- 19 9月, 2013 5 次提交
-
-
由 Sachin Kamat 提交于
ade7854_probe can fail. Return the value obtained from it instead of 0 (success). Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Cc: Barry Song <21cnbao@gmail.com> Signed-off-by: NJonathan Cameron <jic23@kernel.org>
-
由 Peter Meerwald 提交于
recently broken, cd6fe065 staging:iio:hmc5843: Use i2c_smbus_read_word_swapped() Signed-off-by: NPeter Meerwald <pmeerw@pmeerw.net> Signed-off-by: NJonathan Cameron <jic23@kernel.org>
-
由 Derek Basehore 提交于
The lux_uscale value is not initialized at probe. The value will be uninitialized unless a value is written to it through the iio channel interface. This fixes that. Signed-off-by: NDerek Basehore <dbasehore@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/65998Signed-off-by: NJonathan Cameron <jic23@kernel.org>
-
由 Jonathan Cameron 提交于
staging:iio:dummy fix kfifo_buf kconfig dependency issue if kfifo modular and buffer enabled for built in dummy driver. This only occurs in the unlikely event that the example driver is built in whilst the buffer implementation is not. Solved by switching from a depends on to a select for this particular case. Reported-by: NFengguang Wu <fengguang.wu@intel.com> Reported-by: NRandy Dunlap <rdunlap@infradead.org> Acked-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NJonathan Cameron <jic23@kernel.org>
-
由 Josh Wu 提交于
The adc_clk variable is currently defined using a 32-bits unsigned integer, which will overflow under some very valid range of operations. Such overflow will occur if, for example, the parent clock is set to a 20MHz frequency and the ADC startup time is larger than 215ns. To fix this, introduce an intermediate variable holding the clock rate in kHz. Signed-off-by: NJosh Wu <josh.wu@atmel.com> Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: NJonathan Cameron <jic23@kernel.org>
-
- 17 9月, 2013 25 次提交
-
-
由 Dan Carpenter 提交于
"source" comes from the user in snd_ctl_elem_write() so it needs to be checked. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Ben Hutchings 提交于
The Fastwel UNIOxx-5 is a PC/104 board, so put COMEDI_UNIOXX5 under COMEDI_ISA_DRIVERS. The DIL/Net-PC 1486 is a 486 system, so put COMEDI_SSV_DNP under COMEDI_MISC_DRIVERS and add a dependency on X86_32 || COMPILE_TEST. Reviewed-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Larry Finger 提交于
In some circumstances, the performance of this driver is highly degraded, and ifconfig reports large numbers of dropped packets. By increasing the maximum RX gain from 0x3e to 0x4e, performance is greatly improved. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Larry Finger 提交于
Smatch shows the following warning: drivers/staging/rtl8188eu/core/rtw_ieee80211.c:161 rtw_set_ie() info: ignoring unreachable code. The cause is a module exit tracing statement after a return. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Larry Finger 提交于
Smatch reports the following warning: "drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:8328 mlme_evt_hdl() error: buffer overflow 'wlanevents' 24 <= 24" 8321 /* checking if event code is valid */ 8322 if (evt_code >= MAX_C2HEVT) { ^^^^^^^^^^^^^^^^^^^^^^ 8323 RT_TRACE(_module_rtl871x_cmd_c_, _drv_err_, ("\nEvent Code(%d) mismatch!\n", evt_code)); 8324 goto _abort_event_; 8325 } 8326 8327 /* checking if event size match the event parm size */ 8328 if ((wlanevents[evt_code].parmsize != 0) && ^^^^^^^^^^^^^^^^^^^^ 8329 (wlanevents[evt_code].parmsize != evt_sz)) { 8330 RT_TRACE(_module_rtl871x_cmd_c_, _drv_err_, 8331 ("\nEvent(%d) Parm Size mismatch (%d vs %d)!\n", 8332 evt_code, wlanevents[evt_code].parmsize, evt_sz)); 8333 goto _abort_event_; 8334 } This warning results because the number of items in "enum rtw_c2h_event", which determines the value of MAX_C2HEVT, is one more than in "struct wlanevents". Adding an extra dummy event to the latter fixes the problem. Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Larry Finger 提交于
