- 16 12月, 2009 11 次提交
-
-
由 Wu Fengguang 提交于
The len test in write_kmem() is always true, so can be reduced. Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Acked-by: NAndi Kleen <ak@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Avi Kivity <avi@qumranet.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 KOSAKI Motohiro 提交于
On ia64, the following test program exit abnormally, because glibc thread library called abort(). ======================================================== (gdb) bt #0 0xa000000000010620 in __kernel_syscall_via_break () #1 0x20000000003208e0 in raise () from /lib/libc.so.6.1 #2 0x2000000000324090 in abort () from /lib/libc.so.6.1 #3 0x200000000027c3e0 in __deallocate_stack () from /lib/libpthread.so.0 #4 0x200000000027f7c0 in start_thread () from /lib/libpthread.so.0 #5 0x200000000047ef60 in __clone2 () from /lib/libc.so.6.1 ======================================================== The fact is, glibc call munmap() when thread exitng time for freeing stack, and it assume munlock() never fail. However, munmap() often make vma splitting and it with many mapcount make -ENOMEM. Oh well, that's crazy, because stack unmapping never increase mapcount. The maxcount exceeding is only temporary. internal temporary exceeding shouldn't make ENOMEM. This patch does it. test_max_mapcount.c ================================================================== #include<stdio.h> #include<stdlib.h> #include<string.h> #include<pthread.h> #include<errno.h> #include<unistd.h> #define THREAD_NUM 30000 #define MAL_SIZE (8*1024*1024) void *wait_thread(void *args) { void *addr; addr = malloc(MAL_SIZE); sleep(10); return NULL; } void *wait_thread2(void *args) { sleep(60); return NULL; } int main(int argc, char *argv[]) { int i; pthread_t thread[THREAD_NUM], th; int ret, count = 0; pthread_attr_t attr; ret = pthread_attr_init(&attr); if(ret) { perror("pthread_attr_init"); } ret = pthread_attr_setdetachstate(&attr, PTHREAD_CREATE_DETACHED); if(ret) { perror("pthread_attr_setdetachstate"); } for (i = 0; i < THREAD_NUM; i++) { ret = pthread_create(&th, &attr, wait_thread, NULL); if(ret) { fprintf(stderr, "[%d] ", count); perror("pthread_create"); } else { printf("[%d] create OK.\n", count); } count++; ret = pthread_create(&thread[i], &attr, wait_thread2, NULL); if(ret) { fprintf(stderr, "[%d] ", count); perror("pthread_create"); } else { printf("[%d] create OK.\n", count); } count++; } sleep(3600); return 0; } ================================================================== [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: NHugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alex Chiang 提交于
On a system with large amount of memory (256GB), invoking page-types can take quite a long time, which is unreasonable considering the user only wants a description of the flags: # time ./page-types -d 0x10 0x0000000000000010 ____D_____________________________ dirty real 0m34.285s user 0m1.966s sys 0m32.313s This is because we still walk the entire address range. Exiting early seems like a reasonble solution: # time ./page-types -d 0x10 0x0000000000000010 ____D_____________________________ dirty real 0m0.007s user 0m0.001s sys 0m0.005s Signed-off-by: NAlex Chiang <achiang@hp.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Haicheng Li <haicheng.li@intel.com> Acked-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alex Chiang 提交于
Align the output when page-type -h is invoked. Signed-off-by: NAlex Chiang <achiang@hp.com> Acked-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alex Chiang 提交于
Teach page-types to describe page flags directly from the command line. Why is this useful? For instance, if you're using memory hotplug and see this in /var/log/messages: kernel: removing from LRU failed 3836dd0/1/1e00000000000010 It would be nice to decode those page flags without staring at the source. Example usage and output: # Documentation/vm/page-types -d 0x10 0x0000000000000010 ____D_____________________________ dirty # Documentation/vm/page-types -d anon 0x0000000000001000 ____________a_____________________ anonymous # Documentation/vm/page-types -d anon,0x10 0x0000000000001010 ____D_______a_____________________ dirty,anonymous [achiang@hp.com: documentation] Signed-off-by: NAlex Chiang <achiang@hp.com> Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Haicheng Li <haicheng.li@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Roel Kluin 提交于
