- 07 8月, 2011 15 次提交
-
-
由 Linus Torvalds 提交于
The inode structure layout is largely random, and some of the vfs paths really do care. The path lookup in particular is already quite D$ intensive, and profiles show that accessing the 'inode->i_op->xyz' fields is quite costly. We already optimized the dcache to not unnecessarily load the d_op structure for members that are often NULL using the DCACHE_OP_xyz bits in dentry->d_flags, and this does something very similar for the inode ops that are used during pathname lookup. It also re-orders the fields so that the fields accessed by 'stat' are together at the beginning of the inode structure, and roughly in the order accessed. The effect of this seems to be in the 1-2% range for an empty kernel "make -j" run (which is fairly kernel-intensive, mostly in filename lookup), so it's visible. The numbers are fairly noisy, though, and likely depend a lot on exact microarchitecture. So there's more tuning to be done. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Gcc tends to generate better code with small integers, including the DCACHE_xyz flag tests - so move the common ones to be first in the list. Also just remove the unused DCACHE_INOTIFY_PARENT_WATCHED and DCACHE_AUTOFS_PENDING values, their users no longer exists in the source tree. And add a "unlikely()" to the DCACHE_OP_COMPARE test, since we want the common case to be a nice straight-line fall-through. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: Compute protocol sequence numbers and fragment IDs using MD5. crypto: Move md5_transform to lib/md5.c
-
由 David S. Miller 提交于
Computers have become a lot faster since we compromised on the partial MD4 hash which we use currently for performance reasons. MD5 is a much safer choice, and is inline with both RFC1948 and other ISS generators (OpenBSD, Solaris, etc.) Furthermore, only having 24-bits of the sequence number be truly unpredictable is a very serious limitation. So the periodic regeneration and 8-bit counter have been removed. We compute and use a full 32-bit sequence number. For ipv6, DCCP was found to use a 32-bit truncated initial sequence number (it needs 43-bits) and that is fixed here as well. Reported-by: NDan Kaminsky <dan@doxpara.com> Tested-by: NWilly Tarreau <w@1wt.eu> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
We are going to use this for TCP/IP sequence number and fragment ID generation. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: cope with negative dentries in cifs_get_root cifs: convert prefixpath delimiters in cifs_build_path_to_root CIFS: Fix missing a decrement of inFlight value cifs: demote DFS referral lookup errors to cFYI Revert "cifs: advertise the right receive buffer size to the server"
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6由 Linus Torvalds 提交于
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM / Runtime: Allow _put_sync() from interrupts-disabled context PM / Domains: Fix pm_genpd_poweron()
-
由 Linus Torvalds 提交于
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (38 commits) acer-wmi: support Lenovo ideapad S205 wifi switch acerhdf.c: spaces in aliased changed to * platform-drivers-x86: ideapad-laptop: add missing ideapad_input_exit in ideapad_acpi_add error path x86 driver: fix typo in TDP override enabling Platform: fix samsung-laptop DMI identification for N150/N210/220/N230 dell-wmi: Add keys for Dell XPS L502X platform-drivers-x86: samsung-q10: make dmi_check_callback return 1 Platform: Samsung Q10 backlight driver platform-drivers-x86: intel_scu_ipc: convert to DEFINE_PCI_DEVICE_TABLE platform-drivers-x86: intel_rar_register: convert to DEFINE_PCI_DEVICE_TABLE platform-drivers-x86: intel_menlow: add missing return AE_OK for intel_menlow_register_sensor() platform-drivers-x86: intel_mid_thermal: fix memory leak platform-drivers-x86: msi-wmi: add missing sparse_keymap_free in msi_wmi_init error path Samsung Laptop platform driver: support N510 asus-wmi: add uwb rfkill support asus-wmi: add gps rfkill support asus-wmi: add CWAP support and clarify the meaning of WAPF bits asus-wmi: return proper value in store_cpufv() asus-wmi: check for temp1 presence asus-wmi: add thermal sensor ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen由 Linus Torvalds 提交于
