- 24 10月, 2010 40 次提交
-
-
由 Joerg Roedel 提交于
This patch adds code to initialize the Nested Nested Paging MMU context when the L1 guest executes a VMRUN instruction and has nested paging enabled in its VMCB. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch adds the helper functions which will be used in the mmu context for handling nested nested page faults. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
With Nested Paging emulation the NX state between the two MMU contexts may differ. To make sure that always the right fault error code is recorded this patch moves the NX state into struct kvm_mmu so that the code can distinguish between L1 and L2 NX state. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
Currently the KVM softmmu implementation can not shadow a 32 bit legacy or PAE page table with a long mode page table. This is a required feature for nested paging emulation because the nested page table must alway be in host format. So this patch implements the missing pieces to allow long mode page tables for page table types. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch factors out the direct-mapping paths of the mmu_alloc_roots function into a seperate function. This makes it a lot easier to avoid all the unnecessary checks done in the shadow path which may break when running direct. In fact, this patch already fixes a problem when running PAE guests on a PAE shadow page table. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This function is implemented to load the pdptr pointers of the currently running guest (l1 or l2 guest). Therefore it takes care about the current paging mode and can read pdptrs out of l2 guest physical memory. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This function need to be able to load the pdptrs from any mmu context currently in use. So change this function to take an kvm_mmu parameter to fit these needs. As a side effect this patch also moves the cached pdptrs from vcpu_arch into the kvm_mmu struct. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
KVM currently ignores fetch faults in the instruction emulator. With nested-npt we could have such faults. This patch adds the code to handle these. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch implements logic to make sure that either a page-fault/page-fault-vmexit or a nested-page-fault-vmexit is propagated back to the guest. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch introduces the init_kvm_nested_mmu() function which is used to re-initialize the nested mmu when the l2 guest changes its paging mode. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch introduces the kvm_read_guest_page_x86 function which reads from the physical memory of the guest. If the guest is running in guest-mode itself with nested paging enabled it will read from the guest's guest physical memory instead. The patch also changes changes the code to use this function where it is necessary. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch uses kvm_read_guest_page_tdp to make the walk_addr_generic functions suitable for two-level page table walking. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch adds a function which can read from the guests physical memory or from the guest's guest physical memory. This will be used in the two-dimensional page table walker. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch adds the functions to do a nested l2_gva to l1_gpa page table walk. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch introduces the walk_mmu pointer which points to the mmu-context currently used for gva_to_gpa translations. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch introduces a mmu-callback to translate gpa addresses in the walk_addr code. This is later used to translate l2_gpa addresses into l1_gpa addresses. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This is the first patch in the series towards a generic walk_addr implementation which could walk two-dimensional page tables in the end. In this first step the walk_addr function is renamed into walk_addr_generic which takes a mmu context as an additional parameter. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch introduces a struct with two new fields in vcpu_arch for x86: * fault.address * fault.error_code This will be used to correctly propagate page faults back into the guest when we could have either an ordinary page fault or a nested page fault. In the case of a nested page fault the fault-address is different from the original address that should be walked. So we need to keep track about the real fault-address. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch changes is_rsvd_bits_set() function prototype to take only a kvm_mmu context instead of a full vcpu. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
Some logic of the init_kvm_softmmu function is required to build the Nested Nested Paging context. So factor the required logic into a seperate function and export it. Also make the whole init path suitable for more than one mmu context. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch introduces an inject_page_fault function pointer into struct kvm_mmu which will be used to inject a page fault. This will be used later when Nested Nested Paging is implemented. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This function pointer in the MMU context is required to implement Nested Nested Paging. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch introduces a special set_tdp_cr3 function pointer in kvm_x86_ops which is only used for tpd enabled mmu contexts. This allows to remove some hacks from svm code. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This is necessary to implement Nested Nested Paging. As a side effect this allows some cleanups in the SVM nested paging code. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch changes the tdp_enabled flag from its global meaning to the mmu-context and renames it to direct_map there. This is necessary for Nested SVM with emulation of Nested Paging where we need an extra MMU context to shadow the Nested Nested Page Table. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
