Print accumulated stat of a hist entry if requested.

To do that, add new HPP_PERCENT_ACC_FNS macro and generate a
perf_hpp_fmt using it.  The __hpp__sort_acc() function sorts entries
by accumulated period value.  When accumulated periods of two entries
are same (i.e. single path callchain) put the caller above since
accumulation tends to put callers on higher position for obvious
reason.

Also add "overhead_children" output field to be selected by user.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArun Sharma <asharma@fb.com>
Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-11-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

When accumulating callchain entry, also save current snapshot of the
chain so that it can show the rest of the chain.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArun Sharma <asharma@fb.com>
Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-10-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

The callchain_cursor_snapshot() is for saving current status of the
callchain.  It'll be used to accumulate callchain information for each node.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArun Sharma <asharma@fb.com>
Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-9-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

It is possble that a callchain has cycles or recursive calls.  In that
case it'll end up having entries more than 100% overhead in the
output.  In order to prevent such entries, cache each callchain node
and skip if same entry already cumulated.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArun Sharma <asharma@fb.com>
Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-8-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

The cpumode and level in struct addr_localtion was set for a sample
and but updated as cumulative callchains were added.  This led to have
non-matching symbol and cpumode in the output.

Update it accordingly based on the fact whether the map is a part of
the kernel or not.  This is a reverse of what thread__find_addr_map()
does.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArun Sharma <asharma@fb.com>
Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-7-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Call __hists__add_entry() for each callchain node to get an
accumulated stat for an entry.  Introduce new cumulative_iter ops to
process them properly.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArun Sharma <asharma@fb.com>
Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-6-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

To support callchain accumulation, @entry should be recognized if it's
accumulated or not when add_hist_entry() called.  The period of an
accumulated entry should be added to ->stat_acc but not ->stat. Add
@sample_self arg for that.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArun Sharma <asharma@fb.com>
Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-5-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Maintain accumulated stat information in hist_entry->stat_acc if
symbol_conf.cumulate_callchain is set.  Fields in ->stat_acc have same
vaules initially, and will be updated as callchain is processed later.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArun Sharma <asharma@fb.com>
Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-4-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

There're some duplicate code when adding hist entries.  They are
different in that some have branch info or mem info but generally do
same thing.  So introduce new struct hist_entry_iter and add callbacks
to customize each case in general way.

The new perf_evsel__add_entry() function will look like:

  iter->prepare_entry();
  iter->add_single_entry();

  while (iter->next_entry())
    iter->add_next_entry();

  iter->finish_entry();

This will help further work like the cumulative callchain patchset.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArun Sharma <asharma@fb.com>
Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1401335910-16832-3-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

There're some duplicate code for counting number of samples.  Add
hists__inc_nr_samples() and reuse it.
Suggested-by: NJiri Olsa <jolsa@kernel.org>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1401335910-16832-2-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf into perf/core

Pull perf/core improvements and fixes from Jiri Olsa:

  * Android related fixes for pager and map dso resolving (Michael Lentine)

  * Add -F option for specifying output fields (Namhyung Kim)
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

This patch automatically adjusts the path of MMAP records
associated with Android system libraries.

The Android system is organized with system libraries found in
/system/lib and user libraries in /data/app-lib. On the host system
(not running Android), system libraries can be found in the downloaded
NDK directory under ${NDK_ROOT}/platforms/${APP_PLATFORM}/arch-${ARCH}/usr/lib
and the user libraries are installed under libs/${APP_ABI} within
the apk build directory. This patch makes running the reporting
tools possible on the host system using the libraries from the NDK.
Signed-off-by: NMichael Lentine <mlentine@google.com>
Reviewed-by: NStephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1400579330-5043-3-git-send-email-eranian@google.com
[ fixed 'space required before the open parenthesis' checkpatch.pl errors ]
Signed-off-by: NJiri Olsa <jolsa@kernel.org>

This patch adds a fallback to cat for the pager. This is useful
on environments, such as Android, where less does not exist.
It is better to default to cat than to abort.
Signed-off-by: NMichael Lentine <mlentine@google.com>
Reviewed-by: NStephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1400579330-5043-2-git-send-email-eranian@google.comSigned-off-by: NJiri Olsa <jolsa@kernel.org>

With new output fields option, its internal implementation was changed
so add a new testcase to verify whether it breaks things.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-21-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Those print helper functions can be reused by later hist test cases so
factor them out to a common location.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-20-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

The reset_output_field() function is for clearing output field
settings and will be used for test code in later patch.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-19-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Now we moved to the perf_hpp_[_sort]_list so no need to keep the old
hist_entry__sort_list and sort__first_dimension.  Also the
hist_entry__sort_snprintf() can be gone as hist_entry__snprintf()
provides the functionality.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-18-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Some fields missed to set default column length so it broke align in
--stdio output.  Add perf_hpp__reset_width() to set it to a sane
default value.

