- 24 1月, 2007 26 次提交
-
-
由 Ishizaki Kou 提交于
This patch includes support for pci buses, base of Celleb specific devices, and etc. It works on of_platform bus. Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Ishizaki Kou 提交于
Adds Cell SCC(Super Companion Chip) definitions. Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Ishizaki Kou 提交于
This patch creates Celleb platform dependent file to define Beat hypervisor call numbers. Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Ishizaki Kou 提交于
This patch adds irq remapping hook. On interrupt mechanism on Beat, when an irq outlet which has an id which is formerly used is created, remapping the irq is required. Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Ishizaki Kou 提交于
Struct pci_controller doesn't prepare for the dependent data of each specific bus. This patch adds private member to struct pci_controller. Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Ishizaki Kou 提交于
Op_model_cell supports native Cell. By returning -EINVAL, oprofile uses timer interrupt on Cell LPAR. Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Ishizaki Kou 提交于
This patch changes handling return value of ppc_md.hpte_insert() into the same way as __hash_page_*(). Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Ishizaki Kou 提交于
spu->register_lock should be held before accessing registers. Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Adrian Bunk 提交于
Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 David Woodhouse 提交于
The system call entry code will clear the high bits of argument registers before invoking the system call; don't report whatever noise happens to be in the high bits of the register before that happens. Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Gortmaker 提交于
I suspect this was meant to be added like it was to a whole slew of other u-boot based boards, but probably just fell through the cracks. Add "select DEFAULT_UIMAGE" for the 8641/HPC-NET. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olaf Hering 提交于
Note all POWER3/POWER4 systems where fixup_winbond_82c105 will run. Signed-off-by: NOlaf Hering <olaf@aepfle.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Nathan Lynch 提交于
Identify CPC9x5 PCI Express, AGP, and HT host bridges using device_type and compatible properties, which is a more flexible method than using the name property (which can differ between firmwares and models). Signed-off-by: NNathan Lynch <ntl@pobox.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Simon Vallet 提交于
apply_relocate_add() does not support R_PPC_ADDR16_HI relocations, which prevents some non gcc-built modules to be loaded. Signed-off-by: NSimon Vallet <svallet@gmail.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Mariusz Kozlowski 提交于
Remove redundant argument check for of_node_get(). It's ok to remove 'node' check because in real life cpm2_pic_init() never gets called with node == NULL. Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Mariusz Kozlowski 提交于
No need for ?: as of_node_get() can handle NULL argument. Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> arch/powerpc/sysdev/qe_lib/qe_ic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Mariusz Kozlowski 提交于
No need for ?: because of_node_get() can handle NULL argument. Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Mariusz Kozlowski 提交于
No need for ?: because of_node_get() can handle NULL argument. Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Mariusz Kozlowski 提交于
Remove redundant argument check for of_node_put(). Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Mariusz Kozlowski 提交于
Remove redundant argument checks for of_node_get() and of_node_put(). Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michal Ostrowski 提交于
- Drivers will not rely on the PCI config space value, as they've already been conditioned to rely on the irq field in "struct pci_dev". - The virq value may not be < 256 as it has been remapped. - The PCI config space should reflect the hardware configuration, which is not being changed. We are only creating a virtual irq mapping that exists in the kernel only. One would never expect the PCI hardware to generate the "virq" interrupt. Signed-off-by: NMichal Ostrowski <mostrows@watson.ibm.com> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Anton Blanchard 提交于
