- 11 12月, 2010 1 次提交
-
-
由 Li Zefan 提交于
We should drop dentry before deactivating the superblock, otherwise we can hit this bug: BUG: Dentry f349a690{i=100,n=/} still in use (1) [unmount of btrfs loop1] ... Steps to reproduce the bug: # mount /dev/loop1 /mnt # mkdir save # btrfs subvolume snapshot /mnt save/snap1 # umount /mnt # mount -o subvol=save/snap1 /dev/loop1 /mnt (crash) Reported-by: NMichael Niederle <mniederle@gmx.at> Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 28 11月, 2010 2 次提交
-
-
由 Josef Bacik 提交于
There is a problem with how we use sget, it searches through the list of supers attached to the fs_type looking for a super with the same fs_devices as what we're trying to mount. This depends on sb->s_fs_info being filled, but we don't fill that in until we get to btrfs_fill_super, so we could hit supers on the fs_type super list that have a null s_fs_info. In order to fix that we need to go ahead and setup a blank root with a blank fs_info to hold fs_devices, that way our test will work out right and then we can set s_fs_info in btrfs_set_super, and then open_ctree will simply use our pre-allocated root and fs_info when setting everything up. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Ian Kent 提交于
When mounting a btrfs file system btrfs_test_super() may attempt to use sb->s_fs_info, the btrfs root, of a super block that is going away and that has had the btrfs root set to NULL in its ->put_super(). But if the super block is going away it cannot be an existing super block so we can return false in this case. Signed-off-by: NIan Kent <raven@themaw.net> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 22 11月, 2010 1 次提交
-
-
由 Josef Bacik 提交于
When I added the clear_cache option I screwed up and took the break out of the space_cache case statement, so whenever you mount with space_cache you also get clear_cache, which does you no good if you say set space_cache in fstab so it always gets set. This patch adds the break back in properly. Signed-off-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 30 10月, 2010 3 次提交
-
-
由 Sage Weil 提交于
Add a mount option user_subvol_rm_allowed that allows users to delete a (potentially non-empty!) subvol when they would otherwise we allowed to do an rmdir(2). We duplicate the may_delete() checks from the core VFS code to implement identical security checks (minus the directory size check). We additionally require that the user has write+exec permission on the subvol root inode. Signed-off-by: NSage Weil <sage@newdream.net> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Andi Kleen 提交于
These are all the cases where a variable is set, but not read which are not bugs as far as I can see, but simply leftovers. Still needs more review. Found by gcc 4.6's new warnings Signed-off-by: NAndi Kleen <ak@linux.intel.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Julia Lawall 提交于
Use ERR_CAST(x) rather than ERR_PTR(PTR_ERR(x)). The former makes more clear what is the purpose of the operation, which otherwise looks like a no-op. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; T x; identifier f; @@ T f (...) { <+... - ERR_PTR(PTR_ERR(x)) + x ...+> } @@ expression x; @@ - ERR_PTR(PTR_ERR(x)) + ERR_CAST(x) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 29 10月, 2010 2 次提交
-
-
由 Josef Bacik 提交于
If something goes wrong with the free space cache we need a way to make sure it's not loaded on mount and that it's cleared for everybody. When you pass the clear_cache option it will make it so all block groups are setup to be cleared, which keeps them from being loaded and then they will be truncated when the transaction is committed. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com>
-
由 Josef Bacik 提交于
In order to save free space cache, we need an inode to hold the data, and we need a special item to point at the right inode for the right block group. So first, create a special item that will point to the right inode, and the number of extent entries we will have and the number of bitmaps we will have. We truncate and pre-allocate space everytime to make sure it's uptodate. This feature will be turned on as soon as you mount with -o space_cache, however it is safe to boot into old kernels, they will just generate the cache the old fashion way. When you boot back into a newer kernel we will notice that we modified and not the cache and automatically discard the cache. Signed-off-by: NJosef Bacik <josef@redhat.com>
-
- 23 10月, 2010 2 次提交
-
-
