Clean up menu structure, introduce TRACING_SUPPORT switch that signals
whether an architecture supports various instrumentation mechanisms.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch creates the event tracing infrastructure of ftrace.
It will create the files:

 /debug/tracing/available_events
 /debug/tracing/set_event

The available_events will list the trace points that have been
registered with the event tracer.

set_events will allow the user to enable or disable an event hook.

example:

 # echo sched_wakeup > /debug/tracing/set_event

Will enable the sched_wakeup event (if it is registered).

 # echo "!sched_wakeup" >> /debug/tracing/set_event

Will disable the sched_wakeup event (and only that event).

 # echo > /debug/tracing/set_event

Will disable all events (notice the '>')

 # cat /debug/tracing/available_events > /debug/tracing/set_event

Will enable all registered event hooks.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: fix output of function tracer to be useful

The function tracer is pretty useless if KALLSYMS is not configured.
Unless you are good at reading hex values, the function tracer should
select the KALLSYMS configuration.

Also, the dynamic function tracer will fail its self test if KALLSYMS
is not selected.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: cosmetic change in Kconfig menu layout

This patch was originally suggested by Peter Zijlstra, but seems it
was forgotten.

CONFIG_MMIOTRACE and CONFIG_MMIOTRACE_TEST were selectable
directly under the Kernel hacking / debugging menu in the kernel
configuration system. They were present only for x86 and x86_64.

Other tracers that use the ftrace tracing framework are in their own
sub-menu. This patch moves the mmiotrace configuration options there.
Since the Kconfig file, where the tracer menu is, is not architecture
specific, HAVE_MMIOTRACE_SUPPORT is introduced and provided only by
x86/x86_64. CONFIG_MMIOTRACE now depends on it.
Signed-off-by: NPekka Paalanen <pq@iki.fi>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add the missing pair tracing_{start,stop}_record_cmdline() to record well
the cmdline associated with pid.

Changes in v2:

- fix a build error, the sched_switch tracer is needed to record the
  cmdline.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: build fix

The BLK_DEV_IO_TRACE entry used to be in block/Kconfig - which
file itself was dependent on CONFIG_BLOCK. But now the entry is
in kernel/trace/Kconfig - which is present even on !CONFIG_BLOCK.

So add a 'depends on BLOCK' to BLK_DEV_IO_TRACE.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

Move blktrace.c to kernel/trace, also move its config entry.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: prevent deadlock in NMI

The ring buffers are not yet totally lockless with writing to
the buffer. When a writer crosses a page, it grabs a per cpu spinlock
to protect against a reader. The spinlocks taken by a writer are not
to protect against other writers, since a writer can only write to
its own per cpu buffer. The spinlocks protect against readers that
can touch any cpu buffer. The writers are made to be reentrant
with the spinlocks disabling interrupts.

The problem arises when an NMI writes to the buffer, and that write
crosses a page boundary. If it grabs a spinlock, it can be racing
with another writer (since disabling interrupts does not protect
against NMIs) or with a reader on the same CPU. Luckily, most of the
users are not reentrant and protects against this issue. But if a
user of the ring buffer becomes reentrant (which is what the ring
buffers do allow), if the NMI also writes to the ring buffer then
we risk the chance of a deadlock.

This patch moves the ftrace_nmi_enter called by nmi_enter() to the
ring buffer code. It replaces the current ftrace_nmi_enter that is
used by arch specific code to arch_ftrace_nmi_enter and updates
the Kconfig to handle it.

When an NMI is called, it will set a per cpu variable in the ring buffer
code and will clear it when the NMI exits. If a write to the ring buffer
crosses page boundaries inside an NMI, a trylock is used on the spin
lock instead. If the spinlock fails to be acquired, then the entry
is discarded.

This bug appeared in the ftrace work in the RT tree, where event tracing
is reentrant. This workaround solved the deadlocks that appeared there.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Now that we have a working ftrace=<tracer> function, make the boot
tracer get activated by it. This way we can turn it on or off without
recompiling the kernel, as well as keeping the selftests on. The
selftests are disabled whenever a default tracer starts running.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: new tracer

The workqueue tracer provides some statistical informations
about each cpu workqueue thread such as the number of the
works inserted and executed since their creation. It can help
to evaluate the amount of work each of them have to perform.
For example it can help a developer to decide whether he should
choose a per cpu workqueue instead of a singlethreaded one.