If not signed, testing of the read() return value in this function will not work. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tommi Rantala 提交于
Signed-off-by: NTommi Rantala <tt.rantala@gmail.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Rientjes 提交于
The oom killer header, including information such as the allocation order and gfp mask, current's cpuset and memory controller, call trace, and VM state information is currently only shown when the oom killer has selected a task to kill. This information is omitted, however, when the oom killer panics either because of panic_on_oom sysctl settings or when no killable task was found. It is still relevant to know crucial pieces of information such as the allocation order and VM state when diagnosing such issues, especially at boot. This patch displays the oom killer header whenever it panics so that bug reports can include pertinent information to debug the issue, if possible. Signed-off-by: NDavid Rientjes <rientjes@google.com> Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Marek 提交于
Sam was fine with handing over kbuild maintainership to me. The git trees are already in linux-next, a merge request will follow shortly. Acked-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NMichal Marek <mmarek@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Amerigo Wang 提交于
A specially-crafted Hierarchical File System (HFS) filesystem could cause a buffer overflow to occur in a process's kernel stack during a memcpy() call within the hfs_bnode_read() function (at fs/hfs/bnode.c:24). The attacker can provide the source buffer and length, and the destination buffer is a local variable of a fixed length. This local variable (passed as "&entry" from fs/hfs/dir.c:112 and allocated on line 60) is stored in the stack frame of hfs_bnode_read()'s caller, which is hfs_readdir(). Because the hfs_readdir() function executes upon any attempt to read a directory on the filesystem, it gets called whenever a user attempts to inspect any filesystem contents. [amwang@redhat.com: modify this patch and fix coding style problems] Signed-off-by: NWANG Cong <amwang@redhat.com> Cc: Eugene Teo <eteo@redhat.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Dave Anderson <anderson@redhat.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
commit d8e180dc "bsdacct: switch credentials for writing to the accounting file" introduced credential switching during final acct data collecting. However, uid/gid pair continued to be collected from current which became credentials of who created acct file, not who exits. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14676Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Reported-by: NJuho K. Juopperi <jkj@kapsi.fi> Acked-by: NSerge Hallyn <serue@us.ibm.com> Acked-by: NDavid Howells <dhowells@redhat.com> Reviewed-by: NMichal Schmidt <mschmidt@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 12月, 2009 24 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging由 Linus Torvalds 提交于
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c-core: i2c bus should support PM entries in struct dev_pm_ops i2c: Get rid of I2C_CLIENT_MODULE_PARM i2c: Drop I2C_CLIENT_INSMOD_2 to 8 i2c: Drop I2C_CLIENT_INSMOD_1 i2c: Get rid of struct i2c_client_address_data i2c: Drop the kind parameter from detect callbacks
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6: udf: Avoid IO in udf_clear_inode udf: Try harder when looking for VAT inode udf: Fix compilation with UDFFS_DEBUG enabled
-
由 Jan Kara 提交于
It is not very good to do IO in udf_clear_inode. First, VFS does not really expect inode to become dirty there and thus we have to write it ourselves, second, memory reclaim gets blocked waiting for IO when it does not really expect it, third, the IO pattern (e.g. on umount) resulting from writes in udf_clear_inode is bad and it slows down writing a lot. The reason why UDF needed to do IO in udf_clear_inode is that UDF standard mandates extent length to exactly match inode size. But when we allocate extents to a file or directory, we don't really know what exactly the final file size will be and thus temporarily set it to block boundary and later truncate it to exact length in udf_clear_inode. Now, this is changed to truncate to final file size in udf_release_file for regular files. For directories and symlinks, we do the truncation at the moment when learn what the final file size will be. Signed-off-by: NJan Kara <jack@suse.cz>
