- 10 8月, 2015 4 次提交
-
-
由 Vivien Didelot 提交于
Remove the fdb_{add,del,getnext} function pointer in favor of new port_fdb_{add,del,getnext}. Implement the switchdev_port_obj_{add,del,dump} functions in DSA to support the SWITCHDEV_OBJ_PORT_FDB objects. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
This patch adds a is_static boolean to the switchdev_obj_fdb structure, in order to set the ndm_state to either NUD_NOARP or NUD_REACHABLE. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
The address in the switchdev_obj_fdb structure is currently represented as a pointer. Replacing it for a 6-byte array allows switchdev to carry addresses directly read from hardware registers, not stored by the switch chip driver (as in Rocker). Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Masanari Iida 提交于
This patch fix a double word "the the" in Documentation/DocBook/networking.xml and Documentation/DocBook/networking/API-Wimax-report-rfkill-sw.html. These files are generated from comment in source, so I had to fix the typo in net/wimax/io-rfkill.c Signed-off-by: NMasanari Iida <standby24x7@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 8月, 2015 6 次提交
-
-
由 Tom Herbert 提交于
There is a race condition in store_rps_map that allows jump label count in rps_needed to go below zero. This can happen when concurrently attempting to set and a clear map. Scenario: 1. rps_needed count is zero 2. New map is assigned by setting thread, but rps_needed count _not_ yet incremented (rps_needed count still zero) 2. Map is cleared by second thread, old_map set to that just assigned 3. Second thread performs static_key_slow_dec, rps_needed count now goes negative Fix is to increment or decrement rps_needed under the spinlock. Signed-off-by: NTom Herbert <tom@herbertland.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wenyu Zhang 提交于
When sampling rate is 1, the sampling probability is UINT32_MAX. The packet should be sampled even the prandom32() generate the number of UINT32_MAX. And none packet need be sampled when the probability is 0. Signed-off-by: NWenyu Zhang <wenyuz@vmware.com> Acked-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexei Starovoitov 提交于
IFLA_VXLAN_FLOWBASED is useless without IFLA_VXLAN_COLLECT_METADATA, so combine them into single IFLA_VXLAN_COLLECT_METADATA flag. 'flowbased' doesn't convey real meaning of the vxlan tunnel mode. This mode can be used by routing, tc+bpf and ovs. Only ovs is strictly flow based, so 'collect metadata' is a better name for this tunnel mode. Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com> Acked-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Sowmini Varadhan says: ==================== RDS-TCP: Network namespace support This patch series contains the set of changes to correctly set up the infra for PF_RDS sockets that use TCP as the transport in multiple network namespaces. Patch 1 in the series is the minimal set of changes to allow a single instance of RDS-TCP to run in any (i.e init_net or other) net namespace. The changes in this patch set ensure that the execution of 'modprobe [-r] rds_tcp' sets up the kernel TCP sockets relative to the current netns, so that RDS applications can send/recv packets from that netns, and the netns can later be deleted cleanly. Patch 2 of the series further allows multiple RDS-TCP instances, one per network namespace. The changes in this patch allows dynamic creation/tear-down of RDS-TCP client and server sockets across all current and future namespaces. v2 changes from RFC sent out earlier: David Ahern comments in patch 1, net_device notifier in patch 2, patch 3 broken off and submitted separately. v3: Cong Wang review comments. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
Register pernet subsys init/stop functions that will set up and tear down per-net RDS-TCP listen endpoints. Unregister pernet subusys functions on 'modprobe -r' to clean up these end points. Enable keepalive on both accept and connect socket endpoints. The keepalive timer expiration will ensure that client socket endpoints will be removed as appropriate from the netns when an interface is removed from a namespace. Register a device notifier callback that will clean up all sockets (and thus avoid the need to wait for keepalive timeout) when the loopback device is unregistered from the netns indicating that the netns is getting deleted. Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
Open the sockets calling sock_create_kern() with the correct struct net pointer, and use that struct net pointer when verifying the address passed to rds_bind(). Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 8月, 2015 30 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue由 David S. Miller 提交于