It only traces statistical informations for now but it will probably later
provide event tracing too.

Such a tracer could help too, and be improved, to help rt priority sorted
workqueue development.

To have a snapshot of the workqueues state at any time, just do

cat /debugfs/tracing/trace_stat/workqueues

Ie:

  1    125        125       reiserfs/1
  1      0          0       scsi_tgtd/1
  1      0          0       aio/1
  1      0          0       ata/1
  1    114        114       kblockd/1
  1      0          0       kintegrityd/1
  1   2147       2147       events/1

  0      0          0       kpsmoused
  0    105        105       reiserfs/0
  0      0          0       scsi_tgtd/0
  0      0          0       aio/0
  0      0          0       ata_aux
  0      0          0       ata/0
  0      0          0       cqueue
  0      0          0       kacpi_notify
  0      0          0       kacpid
  0    149        149       kblockd/0
  0      0          0       kintegrityd/0
  0   1000       1000       khelper
  0   2270       2270       events/0

Changes in V2:

_ Drop the static array based on NR_CPU and dynamically allocate the stat array
  with num_possible_cpus() and other cpu mask facilities....
_ Trace workqueue insertion at a bit lower level (insert_work instead of queue_work) to handle
  even the workqueue barriers.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cosmetic change in Kconfig menu layout

This patch was originally suggested by Peter Zijlstra, but seems it
was forgotten.

CONFIG_MMIOTRACE and CONFIG_MMIOTRACE_TEST were selectable
directly under the Kernel hacking / debugging menu in the kernel
configuration system. They were present only for x86 and x86_64.

Other tracers that use the ftrace tracing framework are in their own
sub-menu. This patch moves the mmiotrace configuration options there.
Since the Kconfig file, where the tracer menu is, is not architecture
specific, HAVE_MMIOTRACE_SUPPORT is introduced and provided only by
x86/x86_64. CONFIG_MMIOTRACE now depends on it.
Signed-off-by: NPekka Paalanen <pq@iki.fi>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

kmemtrace now uses ftrace. This patch removes the relay version.
Signed-off-by: NEduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: build fix

Also fix up Kconfig dependencies and include files.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: new tracer plugin

This patch adapts kmemtrace raw events tracing to the unified tracing API.

To enable and use this tracer, just do the following:

 echo kmemtrace > /debugfs/tracing/current_tracer
 cat /debugfs/tracing/trace

You will have the following output:

 # tracer: kmemtrace
 #
 #
 # ALLOC  TYPE  REQ   GIVEN  FLAGS           POINTER         NODE    CALLER
 # FREE   |      |     |       |              |   |            |        |
 # |

type_id 1 call_site 18446744071565527833 ptr 18446612134395152256
type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1
type_id 1 call_site 18446744071565585534 ptr 18446612134405955584
type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1
type_id 0 call_site 18446744071565636711 ptr 18446612134345164672 bytes_req 240 bytes_alloc 240 gfp_flags 208 node -1
type_id 1 call_site 18446744071565585534 ptr 18446612134405955584
type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1
type_id 0 call_site 18446744071565636711 ptr 18446612134345164912 bytes_req 240 bytes_alloc 240 gfp_flags 208 node -1
type_id 1 call_site 18446744071565585534 ptr 18446612134405955584
type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1
type_id 0 call_site 18446744071565636711 ptr 18446612134345165152 bytes_req 240 bytes_alloc 240 gfp_flags 208 node -1
type_id 0 call_site 18446744071566144042 ptr 18446612134346191680 bytes_req 1304 bytes_alloc 1312 gfp_flags 208 node -1
type_id 1 call_site 18446744071565585534 ptr 18446612134405955584
type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1
type_id 1 call_site 18446744071565585534 ptr 18446612134405955584

That was to stay backward compatible with the format output produced in
inux/tracepoint.h.

This is the default ouput, but note that I tried something else.