-
由 Jan Kara 提交于
Some disks do not contain VAT inode in the last recorded block as required by the standard but a few blocks earlier (or the number of recorded blocks is wrong). So look for the VAT inode a bit before the end of the media. Signed-off-by: NJan Kara <jack@suse.cz>
-
由 Jan Kara 提交于
Signed-off-by: NJan Kara <jack@suse.cz>
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, mce: Clean up thermal init by introducing intel_thermal_supported() x86, mce: Thermal monitoring depends on APIC being enabled x86: Gart: fix breakage due to IOMMU initialization cleanup x86: Move swiotlb initialization before dma32_free_bootmem x86: Fix build warning in arch/x86/mm/mmio-mod.c x86: Remove usedac in feature-removal-schedule.txt x86: Fix duplicated UV BAU interrupt vector nvram: Fix write beyond end condition; prove to gcc copy is safe mm: Adjust do_pages_stat() so gcc can see copy_from_user() is safe x86: Limit the number of processor bootup messages x86: Remove enabling x2apic message for every CPU doc: Add documentation for bootloader_{type,version} x86, msr: Add support for non-contiguous cpumasks x86: Use find_e820() instead of hard coded trampoline address x86, AMD: Fix stale cpuid4_info shared_map data in shared_cpu_map cpumasks Trivial percpu-naming-introduced conflicts in arch/x86/kernel/cpu/intel_cacheinfo.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: CodingStyle fixes pcmcia: remove unused IRQ_FIRST_SHARED
-
由 sonic zhang 提交于
Struct dev_pm_ops is not configured in current i2c bus type. i2c drivers only depends on suspend/resume entries in struct dev_pm_ops are not informed of PM suspend and resume events by i2c framework. Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
There is no user left of I2C_CLIENT_MODULE_PARM, so we can finally get rid of this ugly macro. Signed-off-by: NJean Delvare <khali@linux-fr.org> Tested-by: NWolfram Sang <w.sang@pengutronix.de>
-
由 Jean Delvare 提交于
These macros simply declare an enum, so drivers might as well declare it themselves. This puts an end to the arbitrary limit of 8 chip types per i2c driver. Signed-off-by: NJean Delvare <khali@linux-fr.org> Tested-by: NWolfram Sang <w.sang@pengutronix.de>
-
由 Jean Delvare 提交于
This macro simply declares an enum, so drivers might as well declare it themselves. Signed-off-by: NJean Delvare <khali@linux-fr.org> Tested-by: NWolfram Sang <w.sang@pengutronix.de>
-
由 Jean Delvare 提交于
Struct i2c_client_address_data only contains one field at this point, which makes its usefulness questionable. Get rid of it and pass simple address lists around instead. Signed-off-by: NJean Delvare <khali@linux-fr.org> Tested-by: NWolfram Sang <w.sang@pengutronix.de>
-
由 Jean Delvare 提交于
The "kind" parameter always has value -1, and nobody is using it any longer, so we can remove it. Signed-off-by: NJean Delvare <khali@linux-fr.org> Tested-by: NWolfram Sang <w.sang@pengutronix.de>
-
git://git.secretlab.ca/git/linux-2.6由 Linus Torvalds 提交于
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: (23 commits) spi: fix probe/remove section markings Add OMAP spi100k driver spi-imx: don't access struct device directly but use dev_get_platdata spi-imx: Add mx25 support spi-imx: use positive logic to distinguish cpu variants spi-imx: correct check for platform_get_irq failing ARM: NUC900: Add spi driver support for nuc900 spi: SuperH MSIOF SPI Master driver V2 spi: fix spidev compilation failure when VERBOSE is defined spi/au1550_spi: fix setupxfer not to override cfg with zeros spi/mpc8xxx: don't use __exit_p to wrap plat_mpc8xxx_spi_remove spi/i.MX: fix broken error handling for gpio_request spi/i.mx: drain MXC SPI transfer buffer when probing device MAINTAINERS: add SPI co-maintainer. spi/xilinx_spi: fix incorrect casting spi/mpc52xx-spi: minor cleanups xilinx_spi: add a platform driver using the xilinx_spi common module. xilinx_spi: add support for the DS570 IP. xilinx_spi: Switch to iomem functions and support little endian. xilinx_spi: Split into of driver and generic part. ...
