The raid5 stripe cache was recently changed from fixed size (NR_STRIPES) to
variable size (conf->max_nr_stripes).  However there are two places that still
use the constant and as a result, reducing the size of the stripe cache can
result in a deadlock.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Who would submit code with a FIXME like that in it !!!!
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

CONFIG_MAX_RAW_DEVS should appear immediately after CONFIG_RAW_DRIVER.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This has been broken for months.  On resume, we call acpi_pci_link_set()
with interrupts off, so we get a warning when we try to do a kmalloc of non
atomic memory.  The actual allocation is just 2 long's (plus extra byte for
some reason I can't fathom), so a simple conversion to GFP_ATOMIC is
probably the safest way to fix this.

The error looks like this..

Debug: sleeping function called from invalid context at mm/slab.c:2486
in_atomic():0, irqs_disabled():1
 [<c0143f6c>] kmem_cache_alloc+0x40/0x56
 [<c0206a2e>] acpi_pci_link_set+0x3f/0x17f
 [<c0206f96>] irqrouter_resume+0x1e/0x3c
 [<c0239bca>] __sysdev_resume+0x11/0x6b
 [<c0239e88>] sysdev_resume+0x34/0x52
 [<c023de21>] device_power_up+0x5/0xa
Signed-off-by: NDave Jones <davej@redhat.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Hitting BUG_ON() in __alloc_bootmem_core() when there is no free page
available in the first node's memory.  For the case of kdump on PPC64
(Power 4 machine), the captured kernel is used two memory regions - memory
for TCE tables (tce-base and tce-size at top of RAM and reserved) and
captured kernel memory region (crashk_base and crashk_size).  Since we
reserve the memory for the first node, we should be returning from
__alloc_bootmem_core() to search for the next node (pg_dat).

Currently, find_next_zero_bit() is returning the n^th bit (eidx) when there
is no free page.  Then, test_bit() is failed since we set 0xff only for the
actual size initially (init_bootmem_core()) even though rounded up to one
page for bdata->node_bootmem_map.  We are hitting the BUG_ON after failing
to enter second "for" loop.
Signed-off-by: NHaren Myneni <haren@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I realized ZONE_DMA32 has a trivial bug at Kconfig for ia64.  In
include/linux/gfp.h on 2.6.15-rc5-mm1, CONFIG is define like followings.

#ifdef CONFIG_DMA_IS_DMA32
#define __GFP_DMA32	((__force gfp_t)0x01)	/* ZONE_DMA is ZONE_DMA32
*/
       :
       :

So, CONFIG_"ZONE"_DMA_IS_DMA32 is clearly wrong.
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The bd622663 commit broke the UCB1x00
touchscreen driver since the idev structure was assumed to be into the ts
structure, simply casting the former to the later in a couple places.

This patch fixes those, and also cache the idev pointer between multiple
calls to input_report_abs() to avoid growing the compiled code needlessly.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Cc: Dmitry Torokhov <dtor_core@ameritech.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Spotted by a Fedora user.  Compiling with DEBUG_PARPORT set fails due to
the broken cast.

Just remove it.
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When multiple probes are registered at the same address and if due to some
recursion (probe getting triggered within a probe handler), we skip calling
pre_handlers and just increment nmissed field.

The below patch make sure it walks the list for multiple probes case.
Without the below patch we get incorrect results of nmissed count for
multiple probe case.
Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

For Kprobes critical path is the path from debug break exception handler
till the control reaches kprobes exception code.  No probes can be
supported in this path as we will end up in recursion.