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-08-05 This series contains updates to i40e, i40evf and e1000e. Anjali adds support for x772 devices to i40e and i40evf. With the added support, x772 supports offloading of the outer UDP transmit and receive checksum for tunneled packets. Also supports evicting ATR filters in the hardware, so update the driver with this new feature set. Raanan provides several fixes for e1000e, first rectifies the Energy Efficient Ethernet in Sx code so that it only applies to parts that actually support EEE in Sx. Fix whitespace and moved ICH8 related define to the proper context. Fixed the ASPM locking which was reported by Bjorn Helgaas. Fix a workaround implementation for systime which could experience a large non-linear increment of the systime value when checking for overflow. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jason A. Donenfeld 提交于
The pr_debug family of functions turns into a no-op when -DDEBUG is not specified, opting instead to call "no_printk", which gets compiled to a no-op (but retains gcc's nice warnings about printf-style arguments). The problem with net_dbg_ratelimited is that it is defined to be a variant of net_ratelimited_function, which expands to essentially: if (net_ratelimit()) pr_debug(fmt, ...); When DEBUG is not defined, then this becomes, if (net_ratelimit()) ; This seems benign, except it isn't. Firstly, there's the obvious overhead of calling net_ratelimit needlessly, which does quite some book keeping for the rate limiting. Given that the pr_debug and net_dbg_ratelimited family of functions are sprinkled liberally through performance critical code, with developers assuming they'll be compiled out to a no-op most of the time, we certainly do not want this needless book keeping. Secondly, and most visibly, even though no debug message is printed when DEBUG is not defined, if there is a flood of invocations, dmesg winds up peppered with messages such as "net_ratelimit: 320 callbacks suppressed". This is because our aforementioned net_ratelimit() function actually prints this text in some circumstances. It's especially odd to see this when there isn't any other accompanying debug message. So, in sum, it doesn't make sense to have this function's current behavior, and instead it should match what every other debug family of functions in the kernel does with !DEBUG -- nothing. This patch replaces calls to net_dbg_ratelimited when !DEBUG with no_printk, keeping with the idiom of all the other debug print helpers. Also, though not strictly neccessary, it guards the call with an if (0) so that all evaluation of any arguments are sure to be compiled out. Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roopa Prabhu 提交于
This patch adds null dev check for the 'cfg->rc_via_table == NEIGH_LINK_TABLE or dev_get_by_index() failed' case Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Nicolas Schichan says: ==================== test_bpf improvements Please find below the patch series with my latest changes to test_bpf. The first patch checks for unexpected NULL generated skbs before running the filter. The second patch adds the possibility for tests to generate fragmented skbs. The third patch tests LD_ABS and LD_IND on fragmented skbs. The fourth patch adds the possibility to restrict the tests being run by specifying the name/id/range of the test(s) to run via module parameters. The fifth patch tests LD_ABS and LD_IND on non fragmented skbs with various sizes and alignments. The sixth and final patch checks that the interpreter or JIT correctly resets A and X to 0. This serie is against today's net-next tree. Changes in V2: * move declaration of 'ptr' in if() block in patch 2/6. * fix various typos in patch 4/6 * rework default init of test_range array and cleanup exclude_test() return condition in patch 4/6. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Schichan 提交于
It is mandatory for the JIT or interpreter to reset the A and X registers to 0 before running the filter. Check that it is the case on various ALU and JMP instructions. Signed-off-by: NNicolas Schichan <nschichan@freebox.fr> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Schichan 提交于
This exerces the LD_ABS and LD_IND instructions for various sizes and alignments. This also checks that X when used as an offset to a BPF_IND instruction first in a filter is correctly set to 0. Signed-off-by: NNicolas Schichan <nschichan@freebox.fr> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Schichan 提交于