Smatch reports the following warning: "drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c:2008 Hal_ReadPowerValueFromPROM_8188E() error: buffer overflow 'pwrInfo24G->IndexBW40_Base[rfPath]' 5 <= 5" drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c 2005 /* 2.4G default value */ 2006 for (group = 0; group < MAX_CHNL_GROUP_24G; group++) { 2007 pwrInfo24G->IndexCCK_Base[rfPath][group] = EEPROM_DEFAULT_24G_INDEX; 2008 pwrInfo24G->IndexBW40_Base[rfPath][group] = EEPROM_DEFAULT_24G_INDEX; The reason is that IndexCCK_Base[] has MAX_CHNL_GROUP_24G elements, but IndexBW40_Base is smaller by 1. Make them both have MAX_CHNL_GROUP_24G elements. Reported by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Guenter Roeck 提交于
mips allmodconfig fails with ERROR: "copy_from_user_page" [drivers/staging/lustre/lustre/libcfs/libcfs.ko] undefined! which is due to LUSTRE using copy_from_user_page which is not exported by any architecture. Unfortunately, LUSTRE can only be built as module, so there is no easy fix. MIPS, SH, and optionally XTENSA implement copy_from_user_page as unexported functions. Disable LUSTRE for those. Cc: Peng Tao <bergwolf@gmail.com> Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
This reverts commit c70bda99. It's incorrect, Kay writes: Please just remove it. "devname" is meant to be used for single-instance devices with a static dev_t, never for things like zramX. It will not do anything useful here, it does nothing really without a statically assigned dev_t, and it should not be used for devices of this kind anyway. Reported-by: NTom Gundersen <teg@jklm.no> Reported-by: NKay Sievers <kay@vrfy.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Aaro Koskinen 提交于
Enable only those interrupts that we can handle & acknowledge in the interrupt handler. At least on EdgeRouter Lite, the hardware may occasionally interrupt with some error condition when the physical link status changes frequently. Since the interrupt condition is not acked properly, this leads to the following warning and the IRQ gets disabled completely: [ 41.324700] eth0: Link down [ 44.324721] eth0: 1000 Mbps Full duplex, port 0, queue 0 [ 44.885590] irq 117: nobody cared (try booting with the "irqpoll" option) [ 44.892397] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.11.0-rc5-edge-los.git-27d042f-dirty-00950-gaa42f2d-dirty #8 [ 44.902825] Stack : ffffffff815c0000 0000000000000004 0000000000000003 0000000000000000 ffffffff81fd0000 ffffffff815c0000 0000000000000004 ffffffff8118530c ffffffff815c0000 ffffffff811858d8 0000000000000000 0000000000000000 ffffffff81fd0000 ffffffff81fc0000 ffffffff8152f3a0 ffffffff815b7bf7 ffffffff81fc6688 ffffffff815b8060 0000000000000000 0000000000000000 0000000000000000 ffffffff815346c8 ffffffff815346b0 ffffffff814a6a18 ffffffff8158b848 ffffffff81145614 ffffffff81593800 ffffffff81187174 ffffffff815b7d00 ffffffff8158b760 0000000000000000 ffffffff814a9184 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 ffffffff811203b8 0000000000000000 0000000000000000 ... [ 44.968408] Call Trace: [ 44.970873] [<ffffffff811203b8>] show_stack+0x68/0x80 [ 44.975937] [<ffffffff814a9184>] dump_stack+0x78/0xb8 [ 44.980999] [<ffffffff811aac54>] __report_bad_irq+0x44/0x108 [ 44.986662] [<ffffffff811ab238>] note_interrupt+0x248/0x2a0 [ 44.992240] [<ffffffff811a85e4>] handle_irq_event_percpu+0x144/0x200 [ 44.998598] [<ffffffff811a86f4>] handle_irq_event+0x54/0x90 [ 45.004176] [<ffffffff811ab908>] handle_level_irq+0xd0/0x148 [ 45.009839] [<ffffffff811a7b04>] generic_handle_irq+0x34/0x50 [ 45.015589] [<ffffffff8111dae8>] do_IRQ+0x18/0x30 [ 45.020301] [<ffffffff8110486c>] plat_irq_dispatch+0x74/0xb8 [ 45.025958] [ 45.027451] handlers: [ 45.029731] [<ffffffff813fca10>] cvm_oct_rgmii_rml_interrupt [ 45.035397] Disabling IRQ #117 [ 45.038742] Port 0 receive error code 13, packet dropped [ 46.324719] eth0: Link down [ 48.324733] eth0: 1000 Mbps Full duplex, port 0, queue 0 Reported-by: N"Jason A. Donenfeld" <Jason@zx2c4.com> Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi> Acked-by: NDavid Daney <david.daney@cavium.com> Acked-by: NJason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Aaro Koskinen 提交于