I often test new versions of glibc by doing: LD_LIBRARY_PATH=/XXX/lib /XXX/lib/ld.so.1 <binary> One test case ended up SEGV'ing. Upon closer inspection ld.so was loaded at 0x8000000 (128MB) with the heap right after it. Since we normally link binaries at 0x10000000 (256MB) we only had about 128MB of space for the heap: 00100000-00103000 r-xp 00100000 00:00 0 [vdso] 08000000-0801e000 r-xp 00000000 00:01 33079 /lib/ld-2.5.so 0802d000-0802f000 rwxp 0001d000 00:01 33079 /lib/ld-2.5.so 0802f000-08050000 rwxp 0802f000 00:00 0 [heap] 0fe91000-0ffd9000 r-xp 00000000 00:01 33082 /lib/libc-2.5.so 0ffd9000-0ffe8000 ---p 00148000 00:01 33082 /lib/libc-2.5.so 0ffe8000-0ffea000 r--p 00147000 00:01 33082 /lib/libc-2.5.so 0ffea000-0ffed000 rwxp 00149000 00:01 33082 /lib/libc-2.5.so 10000000-10004000 r-xp 00000000 00:01 76 /bin/sleep 10013000-10014000 rwxp 00003000 00:01 76 /bin/sleep ffb41000-ffb56000 rw-p ffb41000 00:00 0 [stack] One way to fix this is move ELF_ET_DYN_BASE from 0x08000000 to 0x20000000. This allows 128MB for the binary (hopefully enough for even the most crazy c++ apps), and with our current layout we will grow the heap up and the stack down, allowing potentially gigabytes of heap: 00100000-00103000 r-xp 00100000 00:00 0 [vdso] 0fe8a000-0ffd3000 r-xp 00000000 00:01 3350 /lib/tls/libc-2.3.6.so 0ffd3000-0ffe3000 ---p 00149000 00:01 3350 /lib/tls/libc-2.3.6.so 0ffe3000-0ffea000 r--p 00149000 00:01 3350 /lib/tls/libc-2.3.6.so 0ffea000-0ffee000 rwxp 00150000 00:01 3350 /lib/tls/libc-2.3.6.so 10000000-10004000 r-xp 00000000 00:01 76 /bin/sleep 10013000-10014000 rwxp 00003000 00:01 76 /bin/sleep 20000000-20018000 r-xp 00000000 00:01 3478 /lib/ld-2.3.6.so 20028000-20029000 r--p 00018000 00:01 3478 /lib/ld-2.3.6.so 20029000-2002a000 rwxp 00019000 00:01 3478 /lib/ld-2.3.6.so 2002a000-2004b000 rwxp 2002a000 00:00 0 [heap] ffd67000-ffd7c000 rw-p ffd67000 00:00 0 [stack] Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Linas Vepstas 提交于
Clarify error message re EEH permanent failure. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Akinobu Mita 提交于
Use is_init() rather than hard coded pid comparison. Cc: Anton Blanchard <anton@samba.org> Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geert Uytterhoeven 提交于
ps3_free_io_irq: Fix inverted error check after calling lv1_destruct_io_irq_outlet(). Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geert Uytterhoeven 提交于
Allow to build a uniprocessor kernel for PS3. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 23 1月, 2007 14 次提交
-
-
由 James Bottomley 提交于
The current PDA code, which went in in post 2.6.19 has a flaw in that it doesn't correctly cycle the GDT and %GS segment through the boot PDA, the CPU PDA and finally the per-cpu PDA. The bug generally doesn't show up if the boot CPU id is zero, but everything falls apart for a non zero boot CPU id. The basically kills voyager which is perfectly capable of doing non zero CPU id boots, so voyager currently won't boot without this. The fix is to be careful and actually do the GDT setups correctly. Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com> Cc: Andi Kleen <ak@suse.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Andrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/mtd-2.6由 Linus Torvalds 提交于
* git://git.infradead.org/mtd-2.6: (84 commits) [JFFS2] debug.h: include <linux/sched.h> for current->pid [MTD] OneNAND: Handle DDP chip boundary during read-while-load [MTD] OneNAND: return ecc error code only when 2-bit ecc occurs [MTD] OneNAND: Implement read-while-load [MTD] OneNAND: fix onenand_wait bug in read ecc error [MTD] OneNAND: release CPU in cycles [MTD] OneNAND: add subpage write support [MTD] OneNAND: fix onenand_wait bug [JFFS2] use the ref_offset macro [JFFS2] Reschedule in loops [JFFS2] Fix error-path leak in summary scan [JFFS2] add cond_resched() when garbage collecting deletion dirent [MTD] Nuke IVR leftovers [MTD] OneNAND: fix oob handling in recent oob patch [MTD] Fix ssfdc blksize typo [JFFS2] replace kmalloc+memset with kzalloc [MTD] Fix SSFDC build for variable blocksize. [MTD] ESB2ROM uses PCI [MTD] of_device-based physmap driver [MTD] Support combined RedBoot FIS directory and configuration area ...
