When we fork, init_new_context() improperly resets the vdso_base
of the new context to 0.  That means that the new process loses
access to the vdso for signal trampolines.

The initialization should be unnecessary anyway as the context
on a fresh mm should be 0 in the first place and binfmt_elf
will initialize that value for a newly loaded process.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (33 commits)
  Blackfin arch: hook up some missing new system calls
  Blackfin arch: fix missing digit in SCLK range checking
  Blackfin arch: do not muck with the UART during boot -- let the serial driver worry about it
  Blackfin arch: clear EMAC_SYSTAT during IRQ init rather than early head.S as we dont need it setup that early
  Blackfin arch: use %pF when printing out the double fault address so we get symbol names
  Blackfin arch: add support for the BlackStamp board
  Blackfin arch: Allow ins functions to have a low latency version
  Blackfin arch: Print out doublefault addresses, so debug can occur
  Blackfin arch: shuffle related prototypes together -- no functional changes
  Blackfin arch: move fixed code defines into fixed_code.h as very few things actually need to know these details
  Blackfin arch: mark some functions as __init as they are only called from __init functions
  Blackfin arch: delete dead prototypes
  Blackfin arch: cleanup cache lock code
  Blackfin arch: workaround SIC_IWR1 reset bug, by keeping MDMA0/1 always enabled in SIC_IWR1.
  Blackfin arch: Fix bug - when expanding the trace buffer, it does not print out the decoded instruction.
  Blackfin arch: Fix Bug - System with EMAC driver enabled - Core not idling
  Blackfin arch: delete unused cache functions
  Blackfin arch: convert L2 defines to be the same as the L1 defines
  Blackfin arch: unify the duplicated portions of __start and split mach-specific pieces into _mach_early_start where they will be easier to trim over time
  Blackfin arch: add asm/thread_info.h for THREAD_SIZE define
  ...

* 'release-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-acpi-2.6:
  cpuidle: Make ladder governor honor latency requirements fully
  cpuidle: Menu governor fix wrong usage of measured_us
  cpuidle: Do not use poll_idle unless user asks for it
  x86: Fix ioremap off by one BUG

ladder governor only honored latency requirement when promoting C-states.
Instead. it should check for latency requirement on each idle call,
and demote to appropriate C-state when there is a latency requirement change.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NAndi Kleen <ak@linux.intel.com>

There is a bug in menu governor where we have
		if (data->elapsed_us < data->elapsed_us + measured_us)

with measured_us already having elapsed_us added in tickless case here
	unsigned int measured_us =
		cpuidle_get_last_residency(dev) + data->elapsed_us;

Also, it should be last_residency, not measured_us, that need to be used to
do comparing and distinguish between expected & non-expected events.

Refactor menu_reflect() to fix these two problems.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NWei Gang <gang.wei@intel.com>
Signed-off-by: NAndi Kleen <ak@linux.intel.com>

poll_idle was added to CPUIDLE, just as a low latency idle handler, to be
used in cases when user desires CPUs not to enter any idle state at all. It
was supposed to be a run time idle=poll option to the user. But, it was indeed
getting used during normal menu and ladder governor default case, with no
special user setting (Reported by Linus Torvalds).

Change below ensures that poll_idle will not be used unless user explicitly
asks pm_qos infrastructure for zero latency requirement.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NAndi Kleen <ak@linux.intel.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: wm8990: Implement speaker volume PGA
  ALSA: wm8990: Fix routing of left DAC to speaker mixer
  ALSA: virtuoso: add Xonar D1 support

Not all AMD K8 have 6 VID pins, contrary to what was assumed in
commit 116d0486. This commit broke
support of older CPU models which have only 5 VID pins:
http://bugzilla.kernel.org/show_bug.cgi?id=11329

We need two entries in the hwmon-vid table, one for 5-bit VID models
(K8 revision <= E) and one for 6-bit VID models (K8 revision >= F).
This fixes bug #11329.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NFrank Myhr <fmyhr@fhmtech.com>
Tested-by: NJean-Luc Coulon <jean.luc.coulon@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

as per this discussion:

   http://lkml.org/lkml/2008/8/12/423

Pardo reported that 64-bit threaded apps, if their stacks exceed the
combined size of ~4GB, slow down drastically in pthread_create() - because
glibc uses MAP_32BIT to allocate the stacks. The use of MAP_32BIT is
a legacy hack - to speed up context switching on certain early model
64-bit P4 CPUs.