Remove skb allocation failure warnings. They will trigger a page allocation warning already. Also, one of the warnings was not ratelimited, causing the box to lock up under heavy traffic & low memory. Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi> Acked-by: NDavid Daney <david.daney@cavium.com> Acked-by: NJason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Aaro Koskinen 提交于
We should count also dropped packets, otherwise the NAPI handler may end up running too long. Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi> Acked-by: NJason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Andrew Morton 提交于
It duplicates the definition in arch/alpha/include/asm/pgtable.h and emits warnings. Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Peng Tao <tao.peng@emc.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Kees Cook 提交于
Make sure that format strings cannot leak into printk() calls from the msgbuf string. Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Kees Cook 提交于
This fixes up the usage of snprintf, strncpy, and format strings in the call to kthread_run to avoid ever accidentally allowing a format string into the thread name. Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Kees Cook 提交于
The boot message buffer could potentially overflow the stack and the heap. Additionally make sure format strings could not leak into printk() calls. Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Kees Cook 提交于
Makes sure format string cannot leak into device_create() call. Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Geert Uytterhoeven 提交于
drivers/staging/rtl8188eu/core/rtw_wlan_util.c: In function ‘WMMOnAssocRsp’: drivers/staging/rtl8188eu/core/rtw_wlan_util.c:634: warning: ‘change_inx’ may be used uninitialized in this function And the compiler is right: change_inx should be initialized to false. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Acked-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Geert Uytterhoeven 提交于
LUSTRE_TRANSLATE_ERRNOS is never enabled, a "true" is not a valid value. Use "default y" instead of "default true" to fix this. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Dave Jones 提交于
The indentation in the swGetOFDMControlRate function is screwed up. At first it appears that there are missing braces on a multi-line if, but looking at history, commit dd0a774f ("staging: vt6656: card/main_usb/device use new structure names") incorrectly indented the two lines below. Signed-off-by: NDave Jones <davej@fedoraproject.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Dave Jones 提交于
Signed-off-by: NDave Jones <davej@fedoraproject.org> Acked-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer code update from Thomas Gleixner: - armada SoC clocksource overhaul with a trivial merge conflict - Minor improvements to various SoC clocksource drivers * 'timers/core' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: armada-370-xp: Add detailed clock requirements in devicetree binding clocksource: armada-370-xp: Get reference fixed-clock by name clocksource: armada-370-xp: Replace WARN_ON with BUG_ON clocksource: armada-370-xp: Fix device-tree binding clocksource: armada-370-xp: Introduce new compatibles clocksource: armada-370-xp: Use CLOCKSOURCE_OF_DECLARE clocksource: armada-370-xp: Simplify TIMER_CTRL register access clocksource: armada-370-xp: Use BIT() ARM: timer-sp: Set dynamic irq affinity ARM: nomadik: add dynamic irq flag to the timer clocksource: sh_cmt: 32-bit control register support clocksource: em_sti: Convert to devm_* managed helpers
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull CIFS fixes from Steve French: "Two minor cifs fixes and a minor documentation cleanup for cifs.txt" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: cifs: update cifs.txt and remove some outdated infos cifs: Avoid calling unlock_page() twice in cifs_readpage() when using fscache cifs: Do not take a reference to the page in cifs_readpage_worker()
-
git://git.infradead.org/linux-ubi由 Linus Torvalds 提交于
Pull UBI fixes from Artem Bityutskiy: "Just a single fastmap fix plus a regression fix" * tag 'upstream-3.12-rc1' of git://git.infradead.org/linux-ubi: UBI: Fix invalidate_fastmap() UBI: Fix PEB leak in wear_leveling_worker()