* 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/trace: Fix compile error when CONFIG_XEN_PRIVILEGED_GUEST is not set xen: Fix misleading WARN message at xen_release_chunk xen: Fix printk() format in xen/setup.c xen/tracing: it looks like we wanted CONFIG_FTRACE xen/self-balloon: Add dependency on tmem. xen/balloon: Fix compile errors - missing header files. xen/grant: Fix compile warning. xen/pciback: remove duplicated #include
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: Battery: sysfs_remove_battery(): possible circular locking
-
由 John Stanley 提交于
Two additional savage4 variants were added, but the S3_SAVAGE4_SERIES macro was incompletely modified, resulting in a false positive detection of a savage4 card regardless of which savage card is actually present. For non-savage4 series cards, such as a Savage/IX-MV card, this results in garbled video and/or a hard-hang at boot time. Fix this by changing an '||' to an '&&' in the S3_SAVAGE4_SERIES macro. Signed-off-by: NJohn P. Stanley <jpsinthemix@verizon.net> Reviewed-by: NTormod Volden <debian.tormod@gmail.com> [ The macros have incomplete parenthesis too, but whatever .. -Linus ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Josh Triplett 提交于
Patch reviewers now recommend not splitting long user-visible strings, such as printk messages, even if they exceed 80 columns. This avoids breaking grep. However, that recommendation did not actually appear anywhere in Documentation/CodingStyle. See, for example, the thread at http://news.gmane.org/find-root.php?message_id=%3c1312215262.11635.15.camel%40Joe%2dLaptop%3eSigned-off-by: NJosh Triplett <josh@joshtriplett.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
The CLOEXE bit is magical, and for performance (and semantic) reasons we don't actually maintain it in the file descriptor itself, but in a separate bit array. Which means that when we show f_flags, the CLOEXE status is shown incorrectly: we show the status not as it is now, but as it was when the file was opened. Fix that by looking up the bit properly in the 'fdt->close_on_exec' bit array. Uli needs this in order to re-implement the pfiles program: "For normal file descriptors (not sockets) this was the last piece of information which wasn't available. This is all part of my 'give Solaris users no reason to not switch' effort. I intend to offer the code to the util-linux-ng maintainers." Requested-by: NUlrich Drepper <drepper@akkadia.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
WARN_ONCE() is very annoying, in that it shows the stack trace that we don't care about at all, and also triggers various user-level "kernel oopsed" logic that we really don't care about. And it's not like the user can do anything about the applications (sshd) in question, it's a distro issue. Requested-by: Andi Kleen <andi@firstfloor.org> (and many others) Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mandeep Singh Baines 提交于
For ChromiumOS, we use SHA-1 to verify the integrity of the root filesystem. The speed of the kernel sha-1 implementation has a major impact on our boot performance. To improve boot performance, we investigated using the heavily optimized sha-1 implementation used in git. With the git sha-1 implementation, we see a 11.7% improvement in boot time. 10 reboots, remove slowest/fastest. Before: Mean: 6.58 seconds Stdev: 0.14 After (with git sha-1, this patch): Mean: 5.89 seconds Stdev: 0.07 The other cool thing about the git SHA-1 implementation is that it only needs 64 bytes of stack for the workspace while the original kernel implementation needed 320 bytes. Signed-off-by: NMandeep Singh Baines <msb@chromium.org> Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Cc: Nicolas Pitre <nico@cam.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: linux-crypto@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 06 8月, 2011 25 次提交
-
-
由 Len Brown 提交于
-
由 Sergey Senozhatsky 提交于