So introduce a new flag to be used by glibc instead, to not constrain
64-bit apps like this.

glibc can switch to this new flag straight away - it will be ignored
by the kernel. If those old CPUs ever matter to anyone, support for
it can be implemented.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NUlrich Drepper <drepper@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] mount of IPC$ breaks with iget patch
  [CIFS] remove trailing whitespace
  [CIFS] if get root inode fails during mount, cleanup tree connection

This moves it to being a tty operation. That removes special cases and now
also means that resize can be picked up by um and other non vt consoles
which may have a resize operation.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'linux-next' of git://git.infradead.org/~dedekind/ubifs-2.6: (29 commits)
  UBIFS: xattr bugfixes
  UBIFS: remove unneeded check
  UBIFS: few commentary fixes
  UBIFS: fix budgeting request alignment in xattr code
  UBIFS: improve arguments checking in debugging messages
  UBIFS: always set i_generation to 0
  UBIFS: correct spelling of "thrice".
  UBIFS: support splice_write
  UBIFS: minor tweaks in commit
  UBIFS: reserve more space for index
  UBIFS: print pid in dump function
  UBIFS: align inode data to eight
  UBIFS: improve budgeting checks
  UBIFS: correct orphan deletion order
  UBIFS: fix typos in comments
  UBIFS: do not union creat_sqnum and del_cmtno
  UBIFS: optimize deletions
  UBIFS: increment commit number earlier
  UBIFS: remove another unneeded function parameter
  UBIFS: remove unneeded function parameter
  ...

* 'for-linus' of git://neil.brown.name/md:
  md: cancel check/repair requests when recovery is needed
  Allow raid10 resync to happening in larger chunks.
  Allow faulty devices to be removed from a readonly array.
  Don't let a blocked_rdev interfere with read request in raid5/6
  Fail safely when trying to grow an array with a write-intent bitmap.
  Restore force switch of md array to readonly at reboot time.
  Make writes to md/safe_mode_delay immediately effective.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: xilinx_ps2 - fix warning
  Input: bcm5974 - implement autosuspend support
  Input: bcm5974 - add driver for Macbook Air and Pro Penryn touchpads
  Input: paper over a bug in Synaptics X driver
  Input: evdev - split EVIOCGBIT handlig into a separate function
  Input: i8042 - Add Dritek quirk for Acer TravelMate 4280
  Input: xpad - add Pelican Eclipse D-Pad to the list of devices
  Input: gpio-keys - make gpio_keys_device_driver static
  Input: gpio-keys - fix possible NULL pointer dereference
  Input: wm97xx - enable sub-drivers by default

* 'release-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-acpi-2.6:
  ACPI: Fix thermal shutdowns
  ACPI: bounds check IRQ to prevent memory corruption
  ACPI: Avoid bogus EC timeout when EC is in Polling mode
  ACPI : Add the EC dmi table to fix the incorrect ECDT table
  ACPI: Properly clear flags on false-positives and send uevent on sudden unplug
  acpi: trivial cleanups
  acer-wmi: Fix wireless and bluetooth on early AMW0 v2 laptops
  ACPI: WMI: Set instance for query block calls
  ACPICA: Additional error checking for pathname utilities
  ACPICA: Fix possible memory leak in Unload() operator
  ACPICA: Fix memory leak when deleting thermal/processor objects

Sam Ravnborg did the build-test that the direct header file move works,
I'm just committing it.

This is a pure move:

	mkdir arch/alpha/include
	git mv include/asm-alpha arch/alpha/include/asm

with no other changes.
Requested-and-tested-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Jean Delvare's machine triggered this BUG

acpi_os_map_memory phys ffff0000 size 65535
------------[ cut here ]------------
kernel BUG at arch/x86/mm/pat.c:233!

with ACPI in the backtrace.

Adding some debugging output showed that ACPI calls

acpi_os_map_memory phys ffff0000 size 65535

And ioremap/PAT does this check in 32bit, so addr+size wraps and the BUG
in reserve_memtype() triggers incorrectly.

        BUG_ON(start >= end); /* end is exclusive */

But reserve_memtype already uses u64:

int reserve_memtype(u64 start, u64 end,

so the 32bit truncation must happen in the caller. Presumably in ioremap
when it passes this information to reserve_memtype().