The walk_addr function checks for !is_long_mode in its 64 bit version. But what is meant here is a check for pae paging. Change the condition to really check for pae paging so that it also works with nested nested paging. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Jes Sorensen 提交于
Some operating systems store data about the host processor at the time of installation, and when booted on a more uptodate cpu tries to read MSR_EBC_FREQUENCY_ID. This has been found with XP. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Reviewed-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Jes Sorensen 提交于
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Roedel, Joerg 提交于
This patch changes the rip handling in the vmrun emulation path from using next_rip to the generic kvm register access functions. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Joerg Roedel 提交于
This patch implements restoring of the correct rip, rsp, and rax after the svm emulation in KVM injected a selective_cr0 write intercept into the guest hypervisor. The problem was that the vmexit is emulated in the instruction emulation which later commits the registers right after the write-cr0 instruction. So the l1 guest will continue to run with the l2 rip, rsp and rax resulting in unpredictable behavior. This patch is not the final word, it is just an easy patch to fix the issue. The real fix will be done when the instruction emulator is made aware of nested virtualization. Until this is done this patch fixes the issue and provides an easy way to fix this in -stable too. Cc: stable@kernel.org Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Joerg Roedel 提交于
This patch fixes 32 bit legacy paging with NPT enabled. The mmu_check_root call on the top-level of the loop causes root_gfn to take values (in the tdp_enabled path) which are outside of guest memory. So the mmu_check_root call fails at some point in the loop interation causing the guest to tiple-fault. This patch changes the mmu_check_root calls to the places where they are really necessary. As a side-effect it introduces a check for the root of a pae page table too. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Alexander Graf 提交于
We have to protect the include for linux/of.h by __KERNEL__ so it doesn't accidently get referenced outside. This patch fixes this and makes the tree compile again. Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
This documents how to detect additional features inside the magic page when a guest maps it. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
The e500_tlb.c file didn't compile for me due to the following error: arch/powerpc/kvm/e500_tlb.c: In function ‘kvmppc_e500_shadow_map’: arch/powerpc/kvm/e500_tlb.c:300: error: format ‘%lx’ expects type ‘long unsigned int’, but argument 2 has type ‘gfn_t’ So let's explicitly cast the argument to make printk happy. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Kyle Moffett 提交于
The kvmppc_e500_stlbe_invalidate() function was trying to pass too many parameters to trace_kvm_stlb_inval(). This appears to be a bad copy-paste from a call to trace_kvm_stlb_write(). Signed-off-by: NKyle Moffett <Kyle.D.Moffett@boeing.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
This adds some documentation for the KVM_INTERRUPT special cases that PowerPC now implements. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
BookE also wants to support level based interrupts, so let's implement all the necessary logic there. We need to trick a bit here because the irqprios are 1:1 assigned to architecture defined values. But since there is some space left there, we can just pick a random one and move it later on - it's internal anyways. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
Now that we have all the level interrupt magic in place, let's expose the capability to user space, so it can make use of it! Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
The current interrupt logic is just completely broken. We get a notification from user space, telling us that an interrupt is there. But then user space expects us that we just acknowledge an interrupt once we deliver it to the guest. This is not how real hardware works though. On real hardware, the interrupt controller pulls the external interrupt line until it gets notified that the interrupt was received. So in reality we have two events: pulling and letting go of the interrupt line. To maintain backwards compatibility, I added a new request for the pulling part. The letting go part was implemented earlier already. With this in place, we can now finally start guests that do not randomly stall and stop to work at random times. This patch implements above logic for Book3S. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
Before I incorrectly enabled napping also for BookE, which would result in needless dcache flushes. Since we only need to force enable napping on Book3s_64 because it doesn't go into MSR_POW otherwise, we can just #ifdef that code to this particular platform. Reported-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-