Skip to content

L
linux

xiphi1978 / linux

通知 2
Star 0
Fork 0
L
linux

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 16 12月, 2015 1 次提交
    • C
      Input: elan_i2c - set input device's vendor and product IDs · 3eab4588
      由 Charlie Mooney 提交于 
      Previously the "vendor" and "product" IDs for the elan_i2c driver simply
reported 0000.  This patch modifies the elan_i2c driver to include the
Elan vendor ID and the touchpad's product id under
input/input*/{vendor,product}.

Specifically, this is to allow us to apply a generic Elan gestures config
that will apply to all Elan touchpads on ChromeOS.  These configs  match to
input devices in various ways, but one major way is by matching on vendor
ID.  Adding this patch allows the default Elan touchpad config to be
applied to Elan touchpads in this kernel by matching on devices that have
vendor ID 04f3.

Note that product ID is also available via custom sysfs entry "product_id"
as well.
Signed-off-by: NCharlie Mooney <charliemooney@chromium.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
      3eab4588
  3. 13 12月, 2015 1 次提交
  5. 12 12月, 2015 1 次提交
    • J
      Input: atmel_mxt_ts - add maxtouch to I2C table for module autoload · b7d21058
      由 Javier Martinez Canillas 提交于 
      The Atmel maxtouch DT binding documents that the compatible string for
the device is "atmel,maxtouch" and the I2C core always reports a module
alias of the form i2c:alias where alias is the compatible string model:

$ grep MODALIAS /sys/devices/platform/12e00000.i2c/i2c-8/8-004b/uevent
MODALIAS=i2c:maxtouch

But there isn't maxtouch entry in the I2C device ID table so when the
i2c:maxtouch MODALIAS uevent is reported, kmod is not able to match the
alias with a module to load:

$ modinfo atmel_mxt_ts | grep alias
alias:          of:N*T*Catmel,maxtouch
alias:          i2c:mXT224
alias:          i2c:atmel_mxt_tp
alias:          i2c:atmel_mxt_ts
alias:          i2c:qt602240_ts

So add the maxtouch entry to the I2C device ID table to allow the module
to be autoloaded when the device is registered via OF.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
      b7d21058
  7. 03 12月, 2015 3 次提交
  9. 18 11月, 2015 5 次提交
  11. 14 11月, 2015 1 次提交
  13. 10 11月, 2015 1 次提交
  15. 07 11月, 2015 1 次提交
  17. 06 11月, 2015 2 次提交
  19. 04 11月, 2015 4 次提交
  21. 01 11月, 2015 1 次提交
  23. 28 10月, 2015 1 次提交
    • S
      Input: add userio module · 5523662e
      由 Stephen Chandler Paul 提交于 
      Debugging input devices, specifically laptop touchpads, can be tricky
without having the physical device handy. Here we try to remedy that
with userio. This module allows an application to connect to a character
device provided by the kernel, and emulate any serio device. In
combination with userspace programs that can record PS/2 devices and
replay them through the /dev/userio device, this allows developers to
debug driver issues on the PS/2 level with devices simply by requesting
a recording from the user experiencing the issue without having to have
the physical hardware in front of them.
Signed-off-by: NStephen Chandler Paul <cpaul@redhat.com>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
      5523662e
  25. 27 10月, 2015 3 次提交
    • D
      Input: evdev - add event-mask API · 06a16293
      由 David Herrmann 提交于 
      Hardware manufacturers group keys in the weirdest way possible. This may
cause a power-key to be grouped together with normal keyboard keys and
thus be reported on the same kernel interface.

However, user-space is often only interested in specific sets of events.
For instance, daemons dealing with system-reboot (like systemd-logind)
listen for KEY_POWER, but are not interested in any main keyboard keys.
Usually, power keys are reported via separate interfaces, however,
some i8042 boards report it in the AT matrix. To avoid waking up those
system daemons on each key-press, we had two ideas:
 - split off KEY_POWER into a separate interface unconditionally
 - allow filtering a specific set of events on evdev FDs

Splitting of KEY_POWER is a rather weird way to deal with this and may
break backwards-compatibility. It is also specific to KEY_POWER and might
be required for other stuff, too. Moreover, we might end up with a huge
set of input-devices just to have them properly split.

Hence, this patchset implements the second idea: An event-mask to specify
which events you're interested in. Two ioctls allow setting this mask for
each event-type. If not set, all events are reported. The type==0 entry is
used same as in EVIOCGBIT to set the actual EV_* mask of filtered events.
This way, you have a two-level filter.

We are heavily forward-compatible to new event-types and event-codes. So
new user-space will be able to run on an old kernel which doesn't know the
given event-codes or event-types.
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
      06a16293
    • J
      Input: snvs_pwrkey - remove duplicated semicolon · 9ace41ad
      由 Javier Martinez Canillas 提交于 
      Remove the unneded semicolon since it is clearly a typo error.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
      9ace41ad
    • H
      Input: alps - only the Dell Latitude D420/430/620/630 have separate stick button bits · 19556219
      由 Hans de Goede 提交于 
      commit 92bac83d ("Input: alps - non interleaved V2 dualpoint has
separate stick button bits") assumes that all alps v2 non-interleaved
dual point setups have the separate stick button bits.

