Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

The T101MT Home/Express Gate key autorepeats in hardware, but
sparse-keymap does not support hardware autorepeat. Enable the
input core's software autorepeat to emulate the hardware behavior.
Normal hotkeys are autoreleased, so the behavior of these keys
will not be affected.
Signed-off-by: NSeth Forshee <seth.forshee@canonical.com>
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

This key is different than other hotkeys, having seperate scan
codes for press, release, and hold, so it requires some special
filtering. Press and release events are passed on, and hold events
are ignored since sparse-keymap does not support hardware
autorepeat.

Note that "Home" in the context of this button doesn't mean the
same thing as the usual Home key, and it really isn't clear at
all what is meant by "Home". The manufacurer's description of the
button indicates that it should launch some sort of touch screen
settings interface on short press and apply a desktop rotation on
long press.
Signed-off-by: NSeth Forshee <seth.forshee@canonical.com>
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

This is required for the T101MT home key, which behaves differently
than other hotkeys.
Signed-off-by: NSeth Forshee <seth.forshee@canonical.com>
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

The code was completly broken, and should never had been sent
to the kernel. That's what happens when you write code without
hardware to test it.

Cc: stable@kernel.org
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

When acpi_backlight=vendor in cmdline or no backlight support in acpi video
device, ideapad-laptop will register backlight device and control brightness
and backlight power via the command in VPC2004.
Signed-off-by: NIke Panhc <ike.pan@canonical.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Signed-off-by: NIke Panhc <ike.pan@canonical.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Create /sys/devices/platform/ideapad/cfg for showing cfg value.
Signed-off-by: NIke Panhc <ike.pan@canonical.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

I suspect that this works on T410.
Signed-off-by: NAndy Lutomirski <luto@mit.edu>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

After test, msi-laptop driver also can support MSI U270 netbook.
So, add MSI U270's dmi information to module alias and scm table
for support this machine.

Tested on MSI U270 netbook.

Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: NLee, Chun-Yi <jlee@novell.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Signed-off-by: NSeth Forshee <seth.forshee@canonical.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Would you please consider applying the following patch adding support for
the Aspire 1810TZ BIOS v.1.3314 version to the acerhdf module and avoids the
following error:

acerhdf: unknown (unsupported) BIOS version Acer/Aspire 1810TZ/v1.3314, ple=
ase report, aborting!

Not sure about the other Aspire models, but it seems at least 1810T should
also be updated.
Signed-off-by: NJulien Valroff <julien@kirya.net>

DEFINE_MUTEX() will automatically initialize buffer_mutex,
no need to call mutex_init() in dell_init().
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

we can now autodetect internal 3G device and already have the threeg
rfkill device. So, we plan to remove threeg sysfs support for it's no
longer necessary.

We also plan to remove interface sysfs file that exposed which ACPI-WMI
interface that was used by acer-wmi driver. It will replaced by information
log when acer-wmi initial.

We keep it around for userspace compatibility reasons, schedule removal
in 2012.

Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Acked-by: NThomas Renninger <trenn@suse.de>
Signed-off-by: NLee, Chun-Yi <jlee@novell.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (55 commits)
  Revert "drm/i915: Try enabling RC6 by default (again)"
  drm/radeon: Extended DDC Probing for ECS A740GM-M DVI-D Connector
  drm/radeon: Log Subsystem Vendor and Device Information
  drm/radeon: Extended DDC Probing for Connectors with Improperly Wired DDC Lines (here: Asus M2A-VM HDMI)
  drm: Separate EDID Header Check from EDID Block Check
  drm: Add NULL check about irq functions
  drm: Fix irq install error handling
  drm/radeon: fix potential NULL dereference in drivers/gpu/drm/radeon/atom.c
  drm/radeon: clean reg header files
  drm/debugfs: Initialise empty variable
  drm/radeon/kms: add thermal chip quirk for asus 9600xt
  drm/radeon: off by one in check_reg() functions
  drm/radeon/kms: fix version comment due to merge timing
  drm/i915: allow cache sharing policy control
  drm/i915/hdmi: HDMI source product description infoframe support
  drm/i915/hdmi: split infoframe setting from infoframe type code
  drm: track CEA version number if present
  drm/i915: Try enabling RC6 by default (again)
  Revert "drm/i915/dp: Zero the DPCD data before connection probe"
  drm/i915/dp: wait for previous AUX channel activity to clear
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: Size mondo queues more sanely.
  sparc: Access kernel TSB using physical addressing when possible.
  sparc: Fix __atomic_add_unless() return value.
  sparc: use kbuild-generic support for true asm-generic header files
  sparc: Use popc when possible for ffs/__ffs/ffz.
  sparc: Set reboot-cmd using reboot data hypervisor call if available.
  sparc: Add some missing hypervisor API groups.
  sparc: Use hweight64() in popc emulation.
  sparc: Use popc if possible for hweight routines.
  sparc: Minor tweaks to Niagara page copy/clear.
  sparc: Sanitize cpu feature detection and reporting.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (54 commits)
  ipv6: check for IPv4 mapped addresses when connecting IPv6 sockets
  mlx4: decreasing ref count when removing mac
  net: Fix security_socket_sendmsg() bypass problem.
  net: Cap number of elements for sendmmsg
  net: sendmmsg should only return an error if no messages were sent
  ixgbe: fix PHY link setup for 82599
  ixgbe: fix __ixgbe_notify_dca() bail out code
  igb: fix WOL on second port of i350 device
  e1000e: minor re-order of #include files
  e1000e: remove unnecessary check for NULL pointer
  intel drivers: repair missing flush operations
  macb: restore wrap bit when performing underrun cleanup
  cdc_ncm: fix endianness problem.
  irda: use PCI_VENDOR_ID_*
  mlx4: Fixing Ethernet unicast packet steering
  net: fix NULL dereferences in check_peer_redir()
  bnx2x: Clear MDIO access warning during first driver load
  bnx2x: Fix BCM578xx MAC test
  bnx2x: Fix BCM54618se invalid link indication
  bnx2x: Fix BCM84833 link
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
  drivers/ide/cy82c693.c: Add missing pci_dev_put
  ide: Fix irq flags madness

