- 13 1月, 2009 1 次提交
-
-
由 Yossi Etigin 提交于
Because the ipoib_workqueue is not flushed when ipoib interface is brought down, ipoib_mcast_join() may trigger a join to the broadcast group after priv->broadcast was set to NULL (during cleanup). This will cause the system to be a member of the broadcast group when interface is down. As a side effect, this breaks the optimization of setting the Q_key only when joining the broadcast group. Signed-off-by: NYossi Etigin <yosefe@voltaire.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 10 1月, 2009 1 次提交
-
-
由 Yossi Etigin 提交于
Fix bonding failover in the case both peers failover and the gratuitous ARP is lost. In that case, the sender side will create an ipoib_neigh and issue a path request with the old GID first. When skb->dst->neighbour->ha changes due to ARP refresh, this ipoib_neigh will not be added to the path->list of the path of the new GID, because the ipoib_neigh already exists. It will not have an AH either, because of sender-side failover. Therefore, it will not get an AH when the path is resolved. The solution here is to compare GIDs in ipoib_start_xmit() even if neigh->ah is invalid. Comparing with an uninitialized value of neigh->dgid should be fine, since a spurious match is harmless (and astronomically unlikely too). Signed-off-by: NMoni Shoua <monis@voltaire.com> Signed-off-by: NYossi Etigin <yosefe@voltaire.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 31 12月, 2008 30 次提交
-
-
git://oss.sgi.com/xfs/xfs由 Linus Torvalds 提交于
* 'for-linus' of git://oss.sgi.com/xfs/xfs: (184 commits) [XFS] Fix race in xfs_write() between direct and buffered I/O with DMAPI [XFS] handle unaligned data in xfs_bmbt_disk_get_all [XFS] avoid memory allocations in xfs_fs_vcmn_err [XFS] Fix speculative allocation beyond eof [XFS] Remove XFS_BUF_SHUT() and friends [XFS] Use the incore inode size in xfs_file_readdir() [XFS] set b_error from bio error in xfs_buf_bio_end_io [XFS] use inode_change_ok for setattr permission checking [XFS] add a FMODE flag to make XFS invisible I/O less hacky [XFS] resync headers with libxfs [XFS] simplify projid check in xfs_rename [XFS] replace b_fspriv with b_mount [XFS] Remove unused tracing code [XFS] Remove unnecessary assertion [XFS] Remove unused variable in ktrace_free() [XFS] Check return value of xfs_buf_get_noaddr() [XFS] Fix hang after disallowed rename across directory quota domains [XFS] Fix compile with CONFIG_COMPAT enabled move inode tracing out of xfs_vnode. move vn_iowait / vn_iowake into xfs_aops.c ...
-
git://git.linux-nfs.org/projects/trondmy/nfs-2.6由 Linus Torvalds 提交于
* git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (70 commits) fs/nfs/nfs4proc.c: make nfs4_map_errors() static rpc: add service field to new upcall rpc: add target field to new upcall nfsd: support callbacks with gss flavors rpc: allow gss callbacks to client rpc: pass target name down to rpc level on callbacks nfsd: pass client principal name in rsc downcall rpc: implement new upcall rpc: store pointer to pipe inode in gss upcall message rpc: use count of pipe openers to wait for first open rpc: track number of users of the gss upcall pipe rpc: call release_pipe only on last close rpc: add an rpc_pipe_open method rpc: minor gss_alloc_msg cleanup rpc: factor out warning code from gss_pipe_destroy_msg rpc: remove unnecessary assignment NFS: remove unused status from encode routines NFS: increment number of operations in each encode routine NFS: fix comment placement in nfs4xdr.c NFS: fix tabs in nfs4xdr.c ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/mlx4: Fix reading SL field out of cqe->sl_vid RDMA/addr: Fix build breakage when IPv6 is disabled