Commit 9c921c22 Author: Lan Tianyu <tianyu.lan@intel.com> ACPI / Battery: Resolve the race condition in the sysfs_remove_battery() fixed BUG https://bugzilla.kernel.org/show_bug.cgi?id=35642 , but as a side effect made lockdep unhappy with sysfs_remove_battery(): [14818.477168] [14818.477170] ======================================================= [14818.477200] [ INFO: possible circular locking dependency detected ] [14818.477221] 3.1.0-dbg-07865-g1280ea8-dirty #668 [14818.477236] ------------------------------------------------------- [14818.477257] s2ram/1599 is trying to acquire lock: [14818.477276] (s_active#8){++++.+}, at: [<ffffffff81169147>] sysfs_addrm_finish+0x31/0x5a [14818.477323] [14818.477325] but task is already holding lock: [14818.477350] (&battery->lock){+.+.+.}, at: [<ffffffffa0047278>] sysfs_remove_battery+0x10/0x4b [battery] [14818.477395] [14818.477397] which lock already depends on the new lock. [14818.477399] [..] [14818.479121] stack backtrace: [14818.479148] Pid: 1599, comm: s2ram Not tainted 3.1.0-dbg-07865-g1280ea8-dirty #668 [14818.479175] Call Trace: [14818.479198] [<ffffffff814828c3>] print_circular_bug+0x293/0x2a4 [14818.479228] [<ffffffff81070cb5>] __lock_acquire+0xfe4/0x164b [14818.479260] [<ffffffff81169147>] ? sysfs_addrm_finish+0x31/0x5a [14818.479288] [<ffffffff810718d2>] lock_acquire+0x138/0x1ac [14818.479316] [<ffffffff81169147>] ? sysfs_addrm_finish+0x31/0x5a [14818.479345] [<ffffffff81168a79>] sysfs_deactivate+0x9b/0xec [14818.479373] [<ffffffff81169147>] ? sysfs_addrm_finish+0x31/0x5a [14818.479405] [<ffffffff81169147>] sysfs_addrm_finish+0x31/0x5a [14818.479433] [<ffffffff81167bc5>] sysfs_hash_and_remove+0x54/0x77 [14818.479461] [<ffffffff811681b9>] sysfs_remove_file+0x12/0x14 [14818.479488] [<ffffffff81385bf8>] device_remove_file+0x12/0x14 [14818.479516] [<ffffffff81386504>] device_del+0x119/0x17c [14818.479542] [<ffffffff81386575>] device_unregister+0xe/0x1a [14818.479570] [<ffffffff813c6ef9>] power_supply_unregister+0x23/0x27 [14818.479601] [<ffffffffa004729c>] sysfs_remove_battery+0x34/0x4b [battery] [14818.479632] [<ffffffffa004778f>] battery_notify+0x2c/0x3a [battery] [14818.479662] [<ffffffff8148fe82>] notifier_call_chain+0x74/0xa1 [14818.479692] [<ffffffff810624b4>] __blocking_notifier_call_chain+0x6c/0x89 [14818.479722] [<ffffffff810624e0>] blocking_notifier_call_chain+0xf/0x11 [14818.479751] [<ffffffff8107e40e>] pm_notifier_call_chain+0x15/0x27 [14818.479770] [<ffffffff8107ee1a>] enter_state+0xa7/0xd5 [14818.479782] [<ffffffff8107e341>] state_store+0xaa/0xc0 [14818.479795] [<ffffffff8107e297>] ? pm_async_store+0x45/0x45 [14818.479807] [<ffffffff81248837>] kobj_attr_store+0x17/0x19 [14818.479820] [<ffffffff81167e27>] sysfs_write_file+0x103/0x13f [14818.479834] [<ffffffff81109037>] vfs_write+0xad/0x13d [14818.479847] [<ffffffff811092b2>] sys_write+0x45/0x6c [14818.479860] [<ffffffff81492f92>] system_call_fastpath+0x16/0x1b This patch introduces separate lock to struct acpi_battery to grab in sysfs_remove_battery() instead of battery->lock. So fix by Lan Tianyu is still there, we just grab independent lock. Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Tested-by: NLan Tianyu <tianyu.lan@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Kevin Hilman 提交于
Currently the use of pm_runtime_put_sync() is not safe from interrupts-disabled context because rpm_idle() will release the spinlock and enable interrupts for the idle callbacks. This enables interrupts during a time where interrupts were expected to be disabled, and can have strange side effects on drivers that expected interrupts to be disabled. This is not a bug since the documentation clearly states that only _put_sync_suspend() is safe in IRQ-safe mode. However, pm_runtime_put_sync() could be made safe when in IRQ-safe mode by releasing the spinlock but not re-enabling interrupts, which is what this patch aims to do. Problem was found when using some buggy drivers that set pm_runtime_irq_safe() and used _put_sync() in interrupts-disabled context. Reported-by: NColin Cross <ccross@google.com> Tested-by: NNishanth Menon <nm@ti.com> Signed-off-by: NKevin Hilman <khilman@ti.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Rafael J. Wysocki 提交于
