes wrong.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Acked-by: NDan Williams <dcbw@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>