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (104 commits) [SCSI] fcoe: fix configuration problems [SCSI] cxgb3i: fix select/depend problem [SCSI] fcoe: fix incorrect use of struct module [SCSI] cxgb3i: remove use of skb->sp [SCSI] cxgb3i: Add cxgb3i iSCSI driver. [SCSI] zfcp: Remove unnecessary warning message [SCSI] zfcp: Add support for unchained FSF requests [SCSI] zfcp: Remove busid macro [SCSI] zfcp: remove DID_DID flag [SCSI] zfcp: Simplify mask lookups for incoming RSCNs [SCSI] zfcp: Remove initial device data from zfcp_data [SCSI] zfcp: fix compile warning [SCSI] zfcp: Remove adapter list [SCSI] zfcp: Simplify SBAL allocation to fix sparse warnings [SCSI] zfcp: register with SCSI layer on ccw registration [SCSI] zfcp: Fix message line break [SCSI] qla2xxx: changes in multiq code [SCSI] eata: fix the data buffer accessors conversion regression [SCSI] ibmvfc: Improve async event handling [SCSI] lpfc : correct printk types on PPC compiles ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (583 commits) V4L/DVB (10130): use USB API functions rather than constants V4L/DVB (10129): dvb: remove deprecated use of RW_LOCK_UNLOCKED in frontends V4L/DVB (10128): modify V4L documentation to be a valid XHTML V4L/DVB (10127): stv06xx: Avoid having y unitialized V4L/DVB (10125): em28xx: Don't do AC97 vendor detection for i2s audio devices V4L/DVB (10124): em28xx: expand output formats available V4L/DVB (10123): em28xx: fix reversed definitions of I2S audio modes V4L/DVB (10122): em28xx: don't load em28xx-alsa for em2870 based devices V4L/DVB (10121): em28xx: remove worthless Pinnacle PCTV HD Mini 80e device profile V4L/DVB (10120): em28xx: remove redundant Pinnacle Dazzle DVC 100 profile V4L/DVB (10119): em28xx: fix corrupted XCLK value V4L/DVB (10118): zoran: fix warning for a variable not used V4L/DVB (10116): af9013: Fix gcc false warnings V4L/DVB (10111a): usbvideo.h: remove an useless blank line V4L/DVB (10111): quickcam_messenger.c: fix a warning V4L/DVB (10110): v4l2-ioctl: Fix warnings when using .unlocked_ioctl = __video_ioctl2 V4L/DVB (10109): anysee: Fix usage of an unitialized function V4L/DVB (10104): uvcvideo: Add support for video output devices V4L/DVB (10102): uvcvideo: Ignore interrupt endpoint for built-in iSight webcams. V4L/DVB (10101): uvcvideo: Fix bulk URB processing when the header is erroneous ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: net: Fix percpu counters deadlock cpumask: prepare for iterators to only go to nr_cpu_ids/nr_cpumask_bits: net drivers/net/usb: use USB API functions rather than constants cls_cgroup: clean up Kconfig cls_cgroup: clean up for cgroup part cls_cgroup: fix an oops when removing a cgroup EtherExpress16: fix printing timed out status mlx4_en: Added "set_ringparam" Ethtool interface implementation mlx4_en: Always allocate RX ring for each interrupt vector mlx4_en: Verify number of RX rings doesn't exceed MAX_RX_RINGS IPVS: Make "no destination available" message more consistent between schedulers net: KS8695: removed duplicated #include tun: Fix SIOCSIFHWADDR error. smsc911x: compile fix re netif_rx signature changes netns: foreach_netdev_safe is insufficient in default_device_exit net: make xfrm_statistics_seq_show use generic snmp_fold_field net: Fix more NAPI interface netdev argument drop fallout. net: Fix unused variable warnings in pasemi_mac.c and spider_net.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: lguest: struct device - replace bus_id with dev_name() lguest: move the initial guest page table creation code to the host kvm-s390: implement config_changed for virtio on s390 virtio_console: support console resizing virtio: add PCI device release() function virtio_blk: fix type warning virtio: block: dynamic maximum segments virtio: set max_segment_size and max_sectors to infinite. virtio: avoid implicit use of Linux page size in balloon interface virtio: hand virtio ring alignment as argument to vring_new_virtqueue virtio: use KVM_S390_VIRTIO_RING_ALIGN instead of relying on pagesize virtio: use LGUEST_VRING_ALIGN instead of relying on pagesize virtio: Don't use PAGE_SIZE for vring alignment in virtio_pci. virtio: rename 'pagesize' arg to vring_init/vring_size virtio: Don't use PAGE_SIZE in virtio_pci.c virtio: struct device - replace bus_id with dev_name(), dev_set_name() virtio-pci queue allocation not page-aligned