This patch does this computation in 64bit.

http://bugzilla.kernel.org/show_bug.cgi?id=11346Signed-off-by: NAndi Kleen <ak@linux.intel.com>

The latest revisions of the WM8990 provide a programmable gain amplifier
for the speaker - configure the register cache and implement controls
for this. Older revisions of the device ignore writes to these controls.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

A fuzzed fileystem image failed with OMFS when the extent count was
used in a loop without being checked against the max number of extents.
It also provoked a signed division for an array index that was checked
as if unsigned, leading to index by -1.

omfsck will be updated to fix these cases, in the meantime bail out
gracefully.
Reported-by: NEric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: NBob Copeland <me@bobcopeland.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Testing with a modified fsfuzzer reveals a couple of locations in omfs
where filesystem variables are ultimately used as loop counters with
insufficient sanity checking.  In this case, dir->i_size is used to
compute the number of buckets in the directory hash.  If too large,
readdir will overrun a buffer.

Since it's an invariant that dir->i_size is equal to the sysblock
size, and we already sanity check that, just use that value instead.
This fixes the following oops:

BUG: unable to handle kernel paging request at c978e004
IP: [<c032298e>] omfs_readdir+0x18e/0x32f
Oops: 0000 [#1] PREEMPT DEBUG_PAGEALLOC
Modules linked in:

Pid: 4796, comm: ls Not tainted (2.6.27-rc2 #12)
EIP: 0060:[<c032298e>] EFLAGS: 00010287 CPU: 0
EIP is at omfs_readdir+0x18e/0x32f
EAX: c978d000 EBX: 00000000 ECX: cbfcfaf8 EDX: cb2cf100
ESI: 00001000 EDI: 00000800 EBP: cb2d3f68 ESP: cb2d3f0c
 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
Process ls (pid: 4796, ti=cb2d3000 task=cb175f40 task.ti=cb2d3000)
Stack: 00000002 00000000 00000000 c018a820 cb2d3f94 cb2cf100 cbfb0000 ffffff10
       cbfb3b80 cbfcfaf8 000001c9 00000a09 00000000 00000000 00000000 cbfcfbc8
       c9697000 cbfb3b80 22222222 00001000 c08e6cd0 cb2cf100 cbfb3b80 cb2d3f88
Call Trace:
 [<c018a820>] ? filldir64+0x0/0xcd
 [<c018a9f2>] ? vfs_readdir+0x56/0x82
 [<c018a820>] ? filldir64+0x0/0xcd
 [<c018aa7c>] ? sys_getdents64+0x5e/0xa0
 [<c01038bd>] ? sysenter_do_call+0x12/0x31
 =======================
Code: 00 89 f0 89 f3 0f ac f8 14 81 e3 ff ff 0f 00 48 8d
14 c5 b8 01 00 00 89 45 cc 89 55 f0 e9 8c 01 00 00 8b 4d c8 8b 75 f0 8b
41 18 <8b> 54 30 04 8b 04 30 31 f6 89 5d dc 89 d1 8b 55 b8 0f c8 0f c9
Reported-by: NEric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: NBob Copeland <me@bobcopeland.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

m68k fails to build with these functions inlined in completion.h.  Move
them out of line into sched.c and export them to avoid this problem.
Signed-off-by: NDave Chinner <david@fromorbit.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When reviewing a recent patch I noticed a potential trouble spot in the
registration of new SPI devices.  The SPI master driver is told to set
the device up before adding it to the driver model, so that it's always
properly set up when probe() is called.  (This is important, because in
the case of inverted chipselects, this device can make the bus misbehave
until it's properly deselected.  It's got to be set up even if no driver
binds to the device.)

The trouble spot is that it doesn't first verify that no other device
has been added using that chipselect.  If such a device has been added,
its configuration gets trashed.  (Fortunately this has not been a common
error!)

The fix here adds an explicit check, and a mutex to protect the relevant
critical region.

[akpm@linux-foundation.org: make the lock local to spi_add_device()]
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

write_cache_pages() uses i_mapping->writeback_index to pick up where it
left off the last time a given inode was found by pdflush or
balance_dirty_pages (or anyone else who sets wbc->range_cyclic)

alloc_inode() should set it to a sane value so that writeback doesn't
start in the middle of a file.  It is somewhat difficult to notice the bug
since write_cache_pages will loop around to the start of the file and the
elevator helps hide the resulting seeks.