-
git://git.infradead.org/linux-ubifs由 Linus Torvalds 提交于
Pull ubifs fix from Artem Bityutskiy: "Just one patch which fixes the power-cut recovery testing mode. I'll start using a single UBI/UBIFS tree instead of 2 trees from now on. So in the future you'll get 1 small pull request instead of 2 tiny ones" * tag 'upstream-3.12-rc1' of git://git.infradead.org/linux-ubifs: UBIFS: remove invalid warn msg with tst_recovery enabled
-
- 16 9月, 2013 3 次提交
-
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS fixes from Ralf Baechle: "These are four patches for three construction sites: - Fix register decoding for the combination of multi-core processors and multi-threading. - Two more fixes that are part of the ongoing DECstation resurrection work. One of these touches a DECstation-only network driver. - Finally Markos' trivial build fix for the AP/SP support. (With this applied now all MIPS defconfigs are building again)" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: kernel: vpe: Make vpe_attrs an array of pointers. MIPS: Fix SMP core calculations when using MT support. MIPS: DECstation I/O ASIC DMA interrupt handling fix MIPS: DECstation HRT initialization rearrangement
-
git://cavan.codon.org.uk/platform-drivers-x86由 Linus Torvalds 提交于
Pull x86 platform updates from Matthew Garrett: "Nothing amazing here, almost entirely cleanups and minor bugfixes and one bit of hardware enablement in the amilo-rfkill driver" * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: platform/x86: panasonic-laptop: reuse module_acpi_driver samsung-laptop: fix config build error platform: x86: remove unnecessary platform_set_drvdata() amilo-rfkill: Enable using amilo-rfkill with the FSC Amilo L1310. wmi: parse_wdg() should return kernel error codes hp_wmi: Fix unregister order in hp_wmi_rfkill_setup() platform: replace strict_strto*() with kstrto*() x86: irst: use module_acpi_driver to simplify the code x86: smartconnect: use module_acpi_driver to simplify the code platform samsung-q10: use ACPI instead of direct EC calls thinkpad_acpi: add the ability setting TPACPI_LED_NONE by quirk thinkpad_acpi: return -NODEV while operating uninitialized LEDs
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull misc SCSI driver updates from James Bottomley: "This patch set is a set of driver updates (megaraid_sas, fnic, lpfc, ufs, hpsa) we also have a couple of bug fixes (sd out of bounds and ibmvfc error handling) and the first round of esas2r checker fixes and finally the much anticipated big endian additions for megaraid_sas" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (47 commits) [SCSI] fnic: fnic Driver Tuneables Exposed through CLI [SCSI] fnic: Kernel panic while running sh/nosh with max lun cfg [SCSI] fnic: Hitting BUG_ON(io_req->abts_done) in fnic_rport_exch_reset [SCSI] fnic: Remove QUEUE_FULL handling code [SCSI] fnic: On system with >1.1TB RAM, VIC fails multipath after boot up [SCSI] fnic: FC stat param seconds_since_last_reset not getting updated [SCSI] sd: Fix potential out-of-bounds access [SCSI] lpfc 8.3.42: Update lpfc version to driver version 8.3.42 [SCSI] lpfc 8.3.42: Fixed issue of task management commands having a fixed timeout [SCSI] lpfc 8.3.42: Fixed inconsistent spin lock usage. [SCSI] lpfc 8.3.42: Fix driver's abort loop functionality to skip IOs already getting aborted [SCSI] lpfc 8.3.42: Fixed failure to allocate SCSI buffer on PPC64 platform for SLI4 devices [SCSI] lpfc 8.3.42: Fix WARN_ON when driver unloads [SCSI] lpfc 8.3.42: Avoided making pci bar ioremap call during dual-chute WQ/RQ pci bar selection [SCSI] lpfc 8.3.42: Fixed driver iocbq structure's iocb_flag field running out of space [SCSI] lpfc 8.3.42: Fix crash on driver load due to cpu affinity logic [SCSI] lpfc 8.3.42: Fixed logging format of setting driver sysfs attributes hard to interpret [SCSI] lpfc 8.3.42: Fixed back to back RSCNs discovery failure. [SCSI] lpfc 8.3.42: Fixed race condition between BSG I/O dispatch and timeout handling [SCSI] lpfc 8.3.42: Fixed function mode field defined too small for not recognizing dual-chute mode ...