-
由 Linus Torvalds 提交于
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (407 commits) [ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devices [ARM] pxafb: cleanup of the timing checking code [ARM] pxafb: cleanup of the color format manipulation code [ARM] pxafb: add palette format support for LCCR4_PAL_FOR_3 [ARM] pxafb: add support for FBIOPAN_DISPLAY by dma braching [ARM] pxafb: allow pxafb_set_par() to start from arbitrary yoffset [ARM] pxafb: allow video memory size to be configurable [ARM] pxa: add document on the MFP design and how to use it [ARM] sa1100_wdt: don't assume CLOCK_TICK_RATE to be a constant [ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constant [ARM] pxa/tavorevb: update board support (smartpanel LCD + keypad) [ARM] pxa: Update eseries defconfig [ARM] 5352/1: add w90p910-plat config file [ARM] s3c: S3C options should depend on PLAT_S3C [ARM] mv78xx0: implement GPIO and GPIO interrupt support [ARM] Kirkwood: implement GPIO and GPIO interrupt support [ARM] Orion: share GPIO IRQ handling code [ARM] Orion: share GPIO handling code [ARM] s3c: define __io using the typesafe version [ARM] S3C64XX: Ensure CPU_V6 is selected ...
-
由 Huang Weiyi 提交于
Removed duplicated #include in kernel/trace/trace.c. Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (33 commits) ide-cd: remove dead dsc_overlap setting ide: push local_irq_{save,restore}() to do_identify() ide: remove superfluous local_irq_{save,restore}() from ide_dump_status() ide: move legacy ISA/VLB ports handling to ide-legacy.c (v2) ide: move Power Management support to ide-pm.c ide: use ATA_DMA_* defines in ide-dma-sff.c ide: checkpatch.pl fixes for ide-lib.c ide: remove inline tags from ide-probe.c ide: remove redundant code from ide_end_drive_cmd() ide: struct device - replace bus_id with dev_name(), dev_set_name() ide: rework handling of serialized ports (v2) cy82c693: remove superfluous ide_cy82c693 chipset type trm290: add IDE_HFLAG_TRM290 host flag ide: add ->max_sectors field to struct ide_port_info rz1000: apply chipset quirks early (v2) ide: always set nIEN on idle devices ide: fix ->quirk_list checking in ide_do_request() gayle: set IDE_HFLAG_SERIALIZE explictly cmd64x: set IDE_HFLAG_SERIALIZE explictly for CMD646 ali14xx: doesn't use shared IRQs ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6: jfs: ensure symlinks are NUL-terminated
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: sata_sil: add Large Block Transfer support [libata] ata_piix: cleanup dmi strings checking DMI: add dmi_match libata: blacklist NCQ on OCZ CORE 2 SSD (resend) [libata] Update kernel-doc comments to match source code libata: perform port detach in EH libata: when restoring SControl during detach do the PMP links first libata: beef up iterators
-
由 Linus Torvalds 提交于
Merge branch 'oprofile-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'oprofile-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: oprofile: select RING_BUFFER ring_buffer: adding EXPORT_SYMBOLs oprofile: fix lost sample counter oprofile: remove nr_available_slots() oprofile: port to the new ring_buffer ring_buffer: add remaining cpu functions to ring_buffer.h oprofile: moving cpu_buffer_reset() to cpu_buffer.h oprofile: adding cpu_buffer_entries() oprofile: adding cpu_buffer_write_commit() oprofile: adding cpu buffer r/w access functions ftrace: remove unused function arg in trace_iterator_increment() ring_buffer: update description for ring_buffer_alloc() oprofile: set values to default when creating oprofilefs oprofile: implement switch/case in buffer_sync.c x86/oprofile: cleanup IBS init/exit functions in op_model_amd.c x86/oprofile: reordering IBS code in op_model_amd.c oprofile: fix typo oprofile: whitspace changes only oprofile: update comment for oprofile_add_sample() oprofile: comment cleanup