-
由 Linus Torvalds 提交于
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf sched: Fix build failure on sparc perf bench: Add "all" pseudo subsystem and "all" pseudo suite perf tools: Introduce perf_session class perf symbols: Ditch dso->find_symbol perf symbols: Allow lookups by symbol name too perf symbols: Add missing "Variables" entry to map_type__name perf symbols: Add support for 'variable' symtabs perf symbols: Introduce ELF counterparts to symbol_type__is_a perf symbols: Introduce symbol_type__is_a perf symbols: Rename kthreads to kmaps, using another abstraction for it perf tools: Allow building for ARM hw-breakpoints: Handle bad modify_user_hw_breakpoint off-case return value perf tools: Allow cross compiling tracing, slab: Fix no callsite ifndef CONFIG_KMEMTRACE tracing, slab: Define kmem_cache_alloc_notrace ifdef CONFIG_TRACING Trivial conflict due to different fixes to modify_user_hw_breakpoint() in include/linux/hw_breakpoint.h
-
由 David Howells 提交于
Global variable declarations must match the definitions in section attributes as the compiler is at liberty to vary the method it uses to access a variable, depending on the section it is in. When building the FRV arch, I now see: drivers/built-in.o: In function `pci_apply_final_quirks': drivers/pci/quirks.c:2606: relocation truncated to fit: R_FRV_GPREL12 against symbol `pci_dfl_cache_line_size' defined in .devinit.data section in drivers/built-in.o drivers/pci/quirks.c:2623: relocation truncated to fit: R_FRV_GPREL12 against symbol `pci_dfl_cache_line_size' defined in .devinit.data section in drivers/built-in.o drivers/pci/quirks.c:2630: relocation truncated to fit: R_FRV_GPREL12 against symbol `pci_dfl_cache_line_size' defined in .devinit.data section in drivers/built-in.o because the declaration of pci_dfl_cache_line_size in linux/pci.h does not match the definition in drivers/pci/pci.c. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
If there is no hardware breakpoint support, modify_user_hw_breakpoint() tries to return a NULL pointer through as an 'int' return value: In file included from kernel/exit.c:53: include/linux/hw_breakpoint.h: In function 'modify_user_hw_breakpoint': include/linux/hw_breakpoint.h:96: warning: return makes integer from pointer without a cast Return 0 instead. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.monstr.eu/linux-2.6-microblaze由 Linus Torvalds 提交于
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (46 commits) microblaze: Remove rt_sigsuspend wrapper microblaze: nommu: Don't clobber R11 on syscalls microblaze: Remove show_tmem function microblaze: Support for WB cache microblaze: Add PVR for Microblaze v7.30.a microblaze: Remove ancient and fake microblaze version from cpu_ver table microblaze: Remove panic_timeout init value microblaze: Do not count system calls in default microblaze: Enable DTC compilation microblaze: Core oprofile configs and hooks microblaze: Fix level interrupt ACKing microblaze: Enable futimesat syscall microblaze: Checking DTS against PVR for write-back cache microblaze: Remove duplicity from pgalloc.h microblaze: Futex support microblaze: Adding dev_arch_data functions microblaze: Fix the heartbeat gpio to be more robust microblaze: Simple __copy_tofrom_user for noMMU microblaze: Export memory_start for modules microblaze: Use lowest-common-denominator default CPU settings ...
