- 18 11月, 2010 2 次提交
-
-
由 Arnd Bergmann 提交于
The big kernel lock has been removed from all these files at some point, leaving only the #include. Remove this too as a cleanup. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Arnd Bergmann 提交于
The stradis driver is on its way out, but it should still be marked correctly as depending on the big kernel lock. It could easily be changed to not require it if someone decides to revive the driver and port it to v4l2 in the process. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Reported-by: NSedat Dilek <sedat.dilek@googlemail.com> Cc: Nathan Laredo <laredo@gnu.org> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 11月, 2010 12 次提交
-
-
由 Marcus Meissner 提交于
Making /proc/kallsyms readable only for root by default makes it slightly harder for attackers to write generic kernel exploits by removing one source of knowledge where things are in the kernel. This is the second submit, discussion happened on this on first submit and mostly concerned that this is just one hole of the sieve ... but one of the bigger ones. Changing the permissions of at least System.map and vmlinux is also required to fix the same set, but a packaging issue. Target of this starter patch and follow ups is removing any kind of kernel space address information leak from the kernel. [ Side note: the default of root-only reading is the "safe" value, and it's easy enough to then override at any time after boot. The /proc filesystem allows root to change the permissions with a regular chmod, so you can "revert" this at run-time by simply doing chmod og+r /proc/kallsyms as root if you really want regular users to see the kernel symbols. It does help some tools like "perf" figure them out without any setup, so it may well make sense in some situations. - Linus ] Signed-off-by: NMarcus Meissner <meissner@suse.de> Acked-by: NTejun Heo <tj@kernel.org> Acked-by: NEugene Teo <eugeneteo@kernel.org> Reviewed-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.linux-nfs.org/projects/trondmy/nfs-2.6由 Linus Torvalds 提交于
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: nfs: Ignore kmemleak false positive in nfs_readdir_make_qstr SUNRPC: Simplify rpc_alloc_iostats by removing pointless local variable nfs: trivial: remove unused nfs_wait_event macro NFS: readdir shouldn't read beyond the reply returned by the server NFS: Fix a couple of regressions in readdir. Revert "NFSv4: Fall back to ordinary lookup if nfs4_atomic_open() returns EISDIR" Regression: fix mounting NFS when NFSv3 support is not compiled NLM: Fix a regression in lockd
-
由 Linus Torvalds 提交于
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Fix cross-sched-class wakeup preemption sched: Fix runnable condition for stoptask sched: Use group weight, idle cpu metrics to fix imbalances during idle
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6由 Linus Torvalds 提交于
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM / PM QoS: Fix reversed min and max PM / OPP: Hide OPP configuration when SoCs do not provide an implementation PM: Allow devices to be removed during late suspend and early resume
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip由 Linus Torvalds 提交于
* 'futexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: futex: Address compiler warnings in exit_robust_list
-
由 Jeff Garzik 提交于
Move the mid-layer's ->queuecommand() invocation from being locked with the host lock to being unlocked to facilitate speeding up the critical path for drivers who don't need this lock taken anyway. The patch below presents a simple SCSI host lock push-down as an equivalent transformation. No locking or other behavior should change with this patch. All existing bugs and locking orders are preserved. Additionally, add one parameter to queuecommand, struct Scsi_Host * and remove one parameter from queuecommand, void (*done)(struct scsi_cmnd *) Scsi_Host* is a convenient pointer that most host drivers need anyway, and 'done' is redundant to struct scsi_cmnd->scsi_done. Minimal code disturbance was attempted with this change. Most drivers needed only two one-line modifications for their host lock push-down. Signed-off-by: NJeff Garzik <jgarzik@redhat.com> Acked-by: NJames Bottomley <James.Bottomley@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: fix offset check for sysfs mmapped files
-
git://git390.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] kprobes: Fix the return address of multiple kretprobes [S390] kprobes: disable interrupts throughout [S390] ftrace: build without frame pointers on s390 [S390] mm: add devmem_is_allowed() for STRICT_DEVMEM checking [S390] vmlogrdr: purge after recording is switched off [S390] cio: fix incorrect ccw_device_init_count [S390] tape: add medium state notifications [S390] fix get_user_pages_fast
-
由 Darrick J. Wong 提交于