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: slub: avoid leaking caches or refcounts on sysfs error slab: Fix comment on #endif slab: remove GFP_THISNODE clearing from alloc_slabmgmt() slub: Add might_sleep_if() to slab_alloc() SLUB: failslab support slub: Fix incorrect use of loose slab: Update the kmem_cache_create documentation regarding the name parameter slub: make early_kmem_cache_node_alloc void slab: unsigned slabp->inuse cannot be less than 0 slub - fix get_object_page comment SLUB: Replace __builtin_return_address(0) with _RET_IP_. SLUB: cleanup - define macros instead of hardcoded numbers
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (37 commits) drm/i915: fix modeset devname allocation + agp init return check. drm/i915: Remove redundant test in error path. drm: Add a debug node for vblank state. drm: Avoid use-before-null-test on dev in drm_cleanup(). drm/i915: Don't print to dmesg when taking signal during object_pin. drm: pin new and unpin old buffer when setting a mode. drm/i915: un-EXPORT and make 'intelfb_panic' static drm/i915: Delete unused, pointless i915_driver_firstopen. drm/i915: fix sparse warnings: returning void-valued expression drm/i915: fix sparse warnings: move 'extern' decls to header file drm/i915: fix sparse warnings: make symbols static drm/i915: fix sparse warnings: declare one-bit bitfield as unsigned drm/i915: Don't double-unpin buffers if we take a signal in evict_everything(). drm/i915: Fix fbcon setup to align display pitch to 64b. drm/i915: Add missing userland definitions for gem init/execbuffer. i915/drm: provide compat defines for userspace for certain struct members. drm: drop DRM_IOCTL_MODE_REPLACEFB, add+remove works just as well. drm: sanitise drm modesetting API + remove unused hotplug drm: fix allowing master ioctls on non-master fds. drm/radeon: use locked rmmap to remove sarea mapping. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6由 Linus Torvalds 提交于
* 'agp-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6: agp/intel: Fix broken ® symbol in device name. agp/intel: add support for G41 chipset
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6: (98 commits) sparc: move select of ARCH_SUPPORTS_MSI sparc: drop SUN_IO sparc: unify sections.h sparc: use .data.init_task section for init_thread_union sparc: fix array overrun check in of_device_64.c sparc: unify module.c sparc64: prepare module_64.c for unification sparc64: use bit neutral Elf symbols sparc: unify module.h sparc: introduce CONFIG_BITS sparc: fix hardirq.h removal fallout sparc64: do not export pus_fs_struct sparc: use sparc64 version of scatterlist.h sparc: Commonize memcmp assembler. sparc: Unify strlen assembler. sparc: Add asm/asm.h sparc: Kill memcmp_32.S code which has been ifdef'd out for centuries. sparc: replace for_each_cpu_mask_nr with for_each_cpu sparc: fix sparse warnings in irq_32.c sparc: add include guards to kernel.h ...
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-2.6.29' of git://git.kernel.dk/linux-2.6-block: (43 commits) bio: get rid of bio_vec clearing bounce: don't rely on a zeroed bio_vec list cciss: simplify parameters to deregister_disk function cfq-iosched: fix race between exiting queue and exiting task loop: Do not call loop_unplug for not configured loop device. loop: Flush possible running bios when loop device is released. alpha: remove dead BIO_VMERGE_BOUNDARY Get rid of CONFIG_LSF block: make blk_softirq_init() static block: use min_not_zero in blk_queue_stack_limits block: add one-hit cache for disk partition lookup cfq-iosched: remove limit of dispatch depth of max 4 times quantum nbd: tell the block layer that it is not a rotational device block: get rid of elevator_t typedef aio: make the lookup_ioctx() lockless bio: add support for inlining a number of bio_vecs inside the bio bio: allow individual slabs in the bio_set bio: move the slab pointer inside the bio_set bio: only mempool back the largest bio_vec slab cache block: don't use plugging on SSD devices ...
