- 06 11月, 2007 40 次提交
-
-
由 WANG Cong 提交于
Fix an incompatible-pointer warning. Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: NJeff Dike <jdike@linux.intel.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Roel Kluin 提交于
Fix 'and' typo (PT_WRITE_OK is defined 2) Signed-off-by: NRoel Kluin <12o3l@tiscali.nl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Adrian Bunk 提交于
This patch fixes an off-by-one error spotted by the Coverity checker. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Acked-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
A tiny vestige of arm26 has appeared: remove it again. (akpm: someone (tm) needs to remove include/asm-arm26/ too) Signed-off-by: NHugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
When a bitmap is empty bitmap_scnlistprintf() would leave the buffer uninitialized. Set it to an empty string in this case. I didn't see any in normal kernel callers hitting this, but some custom debug code of mine did. Signed-off-by: NAndi Kleen <ak@suse.de> Acked-by: NPaul Jackson <pj@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kamalesh Babulal 提交于
The Build with randconfig fails with following error with the 2.6.24-rc4-git9 include/linux/kallsyms.h:56: error: `NULL' undeclared (first use in this function) include/linux/kallsyms.h:56: error: (Each undeclared identifier is reported only once include/linux/kallsyms.h:56: error: for each function it appears in.) make[2]: *** [arch/powerpc/platforms/cell/spu_callbacks.o] Error 1 make[1]: *** [arch/powerpc/platforms/cell] Error 2 make: *** [arch/powerpc/platforms] Error 2 Signed-off-by: NKamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mathieu Desnoyers 提交于
Grant Grundler was asking for more detail about correct usage of local atomic operations and suggested adding the resulting summary to local_ops.txt. "Please add a bit more detail. If DaveM is correct (he normally is), then there must be limits on how the local_t can be used in the kernel process and interrupt contexts. I'd like those rules spelled out very clearly since it's easy to get wrong and tracking down such a bug is quite painful." Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: NGrant Grundler <grundler@parisc-linux.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yinghai Lu 提交于
drivers/serial/8250_early.c:80: warning: conflicting types for built-in function `putc' Signed-off-by: NYinghai Lu <yinghai.lu@sun.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vasily Averin 提交于
max_phys_segments and max_sectors were swapped Signed-off-by: NVasily Averin <vvs@sw.ru> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
Let's make immediately obvious from where sysctl comes from and messages itself more noticeable. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Roel Kluin 提交于
Signed-off-by: NRoel Kluin <12o3l@tiscali.nl> Acked-by: NKarsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.o-hand.com/linux-rpurdie-leds由 Linus Torvalds 提交于
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds: leds: bugfixes for leds-gpio
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: PCI: Add Kconfig option to disable deprecated pci_find_* API PCI: pciserial_resume_one ignored return value of pci_enable_device PCI Hotplug: cpqhp_pushbutton_thread(): remove a pointless if() check PCI: make pci_match_device() static PCI: Remove 3 incorrect MSI quirks. PCI: Add MSI INTX_DISABLE quirks for ATI SB700/800 SATA and IXP SB400 USB PCI: Add quirk for devices which disable MSI when INTX_DISABLE is set. PCI: Add MSI quirk for ServerWorks HT1000 PCIX bridge. PCI: Revert "PCI: disable MSI by default on systems with Serverworks HT1000 chips"
-
由 David Brownell 提交于