When support for binding to 'mapped INADDR_ANY (::ffff.0.0.0.0)' was added
in 0f8d3c7a the rest of the code
wasn't told so now it's possible to bind IPv6 datagram socket to
::ffff.0.0.0.0, connect it to another IPv4 address and it will all
work except for getsockhame() which does not return the local address
as expected.

To give getsockname() something to work with check for 'mapped INADDR_ANY'
when connecting and update the in-core source addresses appropriately.
Signed-off-by: NMax Matveev <makc@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For older FW versions, when a Mac address removed from Mac table,
we should set 0 for reference count for the corresponding Mac index.
Fixes a bug where removing Mac from the table still left that entry as
invalid.
Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il>
Tested-by: NRoland Dreier <roland@purestorage.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The sendmmsg() introduced by commit 228e548e "net: Add sendmmsg socket system
call" is capable of sending to multiple different destination addresses.

SMACK is using destination's address for checking sendmsg() permission.
However, security_socket_sendmsg() is called for only once even if multiple
different destination addresses are passed to sendmmsg().

Therefore, we need to call security_socket_sendmsg() for each destination
address rather than only the first destination address.

Since calling security_socket_sendmsg() every time when only single destination
address was passed to sendmmsg() is a waste of time, omit calling
security_socket_sendmsg() unless destination address of previous datagram and
that of current datagram differs.
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: NAnton Blanchard <anton@samba.org>
Cc: stable <stable@kernel.org> [3.0+]
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To limit the amount of time we can spend in sendmmsg, cap the
number of elements to UIO_MAXIOV (currently 1024).

For error handling an application using sendmmsg needs to retry at
the first unsent message, so capping is simpler and requires less
application logic than returning EINVAL.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Cc: stable <stable@kernel.org> [3.0+]
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sendmmsg uses a similar error return strategy as recvmmsg but it
turns out to be a confusing way to communicate errors.

The current code stores the error code away and returns it on the next
sendmmsg call. This means a call with completely valid arguments could
get an error from a previous call.

Change things so we only return an error if no datagrams could be sent.
If less than the requested number of messages were sent, the application
must retry starting at the first failed one and if the problem is
persistent the error will be returned.

This matches the behaviour of other syscalls like read/write - it
is not an error if less than the requested number of elements are sent.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Cc: stable <stable@kernel.org> [3.0+]
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 4e20fa65.

Francesco Allertsen still has a broken configuration.
Signed-off-by: NDave Airlie <airlied@redhat.com>

There is currently no upper limit on the mondo queue sizes we'll use,
which guarentees that we'll eventually his page allocation limits, and
thus allocation failures, due to MAX_ORDER.

Cap the sizes sanely, current limits are:

CPU  MONDO	2 * max_possible_cpus
DEV  MONDO	256 (basically NR_IRQS)
RES  MONDO	128
NRES MONDO	4
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On sun4v this is basically required since we point the hypervisor and
the TSB walking hardware at these tables using physical addressing
too.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This isn't really critical any more, since other patches (commit
298507d4: "shm: optimize exit_shm()") have caused us to not actually
need to touch the rw_mutex unless there are actual shm segments
associated with the namespace, but we really should do tne shm_init_ns()
earlier than we do now.