-
由 Linus Torvalds 提交于
Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, sparseirq: clean up Kconfig entry x86: turn CONFIG_SPARSE_IRQ off by default sparseirq: fix numa_migrate_irq_desc dependency and comments sparseirq: add kernel-doc notation for new member in irq_desc, -v2 locking, irq: enclose irq_desc_lock_class in CONFIG_LOCKDEP sparseirq, xen: make sure irq_desc is allocated for interrupts sparseirq: fix !SMP building, #2 x86, sparseirq: move irq_desc according to smp_affinity, v7 proc: enclose desc variable of show_stat() in CONFIG_SPARSE_IRQ sparse irqs: add irqnr.h to the user headers list sparse irqs: handle !GENIRQ platforms sparseirq: fix !SMP && !PCI_MSI && !HT_IRQ build sparseirq: fix Alpha build failure sparseirq: fix typo in !CONFIG_IO_APIC case x86, MSI: pass irq_cfg and irq_desc x86: MSI start irq numbering from nr_irqs_gsi x86: use NR_IRQS_LEGACY sparse irq_desc[] array: core kernel and x86 changes genirq: record IRQ_LEVEL in irq_desc[] irq.h: remove padding from irq_desc on 64bits
-
由 Linus Torvalds 提交于
Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: hrtimers: fix warning in kernel/hrtimer.c x86: make sure we really have an hpet mapping before using it x86: enable HPET on Fujitsu u9200 linux/timex.h: cleanup for userspace posix-timers: simplify de_thread()->exit_itimers() path posix-timers: check ->it_signal instead of ->it_pid to validate the timer posix-timers: use "struct pid*" instead of "struct task_struct*" nohz: suppress needless timer reprogramming clocksource, acpi_pm.c: put acpi_pm_read_slow() under CONFIG_PCI nohz: no softirq pending warnings for offline cpus hrtimer: removing all ur callback modes, fix hrtimer: removing all ur callback modes, fix hotplug hrtimer: removing all ur callback modes x86: correct link to HPET timer specification rtc-cmos: export second NVRAM bank Fixed up conflicts in sound/drivers/pcsp/pcsp.c and sound/core/hrtimer.c manually.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip由 Linus Torvalds 提交于
* 'core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (63 commits) stacktrace: provide save_stack_trace_tsk() weak alias rcu: provide RCU options on non-preempt architectures too printk: fix discarding message when recursion_bug futex: clean up futex_(un)lock_pi fault handling "Tree RCU": scalable classic RCU implementation futex: rename field in futex_q to clarify single waiter semantics x86/swiotlb: add default swiotlb_arch_range_needs_mapping x86/swiotlb: add default phys<->bus conversion x86: unify pci iommu setup and allow swiotlb to compile for 32 bit x86: add swiotlb allocation functions swiotlb: consolidate swiotlb info message printing swiotlb: support bouncing of HighMem pages swiotlb: factor out copy to/from device swiotlb: add arch hook to force mapping swiotlb: allow architectures to override phys<->bus<->phys conversions swiotlb: add comment where we handle the overflow of a dma mask on 32 bit rcu: fix rcutorture behavior during reboot resources: skip sanity check of busy resources swiotlb: move some definitions to header swiotlb: allow architectures to override swiotlb pool allocation ... Fix up trivial conflicts in arch/x86/kernel/Makefile arch/x86/mm/init_32.c include/linux/hardirq.h as per Ingo's suggestions.
