- 15 8月, 2009 12 次提交
-
-
由 Benny Halevy 提交于
s/READ64\(\*(.*)\)/p = xdr_decode_hyper(p, \1)/ s/READ64\((.*)\)/p = xdr_decode_hyper(p, &\1)/ Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Benny Halevy 提交于
s/READ32\((.*)\)/\1 = be32_to_cpup(p++)/ Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Benny Halevy 提交于
use encode_string where appropriate. Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Benny Halevy 提交于
do not increment encoding ptr if not needed. Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Benny Halevy 提交于
In order to open code and expose the result pointer assignment. Alternatively, we can open code the call to xdr_reserve_space and do the BUG_ON an the error case at the call site. Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Benny Halevy 提交于
This is already done by xdr_reserve_space and since encode_compound_hdr is adding a byte count to "12" which is already word aligned, the xdr level rounding will work just as well. Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Benny Halevy 提交于
Coalesce multilpe constant RESERVE_SPACEs into one Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Benny Halevy 提交于
s/WRITEMEM(/p = xdr_encode_opaque_fixed(p, / Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Benny Halevy 提交于
s/WRITE64/p = xdr_encode_hyper(p, / Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Benny Halevy 提交于
s/WRITE32/*p++ = cpu_to_be32/ Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Benny Halevy 提交于
ntohl is already defined as be32_to_cpu. be64_to_cpu has architecture specific optimized implementations. Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Benny Halevy 提交于
htonl is already defined as cpu_to_be32. cpu_to_be64 has architecture specific optimized implementations. Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 14 8月, 2009 9 次提交
-
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
free_irq() can remove an irqaction while the corresponding interrupt is in progress, but free_irq() sets action->thread to NULL unconditionally, which might lead to a NULL pointer dereference in handle_IRQ_event() when the hard interrupt context tries to wake up the handler thread. Prevent this by moving the thread stop after synchronize_irq(). No need to set action->thread to NULL either as action is going to be freed anyway. This fixes a boot crash reported against preempt-rt which uses the mainline irq threads code to implement full irq threading. [ tglx: removed local irqthread variable ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Linus Torvalds 提交于
Merge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf_counter: Report the cloning task as parent on perf_counter_fork() perf_counter: Fix an ipi-deadlock perf: Rework/fix the whole read vs group stuff perf_counter: Fix swcounter context invariance perf report: Don't show unresolved DSOs and symbols when -S/-d is used perf tools: Add a general option to enable raw sample records perf tools: Add a per tracepoint counter attribute to get raw sample perf_counter: Provide hw_perf_counter_setup_online() APIs perf list: Fix large list output by using the pager perf_counter, x86: Fix/improve apic fallback perf record: Add missing -C option support for specifying profile cpu perf tools: Fix dso__new handle() to handle deleted DSOs perf tools: Fix fallback to cplus_demangle() when bfd_demangle() is not available perf report: Show the tid too in -D perf record: Fix .tid and .pid fill-in when synthesizing events perf_counter, x86: Fix generic cache events on P6-mobile CPUs perf_counter, x86: Fix lapic printk message
-
由 Linus Torvalds 提交于
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: futex: Fix handling of bad requeue syscall pairing futex: Fix compat_futex to be same as futex for REQUEUE_PI locking, sched: Give waitqueue spinlocks their own lockdep classes futex: Update futex_q lock_ptr on requeue proxy lock
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Fix oops in identify_cpu() on CPUs without CPUID x86: Clear incorrectly forced X86_FEATURE_LAHF_LM flag x86, mce: therm_throt - change when we print messages x86: Add reboot quirk for every 5 series MacBook/Pro
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (22 commits) ocfs2: Fix possible deadlock when extending quota file ocfs2: keep index within status_map[] ocfs2: Initialize the cluster we're writing to in a non-sparse extend ocfs2: Remove redundant BUG_ON in __dlm_queue_ast() ocfs2/quota: Release lock for error in ocfs2_quota_write. ocfs2: Define credit counts for quota operations ocfs2: Remove syncjiff field from quota info ocfs2: Fix initialization of blockcheck stats ocfs2: Zero out padding of on disk dquot structure ocfs2: Initialize blocks allocated to local quota file ocfs2: Mark buffer uptodate before calling ocfs2_journal_access_dq() ocfs2: Make global quota files blocksize aligned ocfs2: Use ocfs2_rec_clusters in ocfs2_adjust_adjacent_records. ocfs2: Fix deadlock on umount ocfs2: Add extra credits and access the modified bh in update_edge_lengths. ocfs2: Fail ocfs2_get_block() immediately when a block needs allocation ocfs2: Fix error return in ocfs2_write_cluster() ocfs2: Fix compilation warning for fs/ocfs2/xattr.c ocfs2: Initialize count in aio_write before generic_write_checks ocfs2: log the actual return value of ocfs2_file_aio_write() ...