If you change an option:

echo kmem_minimalistic > /debugfs/trace_options

and then cat /debugfs/trace, you will have the following output:

 # tracer: kmemtrace
 #
 #
 # ALLOC  TYPE  REQ   GIVEN  FLAGS           POINTER         NODE    CALLER
 # FREE   |      |     |       |              |   |            |        |
 # |

   -      C                            0xffff88007c088780          file_free_rcu
   +      K   4096   4096   000000d0   0xffff88007cad6000     -1   getname
   -      C                            0xffff88007cad6000          putname
   +      K   4096   4096   000000d0   0xffff88007cad6000     -1   getname
   +      K    240    240   000000d0   0xffff8800790dc780     -1   d_alloc
   -      C                            0xffff88007cad6000          putname
   +      K   4096   4096   000000d0   0xffff88007cad6000     -1   getname
   +      K    240    240   000000d0   0xffff8800790dc870     -1   d_alloc
   -      C                            0xffff88007cad6000          putname
   +      K   4096   4096   000000d0   0xffff88007cad6000     -1   getname
   +      K    240    240   000000d0   0xffff8800790dc960     -1   d_alloc
   +      K   1304   1312   000000d0   0xffff8800791d7340     -1   reiserfs_alloc_inode
   -      C                            0xffff88007cad6000          putname
   +      K   4096   4096   000000d0   0xffff88007cad6000     -1   getname
   -      C                            0xffff88007cad6000          putname
   +      K    992   1000   000000d0   0xffff880079045b58     -1   alloc_inode
   +      K    768   1024   000080d0   0xffff88007c096400     -1   alloc_pipe_info
   +      K    240    240   000000d0   0xffff8800790dca50     -1   d_alloc
   +      K    272    320   000080d0   0xffff88007c088780     -1   get_empty_filp
   +      K    272    320   000080d0   0xffff88007c088000     -1   get_empty_filp

Yeah I shall confess kmem_minimalistic should be: kmem_alternative.

Whatever, I find it more readable but this a personal opinion of course.
We can drop it if you want.

On the ALLOC/FREE column, + means an allocation and - a free.

On the type column, you have K = kmalloc, C = cache, P = page

I would like the flags to be GFP_* strings but that would not be easy to not
break the column with strings....

About the node...it seems to always be -1. I don't know why but that shouldn't
be difficult to find.

I moved linux/tracepoint.h to trace/tracepoint.h as well. I think that would
be more easy to find the tracer headers if they are all in their common
directory.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: enhancement to stack tracer

The stack tracer currently is either on when configured in or
off when it is not. It can not be disabled when it is configured on.
(besides disabling the function tracer that it uses)

This patch adds a way to enable or disable the stack tracer at
run time. It defaults off on bootup, but a kernel parameter 'stacktrace'
has been added to enable it on bootup.

A new sysctl has been added "kernel.stack_tracer_enabled" to let
the user enable or disable the stack tracer at run time.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: restructure code, cleanup

Remove BTS bits from the hw-branch-tracer (renamed from bts-tracer) and
use the ds interface.
Signed-off-by: NMarkus Metzger <markut.t.metzger@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

CONFIG_FUNCTION_GRAPH_TRACER depends on FUNCTION_TRACER already,
(turning it non-default) so it so making it default-n is pointless.

So enable it by default - it's a nice extension of the function tracer.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: new "power-tracer" ftrace plugin

This patch adds a C/P-state ftrace plugin that will generate
detailed statistics about the C/P-states that are being used,
so that we can look at detailed decisions that the C/P-state
code is making, rather than the too high level "average"
that we have today.

An example way of using this is:

 mount -t debugfs none /sys/kernel/debug
 echo cstate > /sys/kernel/debug/tracing/current_tracer
 echo 1 > /sys/kernel/debug/tracing/tracing_enabled
 sleep 1
 echo 0 > /sys/kernel/debug/tracing/tracing_enabled
 cat /sys/kernel/debug/tracing/trace | perl scripts/trace/cstate.pl > out.svg
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

This patch changes the name of the "return function tracer" into
function-graph-tracer which is a more suitable name for a tracing
which makes one able to retrieve the ordered call stack during
the code flow.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: add new ftrace plugin

A prototype for a BTS ftrace plug-in.

The tracer collects branch trace in a cyclic buffer for each cpu.

The tracer is not configurable and the trace for each snapshot is
appended when doing cat /debug/tracing/trace.

This is a proof of concept that will be extended with future patches
to become a (hopefully) useful tool.
Signed-off-by: NMarkus Metzger <markus.t.metzger@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

User stack tracing is just implemented for x86, but it is not x86 specific.