由 Josef Bacik 提交于
If we failed to find the root subvol id, or the subvol=<name>, we would deactivate the locked super and close the devices. The problem is at this point we have gotten the SB all setup, which includes setting super_operations, so when we'd deactiveate the super, we'd do a close_ctree() which closes the devices, so we'd end up closing the devices twice. So if you do something like this mount /dev/sda1 /mnt/test1 mount /dev/sda1 /mnt/test2 -o subvol=xxx umount /mnt/test1 it would blow up (if subvol xxx doesn't exist). This patch fixes that problem. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com>
-
由 Josef Bacik 提交于
The new ENOSPC stuff breaks out the raid types which breaks the way we were reporting df to the system. This fixes it back so that Available is the total space available to data and used is the actual bytes used by the filesystem. This means that Available is Total - data used - all of the metadata space. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com>
-
- 10 8月, 2010 1 次提交
-
-
由 Al Viro 提交于
NB: do we want btrfs_wait_ordered_range() on eviction of inodes with positive i_nlink on subvolume with zero root_refs? If not, btrfs_evict_inode() can be simplified by unconditionally bailing out in case of i_nlink > 0 in the very beginning... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 12 6月, 2010 2 次提交
-
-
由 Dan Carpenter 提交于
btrfs_iget() returns an ERR_PTR() on failure and not null. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Dan Carpenter 提交于
If btrfs_lookup_dir_item() fails, we should can just let the mount fail with an error. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 26 5月, 2010 1 次提交
-
-
由 Kay Sievers 提交于
This adds: alias: devname:<name> to some common kernel modules, which will allow the on-demand loading of the kernel module when the device node is accessed. Ideally all these modules would be compiled-in, but distros seems too much in love with their modularization that we need to cover the common cases with this new facility. It will allow us to remove a bunch of pretty useless init scripts and modprobes from init scripts. The static device node aliases will be carried in the module itself. The program depmod will extract this information to a file in the module directory: $ cat /lib/modules/2.6.34-00650-g537b60d1-dirty/modules.devname # Device nodes to trigger on-demand module loading. microcode cpu/microcode c10:184 fuse fuse c10:229 ppp_generic ppp c108:0 tun net/tun c10:200 dm_mod mapper/control c10:235 Udev will pick up the depmod created file on startup and create all the static device nodes which the kernel modules specify, so that these modules get automatically loaded when the device node is accessed: $ /sbin/udevd --debug ... static_dev_create_from_modules: mknod '/dev/cpu/microcode' c10:184 static_dev_create_from_modules: mknod '/dev/fuse' c10:229 static_dev_create_from_modules: mknod '/dev/ppp' c108:0 static_dev_create_from_modules: mknod '/dev/net/tun' c10:200 static_dev_create_from_modules: mknod '/dev/mapper/control' c10:235 udev_rules_apply_static_dev_perms: chmod '/dev/net/tun' 0666 udev_rules_apply_static_dev_perms: chmod '/dev/fuse' 0666 A few device nodes are switched to statically allocated numbers, to allow the static nodes to work. This might also useful for systems which still run a plain static /dev, which is completely unsafe to use with any dynamic minor numbers. Note: The devname aliases must be limited to the *common* and *single*instance* device nodes, like the misc devices, and never be used for conceptually limited systems like the loop devices, which should rather get fixed properly and get a control node for losetup to talk to, instead of creating a random number of device nodes in advance, regardless if they are ever used. This facility is to hide the mess distros are creating with too modualized kernels, and just to hide that these modules are not compiled-in, and not to paper-over broken concepts. Thanks! :) Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: David S. Miller <davem@davemloft.net> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Chris Mason <chris.mason@oracle.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Ian Kent <raven@themaw.net> Signed-Off-By: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 25 5月, 2010 3 次提交
-
-
由 Yan, Zheng 提交于
reserve metadata space for handling orphan inodes Signed-off-by: NYan Zheng <zheng.yan@oracle.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Yan, Zheng 提交于