For whatever reason, Btrfs hits this often.  Unpatched, untarring 30
copies of the linux kernel in series runs at 47MB/s on a single sata
drive.  With this fix, it jumps to 62MB/s.
Signed-off-by: NChris Mason <chris.mason@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add MAINTAINERS for GRU, XPNET, XPC and XP drivers.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add in the CPUID for Nehalem chips.
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Cc: Kent Liu <kent.liu@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, all sensors are read when the energy meter is queried via
sysfs.  This introduces a considerable amount of delay and variation in
the sysfs reading, which is not desirable when trying to profile energy
use.  Therefore, read only the energy meters when a sysfs query comes in
for them, and don't cache the results so that we always get the latest
reading.
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On older machines, probing for a nonexistent AEM interface returned an
IPMI error; when we saw this, we'd stop probing.  On the x3650 M2 and
(presumably) later, we are returned a value indicating success and a
buffer full of garbage or zeroes.  This causes the probe function to run
in an infinite loop.  To fix this, we add one last check--if the
interface number we're looking for is higher than the number of
interfaces that AEM claims to have, stop probing.
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Minor documentation update to reflect the current full name of the power
management hardware interface and reflows the text a bit.
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Previously the driver was only using DMI to prevent smbus probing on
non-Abit motherboards.  However, since the manual probing method is
brittle and prone to failure on some Abit motherboards (esp.  the Abit
IP35 Pro) it is better to use DMI to also read the board name and then
decide whether or not to probe the bus.

At the moment, we do not have a list of valid DMI name strings to use
for existing and supported motherboards.  This patch only implements DMI
probing for the IP35 Pro.  For motherboards that can not yet use DMI
probing, a warning will be printed to the kernel log asking those users
to email me their dmidecode output.

The existing manual probing mechanism will be used if CONFIG_DMI is not
enabled, if DMI probing fails (for DMI-unsupported motherboards), or if
DMI probing fails and the "force" option is set (for DMI-supported
motherboards).  Ideally in the longer term this manual probing method
would be removed.

This patch should be safe to apply as it does not change the probing
behaviour for most of the supported motherboards, just the IP35 Pro,
which already has regressions filed against it in 2.6.26.

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=11212Signed-off-by: NAlistair John Strachan <alistair@devzero.co.uk>
Acked-by: NHans de Goede <j.w.r.degoede@hhs.nl>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Hans passed maintainership of the abituguru3 hwmon driver onto me.  Add
a new entry to the MAINTAINERS file for the abituguru3 driver and assign
it to me.  Also update the existing UGURU entry to indicate that Hans is
only responsible for the abituguru driver.
Signed-off-by: NAlistair John Strachan <alistair@devzero.co.uk>
Acked-by: NHans de Goede <j.w.r.degoede@hhs.nl>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Export the sensor -> channel/dimm mapping in tempX_label.
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

SPI driver for analog to digital converters national semiconductor
ADC081S101, ADC124S501, ...

Code for 8 channels by Tobias Himmer.

This driver adds support for National Semiconductor ADC<bb><c>S<sss> chip
family, where:

 * bb  is the resolution in number of bits (8, 10, 12)
 * c   is the number of channels (1, 2, 4, 8)
 * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
   kSPS and 101 for 1 MSPS)

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NMarc Pignat <marc.pignat@hevs.ch>
Cc: Tobias Himmer <tobias@himmer-online.de>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

drivers/hwmon/w83791d.c: In function `w83791d_probe':
drivers/hwmon/w83791d.c:1049: warning: unused variable `val1'
Signed-off-by: NMichael Borisov <niro@tut.by>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add support for Macbook v3 (sensors and accelerometer).
Signed-off-by: NNicolas Boichat <nicolas@boichat.ch>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This adds support for fans and temperature sensors on intel iMac.

Tested on iMac 24" 2.8ghz (iMac8,1), it supports the following sensors:

cpu A
ambient
gpu
gpu diode
gpu heatsink
hd bay 1
memory controller
optical drive
power
Signed-off-by: NRoberto De Ioris <roberto@unbit.it>
Cc: Nicolas Boichat <nicolas@boichat.ch>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

AOI position cannot be negative.
Signed-off-by: NYork Sun <yorksun@freescale.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Application can now have the virtual resoltuion and use FBIOPAN_DISPLAY
ioctl to pan.
Signed-off-by: NYork Sun <yorksun@freescale.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>