Introduce a generic config flag, that is currently enabled only for x86.
When other arches implement it, they will have to
SELECT USER_STACKTRACE_SUPPORT.
Signed-off-by: NTörök Edwin <edwintorok@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: feature to profile if statements

This patch adds a branch profiler for all if () statements.
The results will be found in:

  /debugfs/tracing/profile_branch

For example:

   miss      hit    %        Function                  File              Line
 ------- ---------  -        --------                  ----              ----
       0        1 100 x86_64_start_reservations      head64.c             127
       0        1 100 copy_bootdata                  head64.c             69
       1        0   0 x86_64_start_kernel            head64.c             111
      32        0   0 set_intr_gate                  desc.h               319
       1        0   0 reserve_ebda_region            head.c               51
       1        0   0 reserve_ebda_region            head.c               47
       0        1 100 reserve_ebda_region            head.c               42
       0        0   X maxcpus                        main.c               165

Miss means the branch was not taken. Hit means the branch was taken.
The percent is the percentage the branch was taken.

This adds a significant amount of overhead and should only be used
by those analyzing their system.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: clean up to make one profiler of like and unlikely tracer

The likely and unlikely profiler prints out the file and line numbers
of the annotated branches that it is profiling. It shows the number
of times it was correct or incorrect in its guess. Having two
different files or sections for that matter to tell us if it was a
likely or unlikely is pretty pointless. We really only care if
it was correct or not.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch adds the support for dynamic tracing on the function return tracer.
The whole difference with normal dynamic function tracing is that we don't need
to hook on a particular callback. The only pro that we want is to nop or set
dynamically the calls to ftrace_caller (which is ftrace_return_caller here).

Some security checks ensure that we are not trying to launch dynamic tracing for
return tracing while normal function tracing is already running.

An example of trace with getnstimeofday set as a filter:

ktime_get_ts+0x22/0x50 -> getnstimeofday (2283 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1396 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1382 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1825 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1426 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1464 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1524 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1382 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1382 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1434 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1464 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1502 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1404 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1397 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1051 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1314 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1344 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1163 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1390 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1374 ns)
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: name change of unlikely tracer and profiler

Ingo Molnar suggested changing the config from UNLIKELY_PROFILE
to BRANCH_PROFILING. I never did like the "unlikely" name so I
went one step farther, and renamed all the unlikely configurations
to a "BRANCH" variant.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: new likely/unlikely branch tracer

This patch adds a way to record the instances of the likely() and unlikely()
branch condition annotations.

When "unlikely" is set in /debugfs/tracing/iter_ctrl the unlikely conditions
will be added to any of the ftrace tracers. The change takes effect when
a new tracer is passed into the current_tracer file.

For example:

 bash-3471  [003]   357.014755: [INCORRECT] sched_info_dequeued:sched_stats.h:177
 bash-3471  [003]   357.014756: [correct] update_curr:sched_fair.c:489
 bash-3471  [003]   357.014758: [correct] calc_delta_fair:sched_fair.c:411
 bash-3471  [003]   357.014759: [correct] account_group_exec_runtime:sched_stats.h:356
 bash-3471  [003]   357.014761: [correct] update_curr:sched_fair.c:489
 bash-3471  [003]   357.014763: [INCORRECT] calc_delta_fair:sched_fair.c:411
 bash-3471  [003]   357.014765: [correct] calc_delta_mine:sched.c:1279

Which shows the normal tracer heading, as well as whether the condition was
correct "[correct]" or was mistaken "[INCORRECT]", followed by the function,
file name and line number.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: new unlikely/likely profiler

Andrew Morton recently suggested having an in-kernel way to profile
likely and unlikely macros. This patch achieves that goal.

When configured, every(*) likely and unlikely macro gets a counter attached
to it. When the condition is hit, the hit and misses of that condition
are recorded. These numbers can later be retrieved by:

  /debugfs/tracing/profile_likely    - All likely markers
  /debugfs/tracing/profile_unlikely  - All unlikely markers.