Besides simplify the code, this change makes sure all metadata reservation for normal metadata operations are released after committing transaction. Changes since V1: Add code that check if unlink and rmdir will free space. Add ENOSPC handling for clone ioctl. Signed-off-by: NYan Zheng <zheng.yan@oracle.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Yan, Zheng 提交于
The size of reserved space is stored in space_info. If block groups of different raid types are linked to separate space_info, changing allocation profile will corrupt reserved space accounting. Signed-off-by: NYan Zheng <zheng.yan@oracle.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 31 3月, 2010 1 次提交
-
-
由 Josef Bacik 提交于
As Yan pointed out, theres not much reason for all this complicated math to account for file extents being split up into max_extent chunks, since they are likely to all end up in the same leaf anyway. Since there isn't much reason to use max_extent, just remove the option altogether so we have one less thing we need to test. Signed-off-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 15 3月, 2010 4 次提交
-
-
由 Akinobu Mita 提交于
Use memparse() instead of its own private implementation. Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: linux-btrfs@vger.kernel.org Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Josef Bacik 提交于
The way we report df usage is way confusing for everybody, including some other utilities (bacula for one). So this patch makes df a little bit more understandable. First we make used actually count the total amount of used space in all space info's. This will give us a real view of how much disk space is in use. Second, for blocks available, only count data space. This makes things like bacula work because it says 0 when you can no longer write anymore data to the disk. I think this is a nice compromise, since you will end up with something like the following [root@alpha ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup-lv_root 148G 30G 111G 21% / /dev/sda1 194M 116M 68M 64% /boot tmpfs 985M 12K 985M 1% /dev/shm /dev/mapper/VolGroup-LogVol02 145G 140G 0 100% /mnt/btrfs-test Compare this with btrfsctl -i output [root@alpha btrfs-progs-unstable]# ./btrfsctl -i /mnt/btrfs-test/ Metadata, DUP: total=4.62GB, used=2.46GB System, DUP: total=8.00MB, used=24.00KB Data: total=134.80GB, used=134.80GB Metadata: total=8.00MB, used=0.00 System: total=4.00MB, used=0.00 operation complete This way we show that there is no more data space to be used, but we have another 5GB of space left for metadata. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Josef Bacik 提交于
Since theres not a good way to make sure the user sees the original default root tree id, and not to mention it's 5 so is way different than any other volume, just make subvol=0 mount the original default root. This makes it a bit easier for users to handle in the long run. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Josef Bacik 提交于
This work is in preperation for being able to set a different root as the default mounting root. There is currently a problem with how we mount subvolumes. We cannot currently mount a subvolume of a subvolume, you can only mount subvolumes/snapshots of the default subvolume. So say you take a snapshot of the default subvolume and call it snap1, and then take a snapshot of snap1 and call it snap2, so now you have / /snap1 /snap1/snap2 as your available volumes. Currently you can only mount / and /snap1, you cannot mount /snap1/snap2. To fix this problem instead of passing subvolid=<name> you must pass in subvolid=<treeid>, where <treeid> is the tree id that gets spit out via the subvolume listing you get from the subvolume listing patches (btrfs filesystem list). This allows us to mount /, /snap1 and /snap1/snap2 as the root volume. In addition to the above, we also now read the default dir item in the tree root to get the root key that it points to. For now this just points at what has always been the default subvolme, but later on I plan to change it to point at whatever root you want to be the new default root, so you can just set the default mount and not have to mount with -o subvolid=<treeid>. I tested this out with the above scenario and it worked perfectly. Thanks, mount -o subvol operates inside the selected subvolid. For example: mount -o subvol=snap1,subvolid=256 /dev/xxx /mnt /mnt will have the snap1 directory for the subvolume with id 256. mount -o subvol=snap /dev/xxx /mnt /mnt will be the snap directory of whatever the default subvolume is. Signed-off-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 09 3月, 2010 1 次提交