When developping on the interpreter or a particular JIT, it can be interesting to restrict the tests list to a specific test or a particular range of tests. This patch adds the following module parameters to the test_bpf module: * test_name=<string>: only the specified named test will be run. * test_id=<number>: only the test with the specified id will be run (see the output of test_bpf without parameters to get the test id). * test_range=<number>,<number>: only the tests within IDs in the specified id range are run (see the output of test_bpf without parameters to get the test ids). Any invalid range, test id or test name will result in -EINVAL being returned and no tests being run. Signed-off-by: NNicolas Schichan <nschichan@freebox.fr> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Schichan 提交于
These new tests exercise various load sizes and offsets crossing the head/fragment boundary. Signed-off-by: NNicolas Schichan <nschichan@freebox.fr> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Schichan 提交于
This introduce a new test->aux flag (FLAG_SKB_FRAG) to tell the populate_skb() function to add a fragment to the test skb containing the data specified in test->frag_data). Signed-off-by: NNicolas Schichan <nschichan@freebox.fr> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Schichan 提交于
Signed-off-by: NNicolas Schichan <nschichan@freebox.fr> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Amir Vadai says: ==================== net/mlx5e: Driver updates 04-Aug-2015 This patchset introduces two features to the ConnectX-4 driver: Patch 8/8 ("Support physical port counters") exposes some hardware counters through ethtool. Rest of the patches are preparation and usage of what we call light-weight netdev open/close. Some flows that used to be in the ndo_open/stop are moved to the PCI probe/remove flows - i.e. we will make the netdev open/close operations more "light-weight". The benefits of this change are: 1) Reduce the execution time of the stop/open operations. 2) Avoid saving SW shadows of resource configurations that must persist through stop/open operations (e.g flow table steering rules), and avoid deleting/applying them from/to the device upon netdev stop/open. 3) Avoid synchronizing threads that access those resources with the netdev stop/open threads. Instead of create/destroy the resource during netdev open/stop, This patchset changes the behavior such that upon netdev stop, traffic is redirected to a "Drop RQ" (a RQ that silently drops, at the NIC HW level all incoming traffic). After redirecting the traffic, RX/TX software resources could be destroyed. During netdev open, the RX/TX rings are created and traffic is redirected to the RX rings. Patchset was applied and tested over commit ba7591d8 ("ebpf: add skb->hash to offset map for usage in {cls, act}_bpf or filters") ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gal Pressman 提交于
Added physical port counters in the following standard formats to ethtool statistics: - IEEE 802.3 - RFC2863 - RFC2819 Signed-off-by: NGal Pressman <galp@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Achiad Shochat 提交于
Now that TIRs, TISs and flow tables are kept alive while the netdev is stopped (after executing ndo_stop()) we can do the following improvements: - Obsolete the active_vlans SW shadow. - Do not delete/add flow table rules upon ndo_stop/open. In addition to simplifying the flow, this change also fastens the ndo_open/close operations. - Obsolete synchronization of threads accessing the flow tables with the netdev stop/open threads. Signed-off-by: NAchiad Shochat <achiad@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Achiad Shochat 提交于
It does not make sense to allow events while the netdev is unregistered. Signed-off-by: NAchiad Shochat <achiad@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Achiad Shochat 提交于
Rename some functions that used to be invoked upon ndo_open/stop and are now invoked upon create/destroy_netdev() in order to better hint their place in the flow. Change some functions location in the file so that functions involved in ndo_open/stop flow will not be interleaved with other functions. This is a cosmetic change, no logical change here. Signed-off-by: NAchiad Shochat <achiad@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Achiad Shochat 提交于
Create/destroy TIRs, TISs and flow tables upon PCI probe/remove rather than upon the netdev ndo_open/stop. Upon ndo_stop(), redirect all RX traffic to the (lately introduced) "Drop RQ" and then close only the RX/TX rings, leaving the TIRs, TISs and flow tables alive. Signed-off-by: NAchiad Shochat <achiad@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Achiad Shochat 提交于
To be used by the mlx5 Eth driver in following commit. This is in preparation for netdev "light-weight" open/stop flow change described in previous commit. Signed-off-by: NAchiad Shochat <achiad@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Achiad Shochat 提交于
RX traffic routed to this RQ will be silently dropped, at the NIC HW level. This is in preparation for netdev "light-weight" open/stop flow change described in previous commit. Signed-off-by: NAchiad Shochat <achiad@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Achiad Shochat 提交于