# cat /debug/tracing/profile_unlikely | head
 correct incorrect  %        Function                  File              Line
 ------- ---------  -        --------                  ----              ----
    2167        0   0 do_arch_prctl                  process_64.c         832
       0        0   0 do_arch_prctl                  process_64.c         804
    2670        0   0 IS_ERR                         err.h                34
   71230     5693   7 __switch_to                    process_64.c         673
   76919        0   0 __switch_to                    process_64.c         639
   43184    33743  43 __switch_to                    process_64.c         624
   12740    64181  83 __switch_to                    process_64.c         594
   12740    64174  83 __switch_to                    process_64.c         590

# cat /debug/tracing/profile_unlikely | \
  awk '{ if ($3 > 25) print $0; }' |head -20
   44963    35259  43 __switch_to                    process_64.c         624
   12762    67454  84 __switch_to                    process_64.c         594
   12762    67447  84 __switch_to                    process_64.c         590
    1478      595  28 syscall_get_error              syscall.h            51
       0     2821 100 syscall_trace_leave            ptrace.c             1567
       0        1 100 native_smp_prepare_cpus        smpboot.c            1237
   86338   265881  75 calc_delta_fair                sched_fair.c         408
  210410   108540  34 calc_delta_mine                sched.c              1267
       0    54550 100 sched_info_queued              sched_stats.h        222
   51899    66435  56 pick_next_task_fair            sched_fair.c         1422
       6       10  62 yield_task_fair                sched_fair.c         982
    7325     2692  26 rt_policy                      sched.c              144
       0     1270 100 pre_schedule_rt                sched_rt.c           1261
    1268    48073  97 pick_next_task_rt              sched_rt.c           884
       0    45181 100 sched_info_dequeued            sched_stats.h        177
       0       15 100 sched_move_task                sched.c              8700
       0       15 100 sched_move_task                sched.c              8690
   53167    33217  38 schedule                       sched.c              4457
       0    80208 100 sched_info_switch              sched_stats.h        270
   30585    49631  61 context_switch                 sched.c              2619

# cat /debug/tracing/profile_likely | awk '{ if ($3 > 25) print $0; }'
   39900    36577  47 pick_next_task                 sched.c              4397
   20824    15233  42 switch_mm                      mmu_context_64.h     18
       0        7 100 __cancel_work_timer            workqueue.c          560
     617    66484  99 clocksource_adjust             timekeeping.c        456
       0   346340 100 audit_syscall_exit             auditsc.c            1570
      38   347350  99 audit_get_context              auditsc.c            732
       0   345244 100 audit_syscall_entry            auditsc.c            1541
      38     1017  96 audit_free                     auditsc.c            1446
       0     1090 100 audit_alloc                    auditsc.c            862
    2618     1090  29 audit_alloc                    auditsc.c            858
       0        6 100 move_masked_irq                migration.c          9
       1      198  99 probe_sched_wakeup             trace_sched_switch.c 58
       2        2  50 probe_wakeup                   trace_sched_wakeup.c 227
       0        2 100 probe_wakeup_sched_switch      trace_sched_wakeup.c 144
    4514     2090  31 __grab_cache_page              filemap.c            2149
   12882   228786  94 mapping_unevictable            pagemap.h            50
       4       11  73 __flush_cpu_slab               slub.c               1466
  627757   330451  34 slab_free                      slub.c               1731
    2959    61245  95 dentry_lru_del_init            dcache.c             153
     946     1217  56 load_elf_binary                binfmt_elf.c         904
     102       82  44 disk_put_part                  genhd.h              206
       1        1  50 dst_gc_task                    dst.c                82
       0       19 100 tcp_mss_split_point            tcp_output.c         1126

As you can see by the above, there's a bit of work to do in rethinking
the use of some unlikelys and likelys. Note: the unlikely case had 71 hits
that were more than 25%.

Note:  After submitting my first version of this patch, Andrew Morton
  showed me a version written by Daniel Walker, where I picked up
  the following ideas from:

  1)  Using __builtin_constant_p to avoid profiling fixed values.
  2)  Using __FILE__ instead of instruction pointers.
  3)  Using the preprocessor to stop all profiling of likely
       annotations from vsyscall_64.c.

Thanks to Andrew Morton, Arjan van de Ven, Theodore Tso and Ingo Molnar
for their feed back on this patch.

(*) Not ever unlikely is recorded, those that are used by vsyscalls
 (a few of them) had to have profiling disabled.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Theodore Tso <tytso@mit.edu>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: add new tracing plugin which can trace full (entry+exit) function calls

This tracer uses the low level function return ftrace plugin to
measure the execution time of the kernel functions.

The first field is the caller of the function, the second is the
measured function, and the last one is the execution time in
nanoseconds.