This patch prevents this by moving the below function to safe __kprobes
section onto which no probes can be inserted.
Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The IPMI specifcation says the generator ID is 0x20, but that is for bits
7-1.  Bit 0 is set to specify it is a software event.  The correct value is
0x41.  Without this fix, panic events written into the System Event Log
appear to come from an "unknown" generator, rather than from the kernel.
Signed-off-by: NJordan Hargrave <Jordan_Hargrave@dell.com>
Signed-off-by: NMatt Domsch <Matt_Domsch@dell.com>
Acked-by: NCorey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I2C ID renamed to I2C_DRIVERID_INFRARED
Acked-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Convert em28xx to use vm_insert_page instead of remap_pfn_range
Signed-off-by: NSascha Sommer <saschasommer@freenet.de>
Signed-off-by: NMichael Krufky <mkrufky@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- The Pinnacle PCTV Stereo needs tda9887 port2 set to 1

- Without this patch, mt20xx tuner is not detected and the board
  doesn't tune.
Signed-off-by: NRicardo Cerqueira <v4l@cerqueira.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Clean up whitespaces at v4l/dvb files
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Clean up whitespaces at v4l/dvb files
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Clean up whitespaces at v4l/dvb files
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Clean up whitespaces at v4l/dvb files
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Page count should be initialized to 1 on each of the MIPS empty zero pages,
to avoid a bad_page warning whenever one of them is freed from all mappings.
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

kauditd was causing suspends to fail because it refused to freeze.  Adding
a try_to_freeze() to its sleep loop solves the issue.
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
Acked-by: NPavel Machek <pavel@suse.cz>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

arch/um/kernel/tt/uaccess.c: In function `copy_from_user_tt':
arch/um/kernel/tt/uaccess.c:11: error: `FIXADDR_USER_START' undeclared (first use in this function)
arch/um/kernel/tt/uaccess.c:11: error: (Each undeclared identifier is reported only once
arch/um/kernel/tt/uaccess.c:11: error: for each function it appears in.)

I get the compile error when I disable CONFIG_MODE_SKAS.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Acked-by: NPaolo Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The below patch lets userspace have more control over the inodes that
inotify will watch.  It introduces two new flags.

        IN_ONLYDIR -- only watch the inode if it is a directory.
        This is needed to avoid the race that can occur when we want to be
        sure that we are watching a directory.

        IN_DONT_FOLLOW -- don't follow a symlink.  In combination
        with IN_ONLYDIR we can make sure that we don't watch the target of
        symlinks.

The issues the flags fix came up when writing the gnome-vfs inotify
backend.  Default behaviour is unchanged.
Signed-off-by: NJohn McCutchan <ttb@tentacle.dhs.org>
Acked-by: NRobert Love <rml@novell.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This undoes the put_disk patch I sent in before.

If I had been paying attention I would have seen that we call put_disk
from free_hba during driver unload.  That's the only time we want to
call it.  If it's called from deregister disk we may remove the
controller (cNd0) unintentionally.
Signed-off-by: NMike Miller <mike.miller@hp.com>
Signed-off-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When registering multiple kprobes at the same address, we leave a small
window where the kprobe hlist will not contain a reference to the
registered kprobe, leading to potentially, a system crash if the breakpoint
is hit on another processor.

Patch below now automically relpace the old kprobe with the new
kprobe from the hash list.
Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Acked-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add list_replace_rcu: replace old entry by new one.
Signed-off-by: NPaul E. McKenney <paulmck@us.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This adds a timestamp field to the events sent via the process event
connector.  The timestamp allows listeners to accurately account the
duration(s) between a process' events and offers strong means with which
to determine the order of events with respect to a given task while also
avoiding the addition of per-task data.

This alters the size and layout of the event structure and hence would
break compatibility if process events connector as it stands in 2.6.15-rc2
were released as a mainline kernel.
Signed-off-by: NMatt Helsley <matthltc@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There are several functions that might seem appropriate for a timestamp:

get_cycles()
current_kernel_time()
do_gettimeofday()
<read jiffies/jiffies_64>

Each has problems with combinations of SMP-safety, low resolution, and
monotonicity. This patch adds a new function that returns a monotonic SMP-safe
timestamp with nanosecond resolution where available.

Changes:
	Split timestamp into separate patch
	Moved to kernel/time.c
	Renamed to getnstimestamp
	Fixed unintended-pointer-arithmetic bug
Signed-off-by: NMatt Helsley <matthltc@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Commit f549d6c1 introduced a generic
fallback for security xattrs, but appears to include a subtle bug.

