- 23 8月, 2008 40 次提交
-
-
由 David Kilroy 提交于
For WPA support we need to encode NONE, WEP and TKIP in the encoding parameter. In anticipation of this we need to change the usage away from the current boolean usage. Signed-off-by: NDavid Kilroy <kilroyd@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Kilroy 提交于
This provides more information than the standard Agere scan, including the WPA IE. Signed-off-by: NDavid Kilroy <kilroyd@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Kilroy 提交于
Just sprinkle the necessary structs around... Signed-off-by: NDavid Kilroy <kilroyd@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Kilroy 提交于
The tx control word has moved into the 802.11 header area on these firmwares. Signed-off-by: NDavid Kilroy <kilroyd@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Kilroy 提交于
Firmware download is enabled for Agere in orinoco_cs. Symbol firmware download has been moved out of spectrum_cs into orinoco_cs. Firmware download is not enabled for Intersil. Symbol based firmware is restricted to only download on spectrum_cs based cards. The firmware names are hardcoded for each firmware type. Signed-off-by: NDavid Kilroy <kilroyd@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Kilroy 提交于
Add programming initialisation and termination functions. Add checks to avoid overrunning the firmware image or PDA areas. Extra algorithm to program PDA values using defaults where necessary. Signed-off-by: NDavid Kilroy <kilroyd@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Kilroy 提交于
Ensure PDA read is terminated. Prevent invalid programming blocks from causing reads outside the firmware image Turn off aux stuff when finished. Option to program in limited block sizes (controlled by macro). Option to read PDA from EEPROM. Signed-off-by: NDavid Kilroy <kilroyd@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Kilroy 提交于
Move the functionality from spectrum_cs to hermes_dld in preparation for making it more generic and usable by other orinoco drivers. Signed-off-by: NDavid Kilroy <kilroyd@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Kilroy 提交于
The current synchronous execution function doesn't work for certain Hermes commands which clear the MAGIC number from SWSUPPORT0. These commands seem to be related to initialisation or programming, for example HERMES_CMD_INIT. Replicate hermes_docmd_wait for commands which clear the MAGIC number from SWSUPPORT0. This version accepts two extra arguments which are passed straight to the firmware. Functionality copied out of hermes_init. Signed-off-by: NDavid Kilroy <kilroyd@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Kilroy 提交于
Signed-off-by: NDavid Kilroy <kilroyd@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Kilroy 提交于
hermes_issue_cmd now takes two more parameters. Signed-off-by: NDavid Kilroy <kilroyd@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Kilroy 提交于
Report channel, beacon interval and capabilities. Use WEXT defines instead of magic numbers. State quality stats in dB. Also a few changes to keep line length less than 80. Signed-off-by: NDavid Kilroy <kilroyd@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Kilroy 提交于
Pass the ESSID to the card. This allows 'iwlist eth1 scan essid <essid>' to work, and will help with routers setup not to broadcast the ESSID. Signed-off-by: NDavid Kilroy <kilroyd@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ron Rindjunsky 提交于
This patch adds a direct probe request as first step in the association flow if data we have is not up to date. Motivation of this step is to make sure that the bss information we have is correct, since last scan could have been done a while ago, and beacons do not fully answer this need as there are potential differences between them and probe responses (e.g. WMM parameter element) Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
It's been a long time, but fullmac prism54 driver is still around... I think we should rename every prism54* in order to avoid some confusion about "what is actually what" in the future ;-). Thanks-to: Maxi <maxi@daemonizer.de> Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ron Rindjunsky 提交于
This patch fixes noticed problem in noisy environments of 50+ APs that scan fails to find the requested AP on first try, which leads to connection refusal. second scan has empirically proven to fix this problem in almost all cases. Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: NEsti Kummer <ester.kummer@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Add a module parameter to rt61 and rt73 to disable HW crypto. The option should only be checked when determining if the SUPPORT_HW_CRYPTO flag should be set or not. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
We can optimize lna calculation in IRQ context by calculating most of the value during the config() callback when most of the value is actually influenced. This will be required later by rt2800pci and rt2800usb as well, since they need the lna_gain value during config(). Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch move add STA_MLME to station mlme state defines. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bruno Randolf 提交于
set the short preamble flag in ieee80211_rx_status for frames received with a short preamble. drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: NBruno Randolf <br1@einfach.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Channel information which is read from EEPROM should be read into an array containing per-channel information. This removes the requirement of multiple arrays and makes the channel handling a bit cleaner and easier to expand. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
