- 30 4月, 2019 40 次提交
-
-
由 Nikolay Borisov 提交于
This function is going to be used to clear out the device extent allocation information. Give it a more generic name and export it. This is in preparation to replacing the pending/pinned chunk lists with an extent tree. No functional changes. Signed-off-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Nikolay Borisov 提交于
During device shrink pinned/pending chunks (i.e. those which have been deleted/created respectively, in the current transaction and haven't touched disk) need to be accounted when doing device shrink. Presently this happens after the main relocation loop in btrfs_shrink_device, which could lead to making another go in the body of the function. Since there is no hard requirement to perform pinned/pending chunks handling after the relocation loop, move the code before it. This leads to simplifying the code flow around - i.e. no need to use 'goto again'. A notable side effect of this change is that modification of the device's size requires a transaction to be started and committed before the relocation loop starts. This is necessary to ensure that relocation process sees the shrunk device size. Signed-off-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Nikolay Borisov 提交于
We currently overload the pending_chunks list to handle updating btrfs_device->commit_bytes used. We don't actually care about the extent mapping or even the device mapping for the chunk - we just need the device, and we can end up processing it multiple times. The fs_devices->resized_list does more or less the same thing, but with the disk size. They are called consecutively during commit and have more or less the same purpose. We can combine the two lists into a single list that attaches to the transaction and contains a list of devices that need updating. Since we always add the device to a list when we change bytes_used or disk_total_size, there's no harm in copying both values at once. Signed-off-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Nikolay Borisov 提交于
Up until now trimming the freespace was done irrespective of what the arguments of the FITRIM ioctl were. For example fstrim's -o/-l arguments will be entirely ignored. Fix it by correctly handling those paramter. This requires breaking if the found freespace extent is after the end of the passed range as well as completing trim after trimming fstrim_range::len bytes. Fixes: 499f377f ("btrfs: iterate over unused chunk space in FITRIM") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Robbie Ko 提交于
Improve clone_range in two scenarios. 1. Remove the limit of inode size when find clone inodes We can do partial clone, so there is no need to limit the size of the candidate inode. When clone a range, we clone the legal range only by bytenr, offset, len, inode size. 2. In the scenarios of rewrite or clone_range, data_offset rarely matches exactly, so the chance of a clone is missed. e.g. 1. Write a 1M file dd if=/dev/zero of=1M bs=1M count=1 2. Clone 1M file cp --reflink 1M clone 3. Rewrite 4k on the clone file dd if=/dev/zero of=clone bs=4k count=1 conv=notrunc The disk layout is as follows: item 16 key (257 EXTENT_DATA 0) itemoff 15353 itemsize 53 extent data disk byte 1103101952 nr 1048576 extent data offset 0 nr 1048576 ram 1048576 extent compression(none) ... item 22 key (258 EXTENT_DATA 0) itemoff 14959 itemsize 53 extent data disk byte 1104150528 nr 4096 extent data offset 0 nr 4096 ram 4096 extent compression(none) item 23 key (258 EXTENT_DATA 4096) itemoff 14906 itemsize 53 extent data disk byte 1103101952 nr 1048576 extent data offset 4096 nr 1044480 ram 1048576 extent compression(none) When send, inode 258 file offset 4096~1048576 (item 23) has a chance to clone_range, but because data_offset does not match inode 257 (item 16), it causes missed clone and can only transfer actual data. Improve the problem by judging whether the current data_offset has overlap with the file extent item, and if so, adjusting offset and extent_len so that we can clone correctly. Reviewed-by: NFilipe Manana <fdmanana@suse.com> Signed-off-by: NRobbie Ko <robbieko@synology.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Anand Jain 提交于
When an inode inherits property from its parent, we call btrfs_set_prop(). btrfs_set_prop() does an elaborate checks, which is not required in the context of inheriting a property. Instead just open-code only the required items from btrfs_set_prop() and then call btrfs_setxattr() directly. So now the only user of btrfs_set_prop() is gone, (except for the wraper function btrfs_set_prop_trans()). Reviewed-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NAnand Jain <anand.jain@oracle.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Anand Jain 提交于
@device_name in mount_subvol() is not used, drop it. Also see: 5bedc48a ("btrfs: drop unused parameters from mount_subvol"). Signed-off-by: NAnand Jain <anand.jain@oracle.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from extent buffer and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from extent buffer and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from extent buffer and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from extent buffer and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from extent buffer and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from extent buffer and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from extent buffer and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from extent buffer and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from extent buffer and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from extent buffer and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from extent buffer and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from extent buffer and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from extent buffer and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from extent buffer and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Qu Wenruo 提交于