-
由 Roland Dreier 提交于
-
由 Roland Dreier 提交于
Commit f780a9f1 ("mlx4_core: Add ethernet fields to CQE struct") introduced a bug in how wc->sl is set in mlx4_ib_poll_one() -- since cqe->sl_vid is a big-endian value, the shift must be done after converting to host endianness. This bug was found using sparse endianness checking. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Trond Myklebust 提交于
-
由 WANG Cong 提交于
nfs4_map_errors() can become static. Signed-off-by: NWANG Cong <wangcong@zeuux.org> Cc: J. Bruce Fields <bfields@fieldses.org> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 James Bottomley 提交于
fcoe selects libfc and requires SCSI and PCI (the SCSI requirement is implicitly covered by an enclosing if). Fix them both up so they cannot be configured in an invalid state: make LIBFC select SCSI_FC_ATTRS and make FCOE depend on PCI and select LIBFC. Reported-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Robert Love <robert.w.love@intel.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Bottomley 提交于
cxgb3i requires the cxgb3 net driver, so it selects it. However, cxgb3 has dependencies which the select cannot see. Fix this by separating out the cxgb3 dependencies into a separate hidden config option (CONFIG_CHELSIO_T3_DEPENDS) and make both cxgb3 and cxgb3i depend on it. Reported-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Karen Xie <kxie@chelsio.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Bottomley 提交于
This structure may not be defined if CONFIG_MODULE=n, so never deref it. Change uses of module->name to module_name(module) and corrects some dyslexic printks and docbook comments. Reported-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Robert Love <robert.w.love@intel.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Karen Xie 提交于
The cxgb3i was using skb->sp pointer for some internal book-keeping which is not related to the secure path. Changed it to use skb->cb[] instead. Reported-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NKaren Xie <kxie@chelsio.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Karen Xie 提交于
This patch implements the cxgb3i iscsi connection acceleration for the open-iscsi initiator. The cxgb3i driver offers the iscsi PDU based offload: - digest insertion and verification - payload direct-placement into host memory buffer. Signed-off-by: NKaren Xie <kxie@chelsio.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 30 12月, 2008 8 次提交
-
-
由 Julia Lawall 提交于
This set of patches introduces calls to the following set of functions: usb_endpoint_dir_in(epd) usb_endpoint_dir_out(epd) usb_endpoint_is_bulk_in(epd) usb_endpoint_is_bulk_out(epd) usb_endpoint_is_int_in(epd) usb_endpoint_is_int_out(epd) usb_endpoint_is_isoc_in(epd) usb_endpoint_is_isoc_out(epd) usb_endpoint_num(epd) usb_endpoint_type(epd) usb_endpoint_xfer_bulk(epd) usb_endpoint_xfer_control(epd) usb_endpoint_xfer_int(epd) usb_endpoint_xfer_isoc(epd) In some cases, introducing one of these functions is not possible, and it just replaces an explicit integer value by one of the following constants: USB_ENDPOINT_XFER_BULK USB_ENDPOINT_XFER_CONTROL USB_ENDPOINT_XFER_INT USB_ENDPOINT_XFER_ISOC An extract of the semantic patch that makes these changes is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r1@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) == - \(USB_ENDPOINT_XFER_CONTROL\|0\)) + usb_endpoint_xfer_control(epd) @r5@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) == - \(USB_DIR_IN\|0x80\)) + usb_endpoint_dir_in(epd) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Steven Rostedt 提交于
Impact: clean up RW_LOCK_UNLOCKED is deprecated. This patch replaces it with the __RW_LOCK_UNLOCKED(lock) macro. This change was a little trickier than others due to the macro being used in another macro that fills an array. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Németh Márton 提交于
Modify Documentation/video4linux/API.html to be a valid XHTML 1.0 Strict. The result was verified using the http://validator.w3.org/ service. Signed-off-by: NMárton Németh <nm127@freemail.hu> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Erik Andrén 提交于
As pointed by gcc: drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c: In function ‘hdcs_set_size’: drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c:301: warning: ‘y’ may be used uninitialized in this function Signed-off-by: NErik Andrén <erik.andren@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
The current code was trying to query the AC97 registers for the vendor information even if it was clearly not a AC97 audio device (resulting in errors in the dmesg output). This was due to a bug in the way we did the check. Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
Add additional output formats, which will be useful for the Pinnacle PCTV Ultimate 880e integration with the saa7136. Thanks to Ray Lu from Empia for providing the em2860/em2880 datasheet. Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
Noticed when doing the audio support for the Pinnacle PCTV HD Ultimate 808e that the modes were incorrect (the 808e uses I2S in 5 sample mode) Thanks for Ray Lu from Empia for providing the em2860/em2880 datasheet. Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
Like the em2874, the em2870 does not have any analog support, so don't bother loading the em28xx-alsa module. Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-