Later we limited this to Dell laptops only because of reports that this
broke things on non Dell laptops. Now it turns out that this breaks things
on the Dell Latitude D600 too. So it seems that only the Dell Latitude
D420/430/620/630, which all share the same touchpad / stick combo,
have these separate bits.

This patch limits the checking of the separate bits to only these models
fixing regressions with other models.
Reported-and-tested-by: NLarry Finger <Larry.Finger@lwfinger.net>
Cc: stable@vger.kernel.org
Tested-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-By: NPali Rohár <pali.rohar@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
      19556219
  27. 26 10月, 2015 4 次提交
  29. 23 10月, 2015 3 次提交
  31. 19 10月, 2015 2 次提交
    • P
      Input: xpad - fix clash of presence handling with LED setting · fbe6a311
      由 Pavel Rojtberg 提交于 
      Do not call xpad_identify_controller at init with wireless devices: it
conflicts with the already sent presence packet and will be called by
xpad360w_process_packet as needed anyway.
Signed-off-by: NPavel Rojtberg <rojtberg@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
      fbe6a311
    • R
      Input: sur40 - add dependency on VIDEO_V4L2 · c8a1978e
      由 Randy Dunlap 提交于 
      Fix build errors due to missing Kconfig dependency.

drivers/built-in.o: In function `sur40_disconnect':
sur40.c:(.text+0x22be6e): undefined reference to `video_unregister_device'
sur40.c:(.text+0x22be77): undefined reference to `v4l2_device_unregister'
drivers/built-in.o: In function `sur40_process_video':
sur40.c:(.text+0x22c1d4): undefined reference to `v4l2_get_timestamp'
drivers/built-in.o: In function `sur40_probe':
sur40.c:(.text+0x22ca82): undefined reference to `v4l2_device_register'
sur40.c:(.text+0x22cb1a): undefined reference to `v4l2_device_unregister'
sur40.c:(.text+0x22cbf7): undefined reference to `video_device_release_empty'
sur40.c:(.text+0x22cc53): undefined reference to `__video_register_device'
sur40.c:(.text+0x22cc90): undefined reference to `video_unregister_device'
drivers/built-in.o: In function `sur40_vidioc_querycap':
sur40.c:(.text+0x22ccb0): undefined reference to `video_devdata'
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
      c8a1978e
  33. 18 10月, 2015 1 次提交
    • V
      Input: lpc32xx_ts - fix warnings caused by enabling unprepared clock · 32470060
      由 Vladimir Zapolskiy 提交于 
      If common clock framework is configured, the driver generates a warning,
which is fixed by this change:

    root@devkit3250:~# cat /dev/input/touchscreen0
    ------------[ cut here ]------------
    WARNING: CPU: 0 PID: 720 at drivers/clk/clk.c:727 clk_core_enable+0x2c/0xa4()
    Modules linked in: sc16is7xx snd_soc_uda1380
    CPU: 0 PID: 720 Comm: cat Not tainted 4.3.0-rc2+ #199
    Hardware name: LPC32XX SoC (Flattened Device Tree)
    Backtrace:
    [<>] (dump_backtrace) from [<>] (show_stack+0x18/0x1c)
    [<>] (show_stack) from [<>] (dump_stack+0x20/0x28)
    [<>] (dump_stack) from [<>] (warn_slowpath_common+0x90/0xb8)
    [<>] (warn_slowpath_common) from [<>] (warn_slowpath_null+0x24/0x2c)
    [<>] (warn_slowpath_null) from [<>] (clk_core_enable+0x2c/0xa4)
    [<>] (clk_core_enable) from [<>] (clk_enable+0x24/0x38)
    [<>] (clk_enable) from [<>] (lpc32xx_setup_tsc+0x18/0xa0)
    [<>] (lpc32xx_setup_tsc) from [<>] (lpc32xx_ts_open+0x14/0x1c)
    [<>] (lpc32xx_ts_open) from [<>] (input_open_device+0x74/0xb0)
    [<>] (input_open_device) from [<>] (evdev_open+0x110/0x16c)
    [<>] (evdev_open) from [<>] (chrdev_open+0x1b4/0x1dc)
    [<>] (chrdev_open) from [<>] (do_dentry_open+0x1dc/0x2f4)
    [<>] (do_dentry_open) from [<>] (vfs_open+0x6c/0x70)
    [<>] (vfs_open) from [<>] (path_openat+0xb4c/0xddc)
    [<>] (path_openat) from [<>] (do_filp_open+0x40/0x8c)
    [<>] (do_filp_open) from [<>] (do_sys_open+0x124/0x1c4)
    [<>] (do_sys_open) from [<>] (SyS_open+0x2c/0x30)
    [<>] (SyS_open) from [<>] (ret_fast_syscall+0x0/0x38)
Signed-off-by: NVladimir Zapolskiy <vz@mleia.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
      32470060
  35. 17 10月, 2015 5 次提交