Three bugfixes to the leds-gpio driver, plus minor whitespace tweaks: - Do the INIT_WORK() before registering each LED, so if its trigger becomes immediately active it can schedule work without oopsing.. - Use normal registration, not platform_driver_probe(), so that devices appearing "late" (hotplug type) can still be bound. - Mark the driver remove code as "__devexit", preventing oopses when the underlying device is removed. These issues came up when using this driver with some GPIO expanders living on serial busses, which act unlike "normal" platform devices: they can appear and vanish along with the serial bus driver. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: fix IDE_HFLAG_NO_ATAPI_DMA handling in config_drive_for_dma() ide: move ide_fixstring() documentation to ide-iops.c from ide.h ide: add missing #ifdef/#endif CONFIG_IDE_TASK_IOCTL ide: fix ide_find_dma_mode() to print human-readable info ide: add missing rq.ref_count initialization to ide_diag_taskfile() ide: clear HOB bit for REQ_TYPE_ATA_TASK requests in ide_end_drive_cmd() ide: check rq->cmd_type in drive_cmd_intr() ide/Kconfig: fix BLK_DEV_OFFBOARD dependencies ide: unexport ide_fix_driveid ide/Kconfig: add IDEDISK_MULTI_MODE text adapted from hdparm manual page ide: do_identify() string termination fix piix: add support for ICH7 on Acer 5602aWLMi
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb由 Linus Torvalds 提交于
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (26 commits) V4L/DVB (6548): pvrusb2: Fix oops on module removal V4L/DVB (6547): V4L: remove PCI from VIDEO_VIVI depends V4L/DVB (6532): Add the remaining addresses for tda9887 V4L/DVB (6531): Fix a regression caused by commit 15396236 V4L/DVB (6518): Fix tvp5150 default values V4L/DVB (6514): em28xx: Include linux/mm.h V4L/DVB (6506): saa7134-alsa: Fix mmap support V4L/DVB (6504): pvrusb2: Remove dead sysfs code V4L/DVB (6503): pvrusb2: Fix associativity logic error V4L/DVB (6501): stv0297: Signal strength fixes V4L/DVB (6500): tda10021: Fix reported signal strength V4L/DVB (6499): tda10021: Bit error counting fixed V4L/DVB (6498): ves1820: Change the acquisition range for clock recovery from 120 ppm to 240ppm V4L/DVB (6495): saa7146: saa7146_wait_for_debi_done fixes V4L/DVB (6479): use input functions, should depend on INPUT V4L/DVB (6478): ir-functions use input functions, should depend on INPUT V4L/DVB (6432): tuner: fix CONFIG_TUNER_TEA5761=m V4L/DVB (6407): planb: fix obvious interrupt handling bugs V4L/DVB (6406): saa7134: fix analog audio in on medion md8800 quadro V4L/DVB (6403): mt2131: replace comma with semicolon fix ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/sam/fix-kbuild由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/fix-kbuild: kbuild: do not pick up CFLAGS from the environment
-
由 Jeff Garzik 提交于
Signed-off-by: NJeff Garzik <jgarzik@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Dirk Hohndel 提交于
[PATCH] pciserial_resume_one ignored return value of pci_enable_device Signed-off-by: NDirk Hohndel <hohndel@linux.intel.com> Acked-by: NAlan Cox <alan@redhat.com> Acked-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Adrian Bunk 提交于
The Coverity checker spotted that we'd have already oops'ed if "ctrl" was NULL. Additionally, "func" had just been checked for not being NULL. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Adrian Bunk 提交于
pci_match_device() no longer has any other users. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Miller 提交于
Now that we have dealt with the real issue, in that some ATI SATA and USB controllers needed the INTX_DISABLE quirk, we can remove these AMD chipset global MSI disabling quirks. This reverts three changesets: 4be8f906 (PCI: disable MSI on RS690) aea6a433 (PCI: disable MSI on RD580) f122392f (PCI: disable MSI on RX790) This is based upon testing and feedback from Shane Huang <Shane.Huang@amd.com>. Cc: Shane Huang <Shane.Huang@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NJeff Garzik <jgarzik@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NJeff Garzik <jgarzik@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Miller 提交于
A reasonably common problem with some devices is that they will disable MSI generation when the INTX_DISABLE bit is set in the PCI_COMMAND register. Quirk this explicitly, guarding the pci_intx() calls in msi.c with this quirk indication. The first entries for this quirk are for 5714 and 5780 Tigon3 chips, and thus we can remove the workaround code from the tg3.c driver. Signed-off-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NMichael Chan <mchan@broadcom.com> Acked-by: NJeff Garzik <jgarzik@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Miller 提交于