Gentoo users with kernels with selinux compiled in, and coreutils compiled
with acl support, noticed that they could not copy files on tmpfs using
'cp'.

cp (compiled with acl support) copies the file, lists the extended
attributes on the old file, copies them all to the new file, and then
exits.  However the listxattr() calls were failing with this odd behaviour:

llistxattr("a.out", (nil), 0)           = 17
llistxattr("a.out", 0x7fffff8c6cb0, 17) = -1 ERANGE (Numerical result out of
range)

I believe this is a simple problem in the logic used to check the buffer
sizes; if the user sends a buffer the exact size of the data, then its ok
:)

This change solves the problem.
More info can be found at http://bugs.gentoo.org/113138Signed-off-by: NDaniel Drake <dsd@gentoo.org>
Acked-by: NJames Morris <jmorris@namei.org>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Accessing nohz_cpu_mask before incrementing rcp->cur is racy.  It can cause
tickless idle CPUs to be included in rsp->cpumask, which will extend
graceperiods unnecessarily.

Fix this race.  It has been tested using extensions to RCU torture module
that forces various CPUs to become idle.
Signed-off-by: NSrivatsa Vaddagiri <vatsa@in.ibm.com>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

While doing some test of RCU torture module, I hit a OOPS in rcu_do_batch,
which was trying to processes callback of a module that was just removed.
This is because we weren't waiting long enough for all callbacks to fire.
Signed-off-by: NSrivatsa Vaddagiri <vatsa@in.ibm.com>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Acked-by: N"Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This introduces a new interface - rcu_barrier() which waits until all
the RCUs queued until this call have been completed.

Reiser4 needs this, because we do more than just freeing memory object
in our RCU callback: we also remove it from the list hanging off
super-block.  This means, that before freeing reiser4-specific portion
of super-block (during umount) we have to wait until all pending RCU
callbacks are executed.

The only change of reiser4 made to the original patch, is exporting of
rcu_barrier().

Cc: Hans Reiser <reiser@namesys.com>
Cc: Vladimir V. Saveliev <vs@namesys.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Reported by Jacques de Mer and Daniel Drake <dsd@gentoo.org>.
Signed-off-by: NAndreas Gruenbacher <agruen@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Sam Ravnborg <sam@ravnborg.org> writes:

> Author: Uwe Zeisberger <zeisberg@informatik.uni-freiburg.de>
>
>     [PATCH] kbuild: make kernelrelease in unconfigured kernel prints an error
>
>     Do not include .config for target kernelrelease

This is wrong.  KERNELRELEASE depends on CONFIG_LOCALVERSION, thus you
need .config.
Signed-off-by: NAndreas Schwab <schwab@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

With CPU hotplug enabled, NMI watchdog stoped working.  It appears the
violation is the cpu_online check in nmi handler.  local ACPI based NMI
watchdog is initialized before we set CPU online for APs.  It's quite
possible a NMI is fired before we set CPU online, and that's what happens
here.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Acked-by: NZwane Mwaikambo <zwane@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When a Kprobes are inserted/removed on a modules, the modules must be ref
counted so as not to allow to unload while probes are registered on that
module.

Without this patch, the probed module is free to unload, and when the
probing module unregister the probe, the kpobes code while trying to
replace the original instruction might crash.
Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: NMao Bibo <bibo.mao@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

SetPageDirty() and ClearPageDirty() are low-level thing which filesystems
shouldn't be using.  They bypass dirty page accounting.

Cc: David Woodhouse <dwmw2@infradead.org>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The VM layer (for historical reasons) turns a read-only shared mmap into
a private-like mapping with the VM_MAYWRITE bit clear.  Thus checking
just VM_SHARED isn't actually sufficient.

So use a trivial helper function for the cases where we wanted to inquire
if a mapping was COW-like or not.

Moo!
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

With the previous commit, we can handle arbitrary shared re-mappings
even without this complexity, and since the only known private mappings
are for strange users of /dev/mem (which never create an incomplete one),
there seems to be no reason to support it.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>