I just loaded 2.6.37-rc2 on my machines, and I noticed that X no longer starts. Running an strace of the X server shows that it's doing this: open("/sys/bus/pci/devices/0000:07:00.0/resource0", O_RDWR) = 10 mmap(NULL, 16777216, PROT_READ|PROT_WRITE, MAP_SHARED, 10, 0) = -1 EINVAL (Invalid argument) This code seems to be asking for a shared read/write mapping of 16MB worth of BAR0 starting at file offset 0, and letting the kernel assign a starting address. Unfortunately, this -EINVAL causes X not to start. Looking into dmesg, there's a complaint like so: process "Xorg" tried to map 0x01000000 bytes at page 0x00000000 on 0000:07:00.0 BAR 0 (start 0x 96000000, size 0x 1000000) ...with the following code in pci_mmap_fits: pci_start = (mmap_api == PCI_MMAP_SYSFS) ? pci_resource_start(pdev, resno) >> PAGE_SHIFT : 0; if (start >= pci_start && start < pci_start + size && start + nr <= pci_start + size) It looks like the logic here is set up such that when the mmap call comes via sysfs, the check in pci_mmap_fits wants vma->vm_pgoff to be between the resource's start and end address, and the end of the vma to be no farther than the end. However, the sysfs PCI resource files always start at offset zero, which means that this test always fails for programs that mmap the sysfs files. Given the comment in the original commit 3b519e4e, I _think_ the old procfs files require that the file offset be equal to the resource's base address when mmapping. I think what we want here is for pci_start to be 0 when mmap_api == PCI_MMAP_PROCFS. The following patch makes that change, after which the Matrox and Mach64 X drivers work again. Acked-by: NMartin Wilck <martin.wilck@ts.fujitsu.com> Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Catalin Marinas 提交于
Strings allocated via kmemdup() in nfs_readdir_make_qstr() are referenced from the nfs_cache_array which is stored in a page cache page. Kmemleak does not scan such pages and it reports several false positives. This patch annotates the string->name pointer so that kmemleak does not consider it a real leak. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Cc: Bryan Schumaker <bjschuma@netapp.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Jesper Juhl 提交于
Hi, We can simplify net/sunrpc/stats.c::rpc_alloc_iostats() a bit by getting rid of the unneeded local variable 'new'. Please CC me on replies. Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Jeff Layton 提交于
Nothing uses this macro anymore. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 16 11月, 2010 26 次提交
-
-
由 Joe Perches 提交于
Sigh... Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NEric Paris <eparis@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Fix up the issue that array->eof_index needs to be able to be set even if array->size == 0. Ensure that we catch all important memory allocation error conditions and/or kmap() failures. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
This reverts commit 80e60639. This change requires further fixes to ensure that the open doesn't succeed if the lookup later results in a regular file being created. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Paulius Zaleckas 提交于
Trying to mount NFS (root partition in my case) fails if CONFIG_NFS_V3 is not selected. nfs_validate_mount_data() returns EPROTONOSUPPORT, because of this check: #ifndef CONFIG_NFS_V3 if (args->version == 3) goto out_v3_not_compiled; #endif /* !CONFIG_NFS_V3 */ and args->version was always initialized to 3. It was working in 2.6.36 Signed-off-by: NPaulius Zaleckas <paulius.zaleckas@gmail.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Nick Bowler reports: There are no unusual messages on the client... but I just logged into the server and I see lots of messages of the following form: nfsd: request from insecure port (192.168.8.199:35766)! nfsd: request from insecure port (192.168.8.199:35766)! nfsd: request from insecure port (192.168.8.199:35766)! nfsd: request from insecure port (192.168.8.199:35766)! nfsd: request from insecure port (192.168.8.199:35766)! Bisected to commit 92476850 (SUNRPC: Properly initialize sock_xprt.srcaddr in all cases) Apparently, removing the 'transport->srcaddr.ss_family = family' from xs_create_sock() triggers this due to nlmclnt_lookup_host() incorrectly initialising the srcaddr family to AF_UNSPEC. Reported-by: NNick Bowler <nbowler@elliptictech.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Eric Paris 提交于
The addition of CONFIG_SECURITY_DMESG_RESTRICT resulted in a build failure when CONFIG_PRINTK=n. This is because the capabilities code which used the new option was built even though the variable in question didn't exist. The patch here fixes this by moving the capabilities checks out of the LSM and into the caller. All (known) LSMs should have been calling the capabilities hook already so it actually makes the code organization better to eliminate the hook altogether. Signed-off-by: NEric Paris <eparis@redhat.com> Acked-by: NJames Morris <jmorris@namei.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: arm: omap1: devices: need to return with a value OMAP1: camera.h: add missing include omap: dma: Add read-back to DMA interrupt handler to avoid spuriousinterrupts OMAP2: Devkit8000: Fix mmc regulator failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging由 Linus Torvalds 提交于
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (w83795) Check for BEEP pin availability hwmon: (w83795) Clear intrusion alarm immediately hwmon: (w83795) Read the intrusion state properly hwmon: (w83795) Print the actual temperature channels as sources hwmon: (w83795) List all usable temperature sources hwmon: (w83795) Expose fan control method hwmon: (w83795) Fix fan control mode attributes hwmon: (lm95241) Check validity of input values hwmon: Change mail address of Hans J. Koch
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging由 Linus Torvalds 提交于
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c: Sanity checks on adapter registration i2c: Mark i2c_adapter.id as deprecated i2c: Drivers shouldn't include <linux/i2c-id.h> i2c: Delete unused adapter IDs i2c: Remove obsolete cleanup for clientdata
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: sysfs: fix printk warnings PCI: fix pci_bus_alloc_resource() hang, prefer positive decode PCI: read current power state at enable time PCI: fix size checks for mmap() on /proc/bus/pci files x86/PCI: coalesce overlapping host bridge windows PCI hotplug: ibmphp: Add check to prevent reading beyond mapped area