The local variable ret is defined twice in pm_genpd_poweron(), which causes this function to always return 0, even if the PM domain's .power_on() callback fails, in which case an error code should be returned. Remove the wrong second definition of ret and additionally remove an unnecessary definition of wait from pm_genpd_poweron(). Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Lee, Chun-Yi 提交于
The AMW0 function in acer-wmi works on Lenovo ideapad S205 for control the wifi hardware state. We also found there have a 0x78 EC register exposes the state of wifi hardware switch on the machine. So, add this patch to support Lenovo ideapad S205 wifi hardware switch in acer-wmi driver. Reference: bko#37892 https://bugzilla.kernel.org/show_bug.cgi?id=37892 Cc: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Matthew Garrett <mjg@redhat.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Corentin Chary <corentincj@iksaif.net> Cc: Thomas Renninger <trenn@suse.de> Tested-by: NFlorian Heyer <heyho@flanto.de> Signed-off-by: NLee, Chun-Yi <jlee@suse.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Anton V. Boyarshinov 提交于
It seems that aliases shouldn't contain spaces, as module-init-tools uses them as delimeters in module.alias file Signed-off-by: NAnton V. Boyarshinov <boyarsh@altlinux.org> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Axel Lin 提交于
In the case of ideapad_backlight_init() failure, we need to free the resources allocated by ideapad_input_init(). Aslo drop __devexit annotation for ideapad_input_exit() because we also call it in ideapad_acpi_add() error path. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Jesse Barnes 提交于
When enabling turbo, we need to set both the TDC and TDP bits. IIRC only the TDC one actually matters, but fix it up anyway since the current code is confusing. Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Thomas Courbon 提交于
Some samsung latop of the N150/N2{10,20,30} serie are badly detected by the samsung-laptop platform driver, see bug # 36082. It appears that N230 identifies itself as N150/N210/N220/N230 whereas the other identify themselves as N150/N210/220. This patch attemtp fix #36082 allowing correct identification for all the said netbook model. Reported-by: NDaniel Eklöf <daniel@ekloef.se> Signed-off-by: NThomas Courbon <thcourbon@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Seth Forshee 提交于
All of these keys are being reported on the keyboard controller but are also generating WMI events. Add them to the legacy keymap to silence the noise. BugLink: http://bugs.launchpad.net/bugs/815914Signed-off-by: NSeth Forshee <seth.forshee@canonical.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Axel Lin 提交于
We only care about if there is any successful match from the dmi table or no match at all, we can make dmi_check_system return immediately if we have a successful match instead of iterate thorough the whole table. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Frederick van der Wyck 提交于
This adds backlight control on the Samsung Q10 laptop, which does not support the SABI interface. Also tested successfully on the Dell Latitude X200. Signed-off-by: NFrederick van der Wyck <fvanderwyck@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Axel Lin 提交于
Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Axel Lin 提交于
And also remove unused variable 'my_id_table'. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Axel Lin 提交于
Otherwise, the error path will always be executed. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Axel Lin 提交于
The memory for td_info which is allocated in initialize_sensor() should be properly kfreed in mid_thermal_probe() error patch and mid_thermal_remove(). Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Axel Lin 提交于
Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 J Witteveen 提交于
The N510 benefits from this code as well. Below is a patch to include support. Signed-off-by: NJouke Witteveen <j.witteveen@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
ref: http://dev.iksaif.net/projects/3/wiki/Asus-laptop_WAPFSigned-off-by: NCorentin Chary <corentin.chary@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
Cc: stable@kernel.org Signed-off-by: NCorentin Chary <corentin.chary@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-