- v3:

- HAVE_FUNCTION_RET_TRACER have been added. Each arch that support ftrace return
  should enable it.
- ftrace_return_stub becomes ftrace_stub.
- CONFIG_FUNCTION_RET_TRACER depends now on CONFIG_FUNCTION_TRACER
- Return traces printing can be used for other tracers on trace.c
- Adapt to the new tracing API (no more ctrl_update callback)
- Correct the check of "disabled" during insertion.
- Minor changes...
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: quick start and stop of function tracer

This patch adds a way to disable the function tracer quickly without
the need to run kstop_machine. It adds a new variable called
function_trace_stop which will stop the calls to functions from mcount
when set.  This is just an on/off switch and does not handle recursion
like preempt_disable().

It's main purpose is to help other tracers/debuggers start and stop tracing
fuctions without the need to call kstop_machine.

The config option HAVE_FUNCTION_TRACE_MCOUNT_TEST is added for archs
that implement the testing of the function_trace_stop in the mcount
arch dependent code. Otherwise, the test is done in the C code.

x86 is the only arch at the moment that supports this.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: build fix on !stacktrace architectures

only select STACKTRACE on architectures that have STACKTRACE_SUPPORT

... since we also need to ifdef out the guts of ftrace_trace_stack().
We also want to disallow setting TRACE_ITER_STACKTRACE in trace_flags
on such configs, but that can wait.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: build fix on non-function-tracing architectures

The trace_nop is the tracer that is defined when no tracer is set in
the ftrace infrastructure.

The trace_nop was mistakenly selected by HAVE_FTRACE due to the confusion
between ftrace infrastructure and the ftrace function tracer (which has
been solved by renaming the function tracer).

This patch changes the select to the approriate TRACING.

This patch should fix compile errors on architectures that do not define
the FUNCTION_TRACER.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: build fix

If the boot tracer is selected but not the sched_switch,
there will be a build failure:

 kernel/built-in.o: In function `boot_trace_init':
 trace_boot.c:(.text+0x5ee38): undefined reference to `sched_switch_trace'
 kernel/built-in.o: In function `disable_boot_trace':
 (.text+0x5eee1): undefined reference to `tracing_stop_cmdline_record'
 kernel/built-in.o: In function `enable_boot_trace':
 (.text+0x5ef11): undefined reference to `tracing_start_cmdline_record'

This patch fixes it.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We seem to have plenty tracers, lets create a menu and not clutter
the already cluttered debug menu more.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NFrédéric Weisbecker <fweisbec@gmail.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Due to confusion between the ftrace infrastructure and the gcc profiling
tracer "ftrace", this patch renames the config options from FTRACE to
FUNCTION_TRACER.  The other two names that are offspring from FTRACE
DYNAMIC_FTRACE and FTRACE_MCOUNT_RECORD will stay the same.

This patch was generated mostly by script, and partially by hand.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

A lot of tracers have HAVE_FTRACE as a dependent config where it
really should not. The HAVE_FTRACE is a misnomer (soon to be fixed)
and describes if the architecture has the function tracer (mcount)
implemented. The ftrace infrastructure is implemented in all archs.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Improve the help text of the boot tracer.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Improve the help text that is displayed for CONFIG_STACK_TRACER.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This is a unified tracing buffer that implements a ring buffer that
hopefully everyone will eventually be able to use.

The events recorded into the buffer have the following structure:

  struct ring_buffer_event {
	u32 type:2, len:3, time_delta:27;
	u32 array[];
  };

The minimum size of an event is 8 bytes. All events are 4 byte
aligned inside the buffer.

There are 4 types (all internal use for the ring buffer, only
the data type is exported to the interface users).

 RINGBUF_TYPE_PADDING: this type is used to note extra space at the end
	of a buffer page.

 RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events
	is greater than the 27 bit delta can hold. We add another
	32 bits, and record that in its own event (8 byte size).

 RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to
	help keep the buffer timestamps in sync.

RINGBUF_TYPE_DATA: The event actually holds user data.

The "len" field is only three bits. Since the data must be
4 byte aligned, this field is shifted left by 2, giving a
max length of 28 bytes. If the data load is greater than 28
bytes, the first array field holds the full length of the
data load and the len field is set to zero.

Example, data size of 7 bytes:

	type = RINGBUF_TYPE_DATA
	len = 2
	time_delta: <time-stamp> - <prev_event-time-stamp>
	array[0..1]: <7 bytes of data> <1 byte empty>

This event is saved in 12 bytes of the buffer.