-
git://neil.brown.name/md由 Linus Torvalds 提交于
* 'for-linus' of git://neil.brown.name/md: md: allow upper limit for resync/reshape to be set when array is read-only md/raid5: Properly remove excess drives after shrinking a raid5/6 md/raid5: make sure a reshape restarts at the correct address. md/raid5: allow new reshape modes to be restarted in the middle. md: never advance 'events' counter by more than 1. Remove deadlock potential in md_open
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6由 Linus Torvalds 提交于
* 'sh/for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: fix i2c init order on ap325rxa V2 sh: fix i2c init order on Migo-R V2 sh: convert processor device setup functions to arch_initcall()
-
由 Linus Torvalds 提交于
kernel_sendpage() does the proper default case handling for when the socket doesn't have a native sendpage implementation. Now, arguably this might be something that we could instead solve by just specifying that all protocols should do it themselves at the protocol level, but we really only care about the common protocols. Does anybody really care about sendpage on something like Appletalk? Not likely. Acked-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NJulien TINNES <julien@cr0.org> Acked-by: NTavis Ormandy <taviso@sdf.lonestar.org> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 8月, 2009 19 次提交
-
-
由 Peter Zijlstra 提交于
A bug in (9f498cc5: perf_counter: Full task tracing) makes profiling multi-threaded apps it go belly up. [ output as: (PID:TID):(PPID:PTID) ] # ./perf report -D | grep FORK 0x4b0 [0x18]: PERF_EVENT_FORK: (3237:3237):(3236:3236) 0xa10 [0x18]: PERF_EVENT_FORK: (3237:3238):(3236:3236) 0xa70 [0x18]: PERF_EVENT_FORK: (3237:3239):(3236:3236) 0xad0 [0x18]: PERF_EVENT_FORK: (3237:3240):(3236:3236) 0xb18 [0x18]: PERF_EVENT_FORK: (3237:3241):(3236:3236) Shows us that the test (27d028de perf report: Update for the new FORK/EXIT events) in builtin-report.c: /* * A thread clone will have the same PID for both * parent and child. */ if (thread == parent) return 0; Will clearly fail. The problem is that perf_counter_fork() reports the actual parent, instead of the cloning thread. Fixing that (with the below patch), yields: # ./perf report -D | grep FORK 0x4c8 [0x18]: PERF_EVENT_FORK: (1590:1590):(1589:1589) 0xbd8 [0x18]: PERF_EVENT_FORK: (1590:1591):(1590:1590) 0xc80 [0x18]: PERF_EVENT_FORK: (1590:1592):(1590:1590) 0x3338 [0x18]: PERF_EVENT_FORK: (1590:1593):(1590:1590) 0x66b0 [0x18]: PERF_EVENT_FORK: (1590:1594):(1590:1590) Which both makes more sense and doesn't confuse perf report anymore. Reported-by: NPekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: paulus@samba.org Cc: Anton Blanchard <anton@samba.org> Cc: Arjan van de Ven <arjan@infradead.org> LKML-Reference: <1250172882.5241.62.camel@twins> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
perf_pending_counter() is called from IRQ context and will call perf_counter_disable(), however perf_counter_disable() uses smp_call_function_single() which doesn't fancy being used with IRQs disabled due to IPI deadlocks. Fix this by making it use the local __perf_counter_disable() call and teaching the counter_sched_out() code about pending disables as well. This should cover the case where a counter migrates before the pending queue gets processed. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Corey J Ashford <cjashfor@us.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: stephane eranian <eranian@googlemail.com> LKML-Reference: <20090813103655.244097721@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Replace PERF_SAMPLE_GROUP with PERF_SAMPLE_READ and introduce PERF_FORMAT_GROUP to deal with group reads in a more generic way. This allows you to get group reads out of read() as well. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Corey J Ashford <cjashfor@us.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: stephane eranian <eranian@googlemail.com> LKML-Reference: <20090813103655.117411814@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
perf_swcounter_is_counting() uses a lock, which means we cannot use swcounters from NMI or when holding that particular lock, this is unintended. The below removes the lock, this opens up race window, but not worse than the swcounters already experience due to RCU traversal of the context in perf_swcounter_ctx_event(). This also fixes the hard lockups while opening a lockdep tracepoint counter. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: stephane eranian <eranian@googlemail.com> Cc: Corey J Ashford <cjashfor@us.ibm.com> LKML-Reference: <1250149915.10001.66.camel@twins> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Arnaldo Carvalho de Melo 提交于
We're interested in just those symbols/DSOs, so filter out the unresolved ones. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20090812211957.GE3495@ghostprotocols.net> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Frederic Weisbecker 提交于
While we can enable the perf sample records per tracepoint counter, we may also want to enable this option for every tracepoint counters to open, so that we don't need to add a :record flag for all of them. Add the -R, --raw-samples options for this purpose. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1250152039-7284-2-git-send-email-fweisbec@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Frederic Weisbecker 提交于
Add a new flag field while opening a tracepoint perf counter: -e tracepoint_subsystem:tracepoint_name:flags This is intended to be generic although for now it only supports the r[e[c[o[r[d]]]]] flag: ./perf record -e workqueue:workqueue_insertion:record ./perf record -e workqueue:workqueue_insertion:r will have the same effect: enabling the raw samples record for the given tracepoint counter. In the future, we may want to support further flags, separated by commas. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1250152039-7284-1-git-send-email-fweisbec@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Provide weak aliases for hw_perf_counter_setup_online(). This is used by the BTS patches (for v2.6.32), but it interacts with fixes so propagate this upstream. (it has no effect as of yet) Also export perf_counter_output() to architecture code. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Arnaldo Carvalho de Melo 提交于
