1. 02 8月, 2011 10 次提交
  2. 28 7月, 2011 30 次提交
    • L
      Merge branch 'for-linus' of git://neil.brown.name/md · 6140333d
      Linus Torvalds 提交于
      * 'for-linus' of git://neil.brown.name/md: (75 commits)
        md/raid10: handle further errors during fix_read_error better.
        md/raid10: Handle read errors during recovery better.
        md/raid10: simplify read error handling during recovery.
        md/raid10: record bad blocks due to write errors during resync/recovery.
        md/raid10:  attempt to fix read errors during resync/check
        md/raid10:  Handle write errors by updating badblock log.
        md/raid10: clear bad-block record when write succeeds.
        md/raid10: avoid writing to known bad blocks on known bad drives.
        md/raid10 record bad blocks as needed during recovery.
        md/raid10: avoid reading known bad blocks during resync/recovery.
        md/raid10 - avoid reading from known bad blocks - part 3
        md/raid10: avoid reading from known bad blocks - part 2
        md/raid10: avoid reading from known bad blocks - part 1
        md/raid10: Split handle_read_error out from raid10d.
        md/raid10: simplify/reindent some loops.
        md/raid5: Clear bad blocks on successful write.
        md/raid5.  Don't write to known bad block on doubtful devices.
        md/raid5: write errors should be recorded as bad blocks if possible.
        md/raid5: use bad-block log to improve handling of uncorrectable read errors.
        md/raid5: avoid reading from known bad blocks.
        ...
      6140333d
    • L
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 · 6f56c218
      Linus Torvalds 提交于
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
        sound: oss: rename local change_bits to avoid powerpc bitsops.h definition
        ALSA: hda - Fix duplicated DAC assignments for Realtek
        ALSA: asihpi - off by one in asihpi_hpi_ioctl()
        ALSA: hda - Fix Oops with Realtek quirks with NULL adc_nids
        ALSA: asihpi - bug fix pa use before init.
        ALSA: hda - Add support for vref-out based mute LED control on IDT codecs
      6f56c218
    • L
      Merge branch 'for-linus' of... · 95b68865
      Linus Torvalds 提交于
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (54 commits)
        tpm_nsc: Fix bug when loading multiple TPM drivers
        tpm: Move tpm_tis_reenable_interrupts out of CONFIG_PNP block
        tpm: Fix compilation warning when CONFIG_PNP is not defined
        TOMOYO: Update kernel-doc.
        tpm: Fix a typo
        tpm_tis: Probing function for Intel iTPM bug
        tpm_tis: Fix the probing for interrupts
        tpm_tis: Delay ACPI S3 suspend while the TPM is busy
        tpm_tis: Re-enable interrupts upon (S3) resume
        tpm: Fix display of data in pubek sysfs entry
        tpm_tis: Add timeouts sysfs entry
        tpm: Adjust interface timeouts if they are too small
        tpm: Use interface timeouts returned from the TPM
        tpm_tis: Introduce durations sysfs entry
        tpm: Adjust the durations if they are too small
        tpm: Use durations returned from TPM
        TOMOYO: Enable conditional ACL.
        TOMOYO: Allow using argv[]/envp[] of execve() as conditions.
        TOMOYO: Allow using executable's realpath and symlink's target as conditions.
        TOMOYO: Allow using owner/group etc. of file objects as conditions.
        ...
      
      Fix up trivial conflict in security/tomoyo/realpath.c
      95b68865
    • N
      md/raid10: handle further errors during fix_read_error better. · 58c54fcc
      NeilBrown 提交于
      If we find more read/write errors we should record a bad block before
      failing the device.
      Signed-off-by: NNeilBrown <neilb@suse.de>
      58c54fcc
    • N
      md/raid10: Handle read errors during recovery better. · 5e570289
      NeilBrown 提交于
      Currently when we get a read error during recovery, we simply abort
      the recovery.
      
      Instead, repeat the read in page-sized blocks.
      On successful reads, write to the target.
      On read errors, record a bad block on the destination,
      and only if that fails do we abort the recovery.
      