-
- 15 9月, 2013 4 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux由 Linus Torvalds 提交于
Pull SLAB update from Pekka Enberg: "Nothing terribly exciting here apart from Christoph's kmalloc unification patches that brings sl[aou]b implementations closer to each other" * 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux: slab: Use correct GFP_DMA constant slub: remove verify_mem_not_deleted() mm/sl[aou]b: Move kmallocXXX functions to common code mm, slab_common: add 'unlikely' to size check of kmalloc_slab() mm/slub.c: beautify code for removing redundancy 'break' statement. slub: Remove unnecessary page NULL check slub: don't use cpu partial pages on UP mm/slub: beautify code for 80 column limitation and tab alignment mm/slub: remove 'per_cpu' which is useless variable
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull input update from Dmitry Torokhov: "The only change is David Hermann's new EVIOCREVOKE evdev ioctl that allows safely passing file descriptors to input devices to session processes and later being able to stop delivery of events through these fds so that inactive sessions will no longer receive user input that does not belong to them" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: evdev - add EVIOCREVOKE ioctl
-
由 Linus Torvalds 提交于
Sedat points out that I transposed some letters in "LRU" and wrote "RLU" instead in one of the new comments explaining the flow. Let's just fix it. Reported-by: NSedat Dilek <sedat.dilek@jpberlin.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Davidlohr Bueso 提交于
Matt found that commit 27a7c642 ("partitions/efi: account for pmbr size in lba") caused his GPT formatted eMMC device not to boot. The reason is that this commit enforced Linux to always check the lesser of the whole disk or 2Tib for the pMBR size in LBA. While most disk partitioning tools out there create a pMBR with these characteristics, Microsoft does not, as it always sets the entry to the maximum 32-bit limitation - even though a drive may be smaller than that[1]. Loosen this check and only verify that the size is either the whole disk or 0xFFFFFFFF. No tool in its right mind would set it to any value other than these. [1] http://thestarman.pcministry.com/asm/mbr/GPT.htm#GPTPTReported-and-tested-by: NMatt Porter <matt.porter@linaro.org> Signed-off-by: NDavidlohr Bueso <davidlohr@hp.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 9月, 2013 3 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux由 Linus Torvalds 提交于
Pull writeback fix from Wu Fengguang: "A trivial writeback fix" * tag 'writeback-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux: writeback: Do not sort b_io list only because of block device inode
-
由 Linus Torvalds 提交于
The LRU list changes interacted badly with our nr_dentry_unused accounting, and even worse with the new DCACHE_LRU_LIST bit logic. This introduces helper functions to make sure everything follows the proper dcache d_lru list rules: the dentry cache is complicated by the fact that some of the hotpaths don't even want to look at the LRU list at all, and the fact that we use the same list entry in the dentry for both the LRU list and for our temporary shrinking lists when removing things from the LRU. The helper functions temporarily have some extra sanity checking for the flag bits that have to match the current LRU state of the dentry. We'll remove that before the final 3.12 release, but considering how easy it is to get wrong, this first cleanup version has some very particular sanity checking. Acked-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Björn Jacke 提交于
Acked-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NBjörn JACKE <bj@sernet.de> Signed-off-by: NSteve French <smfrench@gmail.com>
-