Note that this change will ignore -w/--column-widths option for now.

Before:
  $ perf report -F cpu,comm,overhead --stdio
  ...
  # CPU          Command  Overhead
  #   ...............  ........
  #
    0          firefox     2.65%
    0      kworker/0:0     1.45%
    0          swapper     5.52%
    0         synergys     0.92%
    1          firefox     4.54%

After:
  # CPU          Command  Overhead
  # ...  ...............  ........
  #
      0          firefox     2.65%
      0      kworker/0:0     1.45%
      0          swapper     5.52%
      0         synergys     0.92%
      1          firefox     4.54%
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-17-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

When it converted sort entries to hpp formats, it missed se->elide
handling, so add it for compatibility.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-16-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

The --fields option is to allow user setup output field in any order.
It can receive any sort keys and following (hpp) fields:

  overhead, overhead_sys, overhead_us, sample and period

If guest profiling is enabled, overhead_guest_{sys,us} will be
available too.

More more information, please see previous patch "perf report:
Add -F option to specify output fields"
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-15-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

The hists__filter_entries() function is called when down arrow key is
pressed for navigating through the entries in TUI.  It has a check for
filtering out entries that have very small overhead (under min_pcnt).

However it just assumed the entries are sorted by the overhead so when
it saw such a small overheaded entry, it just stopped navigating as an
optimization.  But it's not true anymore due to new --fields and
--sort optoin behavior and this case users cannot go down to a next
entry if ther's an entry with small overhead in-between.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-14-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Currently, what the sort_entry does is just identifying hist entries
so that they can be grouped properly.  However, with -F option
support, it indeed needs to sort entries appropriately to be shown to
users.  So add ->sort() member to do it.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-13-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

The -F/--fields option is to allow user setup output field in any
order.  It can receive any sort keys and following (hpp) fields:

  overhead, overhead_sys, overhead_us, sample and period

If guest profiling is enabled, overhead_guest_{sys,us} will be
available too.

The output fields also affect sort order unless you give -s/--sort
option.  And any keys specified on -s option, will also be added to
the output field list automatically.

  $ perf report -F sym,sample,overhead
  ...
  #                     Symbol       Samples  Overhead
  # ..........................  ............  ........
  #
    [.] __cxa_atexit                       2     2.50%
    [.] __libc_csu_init                    4     5.00%
    [.] __new_exitfn                       3     3.75%
    [.] _dl_check_map_versions             1     1.25%
    [.] _dl_name_match_p                   4     5.00%
    [.] _dl_setup_hash                     1     1.25%
    [.] _dl_sysdep_start                   1     1.25%
    [.] _init                              5     6.25%
    [.] _setjmp                            6     7.50%
    [.] a                                  8    10.00%
    [.] b                                  8    10.00%
    [.] brk                                1     1.25%
    [.] c                                  8    10.00%

Note that, the example output above is captured after applying next
patch which fixes sort/comparing behavior.
Requested-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-12-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

So that it can be set properly prior to set up output fields.  That
makes easy to handle/warn errors during the setup since it doesn't
need to be bothered with the GUI.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-11-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

The perf uses different default sort orders for different use-cases,
and this was scattered throughout the code.  Add get_default_sort_
order() function to handle this and change initial value of sort_order
to NULL to distinguish it from user-given one.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1400480762-22852-10-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Add overhead{,_sys,_us,_guest_sys,_guest_us}, sample and period sort
keys so that they can be selected with --sort/-s option.

  $ perf report -s period,comm --stdio
  ...
  # Overhead        Period          Command
  # ........  ............  ...............
  #
      47.06%           152          swapper
      13.93%            45  qemu-system-arm
      12.38%            40         synergys
       3.72%            12          firefox
       2.48%             8            xchat
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-9-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

The callback was used by TUI for determining color of folded sign
using percent of first field/column. But it cannot be used anymore
since it now support dynamic reordering of output field.