This, together with commit 288d5abe ("Boot up with usermodehelper
disabled") will mean that we really do initialize the initial ipc
namespace data structure before we run any tasks.
Tested-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  RCUify freeing acls, let check_acl() go ahead in RCU mode if acl is cached
  get rid of boilerplate switches in posix_acl.h
  fix block device fallout from ->fsync() changes

* 'fixefi' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  efi: Fix argument types for SetVariable() for ia64

Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  slab, lockdep: Annotate the locks before using them
  lockdep: Clear whole lockdep_map on initialization
  slab, lockdep: Annotate slab -> rcu -> debug_object -> slab
  lockdep: Fix up warning
  lockdep: Fix trace_hardirqs_on_caller()
  futex: Fix regression with read only mappings

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  dmaengine: use DEFINE_IDR for static initialization
  ioat: fix xor_idx_to_desc
  Avoid section type conflict in dma/ioat/dma_v3.c
  ioat: Adding PCI IDs for IOAT devices on SandyBridge platforms

Commit a0bfa137 mispells
cpuidle_idle_call() on ARM and SH code.  Fix this to be consistent.

Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: x86@kernel.org
Cc: Len Brown <len.brown@intel.com>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>
[ Also done by Mark Brown - th ebug has been around forever, and was
  noticed in -next, but the idle tree never picked it up. Bad bad bad ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The spec says this takes uint32 for attributes, not uintn.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

* 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6:
  Revert "dt: add of_alias_scan and of_alias_get_id"
  dt: remove of_alias_get_id() reference

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6:
  [PARISC] wire up sendmmsg syscall
  [PARISC] fix return type of __atomic64_add_return
  [PARISC] Fix futex support

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] signal: use set_restore_sigmask() helper
  [S390] smp: remove pointless comments in startup_secondary()
  [S390] qdio: Use kstrtoul_from_user
  [S390] sclp_async: Use kstrtoul_from_user
  [S390] exec: remove redundant set_fs(USER_DS)
  [S390] cpu hotplug: on cpu start wait until being marked active
  [S390] signal: convert to use set_current_blocked()
  [S390] asm offsets: fix coding style
  [S390] Add support for IBM zEnterprise 114
  [S390] dasd: check if raw track access is supported
  [S390] Use diagnose 308 for system reset
  [S390] Export store_status() function
  [S390] dasd: use vmalloc for statistics input buffer
  [S390] Add PSW restart shutdown trigger
  [S390] missing return in page_table_alloc_pgste
  [S390] qdio: 2nd stage retry on SIGA-W busy conditions

While `pci_eisa_driver' still refer `pci_eisa_init', the .probe() function
should not be called after init memory release, as pointed out by commit
74b9a297. The structure is still referenced in the drivers subsystem, and can
be accesseed through sysfs, so the modpost warning is a false positive. Mark
it as such.

In the same time, the warning referenced in 005bdad7 did only mention
`pci_eisa_driver', not `pci_eisa_pci_tbl', so remove its marking.

Broken-by: Arnaud Lacombe <lacombar@gmail.com> (in 005bdad7)
Reported-by: NTetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: NArnaud Lacombe <lacombar@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

   ECS A740GM-M with ATI RADEON 2100 sends data to i2c bus
   for a DVI connector that is not implemented/existent on the board.

   Fix by applying extented DDC probing for this connector.

   Requires [PATCH] drm/radeon: Extended DDC Probing for Connectors
   with Improperly Wired DDC Lines

   Tested for kernel 2.6.38 on Asus ECS A740GM-M board

   BugLink: http://bugs.launchpad.net/bugs/810926

Cc: <stable@kernel.org>
Signed-off-by: NThomas Reim <reimth@gmail.com>
Reviewed-by: NAlex Deucher <alexdeucher@gmail.com>
Acked-by: NStephen Michaels <Stephen.Micheals@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

    Log PCI subsystem vendor and subsystem device ID in addition to
    PCI vendor and device ID during kernel mode initialisation. This helps
    to better identify radeon devices of third-party vendors, e. g. for
    bug analysis.

    Tested for kernel 2.6.35, 2.6.38 and 3.0 on Asus M2A-VM HDMI board

Cc: <stable@kernel.org>
Signed-off-by: NThomas Reim <reimth@gmail.com>
Reviewed-by: NAlex Deucher <alexdeucher@gmail.com>
Acked-by: NStephen Michaels <Stephen.Micheals@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>