Generally an RX packet flows through the following objects: Flow table --> TIR --> RQT --> RQ Where: - TIR stands for "Transport Interface Receive", defining the RSS and LRO paramaters. - RQT stands for "RQ Table", implementing the RSS indirection table. - RQ stands for "Receive Queue" For flows that do not need LRO, nor RSS, the driver made a shortcut to the above RX flow by pointing to the RQ directly from the TIR, yielding this flow: Flow table --> TIR --> RQ In this commit we remove this shortcut by "inserting" a single-RQ RQT between the TIR and the RQ, i.e RX packets will reach the same RQ but will go through an RQT of size 1, pointing to just a single RQ. This way the RX traffic re-direction to/from the "Drop RQ" will be more uniform (AKA "one flow"), as it will involve only RQTs re-direction and no TIRs re-direction. Signed-off-by: NAchiad Shochat <achiad@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Mugunthan V N says: ==================== CPSW interrupt handling cleanup and performance improvement This patch series removes the irq controller disable interrupt and adding a napi for tx event handling which improves the performance by ~180Mbps on dra7-evm [ 5] local 192.168.10.116 port 5001 connected with 192.168.10.165 port 44176 [ 5] 0.0-60.0 sec 1.48 GBytes 210 Mbits/sec [ 4] local 192.168.10.116 port 5001 connected with 192.168.10.165 port 33257 [ 4] 0.0-60.0 sec 2.71 GBytes 386 Mbits/sec Changes from initial version: * Added a patch to have napi only for first interface as there is no use of having seperate napis for each interface as the interrupt is shared by both interface and only one napi is scheduled for each interrupt. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mugunthan V N 提交于
Instead of processing tx events in isr adding separate napi for tx which improves performance by ~180Mbps with omap2plus_defconfig on DRA74x platform. Also cleaning up rx napis by renaming to napi_rx for better understanding the code. Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mugunthan V N 提交于
Since interrupt is shared between the two ethernet interface and in isr only one napi is scheduled at an instance so having two napis doesn't make any difference. So making napi also as a common resource for the dual ethernet interfaces. Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mugunthan V N 提交于
CPSW interrupts can be disabled by masking CPSW interrupts and clearing interrupt by writing appropriate EOI. So removing all disable_irq/enable_irq as discussed in [1] [1] http://patchwork.ozlabs.org/patch/492741/Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
We recently changed this code from returning NULL to returning ERR_PTR. There are some left over NULL assignments which we can remove. We can preserve the error code from ip_route_output() instead of always returning -ENODEV. Also these functions use a mix of gotos and direct returns. There is no cleanup necessary so I changed the gotos to direct returns. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Acked-by: NRobert Shearman <rshearma@brocade.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Yuval Mintz says: ==================== bnx2x, cnic, bnx2fc: add support for BD Commit 230d00eb ("bnx2x: new Multi-function mode - BD") added support for a new multi-function mode, but it added only the support required by bnx2x for L2 interfaces. This adds the required changes to support the new multi-function mode in the offloaded storage protocols. Dave, Please consider applying this series to `net-next'. Do notice that this involves non-networking driver changes - but sending this as a single series seemed like the best approach as we had to have bnx2x changes to support the new functionality. If this is problematic, please tell us what's the preferred solution here. Changes from previous versions ------------------------------ - From v1 - no actual changes; v1 failed to reach netdev so in order to keep things in line I've termed this one v2. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Carnuccio 提交于
Signed-off-by: NJoe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Commit 230d00eb ("bnx2x: new Multi-function mode - BD") adds support for the new mode in bnx2x. This expands this support by implementing APIs required by our storage drivers to support that mode. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adheer Chandravanshi 提交于
Signed-off-by: NAdheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tej Parkash 提交于
Signed-off-by: NTej Parkash <tej.parkash@qlogic.com> Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Scott Feldman 提交于
After successful register_netdev, we can use netdev_err rather the more generic dev_err. Signed-off-by: NScott Feldman <sfeldma@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-