So move the logic to the hist_browser__show_entry().
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-8-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Until now the hpp and sort functions do similar jobs different ways.
Since the sort functions converted/wrapped to hpp formats it can do
the job in a uniform way.

The perf_hpp__sort_list has a list of hpp formats to sort entries and
the perf_hpp__list has a list of hpp formats to print output result.

To have a backward compatibility, it automatically adds 'overhead'
field in front of sort list.  And then all of fields in sort list
added to the output list (if it's not already there).
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/n/tip-7g3h86woz2sckg3h1lj42ygj@git.kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Convert output sorting function to use ->sort hpp functions.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-6-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Move logic of hist_entry__sort_on_period to __hpp__sort() in order to
support event group report.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-5-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

It wrapped sort entries to hpp functions, so using the hpp sort list
to sort entries.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-4-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

This is a preparation of consolidating management of output field and
sort keys.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-3-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Those function pointers will be used to sort report output based on
the selected fields.  This is a preparation of later change.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-2-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf into perf/core

Pull perf/core improvements and fixes from Jiri Olsa:

  * Add libdw DWARF post unwind support for ARM (Jean Pihet)

  * Consolidate types.h for ARM and ARM64 (Jean Pihet)

  * Fix possible null pointer dereference in session.c (Masanari Iida)

  * Cleanup, remove unused variables in map_switch_event() (Dongsheng Yang)

  * Remove nr_state_machine_bugs in perf latency (Dongsheng Yang)

  * Remove usage of trace_sched_wakeup(.success) (Peter Zijlstra)
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

This patch fixes a bug in  precise_store_data_hsw() whereby
it would set the data source memory level to the wrong value.

As per the the SDM Vol 3b Table 18-41 (Layout of Data Linear
Address Information in PEBS Record), when status bit 0 is set
this is a L1 hit, otherwise this is a L1 miss.

This patch encodes the memory level according to the specification.

In V2, we added the filtering on the store events.
Only the following events produce L1 information:
 * MEM_UOPS_RETIRED.STLB_MISS_STORES
 * MEM_UOPS_RETIRED.LOCK_STORES
 * MEM_UOPS_RETIRED.SPLIT_STORES
 * MEM_UOPS_RETIRED.ALL_STORES

Cc: mingo@elte.hu
Cc: acme@ghostprotocols.net
Cc: jolsa@redhat.com
Cc: jmario@redhat.com
Cc: ak@linux.intel.com
Tested-and-Reviewed-by: NDon Zickus <dzickus@redhat.com>
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140515155644.GA3884@quadSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Vince noticed that we test the (unsigned long) flags field against an
(unsigned int) constant. This would allow setting the high bits on 64bit
platforms and not get an error.

There is nothing that uses the high bits, so it should be entirely
harmless, but we don't want userspace to accidentally set them anyway,
so fix the constants.

Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-by: NVince Weaver <vincent.weaver@maine.edu>
Tested-by: NVince Weaver <vincent.weaver@maine.edu>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140423102254.GL11096@twins.programming.kicks-ass.netSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

... in 3a497f48 ("perf: Simplify perf_event_exit_task_context()")
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1399720259-28275-1-git-send-email-bp@alien8.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Adding libdw DWARF post unwind support, which is part
of elfutils-devel/libdw-dev package from version 0.158.

The new code is contained in unwin-libdw.c object, and
implements unwind__get_entries unwind interface function.
Signed-off-by: NJean Pihet <jean.pihet@linaro.org>
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1400229672-16104-4-git-send-email-jean.pihet@linaro.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Adding dwarf unwind test, that setups live machine data over
the perf test thread and does the remote unwind.

Need to use -fno-optimize-sibling-calls for test compilation,
otherwise 'krava_*' function calls are optimized into jumps
and omitted from the stack unwind.

So far it was enabled only for x86.
Signed-off-by: NJean Pihet <jean.pihet@linaro.org>
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1400229672-16104-3-git-send-email-jean.pihet@linaro.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Introducing perf_regs_load function, which is going
to be used for dwarf unwind test in following patches.

It takes single argument as a pointer to the regs dump
buffer and populates it with current registers values.
Signed-off-by: NJean Pihet <jean.pihet@linaro.org>
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1400229672-16104-2-git-send-email-jean.pihet@linaro.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>