-
git://neil.brown.name/md由 Linus Torvalds 提交于
* 'for-linus' of git://neil.brown.name/md: (27 commits) md: add 'recovery_start' per-device sysfs attribute md: rcu_read_lock() walk of mddev->disks in md_do_sync() md: integrate spares into array at earliest opportunity. md: move compat_ioctl handling into md.c md: revise Kconfig help for MD_MULTIPATH md: add MODULE_DESCRIPTION for all md related modules. raid: improve MD/raid10 handling of correctable read errors. md/raid10: print more useful messages on device failure. md/bitmap: update dirty flag when bitmap bits are explicitly set. md: Support write-intent bitmaps with externally managed metadata. md/bitmap: move setting of daemon_lastrun out of bitmap_read_sb md: support updating bitmap parameters via sysfs. md: factor out parsing of fixed-point numbers md: support bitmap offset appropriate for external-metadata arrays. md: remove needless setting of thread->timeout in raid10_quiesce md: change daemon_sleep to be in 'jiffies' rather than 'seconds'. md: move offset, daemon_sleep and chunksize out of bitmap structure md: collect bitmap-specific fields into one structure. md/raid1: add takeover support for raid5->raid1 md: add honouring of suspend_{lo,hi} to raid1. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6由 Linus Torvalds 提交于
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (58 commits) mfd: Add twl6030 regulator subdevices regulator: Add support for twl6030 regulators rtc: Add twl6030 RTC support mfd: Add support for twl6030 irq framework mfd: Rename twl4030_ routines in twl-regulator.c mfd: Rename twl4030_ routines in rtc-twl.c mfd: Rename all twl4030_i2c* mfd: Rename twl4030* driver files to enable re-use mfd: Clarify twl4030 return value for read and write mfd: Add all twl4030 regulators to the twl4030 mfd driver mfd: Don't set mc13783 ADREFMODE for touch conversions mfd: Remove ezx-pcap defines for custom led gpio encoding mfd: Near complete mc13783 rewrite mfd: Remove build time warning for WM835x register default tables mfd: Force I2C to be built in when building WM831x mfd: Don't allow wm831x to be built as a module mfd: Fix incorrect error check for wm8350-core mfd: Fix twl4030 warning gpiolib: Implement gpio_to_irq() for wm831x mfd: Remove default selection of AB4500 ...
-
由 Linus Torvalds 提交于
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: fix lh7a40x build ARM: fix sa1100 build ARM: fix clps711x, footbridge, integrator, ixp2000, ixp2300 and s3c build bug ARM: VFP: fix vfp thread init bug and document vfp notifier entry conditions ARM: pxa: fix now incorrect reference of skt->irq by using skt->socket.pci_irq [ARM] pxa/zeus: default configuration for Arcom Zeus SBC. [ARM] pxa/zeus: make Viper pcmcia support more generic to support Zeus [ARM] pxa/zeus: basic support for Arcom Zeus SBC [ARM] pxa/em-x270: fix usb hub power up/reset sequence PCMCIA: fix pxa2xx_lubbock modular build error ARM: RealView: Fix typo in the RealView/PBX Kconfig entry ARM: Do not allow the probing of the local timer ARM: Add an earlyprintk debug console
-
git://git.linux-nfs.org/projects/trondmy/nfs-2.6由 Linus Torvalds 提交于
* git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (75 commits) NFS: Fix nfs_migrate_page() rpc: remove unneeded function parameter in gss_add_msg() nfs41: Invoke RECLAIM_COMPLETE on all new client ids SUNRPC: IS_ERR/PTR_ERR confusion NFSv41: Fix a potential state leakage when restarting nfs4_close_prepare nfs41: Handle NFSv4.1 session errors in the delegation recall code nfs41: Retry delegation return if it failed with session error nfs41: Handle session errors during delegation return nfs41: Mark stateids in need of reclaim if state manager gets stale clientid NFS: Fix up the declaration of nfs4_restart_rpc when NFSv4 not configured nfs41: Don't clear DRAINING flag on NFS4ERR_STALE_CLIENTID nfs41: nfs41_setup_state_renewal NFSv41: More cleanups NFSv41: Fix up some bugs in the NFS4CLNT_SESSION_DRAINING code NFSv41: Clean up slot table management NFSv41: Fix nfs4_proc_create_session nfs41: Invoke RECLAIM_COMPLETE