When /sys/kernel/debug is mounted the list can be imense, so use the pager like the other tools. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20090812174459.GB3495@ghostprotocols.net> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Magnus Damm 提交于
Convert the AP325RXA board code to register devices at arch_initcall() time instead of device_initcall(). This fix unbreaks pcf8563 RTC driver support. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Convert the Migo-R board code to register devices at arch_initcall() time instead of __initcall(). This fix unbreaks migor_ts touch screen driver support. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Convert the processor platform device setup functions from __initcall() and sometimes device_initcall() to arch_initcall(). This makes sure that the platform devices are registered a bit earlier so the devices are available when drivers register using initcall levels earlier than device_initcall(). A good example is platform devices needed by i2c-sh_mobile.c which registers a bit earlier using subsys_initcall(). Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 NeilBrown 提交于
Normally we only allow the upper limit for a reshape to be decreased when the array not performing a sync/recovery/reshape, otherwise there could be races. But if an array is part-way through a reshape when it is assembled the reshape is started immediately leaving no window to set an upper bound. If the array is started read-only, the reshape will be suspended until the array becomes writable, so that provides a window during which it is perfectly safe to reduce the upper limit of a reshape. So: allow the upper limit (sync_max) to be reduced even if the reshape thread is running, as long as the array is still read-only. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
We were removing the drives, from the array, but not removing symlinks from /sys/.... and not marking the device as having been removed. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
This "if" don't allow for the possibility that the number of devices doesn't change, and so sector_nr isn't set correctly in that case. So change '>' to '>='. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
md/raid5 doesn't allow a reshape to restart if it involves writing over the same part of disk that it would be reading from. This happens at the beginning of a reshape that increases the number of devices, at the end of a reshape that decreases the number of devices, and continuously for a reshape that does not change the number of devices. The current code is correct for the "increase number of devices" case as the critical section at the start is handled by userspace performing a backup. It does not work for reducing the number of devices, or the no-change case. For 'reducing', we need to invert the test. For no-change we cannot really be sure things will be safe, so simply require the array to be read-only, which is how the user-space code which carefully starts such arrays works. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
When assembling arrays, md allows two devices to have different event counts as long as the difference is only '1'. This is to cope with a system failure between updating the metadata on two difference devices. However there are currently times when we update the event count by 2. This was done to keep the event count even when the array is clean and odd when it is dirty, which allows us to avoid writing common update to spare devices and so allow those spares to go to sleep. This is bad for the above reason. So change it to never increase by two. This means that the alignment between 'odd/even' and 'clean/dirty' might take a little longer to attain, but that is only a small cost. The spares will get a few more updates but that will still be spared (;-) most updates and can still go to sleep. Prior to this patch there was a small chance that after a crash an array would fail to assemble due to the overly large event count mismatch. Signed-off-by: NNeilBrown <neilb@suse.de>
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: Remove double removal of blktrace directory
-
由 Alan D. Brunelle 提交于
commit fd51d251 Author: Stefan Raspl <raspl@linux.vnet.ibm.com> Date: Tue May 19 09:59:08 2009 +0200 blktrace: remove debugfs entries on bad path added in an explicit invocation of debugfs_remove for bt->dir, in blk_remove_buf_file_callback we are also getting the directory removed. On occasion I am seeing memory corruption that I have bisected down to this commit. [The testing involves a (long) series of I/O benchmarks with blktrace invoked around the actual runs.] I believe that this committed patch is correct, but the problem actually lies in the code in blk_remove_buf_file_callback. With this patch I am able to consistently get complete runs whereas previously I could not get a single run to complete. The first part of the patch simply moves the debugfs_remove below the relay_close: the relay_close call will remove files under bt->dir, and so we should not remove the directory until all the files we created have been removed. (Note: This is not sufficient to fix the problem - the file system code has ref counts on the directoy, so our invocation does not cause the directory to actually be removed. Nonetheless, we should not rely upon that feature.) Signed-off-by: NAlan D. Brunelle <alan.brunelle@hp.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-