-
由 Herbert Xu 提交于
Both "=r" and "=g" breaks my build on i386: $ make CC [M] drivers/kvm/vmx.o {standard input}: Assembler messages: {standard input}:3318: Error: bad register name `%sil' make[1]: *** [drivers/kvm/vmx.o] Error 1 make: *** [_module_drivers/kvm] Error 2 The reason is that setbe requires an 8-bit register but "=r" does not constrain the target register to be one that has an 8-bit version on i386. According to http://gcc.gnu.org/bugzilla/show_bug.cgi?id=10153 the correct constraint is "=q". Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: PCI: fix pci-driver kernel-doc PCI: rework Documentation/pci.txt PCI: Unhide the SMBus on the Asus P4P800-X
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: unusual_devs.h entry for nokia 6233 USB: Fix for typo in ohci-ep93xx.c USB: disable USB_MULTITHREAD_PROBE USB: add vendor/device id for Option GT Max 3.6 cards USB: unusual_devs.h for 0x046b:ff40 USB: make usbhid ignore Imation Disc Stakka USB: rndis_host: fix crash while probing a Nokia S60 mobile USB: asix: Detect internal PHY and enable/use accordingly usbtouchscreen: make ITM screens report BTN_TOUCH as zero when not touched
-
由 Randy Dunlap 提交于
Function short description should be on only one line. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Grant Grundler 提交于
Rewrite Documentation/pci.txt: o restructure document to match how API is used when writing init code. o update to reflect changes in struct pci_driver function pointers. o removed language on "new style vs old style" device discovery. "Old style" is now deprecated. Don't use it. Left description in to document existing driver behaviors. o add section "Legacy I/O Port free driver" by Kenji Kaneshige http://lkml.org/lkml/2006/11/22/25 (renamed to "pci_enable_device_bars() and Legacy I/O Port space") o add "MMIO space and write posting" section to help avoid common pitfall when converting drivers from IO Port space to MMIO space. Orignally posted http://lkml.org/lkml/2006/2/27/24 o many typo/grammer/spelling corrections from Randy Dunlap o two more spelling corrections from Stephan Richter o fix CodingStyle as per Randy Dunlap Signed-off-by: NGrant Grundler <grundler@parisc-linux.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
Unhide the SMBus on the Asus P4P800-X (and probably some other models of the family.) This gives access to the memory module SPD EEPROMs. Thanks to Winbond for supporting the lm-sensors project with the donation of this motherboard. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Manuel Osdoba 提交于
In appendix a patch for the nokia 6233 mobile phone is included. The patch is against 2.6.20-rc5. It is my first patch. Hopefully it has the right format. The code makes my nokia 6233 on my computer work. From: Manuel Osdoba <manuel.osdoba@tu-ilmenau.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Petr Stetiar 提交于
Attached patch fixes typo in USB driver reported by Chase Douglas on linux-cirrus mailing list. http://www.freelists.org/archives/linux-cirrus/12-2006/msg00003.htmlSigned-off-by: NPetr Stetiar <ynezz@true.cz> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Disable the USB_MULTITHREAD_PROBE option because it causes crashes on people's machines and they never remember to actually read the config help files. No one likes this, everyone hates it, I'm going to go eat worms... The full logic will be ripped out later. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
This fixes http://bugzilla.kernel.org/show_bug.cgi?id=7814Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Pete Zaitcev 提交于
American Megatrends did something wrong in their floppy emulator. It breaks with both kinds of MODE SENSE which our stack sends. Alan and I tried a few tweaks, and got LUNs sensed right, but US_FL_NO_WP_DETECT is still needed. I set the firmware bracket to 1.00 exactly, in case AMI or Sun fix it with a firmware update. Hey, you never know. Signed-off-by: NPete Zaitcev <zaitcev@redhat.com> Signed-off-by: NPhil Dibowitz <phil@ipom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
on request of the sourceforge project for this device, a kind of robotized CD storage, it should be ignored by the generic driver. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-