-
-
由 Josef Bacik 提交于
We kstrdup the options string, but then strsep screws with the pointer, so when we kfree() it, we're not giving it the right pointer. Tested-by: NAndy Lutomirski <luto@mit.edu> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 29 1月, 2010 1 次提交
-
-
由 Chris Mason 提交于
The default btrfs mount -o compress mode will quickly back off compressing a file if it notices that compression does not reduce the size of the data being written. This can save considerable CPU because all future writes to the file go through uncompressed. But some files are both very large and have mixed data stored in them. In that case, we want to add the ability to always try compressing data before writing it. This commit adds mount -o compress-force. A later commit will add a new inode flag that does the same thing. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 18 12月, 2009 3 次提交
-
-
由 Matthew Wilcox 提交于
Christoph's patch e244a0ae doesn't display the discard option in /proc/mounts, leading to some confusion for me. Here's the missing bit. Signed-off-by: NMatthew Wilcox <willy@linux.intel.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Sage Weil 提交于
We shouldn't silently ignore unrecognized options. Signed-off-by: NSage Weil <sage@newdream.net> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Yan, Zheng 提交于
iput() can trigger new transactions if we are dropping the final reference, so calling it in btrfs_commit_transaction may end up deadlock. This patch adds delayed iput to avoid the issue. Signed-off-by: NYan Zheng <zheng.yan@oracle.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 14 10月, 2009 2 次提交
-
-
由 Christoph Hellwig 提交于
Enable discard by default is not a good idea given the the trim speed of SSD prototypes we've seen, and the carecteristics for many high-end arrays. Turn of discards by default and require the -o discard option to enable them on. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
The btrfs acl code was #ifdefing for a define that didn't exist. This correctly matches it to the values used by the Kconfig file. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 30 9月, 2009 1 次提交
-
-
由 Chris Ball 提交于
We currently set sb->s_flags |= MS_POSIXACL unconditionally, which is incorrect -- it tells the VFS that it shouldn't set umask because we will, yet we don't set it ourselves if we aren't using POSIX ACLs, so the umask ends up ignored. Signed-off-by: NChris Ball <cjb@laptop.org> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 22 9月, 2009 2 次提交
-
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yan, Zheng 提交于
This patch adds snapshot/subvolume destroy ioctl. A subvolume that isn't being used and doesn't contains links to other subvolumes can be destroyed. Signed-off-by: NYan Zheng <zheng.yan@oracle.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 13 7月, 2009 1 次提交
-
-
由 Alexey Dobriyan 提交于
* Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 12 6月, 2009 2 次提交
-
-
由 Christoph Hellwig 提交于
Make sure a superblock really is writeable by checking MS_RDONLY under s_umount. sync_filesystems needed some re-arragement for that, but all but one sync_filesystem caller had the correct locking already so that we could add that check there. cachefiles grew s_umount locking. I've also added a WARN_ON to sync_filesystem to assert this for future callers. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 11 6月, 2009 1 次提交
-
-
由 Chris Mason 提交于
It was printing nodatacsum, which was not the correct option name. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 10 6月, 2009 2 次提交
-
-
由 Chris Mason 提交于
During mount, btrfs will check the queue nonrot flag for all the devices found in the FS. If they are all non-rotating, SSD mode is enabled by default. If the FS was mounted with -o nossd, the non-rotating flag is ignored. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Some SSDs perform best when reusing block numbers often, while others perform much better when clustering strictly allocates big chunks of unused space. The default mount -o ssd will find rough groupings of blocks where there are a bunch of free blocks that might have some allocated blocks mixed in. mount -o ssd_spread will make sure there are no allocated blocks mixed in. It should perform better on lower end SSDs. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-