nfs41: RECLAIM_COMPLETE functionality nfs41: RECLAIM_COMPLETE XDR functionality Cleanup some NFSv4 XDR decode comments ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (34 commits) m68k: rename global variable vmalloc_end to m68k_vmalloc_end percpu: add missing per_cpu_ptr_to_phys() definition for UP percpu: Fix kdump failure if booted with percpu_alloc=page percpu: make misc percpu symbols unique percpu: make percpu symbols in ia64 unique percpu: make percpu symbols in powerpc unique percpu: make percpu symbols in x86 unique percpu: make percpu symbols in xen unique percpu: make percpu symbols in cpufreq unique percpu: make percpu symbols in oprofile unique percpu: make percpu symbols in tracer unique percpu: make percpu symbols under kernel/ and mm/ unique percpu: remove some sparse warnings percpu: make alloc_percpu() handle array types vmalloc: fix use of non-existent percpu variable in put_cpu_var() this_cpu: Use this_cpu_xx in trace_functions_graph.c this_cpu: Use this_cpu_xx for ftrace this_cpu: Use this_cpu_xx in nmi handling this_cpu: Use this_cpu operations in RCU this_cpu: Use this_cpu ops for VM statistics ... Fix up trivial (famous last words) global per-cpu naming conflicts in arch/x86/kvm/svm.c mm/slab.c
-
由 William Allen Simpson 提交于
In recent months, two different network projects erroneously strayed down the rw_lock path. Update the Documentation based upon comments by Eric Dumazet and Paul E. McKenney in those threads. Further updates await somebody else with more expertise. Changes: - Merged with extensive content by Stephen Hemminger. - Fix one of the comments by Linus Torvalds. Signed-off-by: William.Allen.Simpson@gmail.com Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 12月, 2009 5 次提交
-
-
由 Hidetoshi Seto 提交于
It looks better to have a common function. No change in functionality. Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> LKML-Reference: <4B25FDDC.407@jp.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Cc: Cyrill Gorcunov <gorcunov@openvz.org>
-
由 Cyrill Gorcunov 提交于
Add check if APIC is not disabled since thermal monitoring depends on it. As only apic gets disabled we should not try to install "thermal monitor" vector, print out that thermal monitoring is enabled and etc... Note that "Intel Correct Machine Check Interrupts" already has such a check. Also I decided to not add cpu_has_apic check into mcheck_intel_therm_init since even if it'll call apic_read on disabled apic -- it's safe here and allow us to save a few code bytes. Reported-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> LKML-Reference: <4B25FDC2.3020401@jp.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 David Miller 提交于
Here, tvec->tv_usec is "unsigned int" not "unsigned long". Since the type is different on every platform, it's probably best to just use long printf formats and cast. Signed-off-by: NDavid S. Miller <davem@davemloft.net> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091213.235622.53363059.davem@davemloft.net> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
This fixes the following breakage of the commit 75f1cdf1: - GART systems that don't AGP with broken BIOS and more than 4GB memory are forced to use swiotlb. They can allocate aperture by hand and use GART. - GART systems without GAP must disable GART on shutdown. - swiotlb usage is forced by the boot option, gart_iommu_hole_init() is not called, so we disable GART early_gart_iommu_check(). Signed-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> LKML-Reference: <1260759135-6450-3-git-send-email-fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 FUJITA Tomonori 提交于
The commit 75f1cdf1 introduced a bug that we initialize SWIOTLB right after dma32_free_bootmem so we wrongly steal memory area allocated for GART with broken BIOS earlier. This moves swiotlb initialization before dma32_free_bootmem(). Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: yinghai@kernel.org LKML-Reference: <1260759135-6450-2-git-send-email-fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-