An event with 82 bytes of data:

	type = RINGBUF_TYPE_DATA
	len = 0
	time_delta: <time-stamp> - <prev_event-time-stamp>
	array[0]: 84 (Note the alignment)
	array[1..14]: <82 bytes of data> <2 bytes empty>

The above event is saved in 92 bytes (if my math is correct).
82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length.

Do not reference the above event struct directly. Use the following
functions to gain access to the event table, since the
ring_buffer_event structure may change in the future.

ring_buffer_event_length(event): get the length of the event.
	This is the size of the memory used to record this
	event, and not the size of the data pay load.

ring_buffer_time_delta(event): get the time delta of the event
	This returns the delta time stamp since the last event.
	Note: Even though this is in the header, there should
		be no reason to access this directly, accept
		for debugging.

ring_buffer_event_data(event): get the data from the event
	This is the function to use to get the actual data
	from the event. Note, it is only a pointer to the
	data inside the buffer. This data must be copied to
	another location otherwise you risk it being written
	over in the buffer.

ring_buffer_lock: A way to lock the entire buffer.
ring_buffer_unlock: unlock the buffer.

ring_buffer_alloc: create a new ring buffer. Can choose between
	overwrite or consumer/producer mode. Overwrite will
	overwrite old data, where as consumer producer will
	throw away new data if the consumer catches up with the
	producer.  The consumer/producer is the default.

ring_buffer_free: free the ring buffer.

ring_buffer_resize: resize the buffer. Changes the size of each cpu
	buffer. Note, it is up to the caller to provide that
	the buffer is not being used while this is happening.
	This requirement may go away but do not count on it.

ring_buffer_lock_reserve: locks the ring buffer and allocates an
	entry on the buffer to write to.
ring_buffer_unlock_commit: unlocks the ring buffer and commits it to
	the buffer.

ring_buffer_write: writes some data into the ring buffer.

ring_buffer_peek: Look at a next item in the cpu buffer.
ring_buffer_consume: get the next item in the cpu buffer and
	consume it. That is, this function increments the head
	pointer.

ring_buffer_read_start: Start an iterator of a cpu buffer.
	For now, this disables the cpu buffer, until you issue
	a finish. This is just because we do not want the iterator
	to be overwritten. This restriction may change in the future.
	But note, this is used for static reading of a buffer which
	is usually done "after" a trace. Live readings would want
	to use the ring_buffer_consume above, which will not
	disable the ring buffer.

ring_buffer_read_finish: Finishes the read iterator and reenables
	the ring buffer.

ring_buffer_iter_peek: Look at the next item in the cpu iterator.
ring_buffer_read: Read the iterator and increment it.
ring_buffer_iter_reset: Reset the iterator to point to the beginning
	of the cpu buffer.
ring_buffer_iter_empty: Returns true if the iterator is at the end
	of the cpu buffer.

ring_buffer_size: returns the size in bytes of each cpu buffer.
	Note, the real size is this times the number of CPUs.

ring_buffer_reset_cpu: Sets the cpu buffer to empty
ring_buffer_reset: sets all cpu buffers to empty

ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a
	cpu buffer of another buffer. This is handy when you
	want to take a snap shot of a running trace on just one
	cpu. Having a backup buffer, to swap with facilitates this.
	Ftrace max latencies use this.

ring_buffer_empty: Returns true if the ring buffer is empty.
ring_buffer_empty_cpu: Returns true if the cpu buffer is empty.

ring_buffer_record_disable: disable all cpu buffers (read only)
ring_buffer_record_disable_cpu: disable a single cpu buffer (read only)
ring_buffer_record_enable: enable all cpu buffers.
ring_buffer_record_enabl_cpu: enable a single cpu buffer.

ring_buffer_entries: The number of entries in a ring buffer.
ring_buffer_overruns: The number of entries removed due to writing wrap.

ring_buffer_time_stamp: Get the time stamp used by the ring buffer
ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp
	into nanosecs.

I still need to implement the GTOD feature. But we need support from
the cpu frequency infrastructure.  But this can be done at a later
time without affecting the ring buffer interface.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The tracing engine resets the ring buffer and the tracers touch it
too during self-tests. These self-tests happen during tracers registering
and work against boot tracing which is logging initcalls.

We have to disable tracing self-tests if the boot-tracer is selected.
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Bring the entry to choose the boot tracer on the kernel config.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>