      As we now retry reads we need to know where we read from.  This was in
      bi_sector but that can be changed during a read attempt.
      So store the correct from_addr and to_addr in the r10_bio for later
      access.
      
      
      Signed-off-by: NeilBrown<neilb@suse.de>
      5e570289
    • N
      md/raid10: simplify read error handling during recovery. · e684e41d
      NeilBrown 提交于
      If a read error is detected during recovery the code currently
      fails the read device.
      This isn't really necessary.  recovery_request_write will signal
      a write error to end_sync_write and it will record a write
      error on the destination device which will record a bad block
      there or kick it from the array.
      
      So just remove this call to do md_error.
      Signed-off-by: NNeilBrown <neilb@suse.de>
      e684e41d
    • N
      md/raid10: record bad blocks due to write errors during resync/recovery. · 1a0b7cd8
      NeilBrown 提交于
      If we get a write error during resync/recovery don't fail the device
      but instead record a bad block.  If that fails we can then fail the
      device.
      Signed-off-by: NNeilBrown <neilb@suse.de>
      1a0b7cd8
    • N
      md/raid10: attempt to fix read errors during resync/check · f84ee364
      NeilBrown 提交于
      We already attempt to fix read errors found during normal IO
      and a 'repair' process.
      It is best to try to repair them at any time they are found,
      so move a test so that during sync and check a read error will
      be corrected by over-writing with good data.
      
      If both (all) devices have known bad blocks in the sync section we
      won't try to fix even though the bad blocks might not overlap.  That
      should be considered later.
      
      Also if we hit a read error during recovery we don't try to fix it.
      It would only be possible to fix if there were at least three copies
      of data, which is not very common with RAID10.  But it should still
      be considered later.
      Signed-off-by: NNeilBrown <neilb@suse.de>
      f84ee364
    • N
      md/raid10: Handle write errors by updating badblock log. · bd870a16
      NeilBrown 提交于
      When we get a write error (in the data area, not in metadata),
      update the badblock log rather than failing the whole device.
      
      As the write may well be many blocks, we trying writing each
      block individually and only log the ones which fail.
      Signed-off-by: NNeilBrown <neilb@suse.de>
      bd870a16
    • N
      md/raid10: clear bad-block record when write succeeds. · 749c55e9
      NeilBrown 提交于
      If we succeed in writing to a block that was recorded as
      being bad, we clear the bad-block record.
      
      This requires some delayed handling as the bad-block-list update has
      to happen in process-context.
      Signed-off-by: NNeilBrown <neilb@suse.de>
      749c55e9
    • N
      md/raid10: avoid writing to known bad blocks on known bad drives. · d4432c23
      NeilBrown 提交于
      Writing to known bad blocks on drives that have seen a write error
      is asking for trouble.  So try to avoid these blocks.
      Signed-off-by: NNeilBrown <neilb@suse.de>
      d4432c23
    • N
      md/raid10 record bad blocks as needed during recovery. · e875ecea
      NeilBrown 提交于
      When recovering one or more devices, if all the good devices have
      bad blocks we should record a bad block on the device being rebuilt.
      
      If this fails, we need to abort the recovery.
      
      To ensure we don't think that we aborted later than we actually did,
      we need to move the check for MD_RECOVERY_INTR earlier in md_do_sync,
      in particular before mddev->curr_resync is updated.
      Signed-off-by: NNeilBrown <neilb@suse.de>
      e875ecea
    • N
      md/raid10: avoid reading known bad blocks during resync/recovery. · 40c356ce
      NeilBrown 提交于
      During resync/recovery limit the size of the request to avoid
      reading into a bad block that does not start at-or-before the current
      read address.
      
      Similarly if there is a bad block at this address, don't allow the
      current request to extend beyond the end of that bad block.
      
      Now that we don't ever read from known bad blocks, it is safe to allow
      devices with those blocks into the array.
      Signed-off-by: NNeilBrown <neilb@suse.de>
      40c356ce
    • N
      md/raid10 - avoid reading from known bad blocks - part 3 · 8dbed5ce
      NeilBrown 提交于
      When attempting to repair a read error, don't read from
      devices with a known bad block.
      