This is the fix for the following problem: https://bugzilla.redhat.com/show_bug.cgi?id=227657 The bnx2 device 5706 complains about MSI not working behind a ServerWorks HT1000 PCIX bridge. An earlier commit to fix the problem: e3008ded: "PCI: disable MSI by default on systems with Serverworks HT1000 chips" was not entirely correct, and has been reverted. MSI does not work on the PCIX bus because the BIOS did not set the HT_MSI_FLAGS_ENABLE bit in the HyperTransport MSI capability on the bridge. We use the existing quirk_msi_ht_cap() to detect the problem and disable MSI in all buses behind it. Signed-off-by: NMichael Chan <mchan@broadcom.com> Cc: Anantha Subramanyam <ananth@broadcom.com> Cc: Naren Sankar <nsankar@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NJeff Garzik <jgarzik@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Miller 提交于
This reverts commit e3008ded. The real bug was an INTX issue in the tg3 ethernet chip, and cured by commit c129d962a66c76964954a98b38586ada82cf9381 Signed-off-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NJeff Garzik <jgarzik@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
commit 33c1002e incorrectly changed return value from '0' to '-1', fix it (ns87415 was the only host driver affected since it uses both IDE_HFLAG_TRUST_BIOS_FOR_DMA and IDE_HFLAG_NO_ATAPI_DMA). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Problem reported by Mikael. Cc: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Noticed by Tejun Heo. Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
ide_dump_ata_status() may set HOB bit before ide_end_drive_cmd() is called. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
drive_cmd_intr() is used by both REQ_TYPE_ATA_CMD and REQ_TYPE_ATA_TASK but commands using PIO-in protocol are valid only for REQ_TYPE_ATA_CMD (&args[4] in case of REQ_TYPE_ATA_TASK points to a value for IDE_LCYL_REG register instead of the data buffer). This fix allows REQ_TYPE_ATA_TASK commands to use non-zero values for IDE_SECTOR_REG (args[3]). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
This config option is effective only for host drivers that use IDE_HFLAG_OFF_BOARD host flag (aec62xx, generic, hpt34x, hpt366, pdc202xx_new, pdc202xx_old and tc86c001). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Adrian Bunk 提交于
ide_fix_driveid can now be unexported. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Acked-by: NAlan Cox <alan@redhat.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Matti Linnanvuori 提交于
Add IDEDISK_MULTI_MODE text adapted from hdparm manual page. Signed-off-by: NMatti Linnanvuori <mattilinnanvuori@yahoo.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Tejun Heo 提交于
Terminates id->model string before invoking strstr() in do_identify(). Signed-off-by: NTejun Heo <tj@home-tj.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 sebdeg@ngi.it 提交于
In piix.c (and in ata_piix.c) are already included some patches to skip the cable check on some laptops and to enable UDMA > 33 modes, but I've noticed than theese doesn't work on my Acer Aspire 5602WLMi (maybe exist more versions of this laptop). With this simple patch I can set transfer mode to UDMA100. From: "sebdeg@ngi.it" <sebdeg@ngi.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Acked-by: NAlan Cox <alan@redhat.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
git://git390.osdl.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] tod clock: announce clocksource as perfect [S390] Rename "idle_time" attribute to "idle_time_us". [S390] Fix priority mistakes in drivers/s390/cio/cmf.c [S390] Fix memory detection. [S390] Fix compile on !CONFIG_SMP. [S390] device_schedule_callback() for dcssblk. [S390] Fix smsgiucv init on no iucv machines [S390] cio: use INIT_WORK to initialize struct work.
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest由 Linus Torvalds 提交于
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest: lguest: tidy up documentation kernel/futex.c: make 3 functions static unexport access_process_vm lguest: make async_hcall() static
-