-
由 Colin Cross 提交于
pm_qos_get_value had min and max reversed, causing all pm_qos requests to have no effect. Signed-off-by: NColin Cross <ccross@android.com> Acked-by: Nmark <markgross@thegnar.org> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Cc: stable@kernel.org
-
由 Jean Delvare 提交于
Make sure I2C adapters being registered have the required struct fields set. If they don't, problems will happen later. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
It's about time to make it clear that i2c_adapter.id is deprecated. Hopefully this will remind the last user to move over to a different strategy. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NJarod Wilson <jarod@redhat.com> Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com> Acked-by: NHans Verkuil <hverkuil@xs4all.nl>
-
由 Jean Delvare 提交于
Drivers don't need to include <linux/i2c-id.h>, especially not when they don't use anything that header file provides. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Michael Hunold <michael@mihu.de> Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean Delvare 提交于
Delete unused I2C adapter IDs. Special cases are: * I2C_HW_B_RIVA was still set in driver rivafb, however no other driver is ever looking for this value, so we can safely remove it. * I2C_HW_B_HDPVR is used in staging driver lirc_zilog, however no adapter ID is ever set to this value, so the code in question never runs. As the code additionally expects that I2C_HW_B_HDPVR may not be defined, we can delete it now and let the lirc_zilog driver maintainer rewrite this piece of code. Big thanks for Hans Verkuil for doing all the hard work :) Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NJarod Wilson <jarod@redhat.com> Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com> Acked-by: NHans Verkuil <hverkuil@xs4all.nl>
-
由 Wolfram Sang 提交于
A few new i2c-drivers came into the kernel which clear the clientdata-pointer on exit. This is obsolete meanwhile, so fix it and hope the word will spread. Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Acked-by: NAlan Cox <alan@linux.intel.com> Acked-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Linus Torvalds 提交于
Move the logging bits from kernel.h into printk.h so that there is a bit more logical separation of the generic from the printk logging specific parts. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jim Bos 提交于
The fix in commit 6b4e81db ("i8k: Tell gcc that *regs gets clobbered") to work around the gcc miscompiling i8k.c to add "+m (*regs)" caused register pressure problems and a build failure. Changing the 'asm' statement to 'asm volatile' instead should prevent that and works around the gcc bug as well, so we can remove the "+m". [ Background on the gcc bug: a memory clobber fails to mark the function the asm resides in as non-pure (aka "__attribute__((const))"), so if the function does nothing else that triggers the non-pure logic, gcc will think that that function has no side effects at all. As a result, callers will be mis-compiled. Adding the "+m" made gcc see that it's not a pure function, and so does "asm volatile". The problem was never really the need to mark "*regs" as changed, since the memory clobber did that part - the problem was just a bug in the gcc "pure" function analysis - Linus ] Signed-off-by: NJim Bos <jim876@xs4all.nl> Acked-by: NJakub Jelinek <jakub@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jean Delvare 提交于
On the W83795ADG, there's a single pin for BEEP and OVT#, so you can't have both. Check the configuration and don't create beep attributes when BEEP pin is not available. The W83795G has a dedicated BEEP pin so the functionality is always available there. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
由 Jean Delvare 提交于
When asked to clear the intrusion alarm, do so immediately. We have to invalidate the cache to make sure the new status will be read. But we also have to read from the status register once to clear the pending alarm, as writing to CLR_CHS surprising won't clear it automatically. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
由 Jean Delvare 提交于
We can't read the intrusion state from the real-time alarm registers as we do for all other alarm flags, because real-time alarm bits don't stick (by definition) and the intrusion state has to stick until explicitly cleared (otherwise it has little value.) So we have to use the interrupt status register instead, which is read from the same address but with a configuration bit flipped in another register. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
由 Jean Delvare 提交于
Don't expose raw register values to user-space. Decode and encode temperature channels selected as temperature sources as needed. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
由 Jean Delvare 提交于
Temperature sources are not correlated directly with temperature channels. A look-up table is required to find out which temperature sources can be used depending on which temperature channels (both analog and digital) are enabled. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
由 Jean Delvare 提交于
Expose fan control method (DC vs. PWM) using the standard sysfs attributes. I've made it read-only as the board should be wired for a given mode, the BIOS should have set up the chip for this mode, and you shouldn't have to change it. But it would be easy enough to make it changeable if someone comes up with a use case. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-