      As we are only reading PAGE_SIZE blocks, we don't try to
      narrow down to smaller regions in the hope that only part of this
      page is bad - it isn't worth the effort.
      Signed-off-by: NNeilBrown <neilb@suse.de>
      8dbed5ce
    • N
      md/raid10: avoid reading from known bad blocks - part 2 · 7399c31b
      NeilBrown 提交于
      When redirecting a read error to a different device, we must
      again avoid bad blocks and possibly split the request.
      
      Spin_lock typo fixed thanks to Dan Carpenter <error27@gmail.com>
      Signed-off-by: NNeilBrown <neilb@suse.de>
      7399c31b
    • N
      md/raid10: avoid reading from known bad blocks - part 1 · 856e08e2
      NeilBrown 提交于
      This patch just covers the basic read path:
       1/ read_balance needs to check for badblocks, and return not only
          the chosen slot, but also how many good blocks are available
          there.
       2/ read submission must be ready to issue multiple reads to
          different devices as different bad blocks on different devices
          could mean that a single large read cannot be served by any one
          device, but can still be served by the array.
          This requires keeping count of the number of outstanding requests
          per bio.  This count is stored in 'bi_phys_segments'
      
      On read error we currently just fail the request if another target
      cannot handle the whole request.  Next patch refines that a bit.
      Signed-off-by: NNeilBrown <neilb@suse.de>
      856e08e2
    • N
      md/raid10: Split handle_read_error out from raid10d. · 560f8e55
      NeilBrown 提交于
      raid10d() is too big and is about to get bigger, so split
      handle_read_error() out as a separate function.
      Signed-off-by: NNeilBrown <neilb@suse.de>
      560f8e55
    • N
      md/raid10: simplify/reindent some loops. · 1294b9c9
      NeilBrown 提交于
      When a loop ends with a large if, it can be neater to change the
      if to invert the condition and just 'continue'.
      Then the body of the if can be indented to a lower level.
      Signed-off-by: NNeilBrown <neilb@suse.de>
      1294b9c9
    • N
      md/raid5: Clear bad blocks on successful write. · b84db560
      NeilBrown 提交于
      On a successful write to a known bad block, flag the sh
      so that raid5d can remove the known bad block from the list.
      Signed-off-by: NNeilBrown <neilb@suse.de>
      b84db560
    • N
      md/raid5. Don't write to known bad block on doubtful devices. · 73e92e51
      NeilBrown 提交于
      If a device has seen write errors, don't write to any known
      bad blocks on that device.
      Signed-off-by: NNeilBrown <neilb@suse.de>
      73e92e51
    • N
      md/raid5: write errors should be recorded as bad blocks if possible. · bc2607f3
      NeilBrown 提交于
      When a write error is detected, don't mark the device as failed
      immediately but rather record the fact for handle_stripe to deal with.
      
      Handle_stripe then attempts to record a bad block.  Only if that fails
      does the device get marked as faulty.
      Signed-off-by: NNeilBrown <neilb@suse.de>
      bc2607f3
    • N
      md/raid5: use bad-block log to improve handling of uncorrectable read errors. · 7f0da59b
      NeilBrown 提交于
      If we get an uncorrectable read error - record a bad block rather than
      failing the device.
      And if these errors (which may be due to known bad blocks) cause
      recovery to be impossible, record a bad block on the recovering
      devices, or abort the recovery.
      
      As we might abort a recovery without failing a device we need to teach
      RAID5 about recovery_disabled handling.
      Signed-off-by: NNeilBrown <neilb@suse.de>
      7f0da59b
    • N
      md/raid5: avoid reading from known bad blocks. · 31c176ec
      NeilBrown 提交于
      There are two times that we might read in raid5:
      1/ when a read request fits within a chunk on a single
         working device.
         In this case, if there is any bad block in the range of
         the read, we simply fail the cache-bypass read and
         perform the read though the stripe cache.
      
      2/ when reading into the stripe cache.  In this case we
         mark as failed any device which has a bad block in that
         strip (1 page wide).
         Note that we will both avoid reading and avoid writing.
         This is correct (as we will never read from the block, there
         is no point writing), but not optimal (as writing could 'fix'
         the error) - that will be addressed later.
      
      If we have not seen any write errors on the device yet, we treat a bad
      block like a recent read error.  This will encourage an attempt to fix
      the read error which will either generate a write error, or will
      ensure good data is stored there.  We don't yet forget the bad block
      in that case.  That comes later.
      
      Now that we honour bad blocks when reading we can allow devices with
      bad blocks into the array.
      Signed-off-by: NNeilBrown <neilb@suse.de>
      31c176ec
    • N
      md/raid1: factor several functions out or raid1d() · 62096bce
      NeilBrown 提交于
      raid1d is too big with several deep branches.
      So separate them out into their own functions.
      Signed-off-by: NNeilBrown <neilb@suse.de>
      Reviewed-by: NNamhyung Kim <namhyung@gmail.com>
      62096bce
    • N
      md/raid1: improve handling of read failure during recovery. · 3a9f28a5
      NeilBrown 提交于
      If we cannot read a block from anywhere during recovery, there is
      now a better approach than just giving up.
      We can record a bad block on each device and keep going - being
      careful not to clear the bad block when a write succeeds as it might -
      it will be a write of incorrect data.
      
      We have now reached the state where - for raid1 - we only call
      md_error if md_set_badblocks has failed.
      Signed-off-by: NNeilBrown <neilb@suse.de>
      Reviewed-by: NNamhyung Kim <namhyung@gmail.com>
      3a9f28a5
    • N
      md/raid1: record badblocks found during resync etc. · d8f05d29
      NeilBrown 提交于
      If we find a bad block while writing as part of resync/recovery we
      need to report that back to raid1d which must record the bad block,
      or fail the device.
      
      Similarly when fixing a read error, a further error should just
      record a bad block if possible rather than failing the device.
      Signed-off-by: NNeilBrown <neilb@suse.de>
      Reviewed-by: NNamhyung Kim <namhyung@gmail.com>
      d8f05d29
    • N
      md/raid1: Handle write errors by updating badblock log. · cd5ff9a1
      NeilBrown 提交于
      When we get a write error (in the data area, not in metadata),
      update the badblock log rather than failing the whole device.
      
      As the write may well be many blocks, we trying writing each
      block individually and only log the ones which fail.
      Signed-off-by: NNeilBrown <neilb@suse.de>
      Reviewed-by: NNamhyung Kim <namhyung@gmail.com>
      cd5ff9a1
    • N
      md/raid1: store behind-write pages in bi_vecs. · 2ca68f5e
      NeilBrown 提交于
      When performing write-behind we allocate pages to store the data
      during write.
      Previously we just keep a list of pages.  Now we keep a list of
      bi_vec which includes offset and size.
      This means that the r1bio has complete information to create a new
      bio which will be needed for retrying after write errors.
      Signed-off-by: NNeilBrown <neilb@suse.de>
      Reviewed-by: NNamhyung Kim <namhyung@gmail.com>
      2ca68f5e
    • N
      md/raid1: clear bad-block record when write succeeds. · 4367af55
      NeilBrown 提交于
      If we succeed in writing to a block that was recorded as
      being bad, we clear the bad-block record.
      
      This requires some delayed handling as the bad-block-list update has
      to happen in process-context.
      Signed-off-by: NNeilBrown <neilb@suse.de>
      Reviewed-by: NNamhyung Kim <namhyung@gmail.com>
      4367af55
    • N
      md/raid1: avoid writing to known-bad blocks on known-bad drives. · 1f68f0c4
      NeilBrown 提交于
      If we have seen any write error on a drive, then don't write to
      any known-bad blocks on that drive.
      If necessary, we divide the write request up into pieces just
      like we do for reads, so each piece is either all written or
      all not written to any given drive.
      Signed-off-by: NNeilBrown <neilb@suse.de>
      Reviewed-by: NNamhyung Kim <namhyung@gmail.com>
      1f68f0c4