[BUG] When accessing a file on a crafted image, btrfs can crash in block layer: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 PGD 136501067 P4D 136501067 PUD 124519067 PMD 0 CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.0.0-rc8-default #252 RIP: 0010:end_bio_extent_readpage+0x144/0x700 Call Trace: <IRQ> blk_update_request+0x8f/0x350 blk_mq_end_request+0x1a/0x120 blk_done_softirq+0x99/0xc0 __do_softirq+0xc7/0x467 irq_exit+0xd1/0xe0 call_function_single_interrupt+0xf/0x20 </IRQ> RIP: 0010:default_idle+0x1e/0x170 [CAUSE] The crafted image has a tricky corruption, the INODE_ITEM has a different type against its parent dir: item 20 key (268 INODE_ITEM 0) itemoff 2808 itemsize 160 generation 13 transid 13 size 1048576 nbytes 1048576 block group 0 mode 121644 links 1 uid 0 gid 0 rdev 0 sequence 9 flags 0x0(none) This mode number 0120000 means it's a symlink. But the dir item think it's still a regular file: item 8 key (264 DIR_INDEX 5) itemoff 3707 itemsize 32 location key (268 INODE_ITEM 0) type FILE transid 13 data_len 0 name_len 2 name: f4 item 40 key (264 DIR_ITEM 51821248) itemoff 1573 itemsize 32 location key (268 INODE_ITEM 0) type FILE transid 13 data_len 0 name_len 2 name: f4 For symlink, we don't set BTRFS_I(inode)->io_tree.ops and leave it empty, as symlink is only designed to have inlined extent, all handled by tree block read. Thus no need to trigger btrfs_submit_bio_hook() for inline file extent. However end_bio_extent_readpage() expects tree->ops populated, as it's reading regular data extent. This causes NULL pointer dereference. [FIX] This patch fixes the problem in two ways: - Verify inode mode against its dir item when looking up inode So in btrfs_lookup_dentry() if we find inode mode mismatch with dir item, we error out so that corrupted inode will not be accessed. - Verify inode mode when getting extent mapping Only regular file should have regular or preallocated extent. If we found regular/preallocated file extent for symlink or the rest, we error out before submitting the read bio. With this fix that crafted image can be rejected gracefully: BTRFS critical (device loop0): inode mode mismatch with dir: inode mode=0121644 btrfs type=7 dir type=1 Reported-by: NYoon Jungyeon <jungyeon@gatech.edu> Link: https://bugzilla.kernel.org/show_bug.cgi?id=202763Reviewed-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NQu Wenruo <wqu@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Qu Wenruo 提交于
There is a report in kernel bugzilla about mismatch file type in dir item and inode item. This inspires us to check inode mode in inode item. This patch will check the following members: - inode key objectid Should be ROOT_DIR_DIR or [256, (u64)-256] or FREE_INO. - inode key offset Should be 0 - inode item generation - inode item transid No newer than sb generation + 1. The +1 is for log tree. - inode item mode No unknown bits. No invalid S_IF* bit. NOTE: S_IFMT check is not enough, need to check every know type. - inode item nlink Dir should have no more link than 1. - inode item flags Reviewed-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Signed-off-by: NQu Wenruo <wqu@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Qu Wenruo 提交于
Btrfs-progs already have a comprehensive type checker, to ensure there is only 0 (SINGLE profile) or 1 (DUP/RAID0/1/5/6/10) bit set for chunk profile bits. Do the same work for kernel. Reported-by: NYoon Jungyeon <jungyeon@gatech.edu> Link: https://bugzilla.kernel.org/show_bug.cgi?id=202765Reviewed-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Signed-off-by: NQu Wenruo <wqu@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Qu Wenruo 提交于
[BUG] For fuzzed image whose DEV_ITEM has invalid total_bytes as 0, then kernel will just panic: BUG: unable to handle kernel NULL pointer dereference at 0000000000000098 #PF error: [normal kernel read fault] PGD 800000022b2bd067 P4D 800000022b2bd067 PUD 22b2bc067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 1106 Comm: mount Not tainted 5.0.0-rc8+ #9 RIP: 0010:btrfs_verify_dev_extents+0x2a5/0x5a0 Call Trace: open_ctree+0x160d/0x2149 btrfs_mount_root+0x5b2/0x680 [CAUSE] If device extent verification finds a deivce with 0 total_bytes, then it assumes it's a seed dummy, then search for seed devices. But in this case, there is no seed device at all, causing NULL pointer. [FIX] Since this is caused by fuzzed image, let's go the tree-check way, just add a new verification for device item. Reported-by: NYoon Jungyeon <jungyeon@gatech.edu> Link: https://bugzilla.kernel.org/show_bug.cgi?id=202691Reviewed-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NQu Wenruo <wqu@suse.com> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Qu Wenruo 提交于
Since we have btrfs_check_chunk_valid() in tree-checker, let's do chunk item verification in tree-checker too. Since the tree-checker is run at endio time, if one chunk leaf fails chunk verification, we can still retry the other copy, making btrfs more robust to fuzzed image as we may still get a good chunk item. Also since we have done chunk verification in tree block read time, skip the btrfs_check_chunk_valid() call in read_one_chunk() if we're reading chunk items from leaf. Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Signed-off-by: NQu Wenruo <wqu@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Qu Wenruo 提交于
To follow the standard behavior of tree-checker. Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Signed-off-by: NQu Wenruo <wqu@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Qu Wenruo 提交于
Old error message would be something like: BTRFS error (device dm-3): invalid chunk num_stipres: 0 New error message would be: Btrfs critical (device dm-3): corrupt superblock syschunk array: chunk_start=2097152, invalid chunk num_stripes: 0 Or Btrfs critical (device dm-3): corrupt leaf: root=3 block=8388608 slot=3 chunk_start=2097152, invalid chunk num_stripes: 0 And for certain error message, also output expected value. The error message levels are changed from error to critical. Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Signed-off-by: NQu Wenruo <wqu@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Qu Wenruo 提交于
By function, chunk item verification is more suitable to be done inside tree-checker. So move btrfs_check_chunk_valid() to tree-checker.c and export it. And since it's now moved to tree-checker, also add a better comment for what this function is doing. Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Signed-off-by: NQu Wenruo <wqu@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
The commit fcebe456 ("Btrfs: rework qgroup accounting") reworked qgroups and added some new structures. Another rework of qgroup mechanics e69bcee3 ("btrfs: qgroup: Cleanup the old ref_node-oriented mechanism.") stopped using them and left uncleaned. Reviewed-by: NQu Wenruo <wqu@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from extent buffer and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from extent buffer and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from extent buffer and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from extent buffer and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from extent buffer and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from extent buffer and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from extent buffer and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from extent buffer and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from extent buffer and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can read fs_info from extent buffer and can drop it from the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-