rt73usb supports hardware encryption. rt73usb supports up to 4 shared keys and up to 64 pairwise keys. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
rt61pci supports hardware encryption. rt61pci supports up to 4 shared keys and up to 64 pairwise keys. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Various rt2x00 devices support hardware encryption. Most of them require the IV/EIV to be generated by mac80211, but require it to be provided seperately instead of within the frame itself. This means that rt2x00lib should extract the data from the frame and place it in the frame descriptor. During RX the IV/EIV is provided in the descriptor by the hardware which means that it should be inserted into the frame by rt2x00lib. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch moves filtering statement from ieee80211_rx_bss_info which is called for both beacon and probe to ieee80211_rx_mgmt_probe_resp and save few cycles in beacon parsing. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jasper Bryant-Greene 提交于
This patch replaces net_device arguments to mac80211 internal functions with ieee80211_{local,sub_if_data} as appropriate. It also does the same for many 802.11s mesh functions, and changes the mesh path table to be indexed on sub_if_data rather than net_device. If the mesh part needs to be a separate patch let me know, but since mesh uses a lot of mac80211 functions which were being converted anyway, the changes go hand-in-hand somewhat. This patch probably does not convert all the functions which could be converted, but it is a large chunk and followup patches will be provided. Signed-off-by: NJasper Bryant-Greene <jasper@amiton.co.nz> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jasper Bryant-Greene 提交于
ETH_P_PAE belongs in if_ether.h with the other ETH_P_* definitions. This patch moves it there. Signed-off-by: NJasper Bryant-Greene <jasper@amiton.co.nz> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
While it is interesting to not add last-enum-markers because it allows gcc to warn us of switch() statements missing a valid state, we really should be handling memory corruption on a rfkill state with default clauses, anyway. So add RFKILL_STATE_MAX and use it where applicable. It makes for safer code in the long run. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
rfkill is not a small, mere detail in wireless support. Once it starts supporting rfkill and users start counting on that support, a wireless device is at risk of operating in dangerous conditions should rfkill support fail to properly activate. Therefore, add the required __must_check annotations on some key functions of the rfkill API, for which the wireless drivers absolutely MUST handle the failure mode safely in order to avoid a potentially dangerous situation where the wireless transmitter is left enabled when the user don't want it to. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: NIvo van Doorn <IvDoorn@gmail.com> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
Add a second set of global states, "rfkill_default_states", to track the state that will be used when the first rfkill class of a given type is registered, and also to save "undo" information when rfkill_epo is called. Add a new exported function, rfkill_set_default(), which can be used by platform drivers to restore radio state saved by the platform across reboots or shutdown. Also, fix rfkill_epo to properly update rfkill_states, but still preserve a copy of the state so that we can undo the effect of rfkill_epo later if we want to. Add rfkill_restore_states() to restore rfkill_states from the copy. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
Detect and abort with -EEXIST if rfkill_register is called twice on the same rfkill struct. And WARN_ON(it) for good measure. While at it, flag when we are adding the first switch of a type, we will need that information later. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: NIvo van Doorn <IvDoorn@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Harvey Harrison 提交于
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis Carlos Cobo 提交于
Signed-off-by: NLuis Carlos Cobo <luisca@cozybit.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis Carlos Cobo 提交于
The libertas thin firmware only supports usb devices, but the usb functions have been kept separate to ease future support for other devices. Signed-off-by: NLuis Carlos Cobo <luisca@cozybit.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis Carlos Cobo 提交于
Signed-off-by: NLuis Carlos Cobo <luisca@cozybit.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis Carlos Cobo 提交于
This patch contains most of the libertastf driver, just lacking command helper functions and usb specific functions. Currently, monitor, managed, ap and mesh interfaces are supported. Even though this driver supports the same hardware as the "libertas" driver, it uses a different (thin) firmware, that makes it suitable for a mac80211 driver. Signed-off-by: NLuis Carlos Cobo <luisca@cozybit.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis Carlos Cobo 提交于
Signed-off-by: NLuis Carlos Cobo <luisca@cozybit.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis Carlos Cobo 提交于
Originally by Johannes Berg. This patch adds support for devices that do not report their MAC address until the firmware is loaded. While the address is not known, a multicast on is used. Signed-off-by: NLuis Carlos Cobo <luisca@cozybit.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Harvey Harrison